Universal Remote Control Univeral Urc Rf20 Owners Manual OCE 0046B

2015-01-12

: Universal-Remote-Control Univeral-Remote-Urc-Rf20-Owners-Manual univeral-remote-urc-rf20-owners-manual universal-remote-control pdf

Open the PDF directly: View PDF .
Page Count: 35

Download
Open PDF In Browser	View PDF

Congratulations!
Congratulations on purchasing Universal Remote
Control’s MASTERCONTROL™
RF20 Pre-programmed and
Learning Remote Control!
You now have the power to
control your entire home
entertainment system with
one easy-to-use remote.
The RF20 can be used with
thousands of audio/video
Components because of the
extensive code library
pre-programmed into the
remote. And, the RF20’s
impressive lineup of special
advanced features can
automate and customize the
operation of your system
in many ways. So... get
ready to sit back, relax
and simplify your home
entertainment experience.

The Quick Setup DVD
Program Guide supplied
with the RF20 will assist you
in programming your remote
by guiding you through an
easy step-by-step process.
This Owner’s Manual is
designed as a companion
reference source to the
DVD Guide, should you
need to refer back to a
particular section, or review
certain instruction detail not
covered in the DVD.
However, if you are unable
to watch the DVD Guide for
some reason, everything
you need to know about
programming the RF20 is
contained in this Manual.

MASTERCONTROL™ RF20 Owner’s Manual
© 2006 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual
may be copied or reproduced in any form without prior written consent from
Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL
NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS /
OMISSIONS MADE IN THIS MANUAL. The information in this manual may be
subject to change without prior notice. MASTERCONTROL, PowerBlaster,
MacroPower, and SimpleSound are trademarks of Universal Remote Control,
Inc. All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.

Keypad Layout

GETTING
STARTED

Overview
Battery Installation
Activating Component Commands
Light Button

4
4
5
6

BASIC SETUP

Overview
Pre-Programmed Code Method
Learning Method
Transmitting (Busy Signal) Icon.
Child Lock Feature

7
7
15
19
19

CUSTOMIZING
YOUR RF20
WITH SPECIAL
ADVANCED
FEATURES

Customizing the LCD Screen

Favorite Channel Setup

MacroPower™ Setup

SimpleSound™ Setup &
Other 'Punch Throughs'

Setting Backlight Options

Hiding & Adding Pages

Recalling Pre-programmed
Setup Code Numbers

Cloning other RF20s

Overview

Erasing Learned Button,
Macro or Favorite
Channel Commands

Re-setting RF20 to Original
Factory Default Settings

THE OPTIONAL
POWERBLASTERTM

PowerBlasterTM

PREPROGRAMMED
CODE NOTES

Pre Programmed Code Notes

Pre-Programmed Code Tables
SAT
TV
45
CD
CABLE
48
DVR
DVD
50
AUX
VCR
53
NOTES
AUDIO
55

44
58
59
61
62
64

FAQ
Warranty
Specifications

65
66
66

ERASING
COMMANDS

PREPROGRAMMED
CODE TABLES
OTHER
INFO

CONTNETS

WELCOME

500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532

LOCATION OF
CONTROLS

The RF20 Remote

SCREEN-LABELED
DISPLAY BUTTONS

Getting Started-Overview
This is what MASTERCONTROL™ RF20 is all about!

TITLE
FAVORITE
CHANNEL
PAGE
BUTTONS

changes the page of
buttons displayed

PAGE
NUMBERS

The RF20 is designed to operate up to 10 different
Audio/Video Components and is pre-programmed to
operate virtually all brands of TV, VCR, DVD and CD Players,
Cable Set Top Boxes, Satellite Receivers, TiVo and other
DVRs, Audio Components, Tape Decks, Multimedia PCs,
XM Radio, Ipod, X-Box, Lighting Controls and other custom
installation products. It also offers an impressive lineup of
special features designed to provide you with many
time-saving conveniences and enhance your overall
entertainment experience. However, we strongly
recommend that you fully complete all of the Basic Setup
steps before proceeding to customize your RF20 with any of
the special advanced features.

Overview & Battery Installation

Keypad Layout

LIGHT
BUTTON

MAIN
BUTTON

takes you to the main menu

Battery Installation
The very first step is to
insert the four AAA
batteries that are included
in the package into the
battery compartment
located in the back of the
remote. Just press the tab
and lift off the cover.
Please be sure to insert the
batteries correctly as you
see in the diagram.
Remember, there is a
positive and negative end to
each battery and you can

tell by the + (positive) and
- (negative) symbols. Once
the batteries are correctly
installed, replace the cover.
Now you’re ready to start!

GETTING STARTED

CONTROL LOCATIONS

FUNCTION
BUTTONS

Activating Component Commands –
Simple, Easy, Intuitive
Once you’ve programmed
RF20 for your Components,
all you have to do to operate
a specific Component is
first, press the MAIN button. This will display Page 1
of the MAIN menu on the
LCD screen. Page 1 of the
MAIN menu displays five
Components. Then, simply
select the Component you
want to operate by pressing
the corresponding ScreenLabeled Component Display
Button on the right side of
the LCD Screen. As an
example, if you press the TV
Display Button, the display
label at the top of the
screen will change from
MAIN to TV, and all the buttons on RF20 will work your
TV. To operate another
Component, simply press
the MAIN button again to
return to Page 1 of the

MAIN menu and select the
next Component you want
to operate.
If you don’t see the
Component you want to
control on Page 1 of the
MAIN menu, just use the
PAGE ( ) ( ) buttons on the
left side of the screen to
bring up Page 2 of the
MAIN menu which displays
an additional five
Components.

Light Button
The fully backlit keypad makes the RF20 easy to use in the
dark or dim lighting conditions. Simply press the LIGHT
button to backlight all the keypad buttons and LCD screen.
To turn off the backlight, press the LIGHT button again, or
just wait ten seconds (the backlight automatically shuts
itself off). Lights out!
Try it out!

Each Component is
provided with five pages of
pre-labeled command
display buttons (or space
for additional command
display buttons). Once
again, simply use the PAGE
( ) ( ) buttons to take you to
the next command page, or
return you to the previous
command page.
LIGHT
BUTTON

TV DEVICE
BUTTON
MAIN
BUTTON

GETTING STARTED

6
LIGHT BUTTON

Activating Component Commands

8
Basic Setup - Overview

Pre-Programmed Code Method

Overview &
Pre-Programmed Code Method

7
There are two ways to program the RF20:
• The Pre-Programmed Code Method
• The Learning Method
The Pre-Programmed Code Method allows you to set up
all the buttons at once, so it’s the fastest and easiest of
the two methods. The Learning Method allows you to
transfer functions from other remotes (old or new), one
button at a time.

STEP 1:

STEP 2:

STEP 3:

The pre-programmed 3-digit
codes are found in the back of
this Manual on page 44. The
codes are listed by Component
category (i.e., TV, VCR, DVD,
etc.), then by brand name. For
instance, if you want to locate
a code for a Sony TV, first
locate the TV category, and
then look for the Sony brand.

Now, turn on the Component
you want to program... let’s say
your TV to start. Look up your
TV’s manufacturer setup code
from your reference list.

Press and hold the MAIN and ENT
(Enter) buttons at the same time
for approximately 3 seconds, until
the word “SETUP” is displayed at
the top of the LCD screen. This
signals that you are now in setup
mode.

Once you have located the
3-digit code (or in some cases,
several code numbers) for the
Component that you want to
operate with your RF20, write
them ALL down on a piece of
note paper. It’s important that
you write down all the codes
because only one code is going
to work for you.

IMPORTANT:
You now have 30 seconds to perform
the next step while you are in SETUP
mode. If you don’t press a button
within 30 seconds, SETUP will disappear from the screen, signaling that
you have exited setup mode and you
will need to start over.

MAIN
BUTTON
ENTER
BUTTON

BASIC SETUP

Pre-Programmed Code Method

STEP 4:
Press the P-PRO display button
to select the Pre-Programmed
Method.

The screen will then display the
five Components from Page 1 of
the MAIN menu.
To display Page 2 of the MAIN
menu that lists an additional five
Components, simply press the
PAGE ( ) ( ) buttons.

FIRST FIVE
DEVICE NAMES

PAGE
BUTTONS

STEP 6:

Press the Component display
button you want to program.
For example: If you want to
setup the TV Component
button, press the TV
Component display button. The
display at the bottom of the LCD
screen will flash
“FROM - TABLE”.

In this step you verify the type
of component you plan to
operate with this component
button. For example: If you plan
to operate the TV component
with the TV button, simply press
the TV display button once
again. However, if for example
you are setting up AUX to
operate a second DVD Player,
you would first need to press
AUX in Step 5, and then DVD
in Step 6.

BASIC SETUP

P-PRO
BUTTON

STEP 5:

NOTE:
If the Component fails to turn off after you have
entered all the code numbers listed for your brand,
you can scan through all the other code numbers
that are pre-loaded into the RF20 for that Component
(in this case TV) by using the UP or DOWN display
buttons on the screen. (There is a chance that your
Component was actually manufactured by another
brand.) However, most of the code tables are so
large that it is usually faster to use the Learning
Method on Page 15.

STEP 7:

STEP 8:

Point the RF20 toward the
Component you want to
program, (in this example, TV),
and punch in the 3-digit code
that you wrote down for that
specific Component. Use the
Number buttons 0-9 on the
remote to punch in the code.
If the 3-digit code number that
you just punched in is correct,
the Component will turn off.
If the Component does not turn
off, continue entering code
numbers from your list until the
Component turns off. Some
brands have several possible
code numbers.

When the Component turns off,
press the ON button to turn the
Component back on. Now you
can test the Volume and
Channel buttons (for TV), or
PLAY and STOP (for VCR and
DVD) to make sure they all
work. If any of the buttons do
not work properly, you need to
find a new correct code. For

example, maybe your Sony TV
turned off with code number 147,
but the volume controls did not
work properly. If this is the case,
try the next code number listed
for that Component until you find
a perfect match.

ON
BUTTON
UP & DOWN
BUTTONS

VOLUME
BUTTONS
CHANNEL
BUTTONS
PLAY
BUTTON

NUMBER
BUTTONS

STOP
BUTTON

BASIC SETUP

12
Pre-Programmed Code Methoda

Pre-Programmed Code Method

STEP 10:

Once you have found the right
code, save the code number by
pressing the SAVE display
button that appears on the LCD
screen. The LCD screen will
blink “SAVED” two times,
signaling that the code number
has been successfully saved.

Exit SETUP mode by pressing
the MAIN button two times.
When the LCD screen displays
MAIN, you are back in normal
operating mode.

SAVE
BUTTON

NOW, PROGRAM THE REST OF YOUR
COMPONENTS BY REPEATING STEPS 1
THROUGH 9. IN MOST SYSTEMS,YOU
CAN FINISH BASIC SETUP IN JUST A
FEW MINUTES AND PUT ALL YOUR OLD
REMOTES AWAY.
IF YOU ARE STILL MISSING
COMMANDS TO CONTROL ANY OF
YOUR COMPONENTS, USE THE
LEARNING METHOD
ON PAGE 15.

MAIN
BUTTON

BASIC SETUP

Pre-Programmed Code Method

Pre-Programmed Code Methoda

STEP 9:

16
Learning Method
The RF20 can actually ‘learn’ commands from other remote
controls (old or new), one-button-at-a-time, so it will never
become obsolete. RF20 is the last remote you’ll ever need!
Just follow these simple steps:

STEP 1:

STEP 3:

STEP 4:

Line-up the RF20 with the other
remote control, head-to-head,
one or two inches apart.

Press the LEARN display button
on the LCD screen. The top of
the screen will change to
“LEARN” and display the five
Components from Page 1 of the
MAIN menu.

Select the Component you
want to teach commands to
by pressing that Component
display button on the LCD
screen (in this example, TV).
The top of the TV screen will
change to “TV”.

STEP 2:
On the RF20, press and hold
the MAIN and ENT (Enter)
buttons at the same time for
approximately three seconds,
until the word “SETUP” is
displayed at the top of the LCD
screen. This signals you are
now in SETUP mode.
IMPORTANT
You now have 30 seconds to perform
the next step while you are in SETUP
mode. If you don’t press a button
within 30 seconds, SETUP will disappear from the screen, signaling that
you have exited setup mode and you
will need to start over.

MAIN
BUTTON
ENTER
BUTTON

To display Page 2 of the MAIN
menu that lists an additional
five Components, simply press
the PAGE ( ) ( ) buttons.

NOTE: If you want to teach any command
to a Component button, press the
desired Component display button once
the top of the screen displays “MAIN”, by
pressing the PAGE button.The top of the
screen wil change to “READY”. Then go to
STEP 6.

LEARN
BUTTON

BASIC SETUP

Learning Method

STEP 5:
Press any button on the RF20
that you want to teach a
command to. The top of the
screen will change to “READY”
and the bottom of the screen will
display the button name you
pressed.

NOTE: If you don't see the display
button you would like to teach on
the LCD screen, use the PAGE
( ) ( ) buttons. The only
buttons you can't teach are the
PAGE and MAIN buttons.

Press and hold the button on the
other remote control that you
want to ‘teach’ to the RF20 until
the LCD display on the RF20
changes to either “GOOD” or
“FAILD”. If the “GOOD” label
appears on top of the display,
you were successful. If the
“FAILD” label appears on top
of the display, try ‘teaching’ the
same button to the RF20 once
again by repeating STEPS 5
and 6.

Now, continue to teach the RF20
any other commands from your
other remotes by repeating
STEPS 4 through 6 (to go
back to STEP 4, simply press
MAIN once).

STEP 8:
Once you have completed
teaching all the button
commands to the RF20, return to
normal operation by pressing the
MAIN button twice.

• Move to another room. Plasma
TVs, sunlight, halogen or quartz
lighting can interfere with the
learning process.
• Even though the old remote
seems to be working fine, put in
fresh alkaline batteries.
• Gradually vary the distance
between the remote controls.
Try 1”, 2” and so on,
up to 4 feet.
• Try tapping the button on your
old remote instead of pressing
and holding it during the
learning process.

Some additional Information
regarding the Learning Process:
• Learned functions override
any existing pre-programmed
functions on the remote control.
• All buttons can be learned
except for the PAGE, MAIN
and LIGHT buttons.
• Learned functions are
automatically erased when
a new function is learned on
the same button.
• Learned functions are retained
even after a different Setup
Code Number is programmed
into the remote.
• To return to an original
pre-programmed function, a
learned function must be erased.

BASIC SETUP

STEP 6:

STEP 7:

NOTE: Test all your new commands.
If any of them don’t work, try the
Learning Method again, following
these suggestions:

20
Transmitting (Busy Signal) Icon
When a command is being transmitted, an icon will appear
in the upper right corner of the LCD screen. This indicates
that a signal is being sent. This is particularly useful when
setting up Macros and FAVs, since it flashes with every step
of a sequence of commands.

After you’ve finished all your basic setup, you can choose
to make operation easier by customizing the RF20 just the
way you want, using the Special Advanced Setup Features
described in this section.

Customizing the LCD Screen
You can easily edit or change the name of any of the
display buttons (including Favorite Channels) on the LCD
screen by following these steps:

CHILD LOCK FEATURE
This ‘child-lock’ feature prevents the unauthorized use of
the remote control by children. It blocks all operations of
the remote control.
To Activate:
Press the +10 and ENT (Enter) buttons simultaneously for
3 seconds. The bottom of the LCD will blink “LOCKED” three
times and then display “LOCKED”.
To Return to Normal Operation:
Press the +10 and ENT (Enter) buttons simultaneously again
for 3 seconds. The LCD will display the last use mode.

STEP 1:

STEP 3:

Press and hold the MAIN and
ENT (Enter) buttons at the same
time for approximately 3
seconds, until the word “SETUP”
is displayed at the top of the LCD
screen. This signals that you are
now in setup mode.

Press the TEXT display button.
The screen will display the list of
Components and “EDIT” will
appear at the top of the screen.

IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.

STEP 2:
Press the EDIT display button.
The LCD display will change to
the EDIT menu.

STEP 4:
Navigate to the Component and
page where there is a button
label you want to EDIT, selecting
between the FAV, MAIN, COMPONENT display buttons; then
using the PAGE button.
NOTE: If you wish to change the name of
a Component button, press the Page ( )
Up button twice.The top of the display
will change to MAIN, and you can navigate to MAIN page 1 or page 2 before
going on to Step 5.

CUSTOMIZING

BASIC SETUP

Customizing Your RF20 with Special
Advanced Features

Customizing the LCD Screen

Transmitting (Busy Signal) Icon

Customizing the LCD Screen

STEP 5:

STEP 6:

STEP 7:

Press the button you wish to
edit. The first character space
of your button label will start
to blink.

Change the character by
using any of the number keys.
Each press of the same number
button selects the next
character of that number’s
group, as shown in the
diagram below.

Once the character you want
appears, move to the next space
by pressing the Right
cursor button.

UP CURSOR
Button deletes all text

LEFT CURSOR

STEP 8:
When you are finished editing
the button, press the button you
edited and “SAVED” will flash at
the bottom of the display.

Moves blinking
character left

DOWN CURSOR
RIGHT CURSOR
Moves blinking
character right

BLINKING
CHARACTER

To change any other button
labels on the same Component,
press the next button, then
repeat steps 6-8. If you wish to
edit a button on another
Component, press the MAIN button once, then repeat Steps 4-8.

STEP 9:
Once you’ve finished editing
buttons, press the MAIN button
four times to return to normal
operation.

CUSTOMIZING

deletes the currently
blinking character

24
Favorite Channel Setup
This is one of RF20’s most desirable features. Once it’s set
up, you can select up to 40 favorite channels with the press
of a button - without the need to remember or type in a
channel number. Let the channel surfing begin!
To access Favorite Channel listings, simply press the FAV
button to display Page 1 of Favorite Channel listings. There
are eight pages of Favorite Channels, with five Channels on
each page, for a total of 40 Channels. Just use the PAGE ( )
( ) buttons to locate the Channel you want to setup. Each
Channel can be setup to be instantly selected with the press
of one button.
To setup a Favorite Channel button, follow these steps:
STEP 1:

STEP 2:

Press and hold the MAIN and
ENT (Enter) buttons at the same
time for approximately 3 seconds,
until the word “SETUP” is
displayed at the top of the LCD
screen. This signals that you are
now in setup mode.

Press the FAV display button.

FAV
BUTTON

The top of the display will show
“FAV”. The bottom of the display
will flash “SELECT”

STEP 3:

STEP 5:

Use the PAGE ( ) ( ) buttons
until you locate the name
(i.e.,ABC, CBS, NBC) of the
favorite channel you want to
setup.

Press either the TV, SAT or
CABLE Component button (select
the Component you use to enter
channel numbers).

STEP 6:
STEP 4:
Press the favorite channel
display button you want to setup.
The top of the screen will
change to show the channel
name. The bottom of the screen
displays “STEP0”, indicating that
you have not entered the
channel number yet.

Press each of the number buttons
for the channel.
Note: If a number is repeated when setting the channel (for example, channel
“33” or “522”), it is usually best to set a
half second delay in between the identical numbers by pressing the (II) PAUSE
button. Each press of the PAUSE button
increases the delay by a half second.

PAUSE
BUTTON

NOTE: Some brands of television
require an ENT (Enter) command after
the channel numbers.

CUSTOMIZING

Favorite Channel Setup

MacroPower™ is a unique feature that enables you to turn
all of your Components ON or OFF, at the same time, simply
with the press of one button.
We call that a “Macro”. What would normally take multiple
remotes and button pushes, the RF20 can accomplish with
the press of one button. In addition to the Power ON or OFF
buttons, any of the Display buttons (on any Component or
Page) can be set to be Macro buttons as well. Feel the
power!
To setup a Power ON macro button that will turn ON several
components at the same time (for example, TV, VCR and
CABLE), follow these easy steps:
STEP 7:

STEP 9:

STEP 1:

STEP 4:

Press the LIGHT button after you
enter the channel number.
A new screen appears displaying
SAVE, UNDO or EXIT.

When you are finished setting
up Favorite Channel buttons,
press the MAIN button twice to
return to normal operation.

Press and hold the MAIN and
ENT (Enter) buttons at the same
time for approximately 3 seconds,
until the word “SETUP” is
displayed at the top of the LCD
touch screen. This signals that
you are now in setup mode.

Press the first component display button you want the Macro
to turn on (in this example, TV)
and “TV” will display at the top
of the screen and “STEP 1” at
the bottom.

STEP 8:
To save the channel you
entered, press the SAVE display
button. The UNDO display button
lets you erase the last entry. The
EXIT display button erases all
entries for this button.

IMPORTANT: You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.

SAVE
BUTTON

Press the MACRO display button
on the LCD screen. The top of
the screen will display
“MACRO”. The bottom of the
display will flash “SELECT”.

STEP 3:
Press the ON button. “ON” will
display at the top of the LCD
screen. “STEP0” will display at
the bottom of the screen indicating
that no macro steps have
been entered yet.

STEP 5:
Then, press the ON button to
confirm the command and “STEP
2” will display at the bottom of
the screen. (NOTE: Whenever a
button is pressed, another
Macro step is counted and displayed at the bottom of the
screen.)

STEP 6:
Now, press the MAIN button to
return to the Main Component
listing. (“STEP 3” will display at
the bottom of the screen.)

CUSTOMIZING

STEP 2:

MacroPower™ Setup

STEP 7:

STEP 11:

STEP 12:

STEP 13:

Press the second component
display button that you want the
Macro to turn on (in this example,
VCR) and “VCR” will display
at the top of the screen. (“STEP
4” will display at the bottom of
the screen.)

Then, press the ON button to
confirm the command. (“STEP
8” will display at the bottom of
the screen.)

Press the LIGHT button to end
your macro. A new screen will
appear:

If you are satisfied with your
macro, press the SAVE display
button. The UNDO display button
lets you erase the last step.
The EXIT display button erases
all the macro steps.

NOTE : Don’t worry about the number of
steps. Each macro button can store up to
190 steps, so you are not likely to run out
of steps!

STEP 8:
You can also program delays in
between commands by pressing
the (II) PAUSE button. Each
press adds half a second to the
delay.

Press the MAIN button twice to
return to normal operation.

STEP 9:
Now, press the MAIN button to
return to the Main Component
listing. (“STEP 6” will display at
the bottom of the screen.)

STEP 10:
Press the third component display button that you want the
Macro to turn on (in this example, CABLE) and “CABLE” will
display at the top of the screen.
(“STEP 7” will display at the bottom of the screen.)

SAVE
BUTTON
UNDO
BUTTON
EXIT
BUTTON

CUSTOMIZING

Then, press the ON button to
confirm the command. (“STEP
5” will display at the bottom of
the screen.)

STEP 14:

30
Advanced Macro Options:
SETTING UP A POWER OFF MACRO:
Simply follow the same steps as outlined above, except
press the OFF button in place of the ON button.

PROGRAMMING A “PRESS & HOLD” MACRO:
Another option for Component button macros is to only
send the macro if the button is pressed and held. This is
setup by entering a delay as the first step of the macro.
The amount of delay determines how long the user must
press the button before the macro is sent. The advantage
of this option is that a normal press of the COMPONENT
button will simply switch Components without sending the
macro command.

SimpleSound™ is a dynamic feature that gives you total
volume control over all the Components in your system,
even those without their own built-in volume control, such
as TiVo, DVD and VCR... saving you the hassle and
inconvenience of constantly needing to switch between
Component modes on the remote. With SimpleSound™,
you can set the RF20’s volume control buttons to always
control the sound in your system, even when you’re in VCR
or DVD mode, without switching back to AUDIO or TV.
Even more exciting, SimpleSound™ is what is called a
‘Punch Through’ feature and is not limited strictly to volume
control. Click and enjoy!
STEP 1:
In a basic home entertainment
system, the sound may come
from your TV. In a more
advanced system, the sound
may come from your audio
Component such as a Surround
Sound Receiver or Home
Theatre system. So, first, you
need to identify which
Component you want to use in
your system for sound.

time for approximately 3
seconds, until the word “SETUP”
is displayed at the top of the LCD
screen. This signals that you are
now in setup mode.

STEP 2:

Press the PAGE ( ) UP button to
display Page 2 of the Setup
Menu on the LCD screen. Press
the PUNCH display button.

Press and hold the MAIN and
ENT (Enter) buttons at the same

IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.

STEP 3:

STEP 4:
Then press the VOL (Volume)
display button. The screen will
display “VOL” at the top. This
sets up the group of three
buttons (Volume Up, Volume
Down and Mute) in one action!

VOLUME
BUTTON

CUSTOMIZING

SETTING A COMPONENT BUTTON AS MACRO:
If you wish to set one of the Component buttons as a
macro, in STEP 3, press the Page Up button twice. The top
of the display will change to MAIN, and you can navigate to
MAIN page 1 or page 2. Press the Component button you
want to set as a Macro button. The top of the screen will
display the button label you selected. Select the
Component and Page that has a button you want in your
Macro using the MAIN, Component and Page buttons.
Simply press the button(s) with the command(s) you want
in your Macro. Then complete and save the Macro by
following STEPs 12 and 13 as outlined above.

SimpleSound™ Setup & Other ‘Punch Throughs’

SimpleSound Setup &
Other ‘Punch Throughs’

MacroPower™ Setup

SimpleSound Setup &
Other "Punch Throughs"

You can customize the backlighting feature to suit your
specific preferences by following these simple steps:
Adjusting Length of Backlight Time
You can adjust the amount of time that the RF20 backlight
stays on by entering the SETUP mode and proceeding to
page 2 (using the PAGE ( ) UP button), then pressing the
LIGHT display button on the LCD screen (not the Backlight
button). Then enter the amount of time you would like the
light to stay on using the number pad (0-99 seconds). After
making your selection, press the SAVE display button.
The bottom of the display flashes
“PUNCH TO”. Press the button
for the Component that doesn’t
have volume control commands
yet (i.e.,DVD). This is the
Component you are going to
PUNCH TO for the volume and
mute commands.

Press the MAIN button twice to
return to normal operating
mode and test your
SimpleSound™ settings.
NOTE:The Punch Through feature is not
limited to volume and can also be applied
to channel selection or other functions. If
you find yourself switching to a particular
Component frequently to use a group of
controls, consider using Punch Through for
another group, as listed here:

STEP 5:

VOL

The bottom of the display will
then flash “PUNCH FROM”. Now
select the Component that has
the volume commands you want
to use (i.e.,TV for systems using
the TV speakers, AUDIO for systems with surround sound
receivers). The bottom of the display will flash “SAVED”.

STEP 6:
Repeat STEPS 4-5 until all your
Components operate the volume
perfectly.

PLAY
VOD

Volume Up,Volume Down
and Mute
Channel Up, Channel Down,
Previous Ch and Channel
(0-9) buttons.
Play, Stop, Pause, Rewind
and Fast Forward
Guide, Menu, Info, Exit, Up,
Down, Left, Right, Select

Simply perform the steps outlined
above, but in STEP 4, press one
of the control options (CH, PLAY or
VOD).

Adjusting Contrast
You can make the text darker by pressing both the MAIN and
cursor UP buttons at the same time. To make the text appear
lighter, press both the MAIN and cursor DOWN buttons at the
same time.
Turning OFF Backlighting
If you don’t want backlighting at all (this extends battery
life), press the ON display button that appears on the
screen. The ON will change to OFF. Press the SAVE display
button. Exit the setup mode by pressing the MAIN button.
MAIN
BUTTON
UP & DOWN
CURSOR
HIGH
CONTRAST
LOW
CONTRAST

CUSTOMIZING

NOTE: If you want to PUNCH TO the MAIN
Component, press the POWER OFF button
at this time.

STEP 7:

Setting Backlight Options

34
Hiding and Adding Pages

Hiding and Adding Pages

33
Each of your RF20 Components actually contains eight
pages. However, only five pages are visible in the factory
default setting. Three page are hidden in each Component.
If you wish to use the hidden pages, you can ADD it. If you
don’t want to use some of the existing pages, you can HIDE
them. You can add or hide pages on Components OR on
your favorite channel pages using this simple process:
NOTE: Be sure to program your Macros before you hide pages
with potential macros in them. You can’t access hidden pages
during macro setup. However, after you finish Macro setup, you
can hide pages without affecting operation of your macros.

This page is visible.To HIDE
it, press the LIGHT button.

STEP 1:

STEP 2:

STEP 4:

STEP 5:

Press and hold the MAIN and
ENT (Enter) buttons at the same
time for approximately 3
seconds, until the word “SETUP”
is displayed at the top of the LCD
screen. This signals that you are
now in setup mode.

Press the EDIT display button on
the LCD screen.

“PAGE” appears at the top of the
screen. Now, you can navigate
to any page, using the MAIN,
COMPONENT, FAV, and PAGE
display buttons.
PAGE
BUTTON

When you select a page, the top
of the screen indicates whether
you want to “ADD?” or “HIDE?”
the page displayed. When you
want to change a page’s visibility
(i.e., either ADD or HIDE), simply
press the LIGHT button.

STEP 3:
Press the PAGE display button
once the screen changes to
EDIT mode.

IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.

EDIT
BUTTON

FAV
BUTTON
COMPONENT
BUTTONS
PAGE
BUTTON

MAIN
BUTTON

STEP 6:
You can continue to ADD or
HIDE pages on other
Components by repeating
Steps 4 and 5.

STEP 7:
When you are finished
adding and hiding pages,
press the MAIN button four
times to return to normal
operation.

CUSTOMIZING

This page is hidden. To ADD
it, press the LIGHT button.

36
Recalling Pre-Programmed Setup Code
Numbers
In case you didn’t write down the Pre-Programmed Code
Numbers that you used to set up your RF20, you can easily
recall them using this simple process:

If you are fortunate enough to own more than one RF20,
you’ll be happy to know that you can easily copy and transfer all the setup from one RF20 to another. Just follow these
easy steps:

STEP 1:

STEP 4:

STEP 1:

STEP 4:

Write down the code numbers
as they appear for future reference. Page 43 of this manual
provides a convenient space for
you to record your code
numbers.

For both the programmed RF20
that you want to clone, and
unprogrammed RF20, press and
hold the MAIN and ENT (Enter)
buttons at the same time for
approximately 3 seconds, until
the word “SETUP” is displayed
at the top of their respective LCD
screens. This signals that both
remotes are now in setup mode.

Align the two RF20s head-tohead, about an inch apart.

IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.

STEP 2:
Go to Page 2 of the Setup Menu
by pressing the PAGE ( ) button.

STEP 3:
Press the RECAL display button
on the LCD screen. The display
will change to the Recall
screens. The screen automatically switches between four
screens, alternately flashing
Page 1 components and code
numbers, then Page 2 components and code numbers.

STEP 5:
Return to normal operation by
pressing the MAIN button twice.

IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.

STEP 2:
Press a PAGE button on each
remote to bring up Page 2 of
Setup and display the CLONE
button.

STEP 3:
Press the CLONE button on each
remote.

STEP 5:
Press the RECV display button
on the unprogrammed RF20 that
you want to setup by cloning.

STEP 6:
Press the SEND display button
on the programmed RF20 that
you want to clone.

STEP 7:
Press the START button on the
unprogrammed RF20, and then
press the START button on the
programmed RF20 that you want
to clone.
NOTE: Cloning typically takes about 40
seconds. After successful cloning is completed, the newly cloned RF20 will flash
“GOOD”.

STEP 8:
Return to normal operation by
pressing the MAIN button twice.

CUSTOMIZING

Cloning Other RF20s

Recalling Pre-Programmed
Setup Code Numbers

38
Erasing Commands - Overview
You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an
ENTIRE Component’s learned command or macro buttons.
You can also erase ALL your learned commands on all
Components or all your macros or favorite channels everywhere.
If you really want a fresh start, it is possible to reset everything to the factory default settings.
Erasing Learned Buttons, Macros or Favorite Channels
STEP 1:

STEP 2:

STEP 5:

STEP6:

Press and hold the MAIN and
ENT (Enter) buttons at the same
time for approximately 3 seconds, until the word “SETUP” is
displayed at the top of the LCD
screen. This signals that you are
now in setup mode.

Press a PAGE button to display
Page 2 of Setup.

If you press ALL, the RF20 displays a “SURE?” button. After
the SURE button is pressed, all
the buttons will be erased.

To return to normal operating
mode, press the MAIN button
four times.

STEP 3:
Press the ERASE display button
on the LCD screen.

STEP 4:
IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.

Press either the LEARN, MACRO
or FAV button. The following
screen appears:
ALL - Erases ALL of the specified (Learned, Macro or FAV buttons everywhere in the RF20)
DEVICE - Erases all learned or
Macro buttons in a single
Component (NOTE: This option
is not available for FAVs.)

If you press DEVICE, a list of
Components will appear. Press
the Component button that you
wish to erase. The bottom of the
screen will flash ERASE twice,
then ERASED.
If you press KEY, you’ll have to
navigate to the Component and
Page you want using the MAIN,
COMPONENT and PAGE buttons.
Press a button to erase it. The
bottom of the display will flash
ERASE twice, then ERASED.

KEY - Erases one button only.

SURE
BUTTON

ERASING COMMANDS

Erasing Learned Buttons, Macros or
Favorite Channels

Re-setting RF20 to Original
Factory Default Settings
If you want to start with a clean slate, you can re-set the
RF20 its original factory default settings by performing the
following steps.
NOTE: This process will essentially erase EVERYTHING
you have programmed into the RF20.

STEP 1:

STEP 2:

Press and hold both the
MAIN and the STOP buttons
for 10 seconds.

After 10 seconds, the RESET
screen appears. Press the ALL
button. The RF20 will display a
“SURE?” button. Press the
SURE button to erase all of your
settings and return to the factory
default setup

MAIN
BUTTON
STOP
BUTTON

SURE
BUTTON

ERASING COMMANDS

40
Re-setting RF20 to Original
Factory Default Settings

Re-setting RF20 to Original
Factory Default Settings

42
The Optional PowerBlasterTM
(for ‘barrier-free’ RF control)
[Sold separately]
Of all the fabulous RF20 features, this is probably the most
exciting. When used in combination with the optional
PowerBlasterTM, the RF20 becomes an amazing remote
control powerhouse that sends multi-directional RF (Radio
Frequency) signals that pass through walls, doors and
floors - both indoors and outdoors.
This changes everything! It enables you to control
Components that are completely out-of-sight, up to 100’
away. The PowerBlasterTM picks up RF20’s radio frequency
signals from any direction, regardless of distance, so RF20
doesn’t need to be pointed directly at any Component. Just
imagine - no more pointing! Now you can close your
entertainment center doors, hide your Components, and
still control them with ease. Control outdoor speakers on
your patio. Control your Components anywhere!

The PowerBlasterTM converts radio signals to standard
infrared commands and sends them out via a built-in front
blaster to Components in the same cabinet space.

One of the best things about this is -- nothing has to be
done to the RF20 for this feature to work.
Every time you press a button on the RF20, it sends both a
standard IR (Infrared Command) AND an RF (Radio Frequency) signal. If you install the PowerBlasterTM kit, it will
automatically receive RF20’s radio signals and translate them
into the infrared commands that control your Components.
NOTE: The RF20's radio signals will not control Components
directly. You must have a PowerBlasterTM to receive the
RF20's radio signals. Components that came with "no pointing" radio remote controls cannot be operated by the RF20
unless the Component can be switched to standard IR
(Infrared Control) via its internal menus. Some remote control ceiling fans are radio only and cannot be operated by
the RF20.

Self-adhesive “flashers” (included in the PowerBlasterTM
kit) affix to the front panels of your Components. The
flashers relay infrared commands to Components out-ofsight of the PowerBlaster’s front blaster. The flashers plug
into PowerBlaster’s rear flasher line output jacks. Each
flasher has a 10’ cable to easily reach Components on
nearby shelves.

THE POWER BLASTER

The RF20 sends radio signal to the PowerBlasterTM, which
is a radio receiver

‘Barrier -Free’ RF control

44
Pre-Programmed Code Notes
Record the three digit codes for your system here
AUDIO
DVD

The RF20’s Pre-Programmed code library is divided into
categories (TV, VCR, AUX, etc.). Each category actually
includes many types of Components. For example, the VCR
category includes TV/VCR combo units.

CD
SAT
TV
VCR
CABLE

Within each category, the code numbers are listed in rows by
brand (Sony, Panasonic, B & K, etc.). Some brands have more
than one three digit code for you to try. Just circle the correct
row and refer to it while you setup (step by step instructions
for using Pre-Programmed codes are found on page 7).
TV

TVs, Plasmas, Projectors and Monitors

CABLE

Cable TVs and Web TVs

PHONO

DVD

DVD Players and TV/DVD Combos

TV2

VCR

VCRs and TV/VCR Combos

AUDIO

Amps, Preamps, A/V Receivers and XM Radios

SAT

Satellite Receivers

CD Players and CD Changers

DVR

TiVo, Replay and other DVR’s

AUX

Tape Decks, Lighting Controls, Multimedia PCs,
Xbox, iPod and Custom Installation Products

AUX
LIGHT
TAPE

VCR2
DVR
LDP
XM RADIO
IPOD
X-BOX

PRE-PROGRAMMED CODE TABLES

PRE-PROGRAMMED CODE NOTES

Pre-Programmed Code Tables

Pre-Programmed Code Notes

ADMIRAL
ADVENT
AKAI
A MARK
AMPRO
AMSTRAD
ANAM
AOC
APEX DIGITAL
AUDIOVOX
BARCO
BLAUPUNKT
BROKSONIC
CAIRN
CANDLE
CAPEHART
CETRONIC
CITIZEN
CLASSIC
CONCERTO
CONTEC
CORONADO
CRAIG
CROWN
CURTIS MATHES
CXC
DAEWOO
DAYTRON
DELL
DREAMVISION
DWIN
DYNASTY
DYNATECH
EIKI
ELECTROHOME
EMERSON
EPSON
ESA
FISHER
FUJITSU
FUNAI
FUTURETECH
GATEWAY
GE
GOLDSTAR
HALL MARK
HANNSPREE
HITACHI
HP
HYUNDAI
INFINITY
INFOCUS
INSIGNIA
JBL
JCPENNEY
JENSEN
JVC
KEC

CODE NUMBERS
072 081 161 160
247
197 146 248
112 143
167 073 157 183
052
043 054 056 080 112 131
197 004 112 058
006 310
076 273
233
088
238
201
197 002 003 004
058
043
197 002 003 004 043 101 103 143
043
004
043 050 051
143
043 054
043 143
197 101 004 143
043
004 016 043 044 076 103 114 125 127 143
004 143
319 320 321
235 345
177 257
043
062
187
143 024 076 196
028 048 043 155 005 197 004 047 050 051 076 096 143 151
153 154
324
323
007 057
198 246 346
028 043
043
242 268
160 144 165 073 197 008 009 034 056 074 130 155 161 004
091 157 183
113 116 102 004 106 112 119 127 143
004
381
011 163 166 004 009 010 012 023 075 143 158 072
316 327 378
337 338
164
230 330 333
350
164
004 024 197 008 009 030 065 101 143 156 160
013
038 034 070 083 145 199 210 240 241
043

BRAND
KENWOOD
KLOSS
KMC
KTV
LG
LODGENET
LOEWE
LOGIK
LUXMAN
LXI
MAGNAVOX
MARANTZ
MATSUI
MAXENT
MEMOREX
METZ
MGA
MINERVA
MITSUBISHI
MTC
NAD
NEC
NIKEI
NUVISION
ONKING
ONWA
OPTONICA
OPTOMA
ORION
PANASONIC
PHILCO
PHILIPS
PIONEER
POLAROID
PORTLAND
PROSCAN
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROCTEC
RUNCO
SAMPO
SAMSUNG
SANYO
SCEPTRE
SCOTT
SEARS
SELECO
SHARP
SIEMENS
SIM2
SIGNATURE
SOLE
SONY
SOUNDESIGN
SPECTRICON
SSS

CODE NUMBERS
197 070
002 059
143
043 197 143 154
113 116 102 004 106 112 119 127 143 243 284 363 365
072
164
072
004
166 007 015 052 081 160 164
164 059 197 003 060 061 004 063 064 127 022 160 094 239
226 273
197 164 184
164
242
007 072 004
088
197 004 024 028 042
088
109 124 024 004 028 040 042 146 191
197 004 062 101
015 025
132 130 134 197 040 016 024 056 019 236 237 262 272
043
351
043
043
019 081
265 270
096
034 056 080 092 164 208
197 003 059 060 064 164 004 024 056 063
164 005 093 038 197 003 004 059 127 184 206 239 259
135 025 197 018 023 116 190 234 335
138 268 328 353 354 356 388
004 143
144 160 161 165 167
004 131 058 143 171 173 193
034 056 092
019 004 143 043 127
160 165 065 156 144 161 197 004 024 056 152 023 074 333
007 019 043 047
186
168 169 178 179 180 181 182 183 073 157 340
197 058 004 202
050 089 101 105 004 127 143 160 228 229 258
166 007 020 053 057 082 187
276
028 043 004 048 143
015 030 004 007 028 057 143 094 160 082 165 166
189 200 205 227
081 019 014 170 028 029 004 022 143 175 251
088
189 200 205 227
072
231 232
070 139 147 126 185 194 085 213 277 279
028 004 003 043
112
004 043

CODE TABLES

BRAND

SUPRE MACY
SVA
SYLVANIA
SYNTAX OLEVIA
TANDY
TATUNG
TECHNICS
TECHWOOD
TEKNIKA
TELEFUNKEN
TELERENT
TERA
TMK
TOSHIBA
TOTEVISION
UNIVERSAL
VIDEO CONCEPTS
VIDIKRON
VIDTECH
VIEWSONIC
VIZIO
WARDS
WESTING HOUSE
WINBOOK
YAMAHA
YORK
YUPITERU
ZENITH
ZONDA

CODE NUMBERS
002
328
197 003 059 060 063 064 164 044 160 127
376
081
056 062
034 080
004
002 003 004 024 028 043 072 101 143
037 046 086 087
072
172
004
015 138 030 007 040 062 101 325
143
008 009
146
174 184 188 192 340
004
242
386 387
004 008 009 019 028 060 061 063 064 072 074 143 164 034
076 280
339
197 004
004
043
073 072 095 103 157 183 243 284
112

BRAND
ABC
ADELPHIA
ADVANCED NEWHOUSE
ALTRIO
AMERICAST
ARCHER
ARMSTONG
AT&T BROADBAND
ATLANTIC BROADBAND
BELL SOUTH
BLUE RIDGE
BRESNAN
BRIGHT HOUSE
BUCKEYE COMM
CABLEVISION
CENTURION
CENTURY
CHARTER
CITIZEN
COGECO
COMBANO
COMCAST
COMSAT
COX DIGITAL
DIGICABLE
EAGLE
EASTERN
ECHOSTAR
ELECTRICORD
GEMINI
GENERAL ELECTRIC
GENERAL INSTRUMENT
GNC
GOLDEN CHANNEL
HAMLIN
HITACHI
INSIGHT
JERROLD
MAGNAVOX
MASSILLON
MEDIA ONE
MEDICOM
MEMOREX
MITSUBISHI
MOTOROLA
MOVIE TIME
MOXI
NCTC
NSC
OAK
PACE
PANASONIC
PARAGON
PHILIPS
PIONEER
PRUCER
PULSAR
RCA
RCN
RECOTON

CODE NUMBERS
004 103 003 039 042 046 053
043 074
043
043
099
005 007 014
074
074
043 074
099
043 074
074
043 110
074
043 074 108
092
007
043 074
007
074
080 081
043 074 110
074
043 074
101
020 030 040
057 066
106
032
008 054
072
074 103 104
099
030
049 050 055
103 055
074
074 004 103 002 003 008 009 010 069
010 012 064 079 095 094
074
107
074
052
102
074 110 109 111
028 032
111
074
015 028 038 071
031 037 053
043 074
044 047
052
006 012 013 020 085 095
043 103 034 051 063 076 105
059
052
047
074
098

CODE TABLES

BRAND

CABLE / WEBTV

REGAL
REGENCY
RODGERS
SAMSUNG
SCIENTIFIC ATLANTA
SEREN
SERVICE ELECTRIC
SHAW
SIGECOM
SONY
SPRUCER
STARCOM
STARGATE
SUSQUEHANNA
TIME WARNER
TOCOM
TOSHIBA
UNITED CABLE
UNIVERSAL
VIDEOTRON
VIEWSTAR
WIDE OPEN WEST
ZENITH

CODE NUMBERS
049 050
057
043
030
043 011 003 041 042 045 046
043
074
074
043
096 108
047 078
002 004 008 009
008 030 097 104
043 074
043 074
039 040 056
052
004 053
005 007 014 032 035
043
012 015 018 086 087 088 089
043 099
052 060 093 100

BRAND
AIWA
ALPINE
APEX DIGITAL
ARCAM
CAMBRIDGE AUDIO
CARY AUDIO DESIGN
CLASSE
COBY
DENON
FUNAI
GATEWAT
GE
GO VIDEO
HARMAN KARDON
HITACHI
ILO
INTEGRA
JVC
KENWOOD
KISS
KLH
KRELL
LEXICON
LG
LITEON
MAGNAVOX
MALATA
MARANTZ
MERIDIAN
MITSUBISHI
MYRYAD
NAD
NAKAMICHI
ONKYO
OPPO
PANASONIC
PHILIPS
PIONEER
POLAROID
PRIMARE
PROCEED
PROSCAN
RCA
RJTECH
ROTEL
SAMSUNG
SANSUI
SANYO
SENSORY SCIENCE
SHARP
SONY
SYLVANIA
SYMPHONIC
TAG MCLAREN
TATUNG
TEAC
THOMPSON
THULE
TOSHIBA
VENTURER

CODE NUMBERS
146
098
087 111 115 112 116
122
215
174
167
258
007 080 173
143
175
026 027
137 218 220 221 222
084 140
101
268
142 180
012
151
179 279
135
104
148
091 057 074
264 265
066 096
267
083 095
153
017
102 134
088 155
103
076 035 180
266
021 042 138 139 144 150
066 083 095 105 166
023 092 099 107 108 131
233 234 237
193 194
086
026 027
026 027
269
204
056 070 119 165 170 137 159
154
147
222 223
094
033 118 145 126 191
143
143
156
102
270
026 027
177
035 034 130 141 164 188
149

CODE TABLES

BRAND

DVD

CABLE / WEBTV

CODE NUMBERS

VINC
YAMAHA
ZENITH

161
042 089 166 195 197
057 074 091

DVD-TV/DVD Combos
AIWA
FUNAI
SAMSUNG
SYLVANIA
SYMPHONIC
TOSHIBA

146
143
165
143
143
130

DVD-TV/DVD/VCR Combos
MAGNAVOX
PANASONIC
SYLVANIA
TOSHIBA

143
144
143
164

DVD-DVD/VCR Combos
GO VIDEO
PANASONIC
PHILIPS
POLAROID
SAMSUNG
SANSUI
SONY
TOSHIBA
ZENITH

137 218
150
105 (VCR Functions for VCR 067)
234
137 159
154
145 191
141
091 (VCR Functions for VCR171)

DVD-DVD Recorder
GATEWAY
GO VIDEO
ILO
KISS
LITEON
PANASONIC
SENSORY SCIENCE
SONY
TOSHIBA

175
220 221 222
268
279
265
139
222
191
188

DVD-LD
DENON
FUNAI
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
OPTIMUS
PANASONIC
PHILIPS
PIONEER
RADIO SHACK
RCA
REALISTIC
RUNCO
SANYO
SHARP
SONY
TECHNICS

206 207
120
152 013
032 121
211
121
121
049 013
113
032
106 117 121
120
002
049
127
075
152 013
053 110
113

BRAND
THETA DIGITAL
TOSHIBA
YAMAHA

CODE NUMBERS
032
152 106
043 129

CODE TABLES

BRAND

DVD

AIWA
AKAI
AMPRO
ANAM
AUDIO DYNAMICS
BROOKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GE
GO VIDEO
GOLDSTAR
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNEY
JENSEN
JVC
KENWOOD
LG
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
MATSUI
MEI
MEMOREX
MGA
MINOLTA
MITSUBISHI
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
ORION
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RADIO SHACK

CODE NUMBERS
034 161
016 146 043 046 124 125 142
072
031
012 023 039 043
035 037 129
028 031
108
003 040 135
031 041
111 116 117 119 005 007 010 065 108 110 112
108
012 023 039 043
034 053
059
006 029 035 017 025 027 031 034 036 037 046 101 129 131
138 153 162 116
003 010 008 009
034
031 072 147 063 107 109 144
132 136 155 040 115
101 106 114 013 020 012 123
012 045
004 026 150 018 034 043 063 137 160 013
031
031
012 013 015 040 066 101
043
048 043 130 150 055 060 012 031 050 152 166
014 048 034 047
101 106 114 013 020 012 123
034
034 003 009 017 106
040
067 031 034 068 041 156 164
067 069 012 031 156
101
027 030
031
101 003 010 014 031 034 053 072 102 134 139
045 046 059
013 020
059 061 151 013 020 045 046 051 142 049 168
034 040
024 034
012 023 039 043 048
043
053 054
025
066 070 145 083 133 140 157 163 074 167
013 020 031 063
031 034 067
031 067 034 101 054 071 156
101
021 013 048
108
072
002 014
066 145 075
123

BRAND

CODE NUMBERS

RCA
REALISTIC
RICO
RUNCO
SALORA
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SIGNATURE
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH

107 109 144 147 158 041 145 013 020 140 034 040
003 008 010 014 031 034 040 053 054 101
058
148
014
102 104 113 115 112 120 032 040 066 107 109 122 125
022 043 048 135
003 010 007 014 134 102
017 037 112 129 131
003 008 010 014 081 013 101 009 017 073 112
149 054 031 159 165
024
034
056 057 058 077 052 003 078 076 031 149 154
034
013
031 034 059 067
034
010 034
039 043
034 039 043
031 070
031 019 034 101
034
006
112 131 079 008 059 047 082 013 042 081
040 101
040
012
048
012 034 046 141
040
003 013 017 024 031 034 040 053 054 131
012 034 039 043
072 080 056 048 101 034 058

VCR-TV/VCR Combos
DAEWOO
EMERSON
FUNAI
GOLDSTAR
HITACHI
JCPENNEY
LG
LLOYD
MAGNAVOX
MEMOREX
PANASONIC
PHILIPS
RADIO SHACK
RCA
SEARS
SONY
SYLVANIA
SYMPHONIC
THOMAS
ZENITH

005 117
153
034
101 123
034
101
101 123
034
034 067
101
070 167
034 067
123
034
101
057 154
067
034
034
034

CODE TABLES

BRAND

VCR

ADC
ADCOM
AIWA
AKAI
AMC
AMEND
AMX
ANGSTROM
ANTHEM
ARCAM
ATLANTIC TECHNOLOGY
AUDIO ACCESS
AUDIO ALCHEMY
AUDIO DESIGN
AUDIO EASE
AUDIO FILE
AUDIO MATRIX
AUDIO SOURCE
AUDIO TECHNICA
B&K
BOSE
BOSTON ACOUSTICS
BRYSTON
CAMBRIDGE AUDIO
CARVER
CASIO
CHIRO
CINEMA SOUND
CITATION
CLARION
CLASSE
COMPAQ
CURTIS MATHES
DELPHI
DENON
EAD
EIGER
ELAN
ENLIGHTENED AUDIO
ESCIENT
FANFARE
FISHER
FLEXTRONICS
FOSGATE
FOSGATE AUDIONICS
GE
GOLDSTAR
HAFLER
HARMAN KARDON
HITACHI
IMERGE
INKEL
INTEGRA
JAMO
JBL
JCPENNEY
JEFF ROWLAND
JENSEN
JVC

CODE NUMBERS
007
082 092 225 161 269 355 356 366
170 018 104 202 203 213 211 188
138 189
125 126 127 128 258 281 282 038
054
196
142
335 336 337 338 339
141 418 419
342
147
135
194 221 011
021 196 207
071
167
273
134
096 097
070 170 224 347 409 459 460 532
447
023
522
006 028 061 071 201 214 226 180 185 022 029 077 284
076
140
034 134
148 272
026
537
382
076
415 515
002 034 109 215 229 230 027 037 234 259 330 340 341 349
350 400 401 402 444 564
466
149
057 290
099 098
368 381 451 452 453 454
352
047 214 180 182 297
378
062 231
342
056 260
008
174
231 233 254 153 154 118 121 227 277 317 318 365
020
371
197
354 438
398
263
076 216
206
058
240 163 191 114 266 279 291

BRAND
KENWOOD
KINERGETICS
KLH
KOSS
KRELL
KYOCERA
LEXICON
LINN
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MERIDIAN
MITSUBISHI
MONDIAL
MYRYAD
NAD
NAKAMICHI
NEC
NIRO
NILES
ONKYO
OPTIMUS
OUTLAW
PANASONIC
PARASOUND
PHAST
PHILIPS
PIONEER
POLKAUDIO
PRIMARE
PROCEED
RCA
REALISTIC
REQUEST
REVOX
ROTEL
RUSSOUND
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHERWOOD
SONY
SOUNDESIGN
SOUNDMATTERS
SOUNDSTREAM
SSI
SUMO
SUNFIRE
TAEKWANG
TEAC
TECHNICS
THETA DIGITAL

CODE NUMBERS
026 066 145 146 181 190 197 192 182 199 151 222 180 005
280 374 550
220 140
331
216 573
150 072 376 384
007
120 235 236 237 357 358 359 360 361 362 363 364
124 377
137 139 052 165 115 004 009
076 056
086 164 152 208
006 028 031 040 063 185 186 251 265 119 289 296 492
238 286
076
100 012 013
242 243 204
157 158 042 043 081 112
276 293
186 113 283 478 479
111 244 245 172 183 287
176
343
403
017 046 064 107 108 187 079 080 090 179 209 270 275 438
026 041 138
342
032 195 219 177 292 383 516
129 130 132 261 294 295 333 334
196
249 250 251 063 119
014 033 039 044 045 050 069 159 168 116 035 078 198 480
029 515
464
144 268
010 048 117 156 067 288
019 056 073 075 095
351
162
074 083 085
379 391 392
016 571
040 048 110 119 065 228
047 059
019 091
076
026 094 131 175 181
024 038 055 102 103 105 106 051 030 447
018 093 223 247 248 160 166 015 101 184 218 271 353 369
372 380 417 421
036
375
084 088
068
171
344 345 346 494
138
005 019 049 111 212 217
122 176 193 219 178 177 200 257 262
136

CODE TABLES

BRAND

AUDIO

TOSHIBA
WARDS
YAMAHA

CODE NUMBERS

ZENITH

060 087 198 278
180
026 253 169 067 173 205 264 232 089 264 274 285 332 373
432 433
143 210

AUDIO-XM Radios & Tuners
BOSE
DELPHI
FANFARE
KENWOOD
POLKAUDIO
SONY

170 532
415 515
352
550
515
380

BRAND
CABLEVISION / VOOM
DIRECTV
ECHOSTAR / DISH
EXPRESSVU
GENERAL ELECTRIC
GENERAL INSTRUMENT
GOI
HITACHI
HTS
HUGHES
JVC
LG
MAGNAVOX
MEMOREX
MITSUBISHI
MOTOROLA
NEXT LEVEL
PANASONIC
PANSAT
PAYSAT
PHILIPS
PROSCAN
RADIOSHACK
RCA
SAMSUNG
SKY
SONY
STAR CHOICE
TOSHIBA
UNIDEN
ZENITH

CODE NUMBERS
148
173
122 167 168
122
151 106 150
148
122
139 140
122
161 162 068 154 165 166 108 117
122
170
136
136
068 154
148
148
142 160
172
136
152 153 156 068 154 136 108 117
151 106 150
148
151 106 150
123 155 163 169 175
164
103
148
127 068 154 157 158
136
159

CODE TABLES

BRAND

SAT

AUDIO

ADCOM
AIWA
AKAI
AMC
AMEND
ARCAM
AUDIO ACCESS
AUDIO EASE
AUDIO TECHNICA
BSR
CALIFORNIA AUDIO
CAPETRONIC
CARRERA
CARVER
CASIO
CLARINETTE
CREEK
CROWN
DENON
EMERSON
FISHER
FRABA
GENEXXA
GOLDSTAR
HAITAI
HARMAN KARDON
HITACHI
INKEL
JCPENNEY
JENSEN
JVC
KENWOOD
KOSS
KRELL
KYOCERA
LOTTE
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
MISSION
MITSUBISHI
MITSUMI
MODULAIRE
MONDIAL
MYRYAD
NAD
NAKAMICHI
NEC
NIKKO
NSM
ONKYO
OPTIMUS
PANASONIC
PARASOUND
PHILIPS
PIONEER

CODE NUMBERS
062 042
059 065 088 089 105 122 170 187
085 195 202
231 232
118
238
119 147
165
046
037 057
103 008
063
057 080
185 041 044 050 086 107 130 134 135 138 139 203 204 167
111 182
182
159
035
002 123
042 069 102
050 185 134 008
111
010 069 102
080
093
018 033 047 208
042 175
130 143 144
014 061 092 141
158
004 022 136 163 213 214 242 243
185 007 023 055 071 072 142 137 254
061
241
005
102
011 028 070 076 249 252
059
044 107
027 041 044 051 077 107 209 246
212 247
014 073 092
010
044 107
179
153
182
147
244 155
006 005 067 178
217 218 219 095
014 062
046
044 107
030 038 039 168 169
010 050 057 058 081 082 083 085 093 195
103 201 172 008 068 248
233 240
041 044 107 246 253
010 020 025 056 174 175 176

BRAND
PROCEED
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROTEL
SAE
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SIGNATURE
SONY
SOUNDESIGN
SUMO
SYLVANIA
SYMPHONIC
TAEKWANG
TANDY
TEAC
TECHNICS
TECHWOOD
THETA DIGITAL
TOSHIBA
VECTOR RESEARCH
VICTOR
WARDS
YAMAHA
YORX

CODE NUMBERS
239
044 107 228
103 008
182
017 042 150
042 050 051 102 181 182 187
044 107 161 178 250
044 107
044 069 107 128 171 190 125
050
069 102
026 031 051 066
003 019 051 096 112 115 119 166
033
048 081 097 126 133 177 225 226 164
251
155
044 107
052 181
195 085
010
015 034 036 051 052 101 131 140 079
060 103 200 172 184 008 068
076
234 235
006 067 091 160 148
080
004 022 114 124
185 033
024 046 054 186 183 245
182

CODE TABLES

BRAND

DISH
ECHOSTAR
HUGHES
HUMAX
JVC
PHILIPS
RCA
REPLAY NETWORKS
SONY
TIVO
TOSHIBA

CODE NUMBERS
122
122
108 117
117
122
108 090 117
109
075
104 105
090 117
117

BRAND

CODE NUMBERS

3M
AIWA
APPLE/iPod
ARCHER
AURORA MULTIMEDIA
AUTON
BOSE
CELADON
CRESTRON
DELL
DMX
DRAPER SCREEN
DREAMVISION
DWIN
EVERQUEST
EXTRON
FAROUDJA
FUJI
GATEWAY
HAUPPAUGE
HP
HUNTERDOUGLAS
JERROLD
JVC
KENWOOD
KENSINGTON
KEYSPAN
LITE-TOUCH
LUTRON
MAKITA
MICROSOFT/XBOX
MINDPATH
NILES
NSM
PIANO DISC PLUS
POLKAUDIO
RUSSOUND
SCIENTIFIC ATLANTA
SIMA
SOLO ELECTRONICS
SOMFY
SONY
STARCOM
TURBOSCAN
VELODYNE
X-10
XANTECH

152
164
401
155
220
191
409
221
213 214 215 216 217 218
261 262
156
204
097
080 253
206
151
184
209
261 262
294 295
261 262
219
153
185
185
406
297
208 257
158 159 077
186 201
408 107
205
160 187
161
085
162
081
163 156
082
207
078 079
164 165 166 261 262
153
167
203
183 093
168 169 170 171 172 188 189

AUX-TAPE
AIWA
CARVER
DENON
FISHER
GOLDSTAR
HARMAN KARDON
JVC
KENWOOD
LINN
LUXMAN
MAGNAVOX

015 071 100 114
006 008 027 024 036
105 227 229
064
011
233
106 116 239 240
005 013 023 026 064 145 146 181 190
124
035 137 139
027

CODE TABLES

BRAND

AUX

DVR

CODE NUMBERS

MARANTZ
MCINTOSH
MITSUBISHI
NAD
NAKAMICHI
ONKYO
OPTIMUS
PANASONIC
PHILIPS
PIONEER
QUASAR
SANSUI
SHARP
SHERWOOD
SONY
TEAC
TECHNICS
TOSHIBA
VICTOR
YAMAHA

014 027 056 065 087
238
242 243
029 048
244 245 025
002 012 016 017 018 019 115
026 054 055
007 010 032 088 195
027 087
003 039 047 050 066 098 222
007 088
027 113 119 224
026 057 131 175 181
038 004 028 030 033 034
020 022 052 084 089
009 059 212
007 010 076 088 109 122 193
112
106
021 026 031 067 040

AUX-Media PC Controls
DELL
GATEWAY
HAUPPAUGE
HP
KEYSPAN
SONY
TOSHIBA
WINBOOK

261 262
261 262
294 295
261 262
297
261 262
261 262
261 262

AUX - XBox Controls
MICROSOFT/XBOX

408 107

AUX-iPod Controls
APPLE/iPod
BOSE
KENSINGTON

401
409
406

NOTES

CODE TABLES

BRAND

NOTES

AUX

66
Frequently Asked Questions

Warranty

What is a “macro” button?

Universal Remote Control’s MastercontrolTM RF20 is
covered against any manufacturers defects or
workmanship for a period of one year from the date
of purchase if purchased from an authorized Universal
Remote Control dealer. Units purchased from online
auction sites or other unauthorized resellers have no
warranty. This warranty does not cover the
following items:

A “macro” is a button on the RF20 that you setup to make
a lot of things happen when you press it. For example, to
watch a DVD in most home theaters requires several
remote controls and many button presses (power up the
TV, power up the surround sound, power up the DVD
player, set the TV to the correct video input, set the
surround sound to the correct audio input and finally;
press play on the DVD player remote control).
Instead of pressing all of those buttons one at a time, the
RF20 enables you to setup one button that does all those
steps automatically with one press. For more
information on how and why you should setup macro
buttons, watch the Quick Setup DVD Program Guide or
refer to pages 26-29 in this Manual.

If the batteries run out, will I lose my settings?
No. The RF20 stores all of your settings in non-volatile
FLASH memory. You could remove the batteries for
months, replace them at your convenience, and the RF20
would still remember your settings.

Who can I call for more answers?
The Universal Remote Control Technical Support and
Customer Service staff are ready to answer any questions
you might have.

- Damage from misuse, neglect, or acts of nature
- Products that have been modified or incorporated into
other products
- Products purchased more than 12 months ago
- Units purchased from unauthorized dealers
or companies

Specifications
Learning Capability - 825 IR commands at standard
frequencies (15kHz to 100kHz)
Macro Capability - 453 Macros of up to 190 steps each
IR Range (Line of Sight via Infrared): 30-50 feet,
depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending
upon the environment
RF Frequency: 418MHz
Weight: 7.1 oz. (with batteries)
Size: 8.5” x 2.5” x 1”
Batteries: Four AAA Alkaline batteries included
LCD Size: 0.88” x 1.88”

OTHER INFO

Call us at 1-914-835-4484
Monday - Friday, 9AM to 6PM (EST)

Warranty/ Specifications

Frequently Asked Questions

RF20
simply MORE powerful

500 Mamaroneck Avenue
Harrison, NY 10528
Phone: 1-914-835-4484
FAX: 1-914-835-4532
www.universalremote.com
OCE-0046B_rev01

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Page Count                      : 35
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f8201f76-a05c-4584-b9fd-fc60801001b9
Producer                        : ezPDFGate with Acrobat Distiller
Create Date                     : 2005:12:11 07:16:00Z
Modify Date                     : 2006:06:26 12:38:10-04:00
Metadata Date                   : 2006:06:26 12:38:10-04:00
Creator Tool                    : QuarkXPress3.3: LaserWriter 8 KH-8.7.1
Document ID                     : uuid:f17d0df8-835c-4edd-b458-ee20d06805a8
Format                          : application/pdf
Creator                         : //
Title                           : OCE-0046B
Author                          : //

EXIF Metadata provided by EXIF.tools

Universal Remote Control Univeral Urc Rf20 Owners Manual OCE 0046B

Navigation menu

Versions of this User Manual:

Views

Navigation