VDWALL LVP615 LED Video Processor User Manual LVP605

Download:
Mirror Download [FCC.gov]
Document ID	3740962
Application ID	fcSPTDy65xdmjnZFYLcgSA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	262.93kB (3286584 bits)
Date Submitted	2018-02-05 00:00:00
Date Available	2018-02-05 00:00:00
Creation Date	2018-02-01 15:41:01
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-02-05 14:27:08
Document Title	LVP605
Document Creator	Acrobat PDFMaker 15 Word 版
Document Author:	LOUIS

LVP615 User Manual
LVP615
LED HD Video Processor
User Manual
V1.0
LVP615 User Manual
Contents
Chapter 1: Safety precautions-------------------------------------------------- 4
Chapter 2: Item list -------------------------------------------------------------------- 5
Chapter 3: Hardware connection
3.1
3.2
3.3
3.4
3.5
Rear view----------------------------------------------------------------------- 6
Port description----------------------------------------------------------------- 6
Hardware connection diagram----------------------------------------------- 8
Specifications---------------------------------------------------------------------9
Product dimensions------------------------------------------------------------11
Chapter 4: Front panel and remote control instructions
4.1 Front panel buttons and remote control schematic----------------------- 13
4.2 Remote control operation instructions---------------------------------------- 15
Chapter 5: Basic user instructions
5.1 Input signals selection ---------------------------------------------------------- 17
5.2 PIP/PBP operation--------------------------------------------------------------- 21
5.3 Mosaic operation----------------------------------------------------------------- 22
5.4 Other basic user operation----------------------------------------------------- 23
Chapter 6: Setup menu instructions
6.1 Output image setting------------------------------------------------------------ 26
6.2 Input video signal setting------------------------------------------------------- 30
6.3 Text overlay setting-------------------------------------------------------------- 33
6.4 Image quality setting------------------------------------------------------------ 35
6.5 Audio setting----------------------------------------------------------------------- 36
6.6 Communication setting---------------------------------------------------------- 37
6.7 Language setting------------------------------------------------------------------ 38
6.8 Advance setting------------------------------------------------------------------- 49
6.9PIP/PBP setting-------------------------------------------------------------------- 42
LVP615 User Manual
6.10 Mosaic setting------------------------------------------------------------------- 43
Chapter 7: Remote control instructions
7.1
Hardware communication-------------------------------------------------- 48
7.1.1 RS232 and USB-------------------------------------------------------------- 49
7.1.2 Wired network---------------------------------------------------------------- 50
7.1.3 WIFI connection--------------------------------------------------------------- 51
7.2 LVP615 series PC control software instructions---------------------- 58
7.2.1Control method---------------------------------------------------------------- 58
7.2.2Software interface instructions-------------------------------------------- 59
7.3
APP remote control---------------------------------------------------------- 76
7.3.1 Connection----------------------------------------------------------------------- 77
7.3.2APP control instructions-------------------------------------------------------80
Chapter 8 Copyright information---------------------------------------------------97
Appendix: modify the record table ----------------------------------------------------- 98
LVP615 User Manual
Chapter 1: Safety precautions
！Danger
There is high voltage in the processor, to prevent any unexpected
hazard, unless you are maintenance, please do not open the cover
of the device.
！Warning
1.
This device shall not encounter water sprinkle or splash,
please do not place anything containing water on this device.
2. To prevent fire, keep this device far from any fire source.
3. If this device gives out any strange noise, smoke or smell,
please immediately unplug the power cord from receptacle, and
contact local dealer.
4. Signal cables are not hot swappable.
！Caution
1.
2.
3.
4.
5.
6.
7.
Please thoroughly read this manual before using this device,
and keep it well for future reference.
In the event of lighting or when you are not going to use the
device for a long time, please pull the power plug out of
receptacle.
Nobody other than professional technicians can operate the
device, unless they have been appropriately trained or under
guidance of technicians.
To prevent equipment damage or electric shock, please don’t
fill in anything in the vent of the device.
Do not place the device near any water source or anywhere damp.
Do not place the device near any radiator or anywhere under
high temperature.
To prevent rupture or damage of power cords, please handle and
keep them properly.
LVP615 User Manual
8. Please immediately unplug power cord and have the device
repaired, when
1) Liquid splashes to the device.
2) The device is dropped down or cabinet is damaged.
3) Obvious malpractice is found or performance degrades.
Chapter 2
Item List
Please unpack the product carefully, then check whether all the following
things are included in the package. If anything is found missing, please contact
the dealer.
Standard accessories
The accessories supplied with this LED Video Processor may differ from
the figures contained in the User’s Manual, but they are applicable for the
regions where you live.(LED sending card is optional)
1.5m
power cord*1
1.5m DVI cable*1
1.5m RS232 to RJ45 User manual *1
0.5m DVI cable*1
CD*1
adapter cable*1
Remote control *1
Audio connector *1
BNC-RCA adapter *3
LVP615 User Manual
Chapter 3 Hardware connection
3.1 Rear view
3.2 Ports description
3.2.1 Video signal inputs (INPUT)
LVP615 supports 8 video signals input as follows:
Port
Description
LVP615 User Manual
V1
1*Composite Video (PAL/ NTSC)
V2 / YPbPr
1* Composite video (PAL/ NTSC) or analog
component video input
VGA1~VGA2
2 * PC analog signal
DVI
1* DVI ( PC digital signal)
HDMI
1*HDMI (HD digital signal)
DP
1*DisplayPort( digital signal input)
EXT.
1* Extended PAL/NTSC composite video input
3.2.2Audio input signals（AUDIO）
LVP615 supports 4-channel stereo audio inputs switching. Of
which,
2 channels are DP and HDMI input. The other 2 channels are AD1, AD2
external audio input. AD1 and AD2 can be mapped to any one of signal inputs,
and will be switched synchronous to the selection of video input signals.
3.2.3 Video signal output
Port
Description
VGA OUT
1-channel analog RGBHV signal output,
which can be connected to a local display
device for monitoring (it is strongly
recommended to use this port when
operating and setting LVP615).
DVI OUT1 /
2 same DVI digital graphic signal output,
DVI OUT2
it can be connected to external 2 LED
transmission cards or LED transmission
boxes.
DVI Loop OUT
1-channel computer DVI digital signal
loop output
LVP615 User Manual
3.2.4 Other ports
Port
Description
TCP/IP
LAN
local
area
network
control
interface
USB communication port
USB
Serial communication interface, used to
RS232
IN
connect the RS232 port of PC to realize
PC software control.
Serial communication cascading output
RS232
LOOP
for connecting the RS232 IN of next unit,
through single PC can control several
units.
RF
Antenna interface of wireless control
function
3.3 Hardware connection diagram
LVP615 User Manual
LVP615 User Manual
3.4 Specifications
Inputs
3×Video
1×YPbPr
2×VGA（RGBHV）
Nums / Type
1×DVI（VESA /CEA-861）
1×HDMI（VESA /CEA-861）
1×DP（VESA）
Video system
PAL/NTSC
Composite
Video
Amplitude Impedance
VGA format
VGA
PC（VESA standard）
Amplitude
Impedance
YPbPr format
YPbPr
1V（p_p）/ 75Ω
R、G、B = 0.7 V（p_p）/ 75Ω
SD/HD（CEA -861）
Amplitude
Impedance
Pb= 0.35V（p_p）/ 75Ω
Pr= 0.35V（p_p）/ 75Ω
DVI format
Custom output format
PC（VESA standard）
HDMI format
HDMI1.3（CEA-861）
Display Port 1.1 （ VESA
standard）
Video：BNC
YPbPr：BNC×3
Input connectors
≤1920x1080p_60Hz
Y=1V（p_p）/ 75Ω
PC（VESA standard）
DP format
≤2048×1152_60Hz
VGA：15pin D_Sub(female)
DVI：24+1 DVI_D
HDMI：HDMI port A type
DP：Display Port
10
≤2304×1152_60Hz
Width≤3840
Height≤1920
≤1920×1080_60Hz
≤1920×1080_60Hz
，
LVP615 User Manual
Outputs
Nums/ type
2×DVI,1×VGA(RGBHV)
1024×768_60Hz/75Hz
1280×1024_60Hz/75Hz
1600×1200_60Hz
1920×1080p_50Hz/60Hz
1366×768_60Hz
1440×900_60Hz
2048×1152_60Hz
VGA/DVI format
2560×816_60Hz
2304×1152_60Hz
1920×1200_60Hz
1200×1600_60Hz
1080×1920_60Hz
1536×1536_60Hz
Custom output format（maximum horizontal pixel:3840，
maximum vertical height:1920）
VGA OUT:15Pin D-sub( female)
Output connectors
DVI OUT1：24+5 DVI_I
DVI OUT2：24+1 DVI_D
Others
Control
RS232/USB/LAN/WIFI/Remote control
Input voltage
100-240VAC 50/60Hz
Power consumption
≤25W
Environment
Temperature
0-45
℃
Environment Humidity
15-85%
Product Size
483(L) x 274(W) x 66.6(H)mm
Weight
G.W.：5.7 Kg, N.W.：4.2Kg
11
LVP615 User Manual
3.5 Product dimensions
12
LVP615 User Manual
RS232 cable order：
13
LVP615 User Manual
Chapter 4 Front panel and remote control instructions
LVP615 supports front panel button, remote control, RS232 and LAN
control. Same printing on remote control buttons and front panel
buttons,same button functions. The instructions are as below.
4.1 Front panel buttons and remote control schematic
11
14
10
LVP615 User Manual
The buttons on remote
control have the same
functions as the relative
buttons on front panel.
4.1.1Input signal selection buttons
（
，
）：select the
input signal.
4.1.2
Setup buttons(
，
),Set the output
image parameters.
4.1.3VGAauto adjustment button (
input signal.
)automatically adjust the VGA
4.1.4 Switching time setup button（
）：select seamless switching
time including 0 second (cut), 0.5 second,1.0 second and 1.5 second
( fade in fade out) and blend switching function.
15
LVP615 User Manual
4.1.5
PC signal bypass output (
)：Switch between part and full
display of PC signal. The indicator shows the current state of the input
signal.
4.1.6 PIP/PBP keys（
，
，
，
）：
:PIP/PBP turn on/ off button. When the indicator is on, press
input signal selection to choose different group input or current input itself
as the PIP signal.
，
4.1.7
，
:Switch PIP/PBP model.
Mosaic button （
）Turn on /off mosaic function. The
indicator shows the current state of mosaic.
4.1.8
Freeze button （
） turn on / off freeze function.
4.1.9 Brightness adjustment button （
，
） adjust output
brightness level under user operation station.
4.1.10
4.1.11
remote control sensor: built- in infrared receiver.
remote launch window: built-in infrared transmitter.
16
LVP615 User Manual
4.2 Remote control operation instructions
4.2.1Open the battery compartment on the back of the remote control,
make sure the battery effective contact
4.2.2 Please aim remote control to the sensor area of LVP615, if
there is obstacle between them, LVP615 may not receive
command.
4.2.3 To make sure remote control has a good performance. If found
improper operation, please replace new battery immediately.
4.3.3
Batteries shall not be exposed to, such as sunlight, fire or
the like overheated environment.
Chapter 5 Basic user instructions
After LVP615 boot, it enters the operation status of last shut-down including
signal switching status, PIP/POP (or Text overlay) status and mosaic status.
Among them, PIP/PBP( or text overlay) status and mosaic status can only
realize relativefunctions and cannot do other operation. Other relative
operations are available under signal switching status. We illustrate the
common operations as below.
17
LVP615 User Manual
5.1 Input signals selection
LVP615 supports two signal switching methods including“One key
switching”and“Pre.+Take switching”. The switching method can be set in
user setup menu “2.6 switch mode”. “One key switch” is default method.
One key switch to new input signal through input signal selection buttons.；
“Pre.+Take switch” only available for seamless switching. Press input buttons
to preselect first. Then press Take button to switch from current input signal to
preselected signal.
18
LVP615 User Manual
Input signal selection as follows：
Buttons
Description
1* Composite video signal input (PAL/ NTSC)
1* Composite video (PAL/ NTSC) or analog
component video input
2 * PC analog signal input
1*DVI digital signal input
1 * HDMI digital signal input
1* DisplayPort digital signal input
1* extended signal input
Note：(1) YPbPr and V2 share the same port. If need,configure
the port to YPbPr in setup menu.
5.1.1 One key switch
LCD screen display as below：
19
LVP615 User Manual
Input：
HDMI
In Status：
1080p_60Hz
-------------------------------------Output Size：
1920x1080
Output Start：
（0，0）
-------------------------------------Switch Mode：
One Key SW.
Switch Time：
1.5 Sec
After select input signal, The first line on the LCD display the
current input signal. Like：“ Input：HDMI ” 。The second line on the
LCD display the signal status.If no active input, display” No input’.
Meanwhile,the corresponding indicator flicker. Led screen is black.
If active input, display input signal format Like：“ 1080p_60Hz ” 。
5.1.2 Pre.+Take switch
LCD screen display as below：
20
LVP615 User Manual
Curr. Input：
HDMI
Curr. In Status：
1080p_60Hz
Pre. Input：
V1
Pre. In Status：
PAL
-------------------------------------Output Size：
1920x1080
Output Start：
（0，0）
Switch Mode：
Pre.+Take SW.
Switch Time：
1.5 Sec
Switching signal method: press input button to preselect first, LCD screen
displays the current input status and preselect input status. Then press Take
button to switch current input to preselect input.After the completion of
switching, preselect signal become the current input signal. The status of the
preselect signal indicator: when the signal is valid, the indicator flicker rapidly.
when the signal is invalid, the indicator flicker slowly.
Note ： Pre.+Take switch only available for seamless switching. LVP615
supports seamless switching between any two different input groups as follow.
Same group does not support seamless switching. For example, current input
is V1( V1 in group A). Then, preselect signal is only from B,C,D group. Signal
group as follow. ：
V1、V2
VGA1、 DVI、
VGA2
HDMI、DP
5.1.3 Switching time setting（C/ F）
21
EXT
LVP615 User Manual
In the signal switching status, press C/F button continually can change the
current seamless switching transition time. LVP615 can achieve seamless
switching between any two different input groups of four input groups.
Switching effect includes seamless switching (0s), Fade in/ Fade out (o.5s 1s
1.5s) and blend switching.
Seamless switching（Cut）：On the LCD“Switch time” is 0s. LVP615 default
switching is CUT.
Fade in fade out（Fade）：On the LCD“Switch time”is 0.5s、1.0s or 1.5s. In this
mode, different group signals support fade in fade out switching.
Blend switching：at this moment, on the LCD, current input is the main input.
Select different group input signal as blend signal. The main input will overlay
in the blend signal. Press blend signal or main signal button again. Then switch
to selected signal. The whole process is fade in fade out effect.
Main Input：
HDMI
Main In Status：
1080p_60Hz
Blend Input：
V1
Blend In Status：
PAL
-------------------------------------Output size：
1920x1080
Output start： （0，0）
--------------------------------------
Note：1. YPbPr does not support seamless switching, fade in
fade out or blend switching. Switching between any signal and
YPbPr signal will cause black led screen.
2. Blend switching is only for signal switching. For other
operations, press C/F to exit the blend switching state.
22
LVP615 User Manual
5.2 PIP/PBP operation
LVP615 allows to insert PIP window on the current display signal.
That is dual image display function(PIP/PBP)。PIP signal can be any
input signal from other input groups or current input signal itself.
（signal group refer to page 19signal group list）Dual image size can
be preset 3 modes.The detailed operation method is as follow：
Enter PIP/PBP mode： press On/Off
button，the indicator will
be on. LVP615 enters PIP/PBP mode. Then press input signal button
to select PIP signal. At the same time, LCD will display main input and
pip input status and size.（as shown below）
Main Input：
HDMI
Main In Status：
1080p_60Hz
PIP Input：
V1
PIP In Status：
PAL
-------------------------------------Main Output Size：
1920x1080
Main Output Start： （0，0）
PIP Output Size：
640x320
PIP Output Start： （16，16）
Select PIP input signal：In PIP mode，press button to select
corresponding signal. Then this signal is configured as PIP input.
Select Main input signal：Press On/Off
button to close PIP
mode.，Press button to select corresponding signal as main input
signal. Then press On/Off button to enter PIP mode to select pip
signal again.
23
LVP615 User Manual
Switch PIP/PBP mode：When PIP/PBP is on，press buttons M1、
M2、M3
directly to select display mode fast.
5.3 Mosaic operation
Multiple units LVP615 cascading can drive huge resolution LED screen. Only
when the current input is DVI, press Mosaic button and the indicator is on.
LVP615 enters to Mosaic operation. Press the button
again and the indicator is off, LVP615 exits Mosaic.
Mosaic Input：
DVI
In Status：
1080p_60Hz
Input Image Size：
960x540
Input Image Start：
（0，0）
-------------------------------------Mosaic out size：
1920x1080
Mosaic out start： （0，0）
Mosaic PIP:
off
-------------------------------------Device ID:
入拼接信号
Note：
5.3.1 In mosaic mode, PIP display is available.
5.3.2 In following conditions，LVP615 cannot enter mosaic status.
（1）The input signal selected is not DVI；
（2）Bypass is on；
（3）The resolution of DVI input signal is different from the
output resolution of processor.
24
LVP615 User Manual
5.4 Other basic user operation
5.4.1 Brightness selection（Brt+，Brt-）
LVP615 supports 64 level or 100 level brightness selection.
According to“8.5 bright level” selection，adjustment
range has two
kinds：0~64 or 0-100. Factory default is 0-64。To make sure of full
gray scale of output image, it always set as 64（0-100 default value is
50） ！
button
description
BRT-
Reduce LVP615 output brightness，the lowest is
0.
BRT+
Increase LVP615 output brightness, the highest
is 64 or 100.
5.4.2
VGA input auto adjustment (Auto)
When LVP615 is in one key switch status and current valid
input signal is VGA, press Auto button to adjust VGA input signal
sampling parameters. Then the VGA output image can be clear and
full.
This operation is normally performed when a new VGA source
is connected. Auto adjustment time is depend on the signal status.
Normally it’s less than 1 second. Sometimes it’s necessary to
25
LVP615 User Manual
perform several times until the output image is clear, full and stable.
5.4.3 Full/ part display（Bypass）
In signal switching status, press Bypass
button to switch full
and part display.
This function only works when current signal is PC input signal
（VGA1/ VGA2/ DVI /HDMI /DP). Fixed other signals to Full mode.
state
description
Full
Full display,the input image is compressed and fully
displayed on the led screen and the indicator is off.
Part
Part display, the input image is not compressed.Only a
part of it can be displayed on the screen and the indicator
is on.
Note:When the width and height of input image are lower than the
LED screen real width or height value. Part display is invalid.
5.4.4 Text overlay
LVP615 allows for overlapping text, logo or flash on the current
image. The operation is as below.
When the current input display properly, enter setup
menu“3.Text overlay” ， set ”3.1text overlay” on ， then select text
source.Text can be produced by PowerPoint and other office software.
26
LVP615 User Manual
5.4.5 Image freeze (Freeze)
Press Freeze button and the indicator is on, the current image is
frozen. Press Freeze
button again or switch to another signal to exit
Freeze status.
5.4.6 Device information view (OK)
In signal switching status, press OK to check the LVP615 current
setting and information.
System info
-------------------------------------model：
LVP615
version：
V0.0.8/V0.0.8
IP：
192.168.1.8
Mask：
255.255.255.0
Gate：
192.168.1.1
MAC：
76-64-77-00-00-00
Device ID:
Chapter 6: Setup menu instructions
Setup menu is to set the entire processor. There are 9 section including
output image、input image、text overlay、 image quality、audio、
communication、language、advance、PIP/PBP、mosaic.
27
LVP615 User Manual
setup
-------------------------------------1. Out Image
＞＞
2. Input Video Signal
＞＞
3. Text Overlay
＞＞
4. Color&Brightness,etc
＞＞
5. Audio
＞＞
6. Communication
＞＞
7. 语言/Language
＞＞
8. Advance
＞＞
After the system starts，Press Setup
press↑,↓
to enter the setup menu.Then
button to select the corresponding menu item to be set. Press OK
button to enter and
return back upper level menu. The following is a
detailed description of each menu function：
6.1 Output image setting
Press Setup to enter setup menu. Press ↑,↓
28
button to select“1.Out
LVP615 User Manual
image” item.Then press OK
button to enter the following image“1.Out
image” item.
1.Out Image
-------------------------------------1.1 Resolution
1920x1080_60
1.2 Out Width
1920
1.3 Out Height
1080
1.4 Out H_Start
1.5 Out V_Start
1.6 Test Pattern
off
6.1.1 Set output format
LVP615 can output image from the VGA OUT and 2 DVI OUT.
There are 16 fixed output format and custom output format.（refer to
page 9specifications）. Users can select fixed output format not less
that the LED screen resolution or select custom output format which
can realize pixel to pixel display in concert with
2.1 .1 custom DVI
EDID.
Operation steps：
Press ↓to select “1.1 Resolution” item. Rotate knob
suitable output format，like“1280×1024_60”，Press OK
to select
button, the
screen will display confirmation menu. Press OK button again to
confirm the output format. The device will restart automatically.
29
LVP615 User Manual
tips
-------------------------------------Data will reset
Press  toreset
Press  to cancel
Note: to custom output format，after selection，need further set
1.1.1 custom width、1.1.2 custom height and 1.1.3 custom V frequency.
Press
↓
button to 1.1.4 Apply，Press “OK”to make parameters
effective.
1.1 Custom Resolution
-------------------------------------1.1.1 Cus. Width
1920
1.1.2 Cus. Height
1002
1.1.3 Cus. V Freq.
60
1.1.4 Apply
OK To Apply
30
LVP615 User Manual
6.1.2 Set output image parameters
LED screen real resolution can be arbitrary. So we need set LVP615 to
outputthe same image as the led screen. Then the LED screen can
display whole image.
（0，0）
Out hori start LL
Out_hori_width
Our vert_start
LVP615 out image area
1080
Out vert height
LED screen
LVP615 output resolution = 1920×1080
1920
As shown in the above picture: the size and location of output
image of LVP615 can be defined in 4 parameters:
Item NO.
Item name
1.2
Out_hori_width
1.3
Out_vert_height
1.4
Out_hori_start
1.5
Out_vert_start
Note：current set parameters can be changed by rotating knob.
knob rotating speed can decide the step value. Press“OK”button to
save the set parameters.
31
LVP615 User Manual
6.1.3
Test pattern
LVP615 can generate 36test patterns for LED screen testing.
If this item value is “off”, turn off Test pattern. Select other number
and confirm.Then one corresponding test pattern of 36 pcs will be
selected.
Operation steps：
Press ↓ button
to select“1.6 Test pattern” item，then rotate knob
to select suitable test pattern number and press ”OK” to apply the test
pattern.
-------------------------------------1.1 Resolution
1920x1080_60
1.2 Out Width
1920
1.3 Out Heith
1080
1.4 Out H_Start
1.5 Out V_Start
1.6 Test pattern
0 - >5
Note：The current signal must connect valid input. Then the test
pattern has output. Otherwise no output.
32
LVP615 User Manual
6.2 Input video signal setting
Press Setup button to enter setup menu. Press↓
Input video signal and press OK
button to select 2.
to enter this item.
2.Input video signal
-------------------------------------2.1 DVI EDID
1280x1024_60
2.2 V1/V2 backup
off
2.3 VGA1/VGA2 backup
off
2.4 HDMI/DVI backup
off
2.5 V2 or YPbPr
V2
2.6 Switch mode
one key switch
6.2.1 DVI EDID
LVP615 supports custom DVI EDID. In concert with “custom
output format”， LVP615 can realize DVI input image and output
image pixel to pixel display. LVP615 supports 16 fixed DVI EDID and
custom EDID. Normally the parameters setting should be consistent
with“custom output format”（refer to page28 ).
Operation steps：In the menu 2.1 DVI EDID，rotate knob
to
select suitable resolution and press OK to save data. After save data,
need press OK
to enter“2.1 custom DVI EDID” menu to set
2.1.1custom width、2.1.2custom height and 2.1.3 custom V frequency
and press ↓ to enter APPLY and press “OK” to make parameters
effective.
33
LVP615 User Manual
2.1custom DVI EDID
-------------------------------------2.1.1 Cus. width
1920
2.1.2 Cus. height
1002
2.1.3 Cus. V Freq.
60
2.1.4 Apply
OK to apply
6.2.2 Hot spare setting
LVP615 supports hot spare of input signals. When the current
input signal is lost. LVP615 will switch to the spare signal automatically
to avoid image interruption caused by the fault of signal source.
2.Input video signal
-------------------------------------2.1 DVI EDID
1280x1024_60
2.2 V1/V2 backup
off
2.3 VGA1/VGA2 backup
off
2.4 HDMI/DVI backup
off
2.5 V2 or YPbPr
V2
2.6 switch mode
one key switch
As shown in the above table，if ”2.2 V1/V2 backup
on”, if V1
signal is lost, processor will switch to V2 automatically.
6.2.3 V2 or YPbPr selection
V2 and YPbPr of LVP615 share the same port and button. Need
configure. Default input is V2. If need YPbPr input, then need set this
port to YPbPr.
34
LVP615 User Manual
Operation steps：
In the menu of
2.5 V2 or YPbPr，rotate knob
to select needed
parameters and press “OK” to make them effective.
6.2.4 Signal switch mode
Press Setup to enter setup menu， press ↓ to select “2. Input video
signal”，Then press OK to enter“2.input video signal ”，and press ↓ to
select
signal
switch
mode“one
key
switch
”or
switch ”,Press OK to apply.
2.Input video signal
-------------------------------------2.1 DVI EDID
1280x1024_60
2.2 V1/V2 backup
off
2.3 VGA1/VGA2 backup
off
2.4 HDMI/DVI backup
off
2.5 V2 or YPbPr
V2
2.6 switch mode
Pre.+Take SW. ？
35
Pre.+Take
LVP615 User Manual
6.3 Text overlay setting
3.Text overlay
-------------------------------------3.1 Text overlay
off
3.2 Text source
？
3.3 Text mode
< threshold
3.4 Threshold R
3.5 Threshold G
3.6 Threshold B
6.3.1 Text overlay operation
In the current input signal， press Setup
and press↓
to
select”3.text overlay”，Press OK to enter，in the menu“3.1text
overlay ” rotate knob to switch it on. Then press ↓ to enter”3.2text
source ” menu to rotate Knob to select text input signal. Text
overlay is on. If need turn it off, enter 3.1 text overlay and switch it
off.
6.3.2 Text overlay parameters setting
3.1Text mode：LVP615 can custom text mode < threshold or >
threshold.
< threshold means text signal image which is less than
the current threshold value will overlay on the current signal. The
bigger part will be automatically filtered out. > threshold means text
signal image which is bigger than the current signal will overlay on
36
LVP615 User Manual
the current signal.
Threshold R /G/B ： This is used to set three thresholds
subtitles red, green and blue respectively for a particular value
between 0 to 248.
The following is the text overlay example. Text file is made by
Powerpoint. Parameters are as follow:
3.3 Text mode