Universal Electronics 4450 Comcast Xfinity Home Classic Keypad 2015 User Manual
Universal Electronics Inc Comcast Xfinity Home Classic Keypad 2015
User Manual
Security Keypad
Quick Start Guide
XFINITY HOME
SECURITY • CONTROL • ENERGY
Device Overview
Getting Started
Powering Up and Pairing
1. Remove the keypad and keypad battery door
from box. (Important: The battery door must
be mounted to wall before you snap keypad to
battery door)
2. Set your touch screen to pairing mode and then
pull the “Remove to Pair” tab to put device into
pairing mode.
3. The keypad should start the joining process
automatically. When the keypad is not joined
to a network, the network indicator will be off.
Once it is joined, the network icon will become
solid anytime that the keypad is awake.
Once the keypad has successfully joined the
network, the pairing LED will turn solid, the
network indicator will turn on, and the touch
screen should indicate that it has paired with
the keypad.
Battery Compartment
Low Battery
Network Indicator Status LED/Proximity Sensor
Pairing/Tamper Button
Approvals
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide a
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiated radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet or a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
The user is cautioned that changes and modifications made to
the equipment without approval of manufacturer could void the
users authority to operate this equipment.
Change to Conforms to UL STDS 1023 & 1610
Mounting
Mount the keypad battery door to the wall in the
desired location using the included mounting screws
and anchors. Align the keypad to battery door and
snap keypad onto battery door. (XFINITY® HOME
technicians MUST use screws to install keypad).
Status
There is one system status LED located at the bottom
of the Security Keypad. Different colors represent the
following system status:
Green: Ready/Not Armed Red: Armed
Orange: Not Ready
Arming
Arm Stay Button
Press this button and enter your 4 digit
security code to arm in stay mode.
Arm Away Button
Press this button and enter your 4 digit
security code to arm in away mode.
Arm Night Button
Press this button and enter your 4 digit
security code to arm in night mode.
Replacing Batteries
1. View battery level indicator to determine if batteries
need replacement. Battery level indicator will display
when batteries have less than 60 days of use
remaining.
2. Pull keypad away from wall to remove from battery
door.
3. Remove the old batteries then install AA Lithium
batteries.
a. Lithium batteries which came with device are not
rechargeable.
4. Align the keypad to battery door and snap keypad
onto battery door.
Weekly Testing
To ensure that your system continues to functioning
as intended, you must test your system weekly.
Please contact your security monitoring company for
instructions on how to test your system.
Controls
Function Buttons
A Button: Reserved for future use
B Button: Reserved for future use
Volume Control
There are 5 possible volume levels. To increase the
volume, press and hold the #2 button. To decrease the
volume, press and hold the #5 button. As the volume
raises or lowers, there will be an audible beep signifying
that the volume has changed. Continuing to hold the
#2 or #5 button down will continue to raise or lower the
volume.
Proximity Detection
The keypad is able to detect the user’s presence within
6 inches. Once detected the keypad will awake and
illuminate.
(Lithium batteries do not charge)