Universal Global Scientific BMGPBR65 Bluetooth Module User Manual BM GP BR65 User manual

Download:
Mirror Download [FCC.gov]
Document ID	2001828
Application ID	VIOq9R9p1X8XYyCzUcnbUg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	67.16kB (839486 bits)
Date Submitted	2013-06-27 00:00:00
Date Available	2013-08-11 00:00:00
Creation Date	2017-10-26 21:37:45
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-26 21:37:45
Document Title	BM-GP-BR65-User-manual
Document Creator	PDFCreator Version 1.2.3
Document Author:	Keroro

Bluetooth Module BM-GP-BR-65 User
Manual (for Linux)
ASE Group
© USI proprietary and confidential
Bring up Bluetooth
1. Power up BR-65 by Plug in USB connector
2. Check Serial Port device created in Linux System
© USI proprietary and confidential
Bring up Bluetooth
3. Use prepared script to download firmware
4. OS requests to get ROOT permission by typing password.
5. Downloading process would be ended by “Done setting line displine”.
© USI proprietary and confidential
Bring up Bluetooth
6. Use ‘hciconfig –a’ command to check Bluetooth device status.
It should show “UP RUNNING”.
© USI proprietary and confidential
Using Object Push Profile (OPP)
1. Click system Bluetooth icon on the status bar, a “Bluetooth Device” dialog pop up.
2. Set smart phone with Bluetooth function into discoverable mode, and click “Search”
Button on the dialog. Wait for a while, a new item will be showed on the list.
© USI proprietary and confidential
Using Object Push Profile (OPP)
3. Click the device item, and pair with it. It may request the check the PIN number,
click “Yes” to process.
4. Right click the Bluetooth icon, and click “Send files to device”
© USI proprietary and confidential
Using Object Push Profile (OPP)
5. Select on the file on the system, in this case a mp3 file is selected.
6. Select the paired device.
© USI proprietary and confidential
Using Object Push Profile (OPP)
7. A progress pop up. You may need to confirm the request on the smart phone.
8. After confirming the request, the transmission will be started.
© USI proprietary and confidential
Appendix A Specification
© USI proprietary and confidential
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in
the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory
information/warning as show in this manual.
End Product Labeling (FCC)
When the module is installed in the host device, the FCC ID label must be visible through a window on the final device or it must be
visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device
that contains the following text: “Contains FCC ID: COFBMGPBR65”.
The grantee's FCC ID can be used only when all FCC compliance requirements are met.
Required FCC Compliance Statement for Host Integration
To integrate this module into the host, the host manufacturer is responsible for the applicable FCC rules, including the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
In the user manual of the host device, the following statements are required to be included.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to
operate the equipment.
FCC Module Integration Restriction:
This module has been certified by FCC as single module approval with the following restrictions:
1. The chip antenna with 2.5 dBi gain was verified in the conformity testing. Radiated transmit power must be equal to or lower
than that specified in the FCC Grant of Equipment Authorization for FCC ID: COFBMGPBR65. A separate approval is required for
all other operating configurations.
2. This module can be installed in portable, mobile, or fixed application. To assure RF Exposure compliance, the antenna must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product
procedure.
3. If any other simultaneous transmission radio is installed in the host platform together with this module, or above restrictions
cannot be kept, a separate RF exposure assessment and FCC equipment authorization is required.
-1-
End Product Labeling (IC)
When the module is installed in the host device, the IC label must be visible through a window on the final device or it must be
visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device
that contains the following text: “Contains IC: 10293A-BMGPBR65”.
The grantee's IC ID can be used only when all IC compliance requirements are met.
Required IC Compliance Statement for Host Integration
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement."
CAN ICES-3(B)/ NMB-3(B)
IC Module Integration Restriction:
1.
2.
3.
The chip antenna with 2.5 dBi gain was verified in the conformity testing. In case any modification in the radio equipment which
do change the electrical characteristics beyond the rated limits established by the manufacturer and accepted by Industry
Canada for IC ID 10293A-BMGPBR65, a separate approval is required.
This module can be installed in portable, mobile, or fixed application. To assure RF Exposure compliance, the antenna must not
transmit simultaneously with any other antenna or transmitter, except in accordance with IC multi transmitter product
procedure.
If any other simultaneous transmission radio is installed in the host platform together with this module, or above restrictions
cannot be kept, the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In
these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate Industry Canada authorization.
FCC ID: COFBMGPBR65
IC: 10293A-BMGPBR65
-2-
R&TTE Regulation:
In all cases assessment of the final product must be met against the Essential requirements of the
R&TTE Directive Articles 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article
3.3 requirements.
1. The chip antenna (gain: 2.5 dBi) was verified in the conformity testing, and for compliance the
antenna shall not be modified. A separate approval is required for all other operating
configurations, including different antenna configurations.
2. If any other simultaneous transmission radio is installed in the host platform together with this
module, or above restrictions cannot be kept, a separate RF exposure assessment and CE
equipment certification is required.
******************************************************************************
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011
EN 62311:2008
EN 62479 :2010
EN300 328 V 1.8.1:2012
EN 301 489-1 V1.9.2:2011
EN 301 489-17 V 2.2.1 :2012
National Authorities were informed according to Article 6.4 of Frequency Notification.
Special Requirements are considered. The product is labeled with CE Marking.
-3-
Česky
[Czech]
Dansk
[Danish]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr
[udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme
tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, [name of manufacturer], declares that this [type of equipment] is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente [nombre del fabricante] declara que el [clase de
equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ∆ΗΛΩΝΕΙ ΟΤΙ [type of equipment]
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est
conforme aux exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE.
-4-
Italiano
[Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di
apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of
equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in
Nederlands
overeenstemming is met de essentiële eisen en de andere relevante
[Dutch]
bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott]
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Magyar
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó
[Hungarian]
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português [Nome do fabricante] declara que este [tipo de equipamento] está conforme
[Portuguese
com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami
in ostalimi relevantnimi določili direktive 1999/5/ES.
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky
a všetky príslušné ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen
-5-
[Finnish]
tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
-6-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Keroro
Create Date                     : 2013:06:20 14:15:12+08:00
Modify Date                     : 2013:06:24 18:40:12+08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PDFCreator Version 1.2.3
Metadata Date                   : 2013:06:24 18:40:12+08:00
Format                          : application/pdf
Description                     : 
Creator                         : Keroro
Title                           : BM-GP-BR65-User-manual
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:039d4c61-f03f-41cf-9363-e025d6d98440
Instance ID                     : uuid:e6f8b179-9c62-41d3-95dc-18520a250d0e
Page Count                      : 15

EXIF Metadata provided by EXIF.tools