Unixtar Technology UT-20NP02 USB 2.0 Card Bus User Manual USB 2 0 CardBus UPVUCC
Unixtar Technology USB 2.0 Card Bus USB 2 0 CardBus UPVUCC
User Manual
Warning: Normally internal power will not supply sufficient power for λ Compliant with USB Spec Revision 2.0 devices which require larger power consumption (USB 2.0 λ Compliant with Open Host Controller Interface Spec for USB Revision 1.0a peripherals for instant), to avoid any possible operational failure of devices, it is recommended USB Charger cable is to λ full-speed (12 Mbps) and low-speed (1.5 Mbps) transaction rate be linked, in case, the devices still not function properly, USB 2.0 Hi-speed 2 Port CardBus please replace it with external AC Adapter. External AC All 2 downstream ports can handle high-speed (480 Mbps), λ All 2 downstream ports are shared by OHCI and EHCI Host Controller core Adapter is to be purchased separately λ Plug and Play capability λ USB Charger Cable latest USB Spec Revision 2.0, i.e. support high-speed (480 λ Use with IBM PC compatible Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) data λ Use with Mac PowerBook compatible transaction rate. It is fully backward compatible with λ Recommended CPU speed at Pentium III or AMD-K7 or higher, User’s Manual This USB2.0 Hi-Speed 2 port CardBus is compliant with RAM 128MB previous USB 1.1 products. You will enjoy the Hi-Speed that USB2.0 technology provides, particularly when you are λ Recommended CPU is G3 300, RAM 128MB operating the devices, which need mass data transaction, λ Windows 98, 98SE, ME, Windows 2000 and Windows XP* such as DV Camcorder, Digital camera …etc λ Mac OS X 10.1(Support USB 2.0 Driver) 1. USB 2.0 Hi-Speed 2 port CardBus 2. Driver for Windows/Mac in CD-ROM λ Mac OS 9.1(Only support USB 1.1) 3. USB Charger Cable x1 λ Available Type II CardBus-enabled slot. 4. USB 2.0 cable x1 λ Available USB port for computer. 5. User’s Manual 1. Turn on your computer and insert the Driver CD. And 1. Turn on your computer and insert the Driver CD. And open desktop will show the USB 2.0 Hi-speed PCI Card Window the Driver CD, Double-click the (or click CD-ROM:\ setup.exe). Please click [Install USB 2.0 2. After s etup is completed, click [Restart] button. driver] to install USB 2.0 driver. 3. After computer is restarted completed, connect USB 2. After s etup is completed, select [Yes, I want to restart my computer now.], and click [Close] button, computer will restart automatically. icon Charger Cable to the USB port of your computer or plug 4. Connect USB Charger Cable or external AC Adapter power EHCI and OHCI compatible Transaction Speed Support high speed (480 Mbps) and low spee d(1.5 Mbps) available Type II CardBus-enabled slot. 6. Verify that the card is seen by your computer by clicking Apple System Profiler. Then, click the Devices and 5. Push firmly unit USB2.0 Hi-Speed 2 port CardBus clicks into Meets USB 2.0 specs external AC Adapter into the power socket. 5. Push firmly unit USB2.0 Hi-Speed 2 port CardBus clicks into cord to the USB2.0 Hi-Speed 2 port CardBus jack. Standards Compliance and full speed (12 Mbps) cord to the USB2.0 Hi-Speed 2 port CardBus jack. external AC Adapter into the power socket. 2 USB T ype- A ports Charger Cable to the USB port of your computer or plug 4. Connect USB Charger Cable or external AC Adapter power 3. After computer is restarted completely, connect USB Interface Volumes tab. Operating temperature 0 to 70 Operating humidity 5% to 90% (non-condensing) Dimension 114.0 mm (L) x 53.8 mm (W) x 14.25 mm (H) Weight 40 gram External AC adapter Index Input: 100-120V~0.5A MAX (Option) 50-60Hz, Output: +5V / 1.2A Limited Warranty One year available Type II CardBus-enabled slot of your computer. 6. Turn on your computer, the Windows will detect a new USB device and run Add New Hardware Wizard, NEC PCI to NOTE: 1. If you want to update the driver, please visit USB Enhanced Host Controller, USB 2.0 Root Hub http://www.orangeware.com/usb2oem.html and read the Device , and NEC PCI to USB Open Host Controller. ReadMe.doc file before installation. 2. Mac OS 9.x only support USB 1.1, no support USB 2.0 INFORMATION TO USER: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. (If the Shielded Interface cable(s) was used during the final tests, add the following statement:) Shielded Interface Cable has to be used to ensure product compliance CAUTION:Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 2002:07:03 07:54:12Z Modify Date : 2002:07:03 07:58:36+08:00 Page Count : 3 Creation Date : 2002:07:03 07:54:12Z Author : sarah Producer : Acrobat PDFWriter 5.0 for Windows Mod Date : 2002:07:03 07:58:36+08:00 Metadata Date : 2002:07:03 07:58:36+08:00 Title : USB 2.0 CardBus-UPVUCC.doc Creator : sarahEXIF Metadata provided by EXIF.tools