Universal Scientific USGAT02 802.11g USB WIRELESS ADAPTER User Manual USB Client

Download:
Mirror Download [FCC.gov]
Document ID	823040
Application ID	tfpUkHtFna0SV/5kVY/pWw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.41kB (292632 bits)
Date Submitted	2007-07-30 00:00:00
Date Available	2007-07-31 00:00:00
Creation Date	2007-07-27 18:36:21
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-07-27 18:59:41
Document Title	USB Client User Manual
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	jasont

802.11 b/g USB Adapter
Installation Guide
1. Before You Start
Please check PCI Adapter package content:
•
•
•
USB Adapter
1.5M USB cable
CD-ROM containing software driver and documentation
If any of the items appear to be damaged or missing, please contact
your supplier. This device is compliance with FCC, IC and CE rules.
1. FCC
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with minimum distance 20cm between the radiator and
your body. Use on the supplied antenna. Unauthorized antenna, modification, or
attachments could damage the transmitter and may violate FCC regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. IC
CAUTION: This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. To maintain compliance with IC RF exposure
compliance requirements, please follow operation instruction as documented in this
manual.
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject
to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause
undesired operation of the device
3. CE
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
The following test methods have been applied in order to prove presumption of conformity
with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2001
EN 50392: 2004
EN 300 328 V1.6.1 (2004-11)
EN 301 489-17 V1.2.1 (2002-08) and EN 301 489-1 V1.5.1 (2004-11)
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in
all EU member states and EFTA countries, except in France and Italy where restrictive
use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in
order to obtain authorization to use the device for setting up outdoor radio links and/or for
supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some
areas the RF output power may be limited to 10 mW EIRP in the frequency range of
2454 – 2483.5 MHz. For detailed information the end-user should contact the national
spectrum authority in France.
Hereby, USI declares that this USB Adapter is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
1.1 What you need to Begin
•
•
•
PC with an available USB port
PC with Windows Vista, XP or 2000
An Ethernet-based cable or DSL modem or other WAN
connection for Internet access
1.2 Product Features
•
•
•
Complies with IEEE 802.11g 54 Mbps wireless radio
standard
100mW power output
Supports Windows Vista, XP, or 2000
1.3 Safety Features
•
•
•
•
WPA (Wi-Fi Protected Access)
WPA2 (Wi-Fi Protected Access)
802.1x (RADIUS) authentication
64/128-bit WEP (Wired Equivalent Privacy) data encryption
2. Software Installation
During the Installation procedure, you may be prompted for your
Windows Operating system CD-ROM. Make sure you have it
available in case you need it.
Be sure to find out what letter your CD-ROM drive uses before you
begin installing your new product. You will need to know this to
properly install your software.
Step one: Install the USB Adapter and drivers
A. Insert the Installation CD-ROM into your CD-ROM drive. The
Installation CD Graphical User Interface (GUI) will appear on your
screen.
Note: If your CD-ROM does not automatically launch, click
Windows Start, Run, type D:\setup (if your CD-ROM drive uses a
different letter, type that letter in place of “D”), and click OK.
B. Select your product and driver then click Installation.
C. Follow the on-screen instructions.
Note: You will need to install this Installation CD-ROM on all the
PCs on which you plan to install USB Adapters.
D. When prompted, locate an available USB port and fully insert the
USB Adapter.
E. When prompted, click Restart to restart your computer.
Step Two: Connect to a Wireless Network
A.
Please select “View Available Wireless Networks” from taskbar
and click “enter”. You will need to wait while the USB Adapter
looks for available wireless networks.
B.
A list of available wireless networks will appear on the “Connect
to Existing Router or Access Point” screen.
C.
Select the appropriate wireless network and click “connect”. The
USB Adapter will be connected to the wireless network you select.
Note: If the wireless network device does not appear in the list, you
can enter the name of the network under Network name.
D. Configuration information for that network will appear. If the
network specified is not secure, the “Installation Complete”
screen will appear. Click Finish. If you have specific security
settings enabled on the wireless network to which you will be
connecting, such as WEP or WPA2, you will need to select your
security type and click Next. Enter the appropriate security
information on the next screen and click Next.
E.
Click Finish. If prompted when the setup is complete, restart your
computer.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0 (Windows)
Company                         : USI
Source Modified                 : D:20070725093616
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2007:07:27 18:59:41+08:00
Create Date                     : 2007:07:27 18:36:21+08:00
Metadata Date                   : 2007:07:27 18:59:41+08:00
Document ID                     : uuid:4a1d0808-9010-49f7-97d7-90b45c90ff22
Instance ID                     : uuid:d4079898-d3e3-4c9e-a744-1eb08a25e08e
Version ID                      : 2
Format                          : application/pdf
Title                           : USB Client User Manual
Creator                         : jasont
Subject                         : 
Headline                        : 
Page Count                      : 10
Page Layout                     : OneColumn
Author                          : jasont

EXIF Metadata provided by EXIF.tools