Universal Electronics 72400 NEVO S70 REMOTE (2.4GHZ TRANSCEIVER) User Manual NevoSL Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	929885
Application ID	rVk/30fllqMLdoj2XaLWxQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.77kB (159618 bits)
Date Submitted	2008-04-18 00:00:00
Date Available	2008-04-22 00:00:00
Creation Date	2004-11-10 15:27:38
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-04-07 12:03:57
Document Title	NevoSL Quick Start Guide
Document Creator	FrameMaker 7.2
Document Author:	Manual Labour, Inc. for Universal Electronics. All rights reserved.

NevoS70 provides fully-customizable control of all of your home theater,
home automation and digital media content. Its touch-sensitive screen is
software-based, so your installer/integrator can include just those controls
you actually use.
Before You Use NevoS70
Please ensure your Nevo S70 is fully charged before use.
NevoS70 Universal
Controller
Charging Cradle
AC Power
Adapter; varies
by country
To charge your Nevo S70:
1. Connect the power adapter to the
charging cradle and plug the adapter
into a wall outlet.
2. Plug in the battery, power on (On is to
the left), and dock NevoS70 to begin
charging the battery. If it has not already been charged, it will take 3-4
hours to fully charge the battery the first time.
Recharging NevoS70
Nevo S70 includes a Lithium-ion rechargeable battery. NevoS70 beeps and
displays a warning message when the battery is running low. You should dock
Nevo S70 at this time to charge the battery.
You can dismiss the warning message by clicking OK; if you do so and the
battery power becomes critically low, NevoS70 will beep and display a
critical low battery warning message. You cannot dismiss this message and
should dock NevoS70 immediately.
To dock Nevo S70, simply set the controller in the charging cradle. When it
is correctly docked, the blue light will appear on the cradle.
About Battery Life
As with all battery-operated devices, battery life will vary depending on
use. It is a good practice to keep Nevo S70 in its charging cradle when you
are not using it.
Getting to Know NevoS70
NevoS70 offers the following types of controls:
TOUCHSCREEN. To use the touchscreen, gently touch the buttons that
appear on it. If you prefer, slide the stylus from its storage port on the
bottom of Nevo S70:
Stylus
Using the stylus, gently tap buttons on the
touchscreen to control your home theater, home
automation and digital media devices. You may
prefer to always use the stylus when you are
configuring settings. Talk with your installer/
integrator for more information on these settings.
NEVOS70 KEYS. The keys on NevoS70
Function
Keys
have been customized to your
preference by your installer/integrator.
An additional set of unlabeled keys
(function keys) appear immediately
below the touchscreen, above the hard
buttons. A label appears on the
touchscreen above them to indicate the
functions assigned to those keys.
LEFT SIDE
Hard
Keys
Speaker
USB Port
On/Off
Switch
RIGHT SIDE
Jog
Wheel
Reset
Switch
Scroll the jog wheel up and down to move between the screens. Press the
jog wheel in to return to the first page of the current page collection.
If your installer/integrator has enabled it, Nevo S70 provides Media Zones to
control digital media located on a PC with installed media software or on
3rd party hardware-based digital media servers and renderers.
If your installer/integrator has enabled it, Nevo S70 provides an IP Browser
to view web-based devices or sites. Examples include internet cameras for
home monitoring and audio/video servers.
Caring for NevoS70
Use only the stylus or your finger to switch Nevo S70 on or off. Avoid using
sharp objects.Clean your controller with a soft, damp cloth using a gentle, noncaustic cleaner.
CAUTION: Do not use a caustic or abrasive cleaner. This may damage the
surface of your controller.
For more information, contact
your installer/integrator:
Installer/integrator: attach your
business card or business
sticker here.
NOTICE: Nevo, NevoStudio, NevoStudio Pro, Nevo S70 and NevoConnect are registered
trademarks or trademarks of Universal Electronics Inc., in the United States and/or other
countries. Other product and company names may be trademarks of their respective
companies.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
a reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy if not installed and used
in accordance with the instructions, and may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet or a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been verified to comply with the limits for a class B computing device,
pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded
cables must be used with this equipment. Operation with non-approved equipment or
unshielded cables is likely to result in interference to radio and TV reception.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
human’s body proximity to the device should not be less than 2.5 cm during normal operation.
WARNING: Changes or modifications of this equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: MG372400
IC ID: 2575A-URC7240
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The equipment is to be supplied from an identified USB port complying with the
requirements of Limited Power Source.
Corporate Headquarters
Universal Electronics
6101 Gateway Drive
Cypress, CA 90630-4841
714-820-1000
www.uei.com
Copyright © 2008 Universal Electronics Inc
All rights reserved.
International Headquarters
Universal Electronics
Institutenweg 21
7521 PH Enschede
The Netherlands
+31 53.488.8000
www.uei.com
Document version NS70QGP100108

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2008:04:07 12:03:57+08:00
Create Date                     : 2004:11:10 15:27:38Z
Metadata Date                   : 2008:04:07 12:03:57+08:00
Format                          : application/pdf
Title                           : NevoSL Quick Start Guide
Creator                         : Manual Labour, Inc. for Universal Electronics. All rights reserved.
Document ID                     : uuid:b5b37bf2-311d-4b2b-86ee-db9e369089db
Instance ID                     : uuid:09789d95-9b33-44a5-b7d6-74b2560e2f8d
Page Count                      : 4
Author                          : Manual Labour, Inc. for Universal Electronics. All rights reserved.

EXIF Metadata provided by EXIF.tools