Unixtar Technology UT-20NC01 USB 2.0 PCI Card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	160087
Application ID	q/QLoFPW+NBm39Lo8lDHWw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.38kB (392277 bits)
Date Submitted	2001-07-17 00:00:00
Date Available	2001-07-17 00:00:00
Creation Date	2001-07-17 13:19:30
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-07-17 13:19:46
Document Title	User Manual

USB 2.0 PCI Card
Introduction
This 5 Port USB2.0 PCI Card is compliant with latest USB Spec Revision 2.0, i.e.
support high-speed (480 Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) data
transaction rate. It is fully backward compatible with previous USB 1.1 products. You
will enjoy the Hi-Speed that USB2.0 technology provides, particularly when you are
operating the devices, which need mass data transmission, such as DV Camcorder,
Digital camera…etc
Features
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Compliant with USB Spec Revision 2.0
Compliant with Open Host Controller Interface Spec for USB Revision 1.0a
All 5 downstream ports can handle high-speed (480 Mbps), full-speed (12 Mbps)
and low-speed (1.5 Mbps) transaction
32-bits 33 MHz host interface compliant to PCI Spec release 2.2
Support PCI-Bus Power Management Interface Spec release 1.1
System Requirements
Ÿ
Ÿ
Ÿ
Use with IBM PC compatible
Recommended CPU speed at Pentium III or AMD-K7, RAM 128MB
Operation System of MS Windows 2000 Professional and Windows XP*
*Microsoft will release Windows XP Operation System to support USB 2.0 PCI Card
in foreseeable future.
Hardware Installation under Windows 2000 Professional
1.
2.
3.
4.
5.
6.
7.
Turn the power off on your computer and disconnect the power cable
Open the computer case
Select an open PCI slot. Remove the cover plate for that slot.
Push the card into the slot
Attach the card’s bracket to the back of the computer with the screw to fix
Close the computer case
Connect the power cable and turn the power on
Page 1 of 4
8. Windows 2000 Professional will detect an new USB device and run Add New
Hardware Wizard, please insert alpha Driver (provided by Microsoft for
USB-IF)
9. Follow the instructions and at final stage, push Finish button to complete
installation.
Device Manager - Windows 2000 Professional
Once USB 2.0 PCI Card is being installed in the computer, , you will see the USB 2.0
PCI Card displaying in Device Manager of Windows 2000 Professional as follows
Hardware Installation under Windows XP (Beta 2)
1. Same Procedures as above installation of Windows 2000 Professional
2. At procedures 8, please insert alpha Driver for Windows XP
3. Follow the instructions and at final stage, push Finish button to complete
installation.
Page 2 of 4
Device Manager - Windows XP (Beta2)
Once USB 2.0 PCI Card is being installed in the computer, you will see the USB 2.0
PCI Card displaying in Device Manager of Windows XP (beta2) as follows
Packing List
Ÿ
Ÿ
The USB 2.0 PCI Card
This Manual
Update: July 9, 2001
Page 3 of 4


 

                            
           ! 
        
                           ! 

                 
            
           
    !  "                  
       #                  
                
               $
!
 %      !
&!
'            !
(!
                  
  !
)!
     *   %
+    !

      
        
 

  
 
 
 


 
  
  
 
 

 
  
  
    
  
  
  
 
 
      

 
  
 


 
 
    
 
 
 
 




---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:07:17 13:19:46-07:00
Create Date                     : 2001:07:17 13:19:30-07:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 4

EXIF Metadata provided by EXIF.tools