Universal Scientific UD23011 Bluetooth USB Dongle User Manual BTW Getting Start
Universal Scientific Industrial Co., Ltd. Bluetooth USB Dongle BTW Getting Start
Manual
Page 1 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Trademark Information
BTW is a product of Widcomm Inc.
Windows, Windows 98, Windows NT, Windows Millennium, Windows XP are trademarks of Microsoft
Corporation. Internet Explorer is a product of Microsoft Corporation.
The BLUETOOTH trademarks are owned by Bluetooth SIG and used by USI under license.
T39 handset is a product of Ericsson.
All other trade names mentioned in this document or the other documentation provided with Bluetooth
USB Dongle are trademarkes or registered trademarks of their respective holders.
Page 2 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Table of Contents
Item Page
System Requirement 3
Bluetooth Software Install step by Step 3 -9
Start Connection Over The Bluetooth Airwaves – File Transfer 10-13
Connecting Over The Bluetooth Airwaves – Security 14 - 15
Start Connection Over The Bluetooth Airwaves – Dial Up Networking Profile 16 - 18
Page 3 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
System Requirements
BTW runs under:
- Windows 98 (Second edition)
- Millennium (Windows 98 ME)
- Windows 2000
- Windows XP
During the installation, you need a CD-ROM driver for access to the bundle software.
Note: This Getting Started is a simple guide , for more Users Guide please see the ‘BTW Users
Guide.pdf’ in BTW CD.
Or you can click the Help Topics in the Help Menu of the Tool Bar.
Bluetooth Software Install step by step
Step 1 Insert the Widcomm BTW CD into the PC’s CDROM drive. Installation proceeds automatically.
Since Windows NT does not support USB, the installation of the CD should be done on
systems with Windows ’98 or Windows 2000.
Step 2 An InstallShield box appears to inform you the installation Wizard is being set up. Please wait.
Page 4 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 2. Welcome Window
Note: These images were captured from a
Windows 2000 system. Your images may
look slightly different.
Step 3 A Welcome To The Installation Wizard
window appears as shown in Figure 2.
Select Next to continue the installation
process.
Figure 3. License Agreement Window
Step 4 The license agreement window appears as
shown in Figure 3. If you accept, mark the “I
accept the terms in the license agreement”
option and click on Next. The installation will
proceed. If you do not accept the conditions of
the agreement, the installation process will
terminate.
Page 5 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 4. Device Information Window
Step 5 A Device Information window opens as shown
in
Figure 4. Enter a device name and choose a
device type. These options will not affect the
functionality. The device information is used to
inform the master device what kinds of other
devices are within range to connect to so the
user can identify which device is the one they
need to connect to if there is more than one
device within range. Select the Next Button.
Figure 5. Destination Folder Window
Step 6 A Destination Folder window appears as shown
in Figure 5, which states the default location and
gives you the opportunity to choose an
alternative folder. When the location is
acceptable, select Next.
Page 6 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 6. Ready to Install Window
Step 7 A Ready to Install Program window appears as
shown in Figure 6. Select Install when you are
ready to proceed.
Figure 7. Installing Window
Step 8 An Installing Widcomm Status window appears.
Please be patient, this may take up to 5 minutes.
Step 9 A notification window appears asking you to
restart your system. Select Yes to proceed.
Page 7 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 8. Install Complete Window
Step 10 You will be informed when the installation is
complete. Select Finish. Follow the
instructions thereafter. You may be asked to
restart the computer after the installation
completes. In that case click OK and restart
the computer.
Step 11 A Bluetooth Neighborhood logo has appeared on your desktop and a small Bluetooth icon has
appeared on your icon tray (lower right-hand side of the screen).
Page 8 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 9. Device Manager Window
Step 12 Plug the Bluetooth USB Dangle into you
usb port ,The OS will install the usb Driver
auto.
And you can check it in the My computer -
> Device Manager.
You may now remove the Widcomm CD from
your CD drive.
Step 13 Let’s configure your devices. On your icon tray (lower right-hand side of the screen), right click on
the small Bluetooth Neighborhood icon on your icon tray.
Figure 10. Bluetooth Configuration Window -
General Tab
Step 14 A pull down window appears with two words,
Security (which we will discuss later) and
Configuration. Choose Configuration.
Step 15 A Bluetooth Configuration window appears as
shown in Figure 10. In this document, there are
three tabs-of-interest: General, Information
Exchange, and Hardware. Select the General
tab.
Step 16 Type in a name for your device and choose
either Laptop or Desktop. The security
option’s default is medium; leave that as it is
for now. Select OK.
Page 9 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 11. Bluetooth Configuration Window –
Information Exchange Tab
Step 17 Now choose the Information Exchange tab
as shown in Figure 11. The My Shared
Directory window allows you to determine
where you would like to locate files you want
to share with other devices. The default is
called File Transfer. My Inbox Directory is the
dialogue window that allows you to determine
where you wish to put incoming files.
Configure the many choices on this tab now
or leave them at the default settings and then
select OK.
Figure 12. Bluetooth Configuration Window -
Hardware Tab
Step 18 Now choose the Hardware tab. Once you
have established a connection, you will see
the BD Address and other interesting
information about the device.
Page 10 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Start Connecting Over The Bluetooth Airwaves – File Transfer
Step 1 Double click on the Bluetooth Neighborhood icon located on your desktop. A Bluetooth Neighborhood
window appears as shown in Figure 13. Double click on the Entire Bluetooth… icon. This will
perform an inquiry and search for other nearby devices.
Figure 13. Bluetooth Neighborhood Window
Figure 14. Found Configured Device
Note: Because of over-the-air interference and
if you have a lot of devices in the
evaluation area, then you might have to
click on Search for Devices a few times .
Step 2 Then, Double click on the Search For Devices
icon. It will find your other bluetooth device
as shown in Figure 14. If you have other
Bluetooth devices in the area, they will be
located and appear on your screen as
Unknown. Only the devices that you have
configured will have a name.
Double click here
Page 11 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 15. Found Configured Device
Step 3 On your master device, double click on the
icon named after your slave device as shown
in Figure 15. It will show all profile that the
slave support as shown in Figure 16.
Figure 15. Explore Serices window
Step 4 Double click on the icon Public Folder. It will
connect to the Shared Directory of the slave
device (See the step 17). And show all the files
in the Share Directory.
Page 12 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 17. Explore files window
Step 5 Figure 17 show there are no files in the Share
Directory.
Figure 18. Windows 2000 Files Manager
Step 6 Now, you can copy files from the Files Manager
master device.
Page 13 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 19. Paste files to Public Folder
Step 7 Then, Paste this file into Public Folder,
A Copying Window appears as shown in Figure
20.
Figure 21. Copy completed window
Step 8 When the copy is completed, you will see the
file
name listed in the Public Folder.
Figure 20. Copying…
Page 14 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Connecting Over The Bluetooth Airwaves – Security
Step 1 Go back to the icon tray (lower right-hand side of the screen) and right click on the small Bluetooth
Neighborhood icon. Highlight Configuration on the pull down window.
Step 2 The Bluetooth Configuration window opens as shown in Figure 22. Select the General tab. Under
Security, choose the High option. This will enable encryption. Click OK. (If you choose the Medium
option, encryption will be disabled.)
Figure 22. Bluetooth Configuration Window – Encryption Enabled
Figure 23. Bluetooth Security Window
Step 3 Send any file(s) in encrypted mode by repeating
Step 2.
Step 4 For additional security, right click on the icon
tray’s small Bluetooth Neighborhood icon
again. On the pull down window, highlight
Security. The window shown in Figure 23
opens with two sections. All of your found
devices will be on the left-hand side.
Page 15 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 24. Bluetooth Passkey Request
Step 5 Highlight a device and click on the Execute
Pairing button. Now this is the only device(s)
that can connect to your computer. The user is
asked for a passkey. The Bluetooth Passkey
Request window opens as shown in Figure
24.
Step 6 Click on the OK button after entering the
passkey in the Bluetooth Passkey window.
Step 7 On the other device, the Bluetooth icon on the
icon tray (lower right-hand side of the screen)
will blink. On clicking the icon a Bluetooth
passkey request window pops up requesting
the user to enter passkey. Enter the same
passkey as given on the first device. Click on
OK button.Successfully finding the Available
services on the second device will Be an
indication that we are in connection using
pairing. If there is any Security Error
message,
make sure that the passkeys given on both
devices are the same.
Page 16 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Start Connecting Over The Bluetooth Airwaves –Dial-up Networking Profile
Example 1 : Use the ERICSSON T39mc mobile ( with the Bluetooth module and GPRS service
and provide Dial-up Networking Profile)
Step 1 Plug on the Bluetooth USB Dangle, Execute the BTW program。
Step 2 Before you using this application you must to pair the master device and T39mc,
After pairing successfully at the first time, the PC and T39mc will recognize each other,
Then, you can use the all services of the T39mc without being recognized again。
Step 3 Make pair from T39mc。
T39mc setting :
Figure 25 Bluetooth Passkey Request
Extras
5 Synchronization
6 Bluetooth
7 Time
Bluetooth
1 Discoverable
2 Paired devices
3 Discover
Paired devices
Add device
Add to paired
1 Phone initiates
2 Phone accepts
Add types
1 All types
2 Headset
3 PC
Add to paired
Passkey:xxx
USI12162
Add to paired
devices?
Name tag :
USI12162
Pairing …
Pairing successful
Add device
USI12162
In this step you must enter the Passkey : xxx (for wmample: 123) on the T39mc side，and then you will see a
Bluetooth connection request detected message on the PC screen，click the icon and enter the same
passkey(123) into the column。
Enter tag name Completed
Page 17 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 26. Found Configured Device
Step 4 After pairing finished, click and you
can see the icon .
Figure 27. Explore Serices window
Step 5 Double click icon ,you can see what are
the services T39mc support, click icon
.
Page 18 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Figure 28. Bluetooth Dial_up Window
Step 6 Enter the username、password and Dial_up
number, then click Dial.
If it connect successful you see the Message
BluetoothConnection .
Figure 29. Internet Option Window
Step 7 Before you connect to web side, be sure to
set the BluetoothConnection device to be
your default connection.
Now, you can connect to web.
Page 19 135, Lane 351, Taiping Road, Sec . 1, Nan-Tou , Taiwan; (049)2325876; www.usi.com.tw Rev 1.29_30Aug02
Getting Started
With the Bluetooth Software BTW 1.2.29 and Bluetooth USB Dongle
Technical Support
The identification of the product:
Product Name: UD-23011 Bluetooth USB Dongle
Model Name: UD-23011
Application: Desktop PC, Notebook
Technical Contact:
Universal Scientific Industrial Co., Ltd.
Address: 135, Lane 351, Taiping Rd., Sec. 1, Sec. 1, Tsao Tuen, Nan Tou, Taiwan
Contact Person: Chuei-Tang Wang
Telephone: +886-49-2325876 Ext.1800
Fax: +886-49-2329561
Email:ctwang@ms.usi.com.tw
Technical Contact in the US :
Address : 685A Jarvis Drive, Morgan Hill, CA 95037, USA
Telephone : +1-408-776-1966
Fax : +1-408-778-5509
Website: www.usi.com.tw
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment should
be installed and operated with minimum distance 20cm between the radiator and your body. Use
on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the
transmitter and may violate FCC regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
Two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
Cause undesired operation.