Universal Global Scientific WMBNBM22 Wireless IoT module User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3801042
Application ID	j9SIDtBys6PJR15GMCiD6A==
Document Description	User Manual
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.05kB (713099 bits)
Date Submitted	2018-03-29 00:00:00
Date Available	2018-04-28 00:00:00
Creation Date	2018-05-24 20:44:48
Producing Software	GPL Ghostscript 9.21
Document Lastmod	2018-05-24 20:44:48
Document Title	投影片 1
Document Creator	Microsoft® PowerPoint® 2013
Document Author:	ASE Group

WM-BN-BM-22
OEM/Integrators Installation
Manual
PMN : Wireless IoT module
Mar 2, 2018
Connect To Device

Open Terminal

Baud Rate: 115200 , 8N1
© USI. All rights reserved.
Start AP

Start a soft AP





SSID: USI_test
Security: WPA2_AES
Key: 12345678
Channel: 6
Command:

start_ap USI_test wpa2_aes 12345678 6
© USI. All rights reserved.
Start AP
© USI. All rights reserved.
Connect to AP

Select the SSID in AP list of Ubuntu.


USI_test
Key in the key:

12345678
© USI. All rights reserved.
Ping to test connection
© USI. All rights reserved.








Important Notice to OEM integrators
1. This module is limited to OEM installation ONLY.
2. This module is limited to installation in mobile or fixed applications, according to
Part 2.1091(b).
3. The separate approval is required for all other operating configurations, including
portable configurations with respect to Part 2.1093 and different antenna
configurations.
End Product Labeling
When the module is installed in the host device, the FCC/IC ID label must be visible
through a window on the final device or it must be visible when an access panel, door
or cover is easily re-moved. If not, a second label must be placed on the outside of the
fi al de ice that co tai s the follo i g te t: Co tai s FCC ID: COFWMBNBM
Co tai s IC:
9 A-WMBNBM
The FCC ID/IC ID can be used only when all FCC/IC compliance requirements are met.
© USI. All rights reserved.





Antenna Installation
(1) The antenna must be installed such that 20 cm is maintained between the antenna
and users,
(2) The transmitter module may not be co-located with any other transmitter or
antenna.
(3) The PIFA antenna with 0.56 dBi gain was verified in the conformity testing.
Radiated transmit power must be equal to or lower than that specified in the FCC/IC
Grant of Equipment Authorization for FCC ID: COFWMBNBM22 and IC: 10293AWMBNBM22. A separate approval is required for all other antenna type, or higher
gain antenna.
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC/IC authorization
is no longer considered valid and the FCC ID/IC ID cannot be used on the final product.
In these circumstances, the OEM integrator will be responsible for re-evaluating the
end product (including the transmitter) and obtaining a separate FCC/IC authorization.
© USI. All rights reserved.





Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user
regardi g ho to i stall or re o e this RF odule i the user’s a ual of the e d
product which integrates this module. The end user manual shall include all required
regulatory information/warning as show in this manual.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
© USI. All rights reserved.






If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
© USI. All rights reserved.











Industry Canada Statement
This de ice co plies ith I dustr Ca ada’s lice ce-exempt RSSs. Operation is subject
to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement."
CAN ICES-3(B)/ NMB-3(B)
Radiation Exposure Statement
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body.
10
© USI. All rights reserved.


For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for
additional testing to verify compliance as a composite system. When
testing the host device for compliance with Part 15 Subpart B, the host
manufacturer is required to show compliance with Part 15 Subpart B
while the transmitter module(s) are installed and operating. The
modules should be transmitting and the evaluation should confirm that
the module's intentional emissions are compliant (i.e. fundamental and
out of band emissions). The host manufacturer must verify that there
are no additional unintentional emissions other than what is permitted
in Part 15 Subpart B or emissions are complaint with the transmitter(s)
rule(s).
If the host manufacturer needs help in ensuring compliance with Part 15
Subpart B requirements, the grantee will provide assistance.
11
© USI. All rights reserved.
Thank You
www.usish.com
Realizing IDEAS Together
© USI. All rights reserved.

---

Source Exif Data:

EXIF Metadata provided by EXIF.tools