Universal Electronics URC033 RF Remote Control User Manual Dolphin Manual

Universal Electronics Inc RF Remote Control Dolphin Manual

Users Manual

Download: Universal Electronics URC033 RF Remote Control User Manual Dolphin Manual
Mirror Download [FCC.gov]Universal Electronics URC033 RF Remote Control User Manual Dolphin Manual
Document ID294882
Application ID2Exi6U9+PRtZKqiaPIy2rA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize68.01kB (850171 bits)
Date Submitted2003-01-10 00:00:00
Date Available2003-01-09 00:00:00
Creation Date2002-12-20 22:04:40
Producing SoftwareAcrobat Distiller 5.0.5 for Macintosh
Document Lastmod2003-01-03 11:32:44
Document TitleDolphin Manual
Document CreatorQuarkXPress.: LaserWriter 8 8.7.1

DolphinTM
Water-Proof Remote Control
Balboa
Instruments
Incorporated
TABLE OF CONTENTS
INTRODUCTION
Introduction . . . . . . . . . . . . . . . . . . . . . . . .3
Features And Functions . . . . . . . . . . . . . . . .4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installing Batteries . . . . . . . . . . . . . . . . . . . .7
Programming TV Control . . . . . . . . . . . . . . .8
Setup Codes for TVs . . . . . . . . . . . . . . . . . . .8
Programming VCR Control . . . . . . . . . . . . .12
Setup Codes for VCRs . . . . . . . . . . . . . . . . .12
Programming TV/VCR Combo Control . . . . .16
Setup Codes for TV/VCRs . . . . . . . . . . . . . .17
Programming Cable Converter
(or DBS Receiver) Control . . . . . . . . . . . . .18
To Unlock the Cable Key . . . . . . . . . . . . . . .18
To Program the Cable Key . . . . . . . . . . . . . .18
To Lock the Cable Key . . . . . . . . . . . . . . . .19
Setup Codes for Cable Converters . . . . . . . .19
Setup Codes for DBS Receivers . . . . . . . . . .20
Programming Channel Control Lock . . . . . .21
To Activate Channel Control Lock . . . . . . . .21
To De-Activate Channel Control Lock . . . . . .21
Programming Audio Control . . . . . . . . . . . .22
Setup Codes for CD Players . . . . . . . . . . . . .23
Setup Codes for DVD Players . . . . . . . . . . .24
Setup Codes for Stereo Receivers . . . . . . . .24
Setup Codes for Stereo Amplifiers . . . . . . . .25
Setup Codes for DBS Audio Services . . . . . .25
Searching For Your Code . . . . . . . . . . . . . .26
Checking The Codes . . . . . . . . . . . . . . . . . .27
Re-Assigning Device Keys . . . . . . . . . . . . . .28
Changing Volume Lock . . . . . . . . . . . . . . . .29
To Change Volume Lock to the CABLE Mode 29
To Change Volume Lock to the TV Mode . . .29
To Change Volume Lock to the VCR Mode . .29
To Change Volume Lock to the RCVR Mode .29
Using the Learning Feature . . . . . . . . . . . . .30
Using the IR/RF Command Center . . . . . . . .32
Specifications . . . . . . . . . . . . . . . . . . . . . .34
Compliance with FCC Rules and Regulations 35
Troubleshooting . . . . . . . . . . . . . . . . . . . . .36
The Universal Dolphin™ Remote is Balboa’s latest
generation remote control. It is designed with
sophisticated technology that will allow you to
consolidate many of your existing remote controls
along with the entertainment system in your spa.
It’s packed with easy-to-use features such as:
• Preprogrammed to operate the cable converter
supplied by your cable system provider
• Preprogrammed technology for easy setup
• Instant “Tune-In”keys for assignment to your
favorite channels
• Color-coded keys to quickly locate popular
functions
• Code library for video and audio components
• Code Search to help program control of older
or discontinued components
• Learning function to allow programming with
another infrared (IR) remote.
• Combination IR and RF (radio frequency)
capability that can send commands, through
the optional RF base station, to devices in
another room.
Before you can use your new remote control, you
will need to program it to operate the specific
home entertainment components you wish to
control. Follow the instructions detailed in this
manual to set up your Dolphin Remote and enjoy
your new remote control.
FEATURES AND FUNCTIONS
Use the illustration below to locate the Dolphin
features and study the key locations (on the next
two pages) to learn how they function.
The LED (red light) blinks to show that the remote
control is working and is sending signals.
Press POWER once to turn on or off the selected
home entertainment component.
Use SETUP for all programming sequences.
Press AUDIO, VCR, TV, or CBL once to select a
home entertainment component to control.
See next page for descriptions of the buttons in
this circular area of the remote
Use volume + (or volume -) to raise (or lower)
the sound volume.
Use CH + (or CH -) to select the next higher (or
lower) channel.
Press MUTE once to turn sound off or on.
Press LAST once to recall the last channel and to
page back one screen in the main menu.
Use the GREEN phosphorescent buttons to control
available spa functions.
Use the keypad (0 ~ 9) to directly select channels
(e.g., 09 or 31).
Press TV/VCR once to switch the VCR to view TV
channels or tape.This key will also control the
input select feature on most TVs.
Press ENTER once after entering channel numbers
on some TV models.
In the VCR and TV modes, use the REW, PLAY, FF,
REC, STOP, and PAUSE keys to control your VCR.
To record a program, press REC twice.
Continued on next page…
FEATURES AND FUNCTIONS
INSTALLING BATTERIES
…Continued
1. On the back of the Dolphin Remote, remove
the screws that hold the battery cover in place
and lift off the battery cover.
Use GUIDE to display the program guide.
Use EXIT to exit out of your cable converter’s
menu and guide.
Use the four directional keys to move the cursor in
the program guide and menu screens.
2 Obtain two (2) fully-charged AA alkaline
batteries.
Match the + and – marks on the batteries to
the + and – marks in the battery case, then
insert the new batteries.
3. Press the battery cover back into place, being
careful to align the rubber seal.
4. Replace the screws that hold the cover by
carefully starting each one without tightening it.
Once they are all started, snug up one screw
and then do the same to the screw on the
opposite side of the door. Repeat this in a
crossing pattern until all screws are snug. Do
not over-tighten them. This will assure an
adequate water seal around the battery door.
Use SELECT/OK to choose options,PPV events, and
to tune programs from the program guide.
Use INFO to display current channel and program
information.
Press MENU once to display your cable converter’s
screen menu.
4. Test the unit by pressing POWER and any mode
key (e.g. AUDIO,VCR, TV, or CBL). If the
batteries are inserted correctly, the LED will
blink once.
NOTE:
Whenever batteries need replacement, the
Dolphin will blink twice with every key press.
Simply replace the batteries and the remote will
be restored to its full functionality, complete
with your favorite settings.
(5)
AA
AA
PROGRAMMING TV CONTROL
NOTE: If you own a TV/VCR combination, skip thi
section and perform “Programming TV/VCR
Combo Control” on page 16.
Locate the brand name of your TV in the Setup
Codes For TVs section below, and write it in the
following space.
TV Brand:
The brands are listed in alphabetical order with
the most popular codes listed first.You will use one
of these codes to program the Dolphin to operate
your TV:
1. Turn on the TV.
On the Dolphin, press TV once. Press and hold
SETUP until the LED blinks twice, then release
SETUP.
3. Enter the first four-digit code for your TV. If you
perform this procedure correctly, the LED will
blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3
and try entering the same code again.
4. Aim the Dolphin at your TV and press POWER
once. The TV should turn off. If it does not
respond, repeat steps 2-3, trying each code for
your brand until you find one that works. If it
still does not work, try searching for the code
(see Searching For Your Code on page 26).
5. Write your TV code in the boxes below for
future reference.
■■■■
NOTE: Remember, to use the Dolphin to operate
your TV, press TV first.
Setup Codes for TVs:
A-Mark
AOC
Abex
Admiral
Adventura
Aiko
Akai
Alaron
Ambassador
Anam
Anam National
Archer
Audiovox
0003
0030, 0019, 0003, 0052, 0185
0032
0093
0046
0092
0030
0179
0177
0180
0055
0003
0451, 0180, 0003, 0092, 0623
Baysonic
Belcor
Bell & Howell
Bradford
Brockwood
Broksonic
CXC
Candle
Carnivale
Carver
Celebrity
Cineral
Citizen
0180
0019
0154, 0016
0180
0019
0236,0463, 0003
0180
0030, 0056, 0046, 0186
0030
0054
0000
0451, 0092
0060, 0030, 0056, 0039, 0046, 0092,
0186, 0280
Clairtone
0185
Concerto
0056
Contec
0180, 0185
Craig
0180
Crosley
0054
Crown
0180, 0039
Curtis Mathes 0047, 0054, 0154, 0051, 0451, 0093,
0060, 0030, 0145, 0056, 0016, 0039,
0166, 0466
Daewoo
0451, 0019, 0039, 0092, 0623, 0624
Daytron
0019
Denon
0145
Dumont
0017, 0019
Dwin
0720, 0774
Electroband
0000, 0185
Emerson
0154, 0236, 0463, 0180, 0282, 0178,
0019, 0179, 0039, 0038, 0177, 0185,
0280, 0623, 0624
Envision
0030
Fisher
0154, 0159
Fujitsu
0179
Funai
0180, 0179, 0171
Futuretech
0180
GE
0047, 0051, 0451, 0093, 0282, 0178,
0021, 0055, 0027, 0135
Gibralter
0017, 0030, 0019
GoldStar
0030, 0178, 0019, 0056, 0001, 0032
Gradiente
0053, 0056
Grunpy
0180,0179
Hallmark
0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard
0180
Hitachi
0145, 0056, 0032, 0038, 0151
Infinity
0054
Inteq
0017
JBL
0054
JCB
0000
JVC
0053
Janeil
0046
KEC
KTV
Kaypani
Kenwood
Kloss
LG
LXI
Logik
Luxman
MEI
MGA
MTC
Magnavox
Majestic
Marantz
Matsushita
Megatron
Memorex
Midland
Minutz
Mitsubishi
Motorola
Multitech
NAD
NEC
NTC
Nikko
Noshi
Onwa
Optimus
Optonica
Orion
Panasonic
Penney
Philco
Philips
Pilot
Pioneer
Portland
Prism
Proscan
Proton
Pulsar
Quasar
RCA
Radio Shack
Realistic
Rhapsody
Runco
10
0180
0180, 0030, 0039, 0185, 0280
0052
0030, 0019
0024, 0046
0056
0047, 0054, 0154, 0156, 0178
0016
0056
0185
0150, 0030, 0178, 0019
0060, 0030, 0019, 0056, 0185
0054,0030, 0179, 0020, 0024, 0096,
0186, 0187, 0386
0016
0054, 0030
0250
0178, 0145, 0003
0154, 0250, 0150, 0178, 0056, 0016
0047, 0017, 0051, 0039, 0032, 0135
0021
0093, 0150, 0178, 0019
0093, 0055
0180
0156, 0178, 0166
0030,0019, 0056, 0497
0092
0030, 0178, 0092
0018
0180
0154, 0250, 0166
0093,0165
0236, 0463, 0179
0051,0250, 0055
0047, 0156, 0051, 0060, 0030, 0178,
0021, 0019, 0018, 0056, 0039, 0003,
0027, 0032, 0135
0054, 0463, 0030, 0145, 0019, 0020,
0096
0054
0030, 0019, 0039
0038, 0166
0019, 0039, 0092
0051
0047
0178, 0003, 0052, 0466
0017, 0019
0051, 0250, 0165, 0055
0047, 0051, 0093, 0019, 0018, 0038,
0090, 0135
0047, 0154, 0165, 0180, 0030, 0178,
0019, 0056, 0039, 0032
0154, 0165, 0180, 0030, 0178, 0019,
0056, 0039, 0032
0185
0017, 0030, 0497
SSS
Sampo
Samsung
Samsux
Sansei
Sansui
Sanyo
Scimitsu
Scotch
Scott
Sears
0180, 0019
0030, 0039, 0032, 0052
0060, 0030, 0178, 0019, 0056, 0032
0039
0451
0463
0154, 0146, 0159
0019
0178
0236, 0180, 0178, 0019, 0179
0047, 0054, 0154, 0156, 0178, 0179,
0056, 0146, 0159, 0171
Semivox
0180
Semp
0156
Sharp
0093, 0165, 0039, 0386
Shogun
0019
Signature
0016
Simpson
0186, 0187
Sony
0000, 0080
Soundesign
0180, 0178, 0179, 0186
Spectricon
0003
Squareview
0171
Starlite
0180
Supre-Macy
0046
Supreme
0000
Sylvania
0054, 0030, 0020, 0096
Symphonic
0171
TMK
0178, 0056, 0177
Tandy
0093
Tatung
0055, 0003
Technics
0051, 0250
Technol Ace
0179
Techwood
0051, 0056, 0003
Teknika
0054, 0180, 0150, 0060, 0019, 0179,
0056, 0016, 0039, 0092, 0186
Telefunken
0056
Toshiba
0154, 0156, 0060
Tosonic
0185
Totevision
0039
Universal
0027
Vector Research 0030
Victor
0053
Vidikron
0054
Vidtech
0178, 0019
Viking
0046
Wards
0054, 0165, 0030, 0178, 0021, 0019,
0179, 0056, 0016, 0020, 0027, 0080,
0096
WhiteWestinghouse 0623, 0624
Yamaha
0030, 0019
Zenith
0017, 0016, 0092
Zonda
0003
11
PROGRAMMING
VCR CONTROL
NOTE: If you own a TV/VCR combination, skip this
section and perform “Programming TV/VCR
Combo Control” on page 16.
Locate the brand name of your VCR in the Setup
Codes For VCRs section below, and write it in the
following space.
VCR Brand:
The brands are listed in alphabetical order with
the most popular codes listed first.You will use one
of these codes to program the Dolphin to operate
your VCR:
1. Turn on your VCR and insert a video cassette.
2. On the Dolphin, press VCR once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your VCR. If
you perform this procedure correctly, the LED
will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3
and try entering the same code again.
4. Aim the Dolphin at your VCR and press POWER
once.The VCR should turn off. If your VCR
remote control does not have a POWER key,
press PLAY. If the VCR does not respond, repeat
steps 2-3, trying each code listed for your
brand until you find one that works. If the VCR
still does not work , try searching for the code
(see Searching For Your Code on page 26).
5. Write your VCR code in the boxes below for
future reference.
■■■■
NOTE: Remember, to use the Dolphin to operate
your VCR, press VCR first.
Setup Codes for VCRs:
Admiral
Adventura
Aiko
Aiwa
Akai
American High
Asha
Audiovox
12
0048
0000
0278
0037, 0000, 0307
0041, 0061, 0106
0035
0240
0037
Beaumark
Bell & Howell
Broksonic
CCE
Calix
Canon
Capehart
Carver
Cineral
Citizen
Colt
Craig
Curtis Mathes
Cybernex
Daewoo
Daytron
Denon
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
0240
0104
0184, 0121, 0209, 0002,
0072, 0278
0037
0035
0020
0081
0278
0037, 0278
0072
0037, 0047, 0240, 0072, 0271
0060, 0035, 0041, 0162
0240
0045, 0278, 0020, 0561
0020
0042
0000
0037
0037
0032
0037, 0184, 0000, 0121, 0043, 0209,
0002, 0278, 0061, 0208, 0212, 0479,
0561
Fisher
0047, 0104, 0054, 0066
Fuji
0035, 0033
Funai
0000
GE
0060, 0035, 0048, 0240, 0202
Garrard
0000
Go Video
0526
GoldStar
0037, 0038
Gradiente
0000, 0008
HI-Q
0047
Harley Davidson 0000
Harman/Kardon 0081, 0038
Harwood
0072
Headquarter
0046
Hitachi
0000, 0042, 0041, 0105
JVC
0067, 0041, 0008
Jensen
0041
KEC
0037, 0278
KLH
0072
Kenwood
0067, 0041, 0038
Kodak
0035, 0037
LXI
0037
Lloyd’s
0000, 0208
Logik
0072
MEI
0035
MGA
0240, 0043, 0061
MGN Technology0240
MTC
0240, 0000
Magnasonic
0278
13
Magnavox
Magnin
Marantz
Marta
Matsushita
Memorex
Minolta
Mitsubishi
Motorola
Multitech
NEC
Nikko
Nikon
Noblex
Olympus
Optimus
Optonica
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Portland
Profitronic
Proscan
Protec
Pulsar
Quarter
Quartz
Quasar
RCA
Radio Shack
Radix
Randex
Realistic
Ricoh
Runco
STS
Samsung
Sanky
Sansui
Sanyo
Scott
Sears
Semp
Sharp
14
0035, 0039, 0081, 0000, 0149
0240
0035, 0081
0037
0035, 0162
0035,0037, 0048, 0039, 0047, 0240,
0000, 0104, 0162, 0046, 0307
0042, 0105
0048, 0067, 0043, 0061
0035, 0048
0000, 0072
0104, 0067, 0041, 0038
0037
0034
0240
0035
0037, 0048, 0104, 0162
0062
0184, 0002, 0479
0035, 0162, 0077, 0225
0035, 0037, 0240, 0042, 0038, 0054
0042, 0105
0035, 0209, 0479
0035, 0081, 0062
0037
0067
0020
0240
0060, 0202
0072
0039
0046
0046
0035, 0162, 0077
0060, 0035, 0048, 0240, 0042, 0149,
0077, 0105, 0106, 0202
0000
0037
0037
0035, 0037, 0048, 0047, 0000, 0104,
0062, 0046, 0066
0034
0039
0042
0240, 0045
0048, 0039
0000, 0067, 0041, 0271, 0479
0047, 0240, 0104, 0046
0184, 0045, 0121, 0043, 0212
0035, 0037, 0047, 0000, 0042, 0104,
0046, 0054, 0066, 0105
0045
0048, 0062
Shintom
0072
Shogun
0240
Singer
0072
Sony
0035, 0032, 0000, 0033, 0034
Sylvania
0035, 0081, 0000, 0043
Symphonic
0000
TMK
0240, 0208
Tatung
0041
Teac
0000, 0041
Technics
0035, 0162
Teknika
0035, 0037, 0000
Thomas
0000
Toshiba
0045, 0043, 0066, 0212
Totevision
0037, 0240
Unitech
0240
Vector
0045
Vector Research 0038
Video Concepts 0045, 0061
Videosonic
0240
Wards
0060, 0035, 0048, 0047, 0081, 0240,
0000, 0042, 0072, 0149, 0062, 0212
White7Westinghouse 0278
XR-1000
0035, 0000, 0072
Yamaha
0038
Zenith
0039, 0000, 0033, 0034
15
PROGRAMMING
TV/VCR COMBO CONTROL
Locate the brand name of your TV/VCR Combo in
the Setup Codes For TV/VCR Combos section
below, and write it in the following space.
TV/VCR Combol Brand:
The brands are listed in alphabetical order with
popular codes listed first.You will use one of these
codes to program the Dolphin to operate your
TV/VCR Combo:
1. Turn on your TV/VCR Combo and insert a video
cassette.
2. On the Dolphin, press VCR once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your TV/VCR
Combo. If you perform this procedure
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3
and try entering the same code again.
4. Aim the Dolphin at your TV/VCR Combo and
press POWER once.The unit should turn off. If
it does not respond, repeat steps 2-3, trying
each code listed for your brand until you find
one that works. If it still does not work, try
searching for the code (see Searching For Your
Code on page 26).
5. If you’ve located a TV/VCR setup code that
works your TV/VCR Combo and a separate TV
code is also listed, you’ll need to program this
code into the Dolphin to access volume control
(see Programming TV Control on
page 8).
If there is no separate TV code listed, you will need
to perform the following steps to access volume
control:
Setup Codes for
TV/VCR Combos:
American High
Brocksonic
Colt
Curtis Mathis
Daewoo
Emerson
Funai
GE
Hitachi
HQ
Lloyds
MGA
Magnavox
Magnin
Memorex
Mitsubishi
Orion
Panasonic
Penney
Quasar
RCA
Sansui
Sanyo
Sears
Sharp
Sony
Symphonic
Zenith
0035 (for TV use 0051)
0002, 0294,
0072
0035 (for TV use 0051)
0278
0002, 0294, 0479
0000
0035 (for TV use 0051),
0060 (for TV use 0047),
0048 (for TV use 0093),
0240
0035 (for TV use 0051),
0000
0000
0000
0240
0081 (for TV use 0054),
0035 (for TV use 0051),
0000
0240
0037, 0162 (for TV use 0250)
0048 (for TV use 0093)
0002, 0294, 0479
0035 (for TV use 0051),
0162 (for TV use 0250)
0035 (for TV use 0051),
0240,
0162 (for TV use 0250)
0035 (for TV use 0051),
0162 (for TV use 0250)
0060 (for TV use 0047),
0035 (for TV use 0051),
0048 (for TV use 0093)
0000, 0479
0240
0000, 0037
0048 (for TV use 0093)
0032 (for TV use 0000)
0000
0000
a. Press and hold SETUP until the LED blinks
twice, then release SETUP.
b. Enter 9 - 9 - 3. The LED will blink twice.
c. Press VCR once. The LED will blink twice.
6. Write your TV/VCR Combo code in the boxes
below for future reference.
■■■■
NOTE: Remember, to use the Dolphin to operate
your TV/VCR Combo, press VCR first.
16
17
PROGRAMMING CABLE
CONVERTER (OR SATELLITE
RECEIVER) CONTROL
5. Write your Cable Converter or DBS Receiver
code in the boxes below for future reference.
Before you program the control to operate a cable
or satellite converter, you’ll need to perform the
following instructions to unlock the cable key,
enter in a new code, and lock the cable key again.
NOTE: Remember, to use the Dolphin to operate
your Cable Converter or DBS Receiver, press
CABLE first.
To unlock the Cable key:
1. On the Dolphin, press CBL once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
1. Turn on the Cable Converter or DBS Receiver.
2. On the Dolphin, press CBL once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
■■■■
To lock the Cable key:
2. Enter 9 - 9 - 7.The LED will blink twice.
3. Press CH + once.The LED will blink twice.
3. Enter 9 - 9 - 7. The LED will blink twice.
4. Press CH – once. The LED will blink twice.
To program the Cable key:
1. Locate the brand name of your Cable Converter
(or Direct Broadcast Satellite Receiver) in the
Setup Codes For Cable Converters (or Setup
Codes For DBS Receivers) section starting on
the next page, and write it in the appropriate
space.
Cable Converter Brand:
or
DBS Receiver Brand:
The brands are listed in alphabetical order with
the most popular codes listed first.You will use one
of these codes to reprogram the Dolphin to
operate your Cable Converter or DBS Receiver.
On the Dolphin, press CBL once. Press and hold
SETUP until the LED blinks twice, then release
SETUP.
Enter the first four-digit code for your Cable
Converter or DBS Receiver. If you perform this
procedure correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, then repeat steps 2 through 3
and try entering the same code again.
Aim the Dolphin at your Cable Converter or DBS
Receiver and press POWER once. The unit should
turn off. If it does not respond, repeat steps 2-3,
trying each code listed for your brand until you
find one that works. If it still does not work , try
searching for the code (see Searching For Your
Code on page 26).
18
Setup Codes for
Cable Converters:
ABC
ABC Cable
Americast
Contec
General
Instrument
GoldStar
Hamlin
Jerrold
Macom
Memorex
Movie Time
NSC
Oak
Optimus
Panasonic
Paragon
Pioneer
Pulsar
Quasar
RCA
Regal
Runco
Samsung
Scientific
Atlanta
Sprucer
Starcom
TV86
Tocom
Toshiba
Viewstar
Zenith
0003, 0008, 0017, 0013
0033
0899
0019
0476, 0276, 0810
0144
0020, 0259
0003, 0012, 0476, 0276, 0810
0033
0000
0063
0063
0019
0021
0000, 0107, 0021
0000
0144, 0533
0000
0000
0021
0020, 0259
0000
0144
0008, 0477, 0017, 0277, 0774, 0877
0021
0003
0063
0012, 0013
0000
0063
0000, 0525, 0899
19
Setup Codes for
DBS Receivers:
AlphaStar
Echostar
Expressvu
General
Instrument
HTS
Hitachi
Hughes
JVC
Jerrold
Magnavox
Memorex
Next Level
Panasonic
Philips
Primestar
RCA
Sony
Star Choice
Toshiba
Uniden
Zenith
0772
0775
0775
0627, 0361, 0869
0775
0819
0749
0775
0627, 0361
0724, 0722
0724
0869
0701
0724, 0722
0627, 0361
0566
0639
0869
0790
0724, 0722
0856
PROGRAMMING
CHANNEL CONTROL LOCK
By activating this feature, the Dolphin will only
allow access to the channel control capabilities of
your cable converter. This will guarantee that you
do not inadvertently change the channel on your
TV or VCR.
To Activate Channel Control Lock:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 6. The LED will blink twice.
3. Press CH (Up) once.The LED will blink twice.
4. Now, regardless of what mode you select (i.e.,
TV, VCR, or CBL), only the channel control
capability of your cable converter will be
accessible.
NOTE: This feature does not affect the Audio mode.
To De-Activate Channel Control Lock:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 6. The LED will blink twice.
3. Press CH (down) once. The LED will blink
twice.
4. The Dolphin will again provide TV and VCR
channel control capabilities while in the TV or
VCR mode.
20
21
PROGRAMMING
AUDIO CONTROL
Using the Dolphin’s RCVR mode, you can also
control an audio component, such as CD or DVD
player, a stereo receiver, a stereo amplifier, or a
DBS audio service.
Locate the brand name of your audio component
in the one of accompanying code lists (starting on
the next page).Write it in the appropriate space.
CD Player Brand:
or
DVD Player Brand:
or
Stereo Receiver Brand:
or
Stereo Amplifier Brand:
or
DBS Audio Brand:
The brands are listed in alphabetical order with
popular codes listed first.You will use one of these
codes to program the Dolphin to operate your
audio component:
1. Turn on the audio component (or DBS receiver
to control its audio service).
2. On the Dolphin, press AUDIO once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your audio
component. If you perform this procedure
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after
entering the code’s last digit, then repeat
steps 2 through 3 and try entering the same
code again.
4. Aim the Dolphin at your audio component and
press POWER once.The unit should turn off. If
it does not respond, repeat steps 2-3, trying
each code listed for your brand until you find
one that works. If it still does not work , try
searching for the code (see Searching For Your
Code on page 26).
5. Write your audio component code in the boxes
below for future reference.
■■■■
NOTE: Remember, to use the Dolphin to operate
your audio component, press RCVR first.
22
Setup Codes for CD Players:
Aiwa
0157, 0124
Burmester
0420
California
Audio Lab
0029
Carver
0157, 0179
DKK
0000
Denon
0003, 0873
Emerson
0305
Fisher
0179
Garrard
0420, 0393
Genexxa
0032, 0305
Harman/Kardon 0173
Hitachi
0032
JVC
0072
Kenwood
0028, 0037, 0190, 0826, 0681
Krell
0157
LXI
0305
Linn
0157
MCS
0029
MTC
0420
Magnavox
0157, 0305
Marantz
0029, 0157, 0180
Mission
0157
NSM
0157
Onkyo
0101, 0868
Optimus
0000, 0032, 0179, 0305, 0037, 0420,
0145, 0468
Panasonic
0029, 0303
Parasound
0420
Philips
0157
Pioneer
0032, 0305, 0468
Proton
0157
QED
0157
Quasar
0029
RCA
0179, 0305, 0053
Realistic
0179, 0420, 0180
Rotel
0157, 0420
SAE
0157
Sansui 0
157, 0305
Sanyo
0179
Scott
0305
Sears
0305
Sharp
0037, 0180
Sherwood
0180
Sony
0000, 0185, 0490
Soundesign
0145
Tascam
0420
Teac
0420, 0393, 0180
Technics
0029, 0303
Victor
0072
Wards
0157, 0053
Yamaha
0036, 0187
Yorx
0461
23
Setup Codes for DVD Players:
JVC
Kenwood
Magnavox
Mitsubishi
Onkyo
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sony
Technics
Toshiba
Yamaha
Zenith
0558
0534
0503
0521
0503
0490
0503, 0539
0525, 0571
0522
0522
0573
0533
0490
0503
0490
0503
Setup Codes for
Stereo Receivers:
ADC
0531
Aiwa
0158, 0189, 0121
Capetronic
0531
Carver
0189
Curtis Mathes 0080
Denon
0004
Garrard
0463
Harman/Kardon 0110, 0189
JBL
0110
JVC
0074
Kenwood
0027, 0186
Linn
0189
MCS
0039
Magnavox
0531, 0189
Marantz
0039, 0189
Onkyo
0135
Optimus
0531, 0670, 0186
Panasonic
0039, 0309
Philips
0189
Pioneer
0531, 0014, 0150, 0630, 0080
Quasar
0039
RCA
0531
Sansui
0189
Sharp
0186
Sony
0158
Soundesign
0670
Teac
0463
Technics
0039, 0309
Victor
0074
Wards
0158, 0014, 0189, 0080
Yamaha
0176, 0186
24
Setup Codes for
Stereo Amplifiers:
Carver
Curtis Mathes
Denon
JVC
Linn
Magnavox
Marantz
Panasonic
Philips
Pioneer
Sony
Technics
Victor
Wards
Yamaha
0269
0300
0160
0331
0269
0269
0269
0308
0269
0013, 0300
0689
0308
0331
0013
0354
Setup Codes for
DBS Audio Services:
Jerrold
0459, 0520
Scientific Atlanta 0460
Starcom
0459
25
SEARCHING FOR YOUR CODE
CHECKING THE CODES
If your TV, VCR, Cable Converter or Audio
Component does not respond to the Dolphin after
trying all of the codes listed for your brand, or if
your brand is not listed at all, try searching for
your code.
If you have set up the Dolphin using the
“Searching For Your Code” procedure, you may
need to find out which four-digit code is operating
your equipment:
For example, to search for a code for your TV:
For example, to find out which code is operating
your TV:
1. Turn on your TV.
1. Turn on your TV.
2. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
3. Enter 9 - 9 - 1.The LED will blink twice.
3. Enter 9 - 9 - 0.The LED will blink twice.
4. Aim the remote control at the the TV and slowly
alternate between pressing POWER and TV.
Stop when the TV turns off.
4. To view the code for the first digit, press 1
once. Wait 3 seconds and count the number of
LED blinks (e.g., 3 blinks = 3) and write down
the number in the leftmost TV Code box below.
NOTE: In the search mode, the Dolphin will
send IR codes from its library to the selected
component, starting with the most popular
code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of your other
components, repeat steps 1 through 5, but
substitute the appropriate key (i.e., VCR, CBL,
or AUDIO) for the (VCR,Cable, or Audio)
component you are searching for.
NOTE: If a code digit is “0”, the LED will not
blink.
5. Repeat step 4 three more times for remaining
digits. Use 2 for the second digit, 3 for the third
digit, and 4 for the fourth digit. Finish writing
down the code in the TV Code boxes below.
6. To check for the codes of your other
components, repeat steps 1 through 5, but
substitute the appropriate key (i.e., VCR, CBL,
or RCVR) for the (VCR,Cable, or Audio)
component you are checking.Write down the
codes in the appropriate boxes below.
TV Code
■■■■
VCR Code
■■■■
CABLE Code
■■■■
AUDIO Code
■■■■
26
27
RE-ASSIGNING DEVICE KEYS
CHANGING VOLUME LOCK
The Dolphin can be set up to control a second TV
or VCR, or any combination of four home
entertainment components. For example, to have
the Dolphin control a TV, a Cable Converter, and
two VCRs, you will need to re-assign the unused
AUDIO key to operate the second VCR as follows:
The Dolphin is set to control volume of a
component through your TV while in the TV,VCR,
or Cable mode. However, in the Audio mode, you
have separate control of of your audio
component’s volume.
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 2.The LED will blink twice.
3. Press VCR once, then press AUDIO once.
4. The AUDIO key is now ready to be
programmed for your second VCR. See
Programming VCR Control on page 12.
To re-assign other device keys, repeat steps 1
through 4 by substituting the key sequence from
the following chart for a desired component:
To Re-Assign
Perform Key Sequence
TV as 2nd VCR key:
SETUP - 9 - 9 - 2 - VCR - TV
TV as 2nd Audio key:
SETUP - 9 - 9 - 2 - AUDIO - TV
TV as 2nd Cable key:
SETUP - 9 - 9 - 2 - CBL - TV
TV back to TV
SETUP - 9 - 9 - 2 - TV - TV
VCR as 2nd TV key:
SETUP - 9 - 9 - 2 - TV - VCR
VCR as 2nd Audio key:
SETUP - 9 - 9 - 2 - AUDIO - VCR
VCR as 2nd Cable key:
SETUP - 9 - 9 - 2 - CBL - VCR
VCR back to VCR:
SETUP - 9 - 9 - 2 - VCR - VCR
AUDIO as 2nd TV key:
SETUP - 9 - 9 - 2 - TV - AUDIO
AUDIO as 2nd VCR key:
SETUP - 9 - 9 - 2 - VCR - AUDIO
AUDIO as 2nd Cable key:
SETUP - 9 - 9 - 2 - CBL - AUDIO
AUDIO back to AUDIO:
SETUP - 9 - 9 - 2 - AUDIO - AUDIO
Upon completion of a re-assignment, the LED will
blink twice to confirm your selection.At that time,
you will also need to program the Dolphin to
control the new component (see previous sections
on Programming TV Control, Programming VCR
Control, Programming Cable Control, or
Programming Audio Control).
If your TV is not remote controllable, or if you
would like the volume to be controlled by a
different component, you can change the Volume
Lock setting to control a volume through a nonassociated mode (e.g., through the cable in the TV
mode).
To change Volume Lock to the CABLE mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press CBL once.The
LED will blink twice.
3. Now,whenever you press Volume +, Volume –,
or MUTE on the Dolphin, volume will be
controlled by your Cable Converter.
To change Volume Lock to the TV mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press TV once. The
LED will blink twice.
3. Now,whenever you press Volume +, Volume –,
or MUTE on the Dolphin, volume will be
controlled by your TV.
To change Volume Lock to the VCR mode:
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press VCR once. The
LED will blink twice.
3. Now,whenever you press Volume +, Volume –,
or MUTE on the Dolphin, volume will be
controlled by your VCR.
To change Volume Lock to the RCVR mode:
NOTE: Performing these steps will allow you to
access the volume control of your audio
component in all modes.
1. On the Dolphin, press and hold SETUP until the
LED blinks twice, then release SETUP.
2. Enter 9 - 9 - 3 and then press AUDIO once. The
LED will blink twice.
3. Now,whenever you press Volume +, Volume –,
or MUTE on the Dolphin, volume will be
controlled by your audio component.
28
29
USING THE
LEARNING FEATURE
You can program the buttons to add functions that
are unique to your home entertainment devices
(e.g.,VCR Tracking Up or Down).
NOTE: Please have your original remote controls
handy before programming learning. Be sure to
press each key within 10 seconds of the previous
entry. If not, the remote control will exit the
programming mode.
Original Remote
Programming A Learning Key
1. Press and hold SET until the LED (red light)
blinks twice, then release SET.
2. Enter 9 - 7 - 5.The LED will blink twice.
3. Press a device key once (e.g., TV) to assign a
mode for learning.
4. Press an open learning key once (e.g., Jets) to
store a feature to be learned. The LED will blink
rapidly for 4 seconds. If the LED does not blink
rapidly, go back to step 1 and start again.
Point the original
remote toward the
LED bump that is
marked with a dot
in front of it.
5. Place your original remote control (e.g., TV
remote control) head-to-head (about 2" apart)
from the Dolphin Remote Control.
6. On your original remote control, press and hold
the key feature to be learned until the LED on the
Dolphin Remote Control blinks twice. If the LED
does not blink twice, repeat steps 3 through 6.
7. To learn functions onto other learning keys,
repeat steps 3 through 6.
8. To lock in new feature(s) on the Dolphin
Remote Control, press and hold SET until the LED
blinks twice, then release SET.
9. To test a learned feature, press a device key
(e.g., TV) once where the learning mode was
assigned. Then press the learning key (e.g., Jets)
where the learned feature is stored.
Deleting Functions From The Learning Keys:
1. Press and hold SET until the LED (red light)
blinks twice, then release SET.
2. Enter 9 - 7 - 6. The LED will blink twice.
3. Press the device key once where the learned
feature is stored (e.g., TV).
4. Press the learning key (e.g., Jets) to be deleted
twice. The LED will blink twice after the second
press.
5. To clear additional functions stored on other
learning keys, repeat steps 1 through 4 (in this
section).
30
31
USING THE
IR/RF COMMAND CENTER
home theater device from another room, try
performing the following installation:
The Dolphin Remote Control (URC-9811) can be
used with an optional IR/RF Command Center
which receives radio-frequency (RF) signals from
the Dolphin, anywhere in your home, up to 100
feet away*.
2. Run the IR Signal Extension Cord to the device
that is not in line-of-sight of the IR/RF
Command Center.
Once it is set up, the IR/RF Command Center will
convert the RF signals into Infrared (IR) signals to
control your home theater devices.
NOTE: The Dolphin remote control transmits both
an IR and an RF signal simultaneously. It is your
option whether you want to install the IR/RF
Command Center for extended remote control
range. If you choose to do so, during testing do
not aim the HT Pro Plus remote control at your
home entertainment devices to verify that RF
transmission is working.
NOTE: The RF signal transmitted by the Dolphin
remote control, only works with the IR/RF
Command Center.
Setting Up The IR/RF Command Center
1. Find a location approximately 8 feet in front of
your home theater devices. It should provide
(line-of sight) access to your equipment and a
power outlet to plug in the IR/RF Command
Center.
2. Plug in the IR/RF Command Center’s power
cord and raise the telescoping antenna.
3. Position the IR/RF Command Center so the
black IR Lens is aimed at your home theater
devices.
4. To test the IR/RF Command Center, take the
Dolphin into another room in your home, up
to100 feet away. Select a device key (e.g., TV)
and press it once.Then press POWER once.
The device (e.g., TV) should turn on. If it does not
turn on, review the steps 1 through 3 and make
any adjustments.Try step 4 again. If you continue to
have a problem, perhaps there is an IR line-of
sight problem. Try adding the IR Signal Extension
Cord. Also review the tips in Optimizing IR/RF
Command Center Reception.
Adding The IR Signal Extension Cord
Included with the IR/RF Command Center is an IR
Signal Extension Cord for use with a home theater
device that is not in direct line-of-sight of the IR/RF
Command Center.
1. Plug the 4-foot IR Signal Extension Cord into
the back of the IR/RF Command Center.
3. Using the supplied double-sided tape, attach
the IR Signal Extension Cord so that its LED is
over or next to the IR sensor of your home
theater device.
LED
4. Test the installation by again taking the HT Pro
Plus remote control into another room in your
home, up to 100 feet* away. Select a device key
(e.g., TV) and press it once.Then press POWER
once.
The IR/RF Command Center will convert the RF
signal from the HT Pro Plus remote control into an
IR signal and transmit that signal through the IR
Signal Extension Cord to turn on your device (e.g.,
TV).
If it does not turn on, try repositioning the LED
until the device can be controlled, then re-attach
the LED.
Optimizing IR/RF Command Center
Reception
Here are some adjustment tips for optimizing the
operation of your IR/RF Command Center:
• Aim the HT Pro Plus remote control toward the
room where the IR/RF Command Center is
located.
• Do not position the IR/RF Command Center
near metal objects, such as heat ducts.Metal
can absorb RF signals.
• Make sure the batteries in the HT Pro Plus
remote control are fully charged.Try replacing
them if you are not sure (see Installing
Batteries on page 4). Weak batteries will affect
the signal range.
• Make sure that the HT Pro Plus remote control
is not being affected by other RF transmissions
(e.g., garage door openers, cordless
telephones, etc.).
NOTE: The tests for range limits of the HT Pro Plus
remote control and the IR/RF Command Center
were conducted in open-air distance tests. Actual
signal distance will be based on the construction of
the building the unit is being used in, as well as
other factors, such as outside interference.
If you are having problems remotely controlling a
32
*Distance may vary
SPECIFICATIONS
Remote Control Power
2 AAA Batteries
IR/RF Console Power
120 Vac
Remote Control to IR/RF Console Range
up to 100 Feet (30.48 m)*
IR/RF Command Console to Device Range
25 Feet (7.62 m) ± 30°
Remote Control Dimensions (H x W x D)
9-2⁄16 x 2-10⁄16 x 1-3⁄16 in.
232 x 65 x 31 mm
IR/RF Command Console Dimensions
(H x W x D)
1-9⁄16 x 5 -1⁄16 x 4 in
39.7 x 128.6 x 101.6 mm
Remote Control Weight (without Batteries)
8 oz (220 g)
IR/RF Command Console Weight
10.4 oz (300 g)
COMPLIANCE WITH FCC
RULES AND REGULATIONS
This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment generates,
uses and radiates radio frequency energy and if not
installed and used in accordance with the
instructions,may cause harmful interference to
radio communications.However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try and correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiver antenna.
NOTE: Specifications are typical. Individual units
might vary.
• Increase the separation between the equipment
and the receiver.
Specifications are subject to change and
improvement without notice.
• Connect the equipment into an outlet that is
different from that to which the receiver is
connected.
• Consult the dealer or an experienced
radio/television technician for help.
The user is cautioned that changes and
modifications made to the equipment without the
approval of the manufacturer could void the user’s
authority to operate his equipment.
FCC Authorization Label
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
1. This device may not cause harmful interference
and
2. This device must accept any interference
received, including interference that may cause
undesired operation.
FCC ID #: MG3URC033
IR/RF LCD 8-Device With Learning: Dolphin
*Distance may vary
34
35
TROUBLESHOOTING
PROBLEM: LED does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA
alkaline batteries (see page 7).
PROBLEM: LED blinks when you press a key, but home
entertainment component does not
respond.
SOLUTION: Make sure you are aiming the Dolphin at
your home entertainment component and
that you are within 15 feet of the
component you are trying to control.
PROBLEM: The Dolphin does not control home
entertainment components or commands
are not performing properly.
SOLUTION: Try all listed codes for the component
brand being set up. Make sure all
components can be operated with an
infrared remote control.
PROBLEM: TV/VCR combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some
combo units may require both a TV code
and a VCR code for full operation (see
page 16).
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions in Changing Volume
Lock (see page 30).
PROBLEM: CH+ , CH– , and LAST do not work for
your RCA TV.
SOLUTION: Due to RCA design (1983-1987), only the
original remote control will operate these
functions.
PROBLEM: Changing channels does not work properly.
SOLUTION: If original remote control required
pressing ENTER to change channels, press
ENTER on the Dolphin after entering a
channel number.
PROBLEM: Tried “Search Method” and still could not
find a working code.
SOLUTION: Try the “Search Method” again after
clearing out the device key as follows:
Press and hold ENTER until red light blinks
twice, then release.Next enter 9 - 9 2.Then press and release the device key to
be cleared twice.
PROBLEM: Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require
programming TV codes on the Dolphin.
For Sony, use TV code 0000 and VCR code
0032. For Sharp, use TV code 0093 and
VCR code 0048.
36

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:12:20 22:04:40Z
Modify Date                     : 2003:01:03 11:32:44-08:00
Page Count                      : 19
Creation Date                   : 2002:12:20 22:04:40Z
Mod Date                        : 2002:12:20 14:07:56-08:00
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Author                          : 
Metadata Date                   : 2002:12:20 14:07:56-08:00
Creator                         : 
Title                           : Dolphin Manual
Page Mode                       : UseThumbs
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MG3URC033

Navigation menu