VANKE LOUDSPEAKER C1000 Bluetooth 2.1 Stereo Component Speaker System User Manual M686B Manual GB
SHENZHEN VANKE LOUDSPEAKER PRODUCTS CO., LTD Bluetooth 2.1 Stereo Component Speaker System M686B Manual GB
User Manual
SM
BluetoothSoundbarSystem
ComprehensiveOwner’sManual
The lightning flash with arrowhead within
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and safety
instructions in the literature
accompanying the appliance.
CAUTION: TO PREVENT THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN
THIS PRODUCT. NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
an equilateral triangle is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be a risk of electric
shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
READ MANUAL
- Read all the safety and operating instructions before
the product is operated.
RETAIN MANUAL
- This manual should be retained for future reference.
HEED WARNINGS
- All warnings on the product and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
- All operating and use instructions should
be followed.
CLEANING
- The product should be cleaned only with a polishing cloth
or a soft dry cloth. Never use volatile liquids since they may damage the
product.
WATER AND MOISTURE
- Do not use this product near water such as
near a bathtub, kitchen sink, in a wet basement; or near a swimming
pool, etc.
OBJECT OR LIQUID ENTRY
- Do not insert any kind of object into this
product through any opening as they may make contact with electrical
points and result in a fire or electric shock. Avoid spilling any kind of liquid
on the product.
VENTILATION
- Openings in the cabinet are provided for ventilation and
to protect the product from overheating, and these openings must not be
blocked or covered.
HEAT
- The product should be placed away from sources of heat such
as radiators, stoves, or other products that produce heat. Leave a
comfortable gap between this product and all other electronics in your
Home Theater system.
LOCATION
– This product should be installed in a stable location.
POWER-CORD PROTECTION
- Power-supply cords should not be
stepped on or pinched by items placed upon or against them. Pay
particular attention to cords at plugs and the point where they exit from
the product.
OVERLOADING
- Do not overload wall outlets, extension cords, or
power strips as this can result in a risk of fire or electric shock.
POWER SOURCES
- This product should be operated only from the
type of power source indicated on the label. If you are not sure of the type
of power supply to your home consult your local power company.
NONUSE PERIODS
– The power cord should be unplugged from the
outlet when left un-used for a long period of time.
LIGHTNING
- For extra protection during a lightning storm or when the
product is left unattended and unused for long periods of time, unplug the
power cord. This will prevent damage due to lightning and power surges.
SERVICING
- Do not attempt to service this product yourself as opening
the product may expose you to electric shock, or the product may be
damaged. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE — Unplug this product from the
wall outlet and contact a qualified service personnel under the following
conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally following the instructions in
this manual.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance.
CAUTION – TO PREVENT ELECTRIC SHOCK DO NOT PLUG A
CABLE INTO A WALL OUTLET, EXTENSION CORD, OR OTHER
RECEPTICLE UNLESS THE METAL BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution! Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
We appreciate your choosing SYLVANIA Sound bar for use in your home. These unique sound bar will
provide you with powerful and satisfying sound from an ultra stylish & compact package. Please read
this manual completely to ensure the best possible performance from your system.
Panel Description
BT: The Indicator for bluetooth input status. Frequent blinks of the LED indicate a failure of the communication, while infrequent
ones indicates a successful communication
IR： The remote control signal receiver
AUX1/2: The input signal indicator. The indicator is green when the signals are being input into AUX1, red into AUX2 and orange( the result
from
the simultaneous glows of the green and red LEDs) for standby.
Description of the terminals at the back
1: Power switch
1
2
3 4
2：DC 12V 1.5A input jack
3: Ventilation holesTREBLE-/TREBLE+: Treble volume control buttons
Remote Control Description
ST-BY： Standby switch button
INPUT： Input signal select button。AUX1→AUX2→BT to toggle through choices
MUTE： Mute Switch Button
BASS-/BASS+: Bass volume control buttons
VOL-/VOL+: Soundbar volume control buttons
TREBLE-/TREBLE+: Treble volume control buttons
RESET： Volume Reset Button
： Bluetooth input control button
： Bluetooth input control play / pause button
： The Bluetooth input when under a key of the control device
MOVIE/MUSIC/TV: MOVIE/MUSIC/TV Sound Mode options
Installation Instructions
1， Please refer to the back of the soundbar Wall mounting spacing (400mm); fixed screw holes must be placed in proper position on the wall.
2. Faster screws in the correct positioning holes, thereby installing the plastic cradle.
3. Soundbar fastens directly to the plastic bracket as shown below
Problem and Solutions
1. The power light is on when power on, but no sound.
Re：Please confirm the color of the light on, If light is orange, the sound bar in standby state, please press the standby button to power on in the
control.
2. Light display normal, but no sound.
Re: switching the sound modes to confirm the sound mode is corresponding with the indicator light, AUX1 is green, AUX2 is red.
Sound bar Feature
1. 2.0 channel soundbar with bluetooth
2. Soundbar materials: Plastic
3. Total Power output: 20W
4. RCA input x 2;
5. Support Movie, TV ,Music sound modes.
6. Stylish modern thin design to save space
7. Connect TV, DVB, DVD, iPad, iPhone and other exterior media source.
Specifications,
Speakers: Full range speakers 50mm *4pcs
Output sound press: 88db
Frequency response: 45~20KHz
remote control system: infrared
Adaptor input: AC100V-AC240V 50Hz/60Hz 0.4A Max
Power output: 12V,1.5A
standby power : < 0.5W
Sound bar size: L686*W75*H62mm