Universal Electronics 4301 Comcast XR5v4 Remote 2014 TI MCU User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2419086
Application ID	86eXY4i2rTJJJSAd1rxM2g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.92kB (923961 bits)
Date Submitted	2014-10-15 00:00:00
Date Available	2014-10-15 00:00:00
Creation Date	2014-10-13 15:58:03
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2014-10-14 10:24:08
Document Title	User Manual
Document Creator	Adobe InDesign CC (Macintosh)

1 Meet Your Remote
2 Turn On Your Remote
Status LED
TV Power
Your remote arrives with the AA batteries already installed,
but not activated. Here is how to power it on for the first time.
3 Pair Remote for “Aim Anywhere” Control
4 Control Your TV’s Power and Volume
All Power
Start
A Pick up your remote and remove the “Pull” tab
(on back) by pulling away from the remote. The
Status LED will blink green four times as the
remote powers up (about 5 seconds).
Search
XFINITY / Menu
Access Guide, Saved,
XFINITY On Demand, Apps,
Search and Settings.
Discover content by
channel, program or key
words.
A Press and hold the Setup button (about 3
seconds) until the Status LED changes from
red to green.
B Press and hold the Setup button (about 3
seconds) until the Status LED changes from
red to green.
B Press the XFINITY button.
Back
C Enter in the first 5-digit code for your TV
manufacturer. The Status LED should blink
green twice.
B Turn on your TV.
C Follow the on-screen instructions to enter the
3-digit code that appears.
C Turn on your set-top box.
Once the code is correctly entered, your
XFINITY Remote is paired with the device.
Number Keys
Use predicitve text (T9) to
quickly search for content.
Setup
Program remote for Aim
Anywhere or to control your
TV or audio device.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not used in accordance with
the instructions, may cause harmful interference to radio
communications.
Control your set-top box without having to point at it, even
when it is inside a cabinet or entertainment center.
A Using the list on the right, find the first
5-digit code for your TV manufacturer.
Remote with Aim Anywhere
FCC Compliance Statement
TV Input
Changes to the next
available input on your TV
(if programmed in Step 4)
Not working? Make sure the battery tab from
your remote is removed, your TV is on and you are
entering the correct 3-digit code on your TV screen.
Need to remove Aim Anywhere control? Press
and hold the Setup button on the remote until the
status LED changes from red to green. Press A on
the remote. If the status LED blinks green twice,
you have successfully removed Aim Anywhere.
D Verify that the code was accepted by using
your remote to adjust volume and turn the
TV on and off.
Not working? Try the second code listed. Still
not working? Visit xfinity.com/remotes for a
complete list of manufacturer codes.
Popular Manufacturer Codes
LG
10178, 11265
Panasonic
10051, 10250
Samsung
10812, 10060
Sanyo
10154, 10159
Sony
10000, 11100
Sharp
10093, 10165
Toshiba
10156, 11156
Vizio
11758, 11756
If your code isn’t listed or you
would like to control an audio
device, visit xfinity.com/remotes.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more
of the following measures:
•
•
•
•
•
Reorient or relocate the receiving antenna.
Increase or decrease the separation between the
equipment and receiver.
Connect the equipment into an outlet on a circuit
different from that which the receiver is connected.
Consult the dealer or an experienced remote control/
TV technician for help.
It is strongly recommended that the TV be plugged
into a separate wall outlet.
The user is cautioned that changes and modifications made
to this equipment without the approval of the manufacturer
could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
1 Conozca su control remoto
2 Encienda su control remoto
Luz LED de estado
Encendido
de televisor
Todo encendido
Su control remoto se le entrega con baterías AA ya instaladas,
pero no activado. A continuación se muestra cómo debe
encenderlo la primera vez.
Inicio
Control remoto con Aim Anywhere
A Tome su control remoto y quite la pestaña “Pull”
(situada en la parte posterior) separándola del
control remoto. La luz LED de estado parpadeará
en verde cuatro veces mientras se enciende el
control remoto (unos 5 segundos).
Buscar
XFINITY/Menú
Acceda a guía, guardados,
XFINITY On Demand, Apps,
búsqueda y configuración.
Busque contenido por
canal, programa o palabras
clave.
Back
C Encienda su decodificador.
Use el texto predictivo (T9)
para buscar contenido con
rapidez/facilidad.
Configuración
Entrada de TV
​ rograme el control remoto
para Aim Anywhere o
controle su TV o equipo
de audio.
​ ambios para la siguiente
entrada disponible en su
televisor (si se programó en
el paso 4).
“Aim Anywhere”
Controle su decodificador sin tener que apuntar hacia él, incluso
si está dentro de un armario o en un centro de entretenimiento.
A Mantenga presionado el botón Setup unos 3
segundos, hasta que la luz LED de estado
cambie de rojo a verde.
4 Controle el encendido y el volumen del televisor
A Encuentre en la lista de la derecha el primer
código de 5 dígitos correspondiente al
fabricante de su televisor.
B Mantenga presionado el botón Setup unos
3 segundos, hasta que la luz LED de estado
cambie de rojo a verde.
B Presione el botón XFINITY.
C Siga las instrucciones en pantalla para ingresar
el código de 3 dígitos que aparece.
B Encienda su televisor.
Teclas de números
3 Sincronice el control remoto para controlar
Una vez que el código se haya ingresado
correctamente, su control remoto de XFINITY
queda sincronizado con el aparato.
¿No funciona? Asegúrese de que ha retirado la
pestaña junto a las baterías de su control remoto, su TV
está encendido y ha ingresado el código de 3 dígitos
correctamente en la pantalla del televisor.
¿Necesita eliminar el control Aim Anywhere? Mantenga
presionado el botón Setup del control remoto hasta que
la luz LED de estado cambie de rojo a verde. Presione A
en el control remoto. Si la luz LED de estado parpadea dos
veces en color verde, eliminó satisfactoriamente el
control Aim Anywhere.
C Ingrese el primer código de 5 dígitos
correspondiente al fabricante. La luz LED
de estado debe parpadear en color verde
dos veces.
D Verifique que el código ha sido aceptado
usando su control remoto para ajustar el
volumen y encender y apagar el televisor.
¿No funciona? Pruebe el segundo código de
la lista. ¿Aún no funciona? Visite xfinity.com/
remotes para una obtener lista completa de
códigos de fabricantes.
Códigos de fabricantes más comunes
LG
10178, 11265
Panasonic
10051, 10250
Samsung
10812, 10060
Sanyo
10154, 10159
Sony
10000, 11100
Sharp
10093, 10165
Toshiba
10156, 11156
Vizio
11758, 11756
Need help?
Visit xfinity.com/xtv
Si su código no está en la lista o le gustaría
controlar un equipo de audio, visite xfinity.com/
remotes.
Keep for future reference, but if you
decide to toss, please recycle.
Get Started Guide v.1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2014:10:13 15:58:03-04:00
Creator                         : Adobe InDesign CC (Macintosh)
Modify Date                     : 2014:10:14 10:24:08-07:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:10:14 10:24:08-07:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Instance ID                     : uuid:46a65bc5-d092-4774-923f-089a4d7fff6a
Original Document ID            : xmp.did:75dcd4b8-1f44-4636-81ef-550d7d0e4c4e
Document ID                     : xmp.id:d4e66ae6-3502-4eb8-9080-9e6b21cc4a14
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:10:13 15:58:03-04:00
Derived From Instance ID        : xmp.iid:d095f235-d11b-49f6-b93c-5477f66a45d0
Derived From Document ID        : xmp.did:68a4772f-9b20-401e-90b8-e8834937083c
Derived From Original Document ID: xmp.did:75dcd4b8-1f44-4636-81ef-550d7d0e4c4e
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools