Universal Electronics 3040 Intel Copper Trail Remote 2012 User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1886390
Application ID	LwkuZaCAPwKKcRc93BWt2g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.09kB (88673 bits)
Date Submitted	2013-01-24 00:00:00
Date Available	2013-01-24 00:00:00
Creation Date	2013-01-15 14:51:46
Producing Software	Acrobat Distiller 9.5.2 (Windows)
Document Lastmod	2013-01-18 14:36:47
Document Title	Microsoft Word - Document1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jmendez

Intel Copper Trail Remote 2012
Regulatory Information
To be included in the documentation shipped with the system.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Make sure the TV receiver of monitor is mounted to the
wall, furniture or stand as required by the manufacturer
to maintain stability and prevent tip over if accessible
to children, before installing this unit. Large TV can cause
severe injury or death if pulled over and fall upon small children.
Carefully route cords away from areas accessible by young
children to reduce the chance of the cords being pulled
and causing the unit from falling off the TV or resulting
in the TV and unit being pulled off the mounting surface.
Large TV can cause severe injury or death if pulled over
and fall upon small children.
LITHIUM COIN CELL SAFETY NOTICE: KEEP COIN CELL BATTERIES OUT OF REACH OF CHILDREN, coin cell
batteries can be accidentally ingested. If ingested, these batteries may leak harmful contents causing
chemical burns, perforation of soft tissue, and in severe cases may cause death. Lithium coin batteries
must be removed immediately if swallowed. Seek medical attention immediately. If you or your doctor
suspects that a battery has been ingested‐for assistance in the US call the NATIONAL BATTERY
INGESTION HOTLINE any time at (202) 625‐3333: in Canada call 416‐813‐5900.
Protect the power cords from being walked on
Or crushed or pinched.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the instructions provided.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
If the provided power supply plug pins do not fit into
your outlet, consult an electrician for replacement
of the obsolete outlet. Do not plug the power supply
into an extension cord as it is intended to be
connected to the wall outlet.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, for example the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION concerning the Power Cord :
It is recommend that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the same
AC power outlet as this could result in fire or electric
shock.
Do not overload wall outlets, or the power supply receptacle.
Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have them replaced with an exact replacement
part by an authorized servicer. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Keep the product away from direct sunlight.
Cleaning
When cleaning, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not
spray water or other liquids directly on the unit or TV as
electric shock may occur. Do not clean with chemicals
such as alcohol, thinners or benzene.
Ventilation
Install the unit where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other materials
(e.g.) plastic while plugged in. Do not install in
excessively dusty places.
If you smell smoke or other odors coming from the
unit or hear strange sounds, unplug the power cord
contact an authorized service center.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and
receiver.
‐ Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
‐ Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : jmendez
Create Date                     : 2013:01:15 14:51:46-08:00
Modify Date                     : 2013:01:18 14:36:47-08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Microsoft Word - Document1
Creator                         : jmendez
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:01:18 14:36:47-08:00
Producer                        : Acrobat Distiller 9.5.2 (Windows)
Document ID                     : uuid:e87cfa47-dc6b-4704-acaf-f0f8acfc7370
Instance ID                     : uuid:f017e001-185e-461b-929e-6616d67265f3
Page Count                      : 4

EXIF Metadata provided by EXIF.tools