VALEO Telematik und Akustik CKIII-HFP2 CKIII-HFP2 User Manual FCC Statement CKIII HFP x

Download:
Mirror Download [FCC.gov]
Document ID	705635
Application ID	yhPs1oVDdOlk3yA44YAeww==
Document Description	Manual Statements
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.8kB (85061 bits)
Date Submitted	2006-09-18 00:00:00
Date Available	2006-09-18 00:00:00
Creation Date	2006-01-11 14:28:29
Producing Software	AFPL Ghostscript 8.14
Document Lastmod	2006-09-18 15:11:52
Document Title	Microsoft Word - FCC Statement CKIII-HFP-x.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	FRO

RF Exposure statement:
The antenna shown in this filing must not
be co-located or operated in
conjunction with any other antenna or
transmitter.
integrators need no SAR evaluation. The
max source-based time-averaged output
of 0.0005 W is below the low threshold of
24mW for d < 1.5 cm.
Statement according to FCC part 15.21:
Modifications not expressly approved by
this company could void the user's
authority to operate the equipment.
Statement according to FCC part 15.105:
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
-1-
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet
on a circuit different from that to which
the receiver isconnected.
- Consult the dealer or an experienced
radio/TV technician for help.
-2-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:96ff173a-7a34-413c-bec7-afb98a0414e5
Producer                        : AFPL Ghostscript 8.14
Modify Date                     : 2006:09:18 15:11:52+02:00
Create Date                     : 2006:01:11 14:28:29Z
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2006:09:18 15:11:52+02:00
Document ID                     : uuid:3c29aca7-0bbe-4504-b645-ee3f3784f594
Format                          : application/pdf
Title                           : Microsoft Word - FCC Statement CKIII-HFP-x.doc
Creator                         : FRO
Author                          : FRO

EXIF Metadata provided by EXIF.tools