VALEO Telematik und Akustik CSM3-AE-US Car Sharing external module User Manual Statements

Peiker acustic GmbH & Co. KG Car Sharing external module Statements

User Manual

page 1 peiker acustic GmbH & Co. KG, Max-Planck-Straße 28-32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897 phG: peiker Verwaltungs GmbH, Amtsgericht Bad Homburg HRB 1369 Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Reinhard Kromer-von Baerle, Mathias Köhler Vorsitzender des Aufsichtsrates: Dr. Helmut Rothenberger Ein Unternehmen der peiker Firmengruppe Statement for User Manual CSM 3.0 Car Sharing Module 3.0 Rev. 1.1 Release PEIKER acustic Confidential and Proprietary Name of model: Description Internal peiker product ID BMW CSM 3.0 ECE main unit, EU variant 2515-057-001-51 BMW CSM 3.0 US main unit, US variant 2515-057-101-51 BMW CSM 3.0 AE external unit 2708-041-001-00 Trademark peiker acustic GmbH & Co. KG Brand BMW Status: Release Revision: 1.1 Date: 16.01.2015
page 2 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. 1 Change documentation Date Revision Name Changes / Comment 11.11.2014 Rev 1.0 M. Fleckenstein Initial version 16.01.2015 Rev 1.1 M. Fleckenstein Updated 4.2, removed reference to 15.105(a)
page 3 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. 1 Change documentation ..................................................................................................... 2 2 Introduction ..................................................................................................................... 4 2.1. Scope ............................................................................................................................... 4 2.1.1. Purpose of the document ............................................................................................. 4 2.1.2. General information ..................................................................................................... 4 2.1.3. Contact information ..................................................................................................... 4 3 Antenna installation ......................................................................................................... 5 4 Warning Statements ......................................................................................................... 6 4.1. Europe .............................................................................................................................. 6 4.2. US /Canada ....................................................................................................................... 6
page 4 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. 2 Introduction 2.1. Scope 2.1.1. Purpose of the document The Car Sharing Module (CSM) 3.0 is manufactured by peiker acustic GmbH & Co. KG (grantee) and sold as an OEM product. According to the US Code of Federal Regulations (47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc.), the grantee must ensure the end-user has the applicable and appropriate operating instructions for the device. In the case of this product the grantee must notify the OEM to notify the end-user. peiker acustic GmbH & Co. KG will supply this document to the reseller or distributor to inform him what must be included in the end user’s manual for the commercial product and which installations guidelines for the antenna are applicable. 2.1.2. General information The CSM is assembled in the car after production by specially trained engineers. There are no other distribution channels except spare part replacement within car service. Please be advised that this product will need special trained professionals in configuring and installing the product. The product will be distributed through controlled distribution channel which has special trained professionals to install this product and will not be sold directly to the general public through retail stores. The software application using the installed CSM module is up to the car sharing provider. It is also the responsibility of the car sharing provider to create an end user manual for the installed application. 2.1.3. Contact information peiker acustic GmbH & Co. KG Max-Planck-Strasse 32 D-61381 Friedrichsdorf Germany http://www.peiker.de info@peiker.de
page 5 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. 3 Antenna installation To comply with the RF exposure requirements for 2G/3G cellular radio of the FCC following requirements have to be fulfilled: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device is to be used in mobile or fixed applications only. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 4.91 dBi at 850 MHz & 900 MHz 9.58 dBi at 1800 MHz to 2100 MH for satisfying RF exposure compliance. It must be ensured by the OEM that the end user has no manual or instructions to remove or install the RF unit of the device.
page 6 The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings. 4 Warning Statements The following certification markings and hints should be printed in the end user’s manual: 4.1. Europe This device must be supplied by a limited power source according to EN 60950-1. The clearance and protected creepage distances required by the end product must be withheld when the module is installed. The cooling of the end product shall not negatively be influenced by the installation of the module. 4.2. US /Canada This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by peiker acustic GmbH & Co. KG could void the user's authority to operate the equipment.

Navigation menu