Universal Scientific UB22111S Bluetooth Module User Manual UB2 2111 S

Download:
Mirror Download [FCC.gov]
Document ID	281124
Application ID	1DtXRUQ1JGcqyZxYYpDKwQ==
Document Description	Revised manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	151.04kB (1887968 bits)
Date Submitted	2002-11-05 00:00:00
Date Available	2002-11-05 00:00:00
Creation Date	2002-10-29 11:14:45
Producing Software	Acrobat PDFWriter 4.05Windows NT ª©
Document Lastmod	2002-11-05 11:49:47
Document Title	UB2-2111-S User Manual.PDF
Document Creator	Microsoft Word - UB2-2111-S User Manual.doc
Document Author:	Administrator

UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Trademark Information
BTW is a product of Widcomm Inc.
Windows, Windows 98, Windows NT, Windows Millennium, Windows XP are trademarks of Microsoft
Corporation. Internet Explorer is a product of Microsoft Corporation.
The BLUETOOTH trademarks are owned by Bluetooth SIG and used by USI under license.
T39 handset is a product of Ericsson.
All other trade names mentioned in this document or the other documentation provided with this
product are trademarkes or registered trademarks of their respective holders.
Page 1
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Table of Contents
Item
Hardware Specification
Connector Pin outs
Mounting Guide for Antenna Radiation
Impedance Matching of Antenna
System Requirement
Bluetooth Software Install step by Step
Start Connection Over The Bluetooth Airwaves – File Transfer
Connecting Over The Bluetooth Airwaves – Security
Start Connection Over The Bluetooth Airwaves – Dial Up Networking Profile
Technical Support
Page 2
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Page
8-14
15 - 18
19 - 20
21 -23
24
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Hardware Specification
Conducted Power: 0.8mW
Frequency Range: 2.402GHz~2.4835GHz
Modulation: GFSK
Sensitivity: -80 dbm
Data Rate:
Asynchronous :723.2kbps/57.6kbps
Synchronous :433.9kbps/433.9kbps
Operating Voltage:
+3.3VD
Operating systems:
Windows 98SE
Windows ME
Windows 2000
Windows XP
Antenna Peak Gain @ 2.45GHz: 0.5dBi
Dimesion
Length: 36.00 mm
Width: 13.80 mm
Height: 3.8 mm
Page 3
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Connector pinouts
Type-A Type-B
Module Pin Name
PIN # PIN #
Usage for
Platforms
GND
GND
USB_D+
USB_D+
USB_D-
USB_D-
USB_PWR
USB_PWR
10
RSVD
Test Point, COEX1
HW_RADIO_DIS#
HW_RADIO_DIS#
RSVD
Test Point, COEX2
+3.3V
+3V_SUS
LED_BT_RadioState
BT_RADIO_ON
10
GND
NC
Page 4
Description
Ground.
USB Data +. Must be routed with USB_D- as a
90Ω differential pair.
USB Data –. Must be routed with USB_D+ as a
90Ω differential pair.
This is a 5V rail that is used by bus-powered USB
devices. The module does not actually draw
power from this pin, uses this pin to detect
whether the USB host port is powered so as to
avoid latch-up conditions.
Reserved. This pin may be used for resolving
coexistence with the 802.11 radio(s) on the MPCI
card in the platform.
Active low input from the platform to the card to
disable all the radios on the module from
transmitting.
Reserved. This pin may be used for resolving
coexistence with the 802.11 radio(s) on the MPCI
card in the platform. .
This is the rail from which the module powers
itself (as a self-powered USB device).
Active-high LED drive signal for indicating the
state of the Bluetooth Radio. This LED should
not have a flashing feature.
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Mounting Guide for Antenna Radiation
In order to achieve longest communication range, please keep the area surrounding antenna free of grounding or metal
housing.
Ground should not come in this area
Antenna
UB2-2111-S
Do not completely cover
the antenna portion with
ground plates.
Ground
Covering only one side of
the antenna is acceptable.
Ground
But the distance between
ground plate and antenna
should be keep as far as
Ground
Page 5
possible.
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Impedance Matching of Antenna
UB2-2111-S utilizes a monopole printed antenna for radiate communication. Application environments,
such as notebooks, PDAs, printers or other handheld devices, both have plastic housings, different
motherboards and other mechanism structures. These factors will cause the deviation of antenna
central frequency. Therefore, impedance matching of antenna should be optimized for various
applications to achieve longest communication range. Please consult USI for further information.
Page 6
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
System Requirements
BTW runs under:
- Windows 98 (Second edition)
- Millennium (Windows 98 ME)
- Windows 2000
- Windows XP
During the installation, you need a CD-ROM driver for access to the bundle software.
Page 7
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Bluetooth Software Install step by step
Step 1 Insert the Widcomm BTW CD into the PC’s CDROM drive . Installation proceeds automatically.
Since Windows NT does not support USB, the installation of the CD should be done on
systems with Windows ’98 or Windows 2000.
Step 2 An InstallShield box appears to inform you the installation Wizard is being set up. Please wait.
Step 3 A Welcome To The Installation Wizard
window appears as shown in Figure 2.
Select Next to continue the installation
process.
Figure 2. Welcome Window
Note: These images were captured from a
Windows 2000 system. Your images may
look slightly different.
Page 8
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 4 The license agreement window appears as
shown in Figure 3. If you accept, mark the “I
accept the terms in the license agreement”
option and click on Next. The installation will
proceed. If you do not accept the conditions of
the agreement, the installation process will
terminate.
Figure 3. License Agreement Window
Step 5 A Device Information window opens as shown in
Figure 4. Enter a device name and choose a
device type. These options will not affect the
functionality. The device information is used to
inform the master device what kinds of other
devices are within range to connect to so the
user can identify which device is the one they
need to connect to if there is more than one
device within range. Select the Next Button.
Figure 4. Device Information Window
Page 9
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 6 A Destination Folder window appears as shown
in Figure 5, which states the default location and
gives you the opportunity to choose an
alternative folder. When the location is
acceptable, select Next.
Figure 5. Destination Folder Window
Step 7 A Ready to Install Program window appears as
shown in Figure 6. Select Install when you are
ready to proceed.
Figure 6. Ready to Install Window
Page 10
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 8 An Installing Widcomm Status window appears.
Please be patient, this may take up to 5 minutes.
Step 9 A notification window appears asking you to
restart your system. Select Yes to proceed.
Figure 7. Installing Window
Step 10 You will be informed when the installation is
completed. Select Finish. Follow the
instructions thereafter. You may be asked to
restart the computer after the installation
completes. In that case click OK and restart
the computer.
Figure 8. Install Complete Window
Page 11
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 11 A Bluetooth Neighborhood logo has appeared on your desktop and a small Bluetooth icon has
appeared on your icon tray (lower right-hand side of the screen).
Step 12 And you can check it in the My computer > Device Manager.
You may now remove the Widcomm CD from
your CD drive.
Figure 9. Device Manager Window
Page 12
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 13 Let’s configure your devices. On your icon tray (lower right-hand side of the screen), right click on
the small Bluetooth Neighborhood icon on your icon tray.
Step 14 A pull down window appears with two words,
Security (which we will discuss later) and
Configuration. Choose Configuration.
Step 15 A Bluetooth Configuration window appears as
shown in Figure 10. In this document, there are
three tabs-of-interest: General, Information
Exchange, and Hardware. Select the General
tab.
Step 16 Type in a name for your device and choose
either Laptop or Desktop. The security
option’s default is medium; leave that as it is
for now. Select OK.
Figure 10. Bluetooth Configuration Window General Tab
Page 13
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 17 Now choose the Information Exchange tab
as shown in Figure 11. The My Shared
Directory window allows you to determine
where you would like to locate files you want
to share with other devices. The default is
called File Transfer. My Inbox Directory is the
dialogue window that allows you to determine
where you wish to put incoming files.
Configure the many choices on this tab now
or leave them at the default settings and then
select OK.
Figure 11. Bluetooth Configuration Window –
Information Exchange Tab
Step 18 Now choose the Hardware tab. Once you
have established a connection, you will see
the BD Address and other interesting
information about the device.
Figure 12. Bluetooth Configuration Window Hardware Tab
Page 14
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Start Connecting Over The Bluetooth Airwaves – File Transfer
Step 1 Double click on the Bluetooth Neighborhood icon located on your desktop. A Bluetooth Neighborhood
window appears as shown in Figure 13. Double click on the Entire Bluetooth… icon. This will
perform an inquiry and search for other nearby devices.
Figure 13. Bluetooth Neighborhood Window
Step 2 Then, Double click on the Search For Devices
icon. It will find your other bluetooth device
as shown in Figure 14. If you have other
Bluetooth devices in the area, they will be
located and appear on your screen as
Unknown. Only the devices that you have
configured will have a name.
Double click here
Figure 14. Found Configured Device
Note: Because of over-the-air interference and
if you have a lot of devices in the
evaluation area, then you might have to
click on Search for Devices a few times .
Page 15
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 3 On your master device, double click on the
icon named after your slave device as shown
in Figure 15. It will show all profile that the
slave support as shown in Figure 16.
Figure 15. Found Configured Device
Step 4 Double click on the icon Public Folder. It will
connect to the Shared Directory of the slave
device (See the step 17). And show all the files
in the Share Directory.
Figure 15. Explore Serices window
Page 16
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 5 Figure 17 show there are no files in the Share
Directory.
Figure 17. Explore files window
Step 6 Now, you can copy files from the Files Manager
master device.
Figure 18. Windows 2000 Files Manager
Page 17
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 7 Then, Paste this file into Public Folder,
A Copying Window appears as shown in Figure
20.
Figure 19. Paste files to Public Folder
Figure 20. Copying…
Step 8 When the copy is completed, you will see the file
name listed in the Public Folder.
Figure 21. Copy completed window
Page 18
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Connecting Over The Bluetooth Airwaves – Security
Step 1 Go back to the icon tray (lower right-hand side of the screen) and right click on the small Bluetooth
Neighborhood icon. Highlight Configuration on the pull down window.
Step 2 The Bluetooth Configuration window opens as shown in Figure 22. Select the General tab. Under
Security, choose the High option. This will enable encryption. Click OK. (If you choose the Medium
option, encryption will be disabled.)
Figure 22. Bluetooth Configuration Window – Encryption Enabled
Step 3 Send any file(s) in encrypted mode by repeating
Step 2.
Step 4 For additional security, right click on the icon
tray’s small Bluetooth Neighborhood icon
again. On the pull down window, highlight
Security. The window shown in Figure 23
opens with two sections. All of your found
devices will be on the left-hand side.
Figure 23. Bluetooth Security Window
Page 19
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 5 Highlight a device and click on the Execute
Pairing button. Now this is the only device(s)
that can connect to your computer. The user is
asked for a passkey. The Bluetooth Passkey
Request window opens as shown in Figure
24.
Step 6 Click on the OK button after entering the
passkey in the Bluetooth Passkey window.
Figure 24. Bluetooth Passkey Request
Page 20
Step 7 On the other device, the Bluetooth icon on the
icon tray (lower right-hand side of the screen)
will blink. On clicking the icon a Bluetooth
passkey request window pops up requesting
the user to enter passkey. Enter the same
passkey as given on the first device. Click on
OK button.Successfully finding the Available
services on the second device will Be an
indication that we are in connection using
pairing. If there is any Security Error message,
make sure that the passkeys given on both
devices are the same.
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Start Connecting Over The Bluetooth Airwaves –Dial-up Networking Profile
Example 1 : Use the ERICSSON T39mc mobile ( with the Bluetooth module and GPRS service
and provide Dial-up Networking Profile)
Step 1 Execute the BTW program。
Step 2 Before you using this application you must to pair the master device and T39mc,
After pairing successfully at the first time, the PC and T39mc will recognize each other,
Then, you can use the all services of the T39mc without being recognized again。
Step 3 Make pair from T39mc。
T39mc setting :
Extras
5 Synchronization
6 Bluetooth
7 Time
Bluetooth
1 Discoverable
2 Paired devices
3 Discover
Add types
1 All types
2 Headset
3 PC
USI12162
Add to paired
devices?
Paired devices
Add device
Add to paired
1 Phone initiates
2 Phone accepts
Add to paired
Passkey:xxx
In this step you must enter the Passkey : xxx (for wmample: 123) on the T39mc side，and then you will see a
Bluetooth connection request detected message on the PC screen，click the icon
and enter the same
passkey(123) into the column。
Pairing …
Name tag :
USI12162
Figure 25 Bluetooth Passkey Request
Page 21
Enter tag name
Pairing successful
Add device
USI12162
Completed
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 4 After pairing finished, click
can see the icon
and you
Figure 26. Found Configured Device
Step 5 Double click icon
,you can see what are
the services T39mc support, click icon
Figure 27. Explore Serices window
Page 22
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Step 6 Enter the username、password and Dial_up
number, then click Dial.
If it connect successful you see the Message
BluetoothConnection .
Figure 28. Bluetooth Dial_up Window
Step 7 Before you connect to web side, be sure to
set the BluetoothConnection device to be
your default connection.
Now, you can connect to web.
Figure 29. Internet Option Window
Page 23
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
UB2-2111-S User’s Manual
With the Bluetooth Software BTW 1.2.x or above
Technical Support
The identification of the product:
Product Name: UB2-2111-S Bluetooth USB Module
Model Name: UB2-2111-S
Application: Desktop PC, Notebook
Technical Contact:
Universal Scientific Industrial Co., Ltd.
Address: 135, Lane 351, Taiping Rd., Sec. 1, Sec. 1, Tsao Tuen, Nan Tou, Taiwan
Contact Person: Chuei-Tang Wang
Telephone: +886-49-2325876 Ext.1800
Fax: +886-49-2329561
Email:ctwang@ms.usi.com.tw
Website: www.usi.com.tw
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment should
be installed and operated with minimum distance 2.5cm between the radiator and your body. Use
on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the
transmitter and may violate FCC regulations and may void the user's right to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
Two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
Cause undesired operation.
Page 24
135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw
Rev2.0 Oct/29/2002
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables
when connecting to computer or peripheral devices) any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 2.5cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 2.5 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as the 2 conditions above are met, further transmitter testing will not be required. However,
the OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed (for example, digital device emissions, PC peripheral
requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
Obtaining a separate FCC authorization.
End Product Labelling
This transmitter module is authorized only for use in devices where the antenna may be installed such
that 2.5 cm may be maintained between the antenna and users (for example access points, routers,
wireless ASDL modems, and similar equipment). The final end product must be labeled in a visible
area with the following: “ Contains TX FCC ID: IXMUB22111S ”.
Manual Information That Must be Included
The users manual for end users must include the following information in a prominent location “
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for
this transmitter must be installed to provide a separation distance of at least 2.5 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter.”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Creator                         : Microsoft Word - UB2-2111-S User Manual.doc
Create Date                     : 2002:10:29 11:14:45
Title                           : UB2-2111-S User Manual.PDF
Author                          : Administrator
Producer                        : Acrobat PDFWriter 4.05Windows NT ª©
Modify Date                     : 2002:11:05 11:49:47+08:00
Page Count                      : 26

EXIF Metadata provided by EXIF.tools