Universal Electronics 4869 Comcast XR8 RF4CE Serial Dongle 2012 User Manual UEI Universal RF4CE to Serial Dongle 2013 A02

Download:
Mirror Download [FCC.gov]
Document ID	4045456
Application ID	vcUEMZ7d9jKCZIDTH04ADw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.17kB (927135 bits)
Date Submitted	2018-10-23 00:00:00
Date Available	2018-10-23 00:00:00
Creation Date	2015-01-07 16:09:58
Producing Software	Adobe PDF library 7.77
Document Lastmod	2015-01-07 16:09:58
Document Title	UEI Universal RF4CE to Serial Dongle 2013 A02
Document Creator	Adobe Illustrator CS2

UNIVERSAL
SERIAL ADAPTER
ADAPTER
UNIVERSAL RF4CE
RF4CE SERIAL
MUG4869 REV B
PAIRING RESET
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
Press and hold in the PAIR button for 5 seconds until Red
light blinks twice and release the PAIR button.
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
approval of manufacturer could void the user's authority to operate this equipment.
For Industry Canada
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
For additional support on pairing, please visit us at:
www.urcsupport.com/RF
Tip:
If you are having issues pairing please visit
www.urcsupport.com/rf for a list of set-top boxes that are
not compatible with the RF4CE Adapter.
ADAPTEUR
PAIRING INSTRUCTIONS
PAIRING
INSTRUCTIONS
Make sure Adapter is
connected to the IR port on
the back of the Set-Top Box.
Press and hold SETUP on
the remote control until
LED blinks twice.
Press and release PAIR
button on the Adapter.
Press the MENU key on
the remote control. When
the remote is paired.
IR INPUT
Enter the 5 digit code for
your brand of Set-top box
(see below)
Motorola/Arris
01376
Pace
01982
Cisco
01877
Evolution
02479
Nagravision
02873
Samsung
01877
Scientific Atlanta
Technicolor
01877
COX DTA
01982
04315
DT
IR INPUT
WE
PO
NU
ME
TV
IDE
GU
IT
EX
Tip:
Ensure that the RF4CE Adapter is fully
inserted into the IR port.
Ensure that the remote is an RF remote
by checking the bottom case for an RF
mark and/or FCC ID. If neither are
present, the remote is most likely not
compatible with the RF4CE Adapter.
FO
IN
PAG
TE
MU
LAS
LA
Tip:
NG
Tip:
for your set-top box, the correct 5-digit
code must be entered immediately after
pairing is completed.
ADAPTATEUR SÉRIE UNIVERSEL RF4CE /
ADAPTADOR SERIAL RF4CE UNIVERSAL
CONSEIL/
CONSEJO
RÉINITIALISATION DE L’APPAIRAGE /
REESTABLECER LA ASOCIACIÓN
MUG4869 REV B
Conseil/Consejo:
Assurez-vous que la télécommande est une télécommande RF en
aucune, alors très probablement la télécommande n'est pas compatible
avec l'adaptateur RF4CE.
Appuyez pendant 5 secondes sur le bouton PAIR jusqu’à ce que la
lumière rouge clignote deux fois, puis relâchez.
Presione y sostenga el botón PAIR durante 5 segundos hasta que
la luz roja parpadee dos veces; luego, suelte el botón PAIR.
inferior de la caja las marcas RF o FCC ID. Si no las encuentra, es muy
factible que el control no sea compatible con el adaptador RF4CE.
Conseil/Consejo:
Veillez à ce que l'adaptateur RF4CE soit entièrement inséré dans le port IR.
Asegúrese de que el adaptador RF4CE esté totalmente insertado en el
puerto IR.
Conseil/Consejo:
código de 5 dígitos inmediatamente después de completar la asociación.
Pour une aide supplémentaire sur l'appairage, veuillez vous rendre à :
www.urcsupport.com/RF
Para ayuda adicional sobre cómo asociar dispositvos visítenos en:
www.urcsupport.com/RF
INSTRUCTIONS D’APPAIRAGE / INSTRUCCIONES DE ASOCIACIÓN
Asegúrese de que el adaptador esté enchufado en el
puerto IR en la parte posterior
Appuyez de manière
prolongée sur la touche
SETUP de la
télécommande jusqu’à ce
que la DEL clignote deux
fois, puis relâchez.
Presione y sostenga SETUP
remoto hasta que el LED
parpadee dos veces; luego,
suelte SETUP.
Appuyez momentanément
sur le bouton PAIR de
l’adaptateur.
Oprima y suelte el botón
PAIR (asociar) en el
adaptador.
Appuyez sur la touche
MENU de la télécommande.
L’appairage de la
télécommande est terminé
lorsque la lumière rouge
clignote deux fois.
Presione la tecla MENU en
el control remoto. Cuando
la luz roja parpadee dos
veces el control remoto
estará asociado.
IR INPUT
DTA
ER
POW
NU
ME
TV
IDE
GU
IT
EX
INF
PAG
TE
MU
IR INPUT
Saisissez le code à 5
votre décodeur à partir de
la liste suivante.
Ingrese el código de 5
dígitos correspondiente a
la marca de su
opciones que siguen.
Motorola/Arris
01376
Pace
01982
Cisco
01877
Evolution
02479
Nagravision
02873
Samsung
01877
Scientific Atlanta
Technicolor
01877
LAS
LA
Assurez-vous que l'adaptateur est connecté au port IR
à l’arrière du décodeur.
NG
COX DTA
01982
04315

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2015:01:07 16:09:58-05:00
Create Date                     : 2015:01:07 16:09:58-05:00
Metadata Date                   : 2015:01:07 16:09:58-05:00
Creator Tool                    : Adobe Illustrator CS2
Format                          : application/pdf
Title                           : UEI Universal RF4CE to Serial Dongle 2013 A02
Document ID                     : uuid:6566d756-eb38-4f34-b5cb-2324e142a618
Instance ID                     : uuid:b788d46b-e16f-46f6-a133-65f1810a831e
Producer                        : Adobe PDF library 7.77
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 12.0
For                             : UEIC,
Bounding Box                    : 0 0 792 612
Container Version               : 9
Creator Version                 : 12
AI Creator Version              : 12.0.0
AI Build Number                 : 198
AI Color Usage                  : Color
AI Ruler Units                  : Points
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 1
Image Height                    : 612
Image Width                     : 792
Image Size                      : 792x612
Megapixels                      : 0.485

EXIF Metadata provided by EXIF.tools