VANKE LOUDSPEAKER E1300B SoundBar User Manual
SHENZHEN VANKE LOUDSPEAKER PRODUCTS CO., LTD SoundBar
User Manual
![](/img.php?id=3363978&img=bg1.png)
DETACHABLE 2.1 Channel Bluetooth
Soundbar
Owner's Manual
![](/img.php?id=3363978&img=bg2.png)
oth, ensure you are close
PROSCAN DETACHABLE 2.1 Channel Bluetooth Soundbar
Immerse yourself with the BluetPROSCAN
come alive in your home. The BluetoothPROSCAN soundbar will provide you
with a powerful and satisfying so und from an ultra stylish design.
Rear
Bluetooth pairing instructions:
To pair your audio device to the sound bar via BluetoPROSCAN
by the sound bar then go PROSCAN into your audio device (mobile phone, Tablet etc.)
settings and ena ble Bluetooth. ble Bluetooth.Bluetooth connection name:PROSCAN
This should automatically pick up all the Bluetooth devices
list you should see Soundbar, please PROSCAN select this and your device should pair
successfully.
ooth soundbar and feel your audio
in your vicinity, from the
Front
OPERATION AND LED DISPLAY
- You can connect several external devices simultaneously to the soundbar and select
the required device every time using the source selection function
- Press repeatedly the buttonat the (4)at the soundbar or the INPUT button on the
remote control to select the desired audio source
- The selected audio source ,Sound effect and volume control is displayed on the LED
display of the soundbar
- Digital LED display on the front of the soundbar
- Red LED indicates standby after show bye
- All other LED digital letter is white display
![](/img.php?id=3363978&img=bg3.png)
35
1 2 4
6 8
9
7
Description of front button on soundbar
increase the volume of the soundbar
2.decrease the volume of the soundbar
3.Power switch
4.Press to change the input source (AUX,OPTICAL,COAXIAL ,BT)
5.Pairing bluetooth
Description of rear panel on sound bar
6.Connect with two both of satellite speaker 7.Input AUX
8.Input Coaxial 9.DC22V 10.Input Optical
1.
10
Description of terminals on the rear of the unit:
Remote Control Description
STANDBY:
MUTE: Mute audio
INPUT:
VOLUME-: Decrease the volume of the soundbar
RESET: Volume reset
MOVIE/MUSIC/TV:Sound effect switchover
R-OUT
L-OUT AUX
DC22V
COAXIAL
OPTICAL
SUB-/+: volume for bass
VOLUME+:
Increase the volume of the soundbar
Switch to standby mode of the soundbar
Mode Message on the LED display
OPTICAL OPT(default)
AUX LINE
BLUETOOTH BLUE
COAXIAL COX
MUSIC E1
TV E2
Movie E3
SUB S -10/+10,00(Bass default)
Volume 01/20
Toggle among different input sources
(AUX/OPT/COX/BT)
![](/img.php?id=3363978&img=bg4.png)
Installation Instructions:
Step 1 : Plug the power adapter into the PROSCAN soundbar
Step 2: Switch the power button ON
Step 3: Pair the soundbar (see above pairing instructions) if you want to
use it in Bluetooth mode
Step 4: Attach an audio source to the AUX to connect the sound bar to an external
input
Step 5: Press INPUT on the remote to change between AUX and Bluetooth modes
R-OUT
L-OUT AUX
DC22V
COX
OPT
Connecting to external devices
L-OUT&R-OUT connect with two both of satellite speaker
With a 3.5mm to Cinch audio cable(supplied)
- Use the Cinch to 3.5mm audio cable provided to connect the soundbar to a
television set,a DVD player ,a game console or other suitable device
- Connect one end of the Cinch to 3.5mm audio cable provided to the output
sockets of your external device
- Attach the other end of the Cinch to 3.5mm audio cable provided to the AUX
Input sockets of the soundbar
It is detachable 2.1CH bluetooth soundbar ,take both end of satellite speake apart ,
put on the table independently ;if you want to be one whole set ,mount both end of
stellite speaker back to soundbar by snap joint (see picture )
With a digital Optical cable (not supplied)
Connection with better sound quality
- Use a digital optical cable (not supplied )to create a digital connection to a TV,DVD,
Blu-Ray player or other suitable devices
- Connect one end of the digital optical cable (not supplied)to the digital optical
output socket of your source device
- Connect the other end of the digital optical cable (not supplied)to the OPTICAL
input socket at the back of the soundbar .
With a digital Coaxial cable (not supplied)
Connection with better sound quality
- Use a digital coaxial cable (not supplied)to create a digital connection to a TV,
DVD ,Blu-Ray player or other suitable devices
- Connect one end of the digital coaxial cable (not supplied)to the COAXIAL
input socket at the back of the sound bar
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
![](/img.php?id=3363978&img=bg6.png)
Press the power button on the remote to ensure the soundbar is not in standby mode
Press the input button on the remote to switch between AUX and Bluetooth in case
you're in the wrong mode
Troubleshooting guide:
No power
Check the connection of the AC/DC adaptor between the unit and wall outlet
No sound
Check that the volume control is not at minimum
Check that mute is not set on the remote control
The Remote control is not working
Replace the batteries
Make sure there are no obstacle obscuring the front of the soundbar PROSCAN
The power light is on when power on, but no sound
Intermittent Bluetooth
For the best signal transmission please ensure your PROSCAN soundbar is located 4 meters away
from microwave ovens & Wi-Fi routers as this can interfere with the signal
Specifications:
Speakers: SUB Speaker 3''x2 4Ω 20W+passive speaker 3''x2 two end of speaker 3''x2 4Ω10W
Output sound press: 88dB
Frequency response: 80-20KHz
Remote control system: infrared
Adapter input: AC100V-AC240V 50Hz/60Hz 0.6A Max
Power output: 22V 1.63A
Standby power: <0.5W
Mid speaker : L670xW102xH102mm
Gift box: L1170xW149x153mm
Master carton : L1180xW309x167mm
One satellite speaker: L183xW102x102mm