Unixtar Technology PCUH411 Four Port USB Hub User Manual

Download:
Mirror Download [FCC.gov]
Document ID	94946
Application ID	2vtkxPbqo04ylIxfn4gnxQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.61kB (757648 bits)
Date Submitted	2000-04-07 00:00:00
Date Available	2000-04-13 00:00:00
Creation Date	2000-04-07 01:04:11
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2000-04-07 10:38:21
Document Title	穨Untitled
Document Creator	穨全能影像經理 - Inbox
Document Author:	穨ivy

EXHIBIT C
User Manual
'4.F>'5E{aé;5ch§5ie' 055 Has
_ gun—14! |
,/
Owner's manual
Bedienungsanleitung
Mode d'emplbi
lstruzioni per I ’uso
Gebruiksaanwijzing
lnstrucciones de manejo
PHILIPS
FCC Statement
FCC Class B Radio Frequency Interference
Statement
Note:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part I5 of
FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guar’ant'eé‘that interference will not occur in a particular
installation.llfvthis equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
I. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Hub-4CIipOn- l ,doc I
4. Consult the dealer or an experienced radio/television
technician for help.
Note 1:
The changes or modifications not expressly approved by the
party responsible for compliance could void the user’s é
authority to operate the equipment. ‘
Note 2:
Shielded interface cables, if any, must be used in order to
comply with emission limits. 1
CE Declaration of conformity
The USB Hub is in conformity with EUROPEAN
STANDARD EN 55022/Al Class B, and EN 50082-l (IEC
80I-2,IEC 80I-3,lEC 80l-4).
Hub-4Clip0n- l .doc II
PHILIPS
Table of Contents
1. About this product ......................... 1
LI. Package Contents .......................................... l
1.2. Features ..................................................... I
I3. Identification ............................. i ................... I
2. Installation .................................... 2
2.i. Placement ........................... ....................... 2
2.27.77Adaptation................., ................................ 2
2.3. Power Connection ......................................... 3
2.4. USB Connection .......................................... 4
2.5. Setup ......................................................... 4
3. Trouble Shooting ............................ 5
Hub-4Clip0n- I do: In
@ PHILIPS
1. About this product
1.1 Package Contents
Each package should include the following parts :
' l USB 4-port Clip-On HUB ‘ I USB cable
' l Switching AC Adapter ‘ l Owner’s manual
1 .2 Features
Fulfill the-USB-IF Specification Revision LI and HID
Class Definition Rev. I.0.
Support up to I27 USB devices simultaneously.
Stand-alone or clip-on to Philips I999/2000 CRT
monitor range. ‘
Support for realtime dynamic insertion and removal.
I Upstreamportand 4 Downstream ports.
Over current protection on all downstream ports.
Self-powered by using the supplied AC Adapter or
Bus-powered through USB bus.
LJLJCID DD D
1 .3 Identification
I. Power LED: Red light is lit
when power is supplied.
2. LEDs: Green light is lit for
each of the ports when they
are connected and active.
3. Down Stream Ports:4 USB , ,
A-type receptacles on both sides connect to USB
devices.
Hub-4CIipOn— I .doc I
4. Up Stream Port
I USB B-type receptacle to ,
connect to the PC.
, 5. Power Socket
For the supplied AC Adapter jack
to connect to.
2. Installation
2.1 Placement
Theplacement of this hub can be: either clipping on the
. a pedestal or multimedia base of the Philips l999/2000
. CRT monitor range r standing aloneto the PC.
2.2 Adaptation
This Hub consists of two parts: functional and aesthetic.
The aesthetic element is a removable covenTo remove
the cover, simply by pulling it apart from the main body,
the Hub can be attached to the base or pedestal of any
the new products in l999/2000 CRT monitor range.
I? For Philips pedestals:
The new attachable USB Hub can be rotated to any
position around the monitor’s base (see ‘graph 3 & 4).
This accommodates users who prefer to connect USB
peripherals like keyboards, joysticks and mouses
conveniently in the front of their monitor, as well as
those who opt for Hub connections at the rear of the
monitor. If requirements changed, the hub position can
be repositioned at any time to concur changing needs.
if? For Philips Multimedia Base: ‘ z:
A slot for this hub to inStaII in can be found in the back .
of the Multimedia Base. Simply insert the hUb Straight '
into‘ the slot until a click sOund is heard.The hub can’t
be rotated nor repositioned with Multimedia Base;
However, it retains the advantage of minimal space
requirement.
2.3 Power connection
3 It is recommended that the AC, adapter be plugged
into the electrical outlet before the hub.
3 It is recommended that the AC adapter is used at all
time for high-speed devices and multiple devices may f
cause a power shortage in the hub.
3 It is recommended that the AC adapter be used
whenever multiple hubs in a stacking configuration.
II Do not remove the AC adapter while the hub is
working.
Hub-4CIipOn-I.doc 3
PHILIPS
2.4 USB connection
|- USB devices
This hub can be connected
or disconnected to your um. ,
PC when the computers
up and running programs,
by using any USB port on
your computer.
This product allows your
computer to interface with mg”,
various USB devices.
2.-A & B type connector
|n*sert‘A_c9nnecth into . ,
the down stream port on 51
the PC or this hub.
Insert B connector into
the up stream port of this
hub or other USB devices.
Make sure that those all
the way into the socket
and is firmly connected.
«ma
Emu Hector
=Eh «film
2»
' s
“MP“ Ame.”
Device (Mme. Joystick. amepsg. Keyboard
015m Camera. Scanner)
2.5 Setup
Cl When connecting this hub
for the first time, a message
of “Searching for unknown
hardware device, searching
software for installation”
will appear.
Cl Your computer will then
start up the Device Driver
Wizard, and install the hub.
El Once the setup has finished
the installation, you can
connect USB devices to it.
4. Trouble Shooting
Please refer to the following list of common problems -;
encountered and possible causes Please contact the vendor
ou nurchased from for an nroblem not listed below.
0 One or all of the
connections are not firmly in '
the place and properly “
connected.
Hub cannot be recognized.
0 Displays a“!” mark on the Hub
item in Device Manager.
0 Something other than
“Common USB Hub” is showed
in the Device Man—ager.
Red Power LED is not lit
0 The AC adapter is not
properly connected. 4
0 The connection is not firmly .
in place. '
o The downstream USB devices.
is malfunctioning.
0 A particular USB device
does not support multiple
devices. Please consult that
device’s o-eratin manual.
0 Green LED light is not lit when
port is connected to device.
0 Downstream USB’device does
not function p_roperly.
o A malfunction occurs when
multiple downstream USB
devices are connected.
HubAClipOn- l .doc 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : .穨.全能影像經理 - Inbox
Create Date                     : 2000:04:07 01:04:11
Title                           : .穨.Untitled
Author                          : .穨.ivy
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2000:04:07 10:38:21+08:00
Page Count                      : 10

EXIF Metadata provided by EXIF.tools