Universal Electronics 43523 Comcast XR15 Remote UE878 2018 User Manual XR15 FCC manual 082516x

Universal Electronics Inc Comcast XR15 Remote UE878 2018 XR15 FCC manual 082516x

Users Manual

Download: Universal Electronics 43523 Comcast XR15 Remote UE878 2018 User Manual XR15 FCC manual 082516x
Mirror Download [FCC.gov]Universal Electronics 43523 Comcast XR15 Remote UE878 2018 User Manual XR15 FCC manual 082516x
Document ID3934880
Application IDaIrLtuZ8/wk+Ue21eUOaxQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize50kB (624979 bits)
Date Submitted2018-07-23 00:00:00
Date Available2018-07-23 00:00:00
Creation Date2016-08-29 17:53:42
Producing SoftwareMac OS X 10.11.5 Quartz PDFContext
Document Lastmod2016-08-29 17:53:42
Document TitleMicrosoft Word - XR15 FCC manual 082516.docx
Document CreatorWord

XR15 Voice Remote Control
1 Turn on your remote
FCC Compliance Statement
Your remote arrives with the AA batteries already installed, but
not activated. Here is how to power it on for the first time.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not used in accordance with the instructions, may
cause harmful interference to radio communications.
1.
2.
3.
Pick up your remote and remove the “Pull” tab (on
back) by pulling away from the remote. The Status LED
will blink green four times as the remote powers up
(about 5 seconds).
Turn on your TV.
Turn on your set-top box.
2 Pair Your Remote for Voice Control
Use voice control to search for networks and shows, set DVR
recordings, and get recommendations. See Step 5 of this guide
for examples.
1.
Press and hold the Xfinity and Info buttons (about 5
seconds) until the Status LED changes from red to
green.
3 Control Your TV’s Power and Volume
Control the power, volume, and input of your TV using your
Xfinity Remote.
1.
Find the 5-digit code for your TV manufacturer.
2.
Press and hold the Xfinity and Info buttons (about 5
seconds) until the Status LED changes from red to
green.
3. Enter the first 5-digit code for your TV manufacturer.
The Status LED should flash green twice.
4. Verify that the code was accepted by using your remote
to adjust volume and turn the TV on and off.
4 Test Voice Control
Once your remote is paired with your set-top box, you can use
voice control.
1.
Press and hold the Voice button until you hear the
audio tone.
2.
Speak a voice command to the remote while
continuing to hold down the button. The Status LED will
be solid blue while you speak your command.
3.
Release the Voice button when your command is
complete. Look at the TV for the results of your voice
command.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase or decrease the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on a circuit
different from that which the receiver is connected.
•
Consult the dealer or an experienced remote control /
TV technician for help.
•
It is strongly recommended that the TV be plugged into
a separate wall outlet.
The user is cautioned that changes and modifications made to this
equipment without the approval of the manufacturer could void
the user’s authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 1
PDF Version                     : 1.4
Title                           : Microsoft Word - XR15 FCC manual 082516.docx
Producer                        : Mac OS X 10.11.5 Quartz PDFContext
Creator                         : Word
Create Date                     : 2016:08:29 17:53:42Z
Modify Date                     : 2016:08:29 17:53:42Z
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MG3-43523

Navigation menu