Universal Scientific B2B114800 IEEE 802. 11b WLAN Board-to-Board Card User Manual WLAN Card Quick guide USI 030218

Universal Scientific Industrial Co., Ltd. IEEE 802. 11b WLAN Board-to-Board Card WLAN Card Quick guide USI 030218

Contents

Users Manual Part 2

b. Tap Add or Edit to add or edit the
selected profile.
c. Tap Delete to delete the selected
profile.
4. Tap Next, and set the
Network Name.
5. Tap Next, and configre
your security settings.
6. Tap Next, and turn Power Management on or off.
7. Click finish.
Finding Information
• For more information, see the User's Guide on the CD that came with the card.
• For the latest information, go to the USI website at www.usi.com.tw
The Identification of the Product :
Product Name : IEEE 802.11b WLAN Board-to-Board Card
Model Number : B2B114800
Technical Support :
Universal Scientific Industrial Co., Ltd.
Address : 10F, 420, Keelung Road, Sec. 1, Taipei, Taiwan
Telephone : +886-2-2345-5006
Fax : +886-2-2345-5191
E-mail : usi@ms.usi.com.tw
Technical Support in the US :
Address : 3590 Peterson Way, Santa Clara, CA 95054, USA
Telephone : +1-408-986-6589
E-mail : usi@ms.usi.com.tw
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Information in this document is subject
to change without notice.
2003 Universal Scientific Industrial
Co.,Ltd. All rights reserved.
Reproduction in any manner whatso-
ever without the written permission of
USI is strictly forbidden.

Navigation menu