VELUX America 863765 Window Operator User Manual 1
VELUX America Inc. Window Operator 1
Contents
- 1. User manual 1
- 2. User manual 2
User manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1221002 |
| Application ID | FmpWoiSSBUNGwksdjvYvDA== |
| Document Description | User manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 219.8kB (2747472 bits) |
| Date Submitted | 2009-12-30 00:00:00 |
| Date Available | 2009-12-30 00:00:00 |
| Creation Date | 2009-12-10 12:43:31 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2009-12-10 12:43:37 |
| Document Title | User manual 1 |
| Document Creator | Adobe InDesign CS4 (6.0.4) |
VSE/VCE KLR 100 ENGLISH: User manual ESPAÑOL: Manual del usuario FRANÇAIS : Notice d'utilisation VAS 452169-2009-12 English User manual Español Manual del usuario Français Notice d'utilisation 2 VELUX 4-73 74-143 144-212 VELUX 3 Contents Congratulations on your new VELUX product In order to make the best use of your product please read these instructions on operation and maintenance. Important information / Warnings 6-7 44-45 46 45 46-47 48 49 50 Extending the system Getting started Initial set-up Remote control functions 8-9 10-11 Operation Locating and operating a product - One skylight - More than one skylight Closing the skylight automatically Choosing positions Disabling rain sensor 12-14 12 13-14 15 16 17 Menu functions Menu guide Navigating through the menus Changing language Room, Group and Zone - Creating a Room - Editing a Room - Creating a Group Naming Programs - My program - Program under Shortcut P1/P2 Time and date Keypad lock 4 VELUX Display - Display light - Sleep mode Rearranging order Access code Software version Clearing remote control settings ENGLISH 18 19 20 21 22-23 24-25 26-27 28-29 30-41 31-35 36-41 42 43 Registering new products Using additional activation controls - Copying to a new remote control - Copying to a remote control in operation Security key 52-53 54-59 56-57 58-59 60-61 Resetting Resetting and preparing for registration Resetting the remote control Adjusting the opening 62 63 64-65 Fitting of holder for remote control 66-67 Use and maintenance Power failure / Mislaid remote control Maintenance 68 69 Further information Display symbols Display texts Glossary 70 71 72 ENGLISH VELUX 5 Important information / Warnings Please keep instructions for future reference and hand them over to any new user. Safety • Before operating ensure that the skylight with electrical products can be and is operated without risk of damage to property or injury to people or animals. • For personnel safety never have head, hand, arm or any other body part out of or through the opening of the skylight without first having switched off main power supply. • Children must not be allowed to play with the skylight and its electrical products. The remote control should be kept out of reach of children. Do not allow children near an open skylight. • If repair or adjustment work is needed, disconnect from main power supply and ensure that it cannot be reconnected unintentionally. • The main power supply cable is for indoor use only. • It is recommended that a remote control be placed in the room where the skylight and its electrical products have been installed. • If the skylight is positioned within reach, the opening of the skylight operator must be adjusted to reduce the maximum size of the opening (see section Adjusting the opening). Failure to make such adjustment can result in serious injury or death. • Make sure that the insect screen is installed before putting the skylight into use. Function • If the rain sensor gets wet, the skylight automatically closes. • Disabling the rain sensor while the skylight is open creates a risk of water to the interior of the building. • To prevent the skylight from closing because of very fine/weak rain, fog or dew, the rain sensor is equipped with a heating element to keep the surface dry. • If the rain sensor is activated, the skylight will close within approximately 30 seconds. If the skylight is activated with the remote control or another activation control, it will take up to one minute until the skylight is completely closed. Therefore, in case of sudden rain, water may enter the room before the skylight is closed. • In case of snow and/or ice, the operation of the skylight may be blocked resulting in damage to the skylight. 6 VELUX ENGLISH Product • This product has been designed for use with genuine VELUX products. Connection to or use with other products may cause damage, malfunction or injury. • Electrical products must be disposed of in conformity with all local codes, ordinances, rules and regulations for electronic waste and not with household waste. • Used remote control batteries have to be disposed of in conformity with the relevant environmental regulations and ordinances. • Expected lifetime of the remote control battery: Approx 1 year. • The packaging can be disposed of with usual household waste. • Radio frequency band: 2.4 GHz. • Radio frequency range: 110 yards (100 m) free field. Depending on building construction, the indoor range is approx 30 ft (10 m). However, constructions with reinforced concrete, metal ceilings and plaster walls with steel members may reduce the range. Maintenance and service • Disconnect from main power supply before carrying out any maintenance, repair, adjustment or service work to the skylight or products connected to it and ensure that it cannot be reconnected unintentionally during this time. • Maintenance and installation must be carried out in consideration to Health and Safety at work requirements. • If main power supply cable is damaged, it must be replaced by a qualified electrical installer in accordance with all local codes, ordinances, rules and regulations. • Spare parts are available through VELUX. Please provide information from the data plate. • If you have any technical questions, please contact VELUX. FCC ID: XSG833429 and IC ID: 8642A-863765: Remote control FCC ID: XSG863765 and IC ID: 8642A-863765: Skylight operator This device complies with part 15 of the FCC and RSS-210 of the IC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ENGLISH VELUX 7 Initial set-up Auto set-up roducts to be operated with the remote control must be registered in the remote control. Registration, however, depends on whether the remote control is new or whether it is already used for operating other products. Prepare products for registration and press Register within 10 minutes Register "Register" to start registration. P1 P2 Auto set-up • If the remote control is already in operation, proceed with section Registering new products. • If the remote control is new, proceed as follows. hen the initial set-up has been completed, the registered products will appear in the display. Press Info Registration is running. This can take up to two minutes. he display shows "Completed" when all products have been registered. Note: If the display shows "Failed", remove the batteries from the remote control. Prepare the products for registration, see section Resetting and preparing for registration. Repeat the initial set-up. lide off the battery cover of remote control as shown. Insert the three batteries supplied (type AA, 1.5 volt). Replace cover. Auto set-up Completed House No. 1 Window language Choose language: to highlight your language. Press Press "Enter" to confirm your choice. repare products for registration. Disconnect the main power supply to the products for 1 minute and then reconnect it. The products can now be registered in the remote control within the next 10 minutes. 8 VELUX ENGLISH Eesti English Español Français he display shows one of the registered products. to see the other registered products. Press Menu Locate P1 P2 Enter P1 P2 or use of more than one remote control, all products must be registered in one of the remote controls, see above. Then the information must be copied from this remote control to the other remote controls, see section Using additional activation controls. ote: The opening of the skylight operator must be adjusted if your skylight is positioned within reach, see section Adjusting the opening. ENGLISH VELUX 9 Remote control functions House No. 1 Window The display indicates which product is being operated, which menu function is being used etc. The top line of the display states the chosen area. Products are as default shown under the area House. The bottom line of the display states the function of the two selection keys. Note: The display shows the last product operated. The word "Window" is used for both windows and skylights. Selection, navigation and program keys Selection keys - for activating the menu and confirming the chosen menu function. - for locating the Room, the Group, the Zone or the product to be operated. House No. 1 Window Menu Locate Menu Locate P1 P2 P1 P2 P1 P2 P1 P2 The current function of the individual selection key is stated directly above in the display. Navigation keys - for scrolling up and down in the product or menu list. - for scrolling through the time intervals to set the remote control to close the skylight automatically. Shortcut keys P1/P2 Keys for operating the product chosen - for activating a program by pressing just one key. Keys for operating a product or a Group of products OPEN/UP or CLOSE/DOWN Short key pressure: Product will travel to maximum top or bottom position. Long key pressure: Product will travel to pre-set position. See section Choosing positions. Stop and status key STOP / STATUS Short key pressure: The product in operation stops or the status is shown. Long key pressure: All products in operation stop. 10 VELUX ENGLISH ENGLISH VELUX 11 Locating and operating a product To be able to operate a product (eg a roller shade), you first have to locate the product in question in the display. The examples show the easiest way to find the product you want to operate. One skylight More than one skylight With one electrical product The skylight (indicated as "Window" in the remote display) is equipped with a skylight operator only and therefore you do not have to locate the product first. Press to start operation. House No. 1 Window Menu With one electrical product Locate House Three skylights are equipped with skylight operators only. No. 2 Window The example shows how to locate and open skylight No. 2. The skylight is equipped with a skylight operator and a roller shade. Press to find the roller shade (indicated as "Blind"). Press to start operation. 12 VELUX ENGLISH to find skylight No. 2 (indicated as "Window"). Press to open the skylight. Menu Locate P1 P2 Note: You can rearrange the order of the individual products, Groups, Rooms and Zones displayed, see section Rearranging order. With more than one electrical product The example shows how to locate and operate the roller shade. Press House No. 1 Blind Menu Locate P1 P2 ENGLISH VELUX 13 Locating and operating a product Closing the skylight automatically More than one skylight When a skylight has been opened with the remote control, you can set it to close again automatically after a certain time. For instance you might want to air your house briefly when returning home. The possible settings are: Disabled, 5 min, 10 min, 15 min, 20 min, 30 min, 45 min and 60 min. With more than one electrical product One skylight is equipped with a skylight operator. In addition, all five skylights are each equipped with a roller shade. Press ocate skylight No. 1 (indicated as "Window"). to open the skylight. Press No. 1 Window Menu No. 1 Window Locate he display shows the icon and the text "Auto Close". Start item 3 within 5 seconds, otherwise the skylight will not close automatically. Auto Close P1 P2 House isplays the list of product types within the area House. and highTo operate one of the roller shades, press light "Blind". Press "Enter". to highlight roller shade "No. 3". "Enter". Press to start operation. 14 VELUX Running Window Blind Enter Back P1 P2 No. 1 No. 2 No. 3 No. 4 ress Press Locate Running Menu "Locate". House House The example shows how to locate and operate roller shade No. 3. he example shows how to time skylight No. 1 (indiT cated as "Window" in the remote display) to close after 10 minutes. Enter P1 Scroll via through the time options and choose "in: 10 min". Auto Close in: 10 min P1 Blind he display shows the icon skylight is closed. and counts down until the Back P2 P2 House No. 1 Window Closes in 10 min Menu Locate If you close the skylight earlier than chosen, the function will be cancelled. ote: Registered products can be set to operate autoN matically via Programs. ENGLISH ENGLISH VELUX 15 Choosing positions Disabling rain sensor A product or a Group of products can be set to travel to a certain position. If the rain sensor gets wet, the skylight operator automatically closes the skylight within 30 seconds. The example shows how to set a roller shade to close by 50%. If you want to open the skylight even if it is raining, you must disable the rain sensor. When the rain sensor is disabled, the skylight can only open up to 50% of its normal opening distance. The example shows how skylight No. 1 (indicated as "Window" in the remote display) is opened even if it is raining. ocate the product in question, see section Locating and operating a product. House ote: If the rain sensor is disabled and "Auto Close" is not set, see section Closing the skylight automatically, the skylight will not close automatically for a period of 60 minutes. After this period, the skylight will remain open as long as the rain sensor is dry. No. 2 Blind roduct chosen is displayed. The example shows roller shade No. 2 (indicated as "Blind"). Menu Locate P1 P2 House Go to position ress and hold key and watch the display. Each black spot corresponds to the roller shade closing in 10% increments. Five black spots thus correspond to it closing by 50%. elease key ition chosen. and the roller shade will travel to the pos- ote: A short key pressure will make the roller shade travel to maximum top or bottom position. Some decoration and sunscreening products can be operated in two ways. For instance, a Venetian blind can be drawn up and down and its slats can be tilted. Once the with product has been located, choose Tilt or Turn the navigation keys 16 VELUX ENGLISH 50% down Locate the skylight (indicated as "Window"). to open the skylight. Press No. 1 Window Menu Locate information he display shows that the operation cannot be executed because the skylight operator has been limited by the rain sensor. You are asked whether the rain sensor is to be disabled temporarily. Press "Yes" to disable the rain sensor temporarily. Yes Disable rain sensor temporarily? P1 No P2 The rain sensor will now be disabled for 60 minutes. When the skylight is closed, the rain sensor will be enabled again. If the skylight is set to close automatically, the rain sensor will only be disabled until the skylight is closed automatically. Note: It is recommended to set the skylight to close automatically to reduce the risk of water to the interior of the building. ENGLISH VELUX 17 Menu guide Navigating through the menus Guide to the menu functions of the remote control. Additional information about the individual function is provided in the relevant section. The example shows how to find the menu item Room by means of menu choices. Press "Menu". Group Rearrange order Rename Clear Enter House No. 1 Window Menu Back Display Access code menu Keypad lock House settings p. 22-25 p. 26-27 p. 46-47 p. 28-29 p. 50 isplays a list of menu items under Menu. to highlight "House settings". Press Press Enter Back p. 20 p. 44-45 p. 42 p. 48 p. 43 "Enter" to confirm your choice. System settings Program settings Back Displays a list of menu items under House settings. Press Press to highlight "Room". "Enter" to confirm your choice. ou can now proceed with the menu functions under menu item Room. User settings Locate P1 P2 House settings User settings System settings Program settings Enter Back P1 P2 House settings Room Group Rearrange order Rename Enter Back P1 P2 System settings Register product Copy system Security key Configure Software version Enter Back p. 52-53 p. 56-57 p. 60-61 Enable p. 31-39 Record Delete Rename Rearrange order Enter ENGLISH Back House his way of choosing menu items is shown as follows in the rest of the instructions: p. 49 program settings 18 VELUX Menu User settings Language Locate Time and date Enter No. 1 Window menu House settings Room House Press Scroll through the menus: "Menu". House settings No. 1 Window Menu Locate P1 P2 Room ENGLISH VELUX 19 Changing language Room, Group and Zone You can change the display text language. To make it easier to locate and operate the products it is recommended to link each product to a Room and/or a Group. Products are as default shown under the area House. The example shows how to change it into French. House Room 2 No. 1 Window Press Scroll through the menus: "Menu". Room 1 Menu Locate P1 P2 Definition of Room A Room consists of one or more products of any type located in the same physical room, eg bedroom or kitchen. A product can be assigned to one Room only. User settings Language language Dansk English Français Deutsch he display shows a list of languages. The current lanT guage has been ticked. Room 1 Enter Back P1 P2 ress Press to highlight a new language. "Enter" to confirm your choice. A Group consists of at least two products of the same type (eg two roller shades). In each Room, a Group "All" with all products of the same type is automatically created to make it easier to locate and operate products of the same type simultaneously. language Dansk English Français Deutsch Room 2 Definition of Group Groups created across more Rooms are called Zones. Enter Back P1 P2 Room 1 Room 2 Information The display shows that the change has been saved. 20 VELUX ENGLISH Sauvegardé Français Definition of Zone A Group created across more Rooms. You can create a Zone consisting of for instance all roller shades on the skylights of the house facing west and south. ENGLISH VELUX 21 Creating a Room Rooms are created to make it easier to locate and operate your products. he example shows two rooms with two skylights (indicated as "Window" in the remote display) in each. Below it is shown how to create Room 1 by moving the relevant products from House to Room 1. House No. 1 Window Press Menu "Menu". More Continue P1 P2 Save new Room Undo product Undo new Room Displays a list of options. Press Press to highlight "Save new Room". "Enter" to confirm your choice. Highlight one of the other options to undo your choice. Locate Enter Back P1 P2 Information Room created Scroll through the menus: House settings Room Create Product from areas, here the area House. 3 Displays theto highlight the area with the product to be as Press signed to Room 1 first. Press "Enter" to confirm your choice. • P ress "More" to move additional products to Room 1. You will return to the list in item 4. Repeat items 4-5 until the relevant products have been moved to Room 1. • Press "Continue" to proceed. No. 1 Continue House House Window Displays the product chosen. isplays a list of all products in House. The product type, in this case skylights (indicated as "Window"), appears in the display. The individual products can be identified by pressing for a short period of time. This will activate the product briefly. Press Press 22 VELUX to highlight the product to be moved to Room 1. "Enter" to confirm your choice. ENGLISH House Enter Back P1 P2 The display shows that a new Room has been created. he display asks whether you want the remaining products to be assigned to the next Room. • Press "Yes" to save the remaining products in Room 2. • Press "No" to return automatically to the list in item 3 and possibly create more Rooms. Note: When creating Room 1, Room 2 will automatically be created. Information Save all remaining products in next Room Yes No Information Room created House Window No. 1 No. 2 No. 3 Enter Back P1 P2 The display shows that a new Room has been created. ote: Numbers are assigned in the order in which the products are moved to the Room in question. Room 1 ENGLISH Room 2 VELUX 23 Editing a Room You can edit the Rooms you have created, ie one or more products can be moved from one Room to another. he example shows how the skylight operator in skylight No. 1 (indicated as "Window" in the remote display) can be moved from Room 1 to Room 2. isplays a list of the individual products within the product type in question. Press to highlight the product to be moved. The individual products can be identified by pressing for a short period of time. This will activate the product briefly. Press Room 1 No. 1 Window Press Scroll through the menus: "Menu". House settings Room Menu Locate P1 P2 "Enter" to confirm your choice. isplays a list of Rooms in which the product can be placed. to highlight the Room in which the product is to Press be placed. Press "Enter" to confirm the new location of the product. Window No. 1 No. 2 No. 3 Enter Back P1 P2 Place in Room 1 Room 2 Room 3 Enter Back P1 P2 information Rooms modified Edit The display shows that several Rooms have been modified. Move from Displays a list of the Rooms created. Press to highlight the Room from which the product is to be moved. "Enter" to confirm your choice. Press isplays a list of product types in the Room from which the product is to be moved. To choose the product type skylight operator, press and highlight "Window". Press "Enter" to confirm your choice. 24 VELUX ENGLISH Room 1 Room 2 Room 3 Enter Back P1 P2 roups are edited according to the same principle as Rooms. ote: Numbers are assigned in the order in which the products are moved to the Room in question. Room 1 Window Blind Enter Back P1 P2 ENGLISH VELUX 25 Creating a Group To make it easier to locate and operate products of the same type simultaneously, you can create a Group. he example shows a room with four skylights, each with a skylight oper2 ator. It is shown how to create Group 1 consisting of the skylight operators Room 1 on the two skylights No. 3 and No. 4 (indicated as "Window" in the remote display). The example presupposes that Room 1 has been created. Note: A number of Groups, "All" each consisting of all products of the same type in the Room in question, was created automatically when Room 1 was created, see section Room, Group and Zone. Press Scroll through the menus: to highlight the product to be included in Group 1. Press The individual products can be identified by pressing for a short period of time. This will activate the product briefly. Press No. 1 Window "Menu". Menu Locate P1 P2 he display asks whether additional products are to be moved to Group 1. • Press Enter Back P1 P2 Information "Save" to create Group 1. House settings Group Create Add more to Group or save Group More Save P1 P2 Displays a list of the Rooms created. to highlight the Room in which Group 1 is to be Press created. Press "Enter" to confirm your choice. Room 1 Room 2 Room 3 Enter Back P1 P2 roups are edited according to the same principle as Rooms. 26 VELUX ENGLISH Group 1 Room 1 Window Blind Displays a list of the product types in Room 1. To choose the product type skylight operator, press highlight "Window". Press "Enter" to confirm your choice. Group 1 created in Room 1 he display shows that Group 1 has been created in Room 1. Room 1 Window No. 1 No. 2 No. 3 No. 4 Information Product from "Enter" to confirm your choice. "More" to move additional products to Group • P ress 1. You will return to the list in item 5. Repeat items 5-6 until these products have been moved to Group 1. Room 1 A Group created across more Rooms is shown in the display as a Zone. isplays a list of the individual products within the product type in question. to Enter Back P1 P2 ote: When operating Groups a delayed execution of commands might occur. If you want a particular product to respond at once, this product must be operated individually. ENGLISH VELUX 27 Naming Rename ou can change the name of House and the names of the automatically numbered Rooms, Zones, Groups, products and Programs into more personal names. The example shows how to change Room 1 into Kitchen. Room 1 ote: When you have used the function Rename, autoN matic renumbering is disabled. Press Scroll through the menus: Press Press to highlight the character required. "Enter" after each character. Back P1 P2 Locate P1 P2 Save KITCHEN ave the new name by choosing in the list when the last character has been entered. "Enter". Press CDEFGHI Enter P1 JK Back P2 Rename Displays a list with House, Room, Zone, Group and Product. Press Press JKLMNO Rename Menu Information Rename GHI Enter No. 1 Window "Menu". House settings Enter the new name using the list of characters. to highlight "Room". "Enter" to confirm your choice. Room Zone Group Product Enter Back P1 P2 he display shows that the new name has been saved. Saved Area Room 1 Room 2 Room 3 isplays a list of the names automatically given to the Rooms. Press Press to highlight "Room 1". "Enter" to confirm your choice. Enter Back P1 P2 Rename Room 1 A ABCDEFGHI isplays a list of characters including the save function the delete function and the space character 28 VELUX ENGLISH Enter Back P1 P2 ENGLISH VELUX 29 Programs My program A program contains a sequence of commands on how and when the products are to be operated. There are three different program types: • M y program A personal program that will be activated automatically without using the remote control. For instance you can record a morning program to run up the roller shades in the bedroom and open the skylights between 7 and 7.15 am on weekdays from October to April. • P rogram under Shortcut P1/P2 A personal program that can be activated by using the shortcut keys. For instance you can record and save a program under shortcut key P1 to close all skylights in the house and draw all blinds down by 50%. My program is an automatically activated program which contains a sequence of operating commands for one or more products. The sequence is automatically activated at a pre-set time within a period defined by a starting date and an end date. The example shows how to program skylight No. 1 (indicated as "Window" in the remote display) to open at 6.30 pm and close again at 10.00 pm each Monday for 12 months. Press House No. 1 Window Menu "Menu". Scroll through the menus: Program settings Record My program ote: If the current time and date has not been set already, please do so before choosing "My program", see section Time and date. • S ynergy program A pre-defined program for control of exterior sunscreening products optimised for the European countries and based on local conditions. Locate ocate the skylight. The relevant product can be identiL fied by pressing for a short period of time. This will activate the product briefly. "Select" to choose the product. Press house Window No. 1 No. 2 No. 3 Select Back P1 P2 house Window he display shows the selected product. "Enter" to confirm your choice. • Press • Press "Edit" to select additional products from the list. No. 1 Enter Edit P1 P2 Position Set position Save position 30 VELUX ENGLISH ress Press to highlight "Set position". "Enter" to confirm your choice. ENGLISH Enter Back P1 P2 VELUX 31 My program Set day Set Position Monday 100% open ress to set the opening position of the skylight. 100% corresponds to fully open. Press "Enter" to confirm your setting. Enter Back P1 P2 11 he display shows the chosen day of the week. "Enter" to confirm your choice. • Press • Press "Edit" to return to item 10 in case of additions or changes. Enter Edit P1 P2 Position Set position Save position ress Press to highlight "Save position". "Enter" to confirm your choice. Save Enter Back P1 P2 12 he display shows various options. to highlight "Add functions" to set the closing Press position of the skylight plus the day and time for closing. Press "Enter" to confirm your choice. Save program Add functions Cancel recording Enter Back P1 P2 Set time 0 0:30 pm ress to set the time for the skylight to be opened. First choose minutes. Press "Enter" to change to hours. Enter Back P1 P2 House Window 13 Set time No. 1 he display shows the latest selected product. "Enter" to continue. Press Repeat items 5-11, only this time applied to the closing settings. Enter The display shows various options. to highlight "Add functions" to add add• Press itional operating commands for the skylight or other products to the program. "Enter" to return to item 13. Press • Press to highlight "Save program" to save the program as it is. Press "Enter" to save the program. Save program Add functions Cancel recording Edit P1 P2 0 6:3 0 pm ress Press to set hours. "Enter" to confirm your setting. Enter Back P1 P2 Set day to select the day of the week for the skylight 10 Ptoress be opened. Press 32 VELUX "Select". ENGLISH Monday Tuesday Wednesday Thursday Select Back P1 P2 14 ENGLISH Save Enter Back P1 P2 VELUX 33 My program Information Rename 15 The display automatically suggests the name "My program 1". "Enter" to save the name. Press Follow the instructions in section Naming to change this name. Save My program 1 ABC DEFG HI Enter Back P1 he display asks whether to enable the program or to keep it disabled. to highlight "Enable". Press Press "Select" to confirm your choice. he display shows that My program 1 is enabled in the chosen period. P2 my program 1 16 19 My program 1 enabled from 2008.01.01 to 2008.12.31 Enable Disable Select Back P1 P2 Choose "Enable" under menu item Program settings to get a full list of all recorded programs that can be activated automatically. The list comprises both enabled and disabled programs. The enabled programs have been ticked and the disabled programs can be enabled any time you want. Note: For solar products, automatically activated programs may result in a quick discharge of the battery due to frequent operation of the products. Set starting and end date to enable the program. Set date Starting date 2008.01.01 Starting date: 17 Press Press "Edit" to choose a starting date. "Enter" to confirm your setting. Enter Edit P1 P2 Set date End date 2008.12.31 End date: 18 ress Press 34 VELUX "Edit" to choose an end date. "Enter" to confirm your setting. ENGLISH Enter P1 Edit P2 ENGLISH VELUX 35 Program under Shortcut P1/P2 A program under Shortcut P1/P2 contains a sequence Set Position of operating commands for one or more products. The sequence is activated by pressing shortcut key P1 or P2. You can record up to eight programs, four under each of the shortcut keys. The programs can be set to be executed immediately, with a delay or at a certain time. 100% open ress to set the opening position of the skylight. 6 P100% corresponds to fully open. Press he example shows how to program skylight No. 1 (indicated as "Window" in the remote display) to open immediately and close again after 1 hour and 30 minutes (delay) by a single pressure on shortcut key P1. P1 P2 Position Set position Save position No. 1 Window Locate "Menu". ress Press to highlight "Save position". "Enter" to confirm your choice. Enter Back P1 P2 Scroll through the menus: Program settings Record Shortcut P1/P2 ote: If the current time and date has not been set alN ready, please do so before choosing "Shortcut P1/P2", see section Time and date. Back House Menu Press "Enter" to confirm your setting. Enter ocate the skylight. The relevant product can be identiL fied by pressing for a short period of time. This will activate the product briefly. Press "Select" to select the product. he display shows the selected product. • Press "Enter" to confirm your choice. • Press "Edit" to select additional products from the list. House Window No. 1 No. 2 No. 3 Time control Select Back P1 P2 he display shows two time setting options. 8 TPress to highlight "Delay", ie the time that will pass from pressing P1 till the product will be activated. Press "Enter" to confirm your choice. Delay Starting time Enter Back P1 P2 House Window delay No. 1 Enter Edit P1 P2 ress to set the relevant delay. First choose minutes. 9 PChoose 0 minutes if you want the skylight to open immediately. Press "Enter" to change to hours. 00 h 00 min Enter Back P1 P2 delay Position Set position Save position ress Press 36 VELUX to highlight "Set position". "Enter" to confirm your choice. ENGLISH 00 h 00 min Enter Back P1 P2 ress 10 PPress to set hours. "Enter" to confirm your setting. ENGLISH Enter Back P1 P2 VELUX 37 Program under Shortcut P1/P2 delay Save 11 he display shows various options. to highlight "Add functions" to set the closing Press position and time of the skylight. Press "Enter" to confirm your choice. Save program Add functions Cancel recording Enter Back P1 P2 00 h 30 min 16 ress Press to set the delay. First choose minutes. "Enter" to change to hours. Enter Back P1 P2 delay House Window 01 h 30 min No. 1 12 he display shows the latest selected product. "Enter" to continue. Press Enter Edit P1 position ress Press to highlight "Set position". "Enter" to confirm your choice. to set hours. "Enter" to confirm your setting. P2 Back P1 P2 display shows various options. 18 T• he to highlight "Add functions" to add addPress Set position Save position 13 17 ress Press Enter Enter Back P1 P2 itional operating commands for the skylight or other products to the program. Press "Enter" to return to item 12. • Press to highlight "Save program" to save the program as it is. Press "Enter" to save the program. Set position Save Save program Add functions Cancel recording Enter Back P1 P2 0% open 14 ress to set the closing position of the skylight. 0% corresponds to fully closed. Press "Enter" to confirm your setting. Rename Enter Back P1 P2 Time control 15 he display shows two time setting options. to highlight "Delay", ie the time that will pass Press from pressing P1 till the product will be activated. Press "Enter" to confirm your choice. 38 VELUX ENGLISH 19 he display automatically suggests the name "Shortcut 1". "Enter" to save the name. Press Follow the instructions in section Naming to change this name. Delay Starting time Save Shortcut 1 ABC Enter P1 DEFGHI Back P2 Information Enter Back P1 P2 20 The display shows that Shortcut 1 has been saved. ENGLISH Shortcut 1 saved under P1/P2 VELUX 39 Program under Shortcut P1/P2 Interrupting a program under Shortcut P1/P2 Activating a program under Shortcut P1/P2 ou can activate any one of the personal shortcut programs by pressing the shortcut key P1 or P2. You can still use the various functions of the remote control at the same time as one or more programs have been activated. Icon indicates that a program has been activated. A shortcut program in progress can be interrupted as follows: House elow four shortcut programs have been recorded under shortcut key P1. The example shows how to activate the program under Shortcut 3 via shortcut key P1. No. 1 Window House ress P1 three times to activate the program under Shortcut 3. Note: Max time interval between each key pressure: 2 seconds. Otherwise the shortcut program that happens to be highlighted will be activated. Press P1 or P2 to find the shortcut program in progress. No. 1 Window Menu Locate P1 P2 Menu Locate P1 P2 shortcut p1 The activated shortcut program has been ticked. Press Press to highlight the program in question. "Stop" to interrupt the program. Shortcut 1 Shortcut 2 Shortcut 3 Shortcut 4 Stop Back P1 P2 shortcut p1 Shortcut 1 Shortcut 2 Shortcut 3 Shortcut 4 hortcut 3 is highlighted in the display and the program automatically starts. 40 VELUX ENGLISH Start Back P1 P2 ENGLISH VELUX 41 Time and date Keypad lock Time and date must be set manually the first time the remote control is to be used. The time and date format can be set in item 4 by choosing "Set format". House he example shows how to set the time. The date is set correspondingly by choosing "Date" in item 3. Press Scroll through the menus: User settings ress Press No. 1 Window Menu "Menu". The keypad can be locked so that products cannot be operated without unlocking the keypad. The stop key can still be used. Locate Time and date Time and date to highlight "Clock". "Enter" to confirm your choice. Clock Date Enter Back P1 P2 to highlight "Set time". "Enter" to confirm your choice. Scroll through the menus: Time ress Press Press "Menu". User settings No. 1 Window Menu Locate P1 P2 Keypad lock Keypad lock Set time Set format House Enter Back P1 P2 Disable Enable ress to highlight "Enable". Press "Enter" to confirm your choice. The keypad lock is immediately activated. Enter Back P1 P2 Set Time Using the keypad even if it is locked: 11: 0 0 a m ress Press to set minutes. "Enter" to change to hours. ress Press to set hours. "Enter" to confirm your settings. Enter Back P1 P2 Set Time ime is shown automatically when the remote control is in sleep mode. See section Display. 42 VELUX ENGLISH essage as shown. "Menu". Press "Locate". Press The keypad has temporarily been unlocked. The keypad will automatically be locked again 20 seconds after it has been used. Keypad lock Menu P1 Press Menu and then Locate Locate P2 11: 0 0 a m Enter Back P1 P2 ote: The keypad lock can be deactivated by choosing "Disable" in item 3. ENGLISH VELUX 43 Display Display light Sleep mode In standard settings, the light in the display is turned on when the keypad is activated and turned off again after 20 seconds. If you do not want any light in the display and you want to prolong the battery lifetime, you can opt out of this. The example shows how to turn off the light in the display. Press "Menu". House The life of the batteries can be prolonged by setting the remote control to go into sleep mode. When it has been set to go into sleep mode, the light in the display will be turned off 20 seconds after the latest key pressure. Time is shown. No. 1 Window Press any key to activate the remote control again. However, the stop key can be used at any time. Menu Locate P1 P2 Scroll through the menus: User settings Display Display Display light Sleep mode ress Press to highlight "Display light". "Enter" to confirm your choice. Enter P1 The example shows how to set the remote control to go into sleep mode. Press No. 1 Window Menu "Menu". Scroll through the menus: User settings Display Back P2 House 3 Press Press to highlight "Sleep mode". "Enter" to confirm your choice. Display Display light Sleep mode Enter Back P1 P2 Display light Sleep mode On Off ress Press to highlight "Off". "Enter" to confirm your choice. ote: The light in the display can be turned on by choosing "On" in item 4. Locate On Off Enter Back P1 P2 Press Press to highlight "On". "Enter" to confirm your choice. Enter Back P1 P2 03:43 am When the remote control is in sleep mode, time is shown. Note: Choose "Off" in item 4 if you do not want the remote control to go into sleep mode. 44 VELUX ENGLISH ENGLISH VELUX 45 Rearranging order ou can rearrange the order of the individual products, Groups, Rooms and Zones displayed. In the example, three Rooms have been created. It shows how to rearrange the order of the roller shades (indicated as "Blind" in the remote display) in Room 2. isplays a list of the individual products of the chosen product type. The individual products can be identified by pressing for a short period of time. This will activate the product briefly. to highlight the product in question. Press Press "Enter" to confirm your choice. Rearrange order No. 1 No. 2 No. 3 Enter Back P1 P2 Room 1 Rearrange order No. 1 Window Menu Press Scroll through the menus: "Menu". House settings P1 Rearrange order Locate P2 Product Rearrange order isplays a list of the Rooms created containing the prodD ucts in question. Press to highlight the Room in which the order of the individual products is to be rearranged. Press "Enter" to confirm your choice. Room 1 Room 2 Room 3 Enter Back P1 P2 he list of the individual products of the chosen product type is still displayed. to move the chosen product. Press Press "Enter" to confirm the rearranged order. he display asks whether the order of more products is to be rearranged or whether the changes made until now are to be saved. • Press "More" to rearrange the order of more products. You will return to the list in item 5. Repeat items 5-7 until the required order of products has been obtained. • Press "Save" to save the rearranged product order. No. 1 No. 3 No. 2 Enter Back P1 P2 Information Save new order or rearrange more products Save More P1 P2 Information Rearrange order Displays a list of the product types in Room 2. Press to highlight the product type where the order of the individual products is to be rearranged. Press "Enter" to confirm your choice. 46 VELUX ENGLISH Window Blind Enter Back P1 P2 Order rearranged The display shows that the order has been rearranged. ENGLISH VELUX 47 Access code Software version You can choose a personal access code to protect your personal settings, for instance against unintentional deletion of programs. The access code must consist of four digits from 0 to 9. Press Scroll through the menus: "Menu". User settings ress Press When addressing technical inquiries to VELUX, you will be asked to provide the version number of the software in the remote control. To find this proceed as follows: House No. 1 Window Menu Locate P1 P2 Access code Access code to highlight "Select/Change". "Enter" to confirm your choice. Select / Change Delete Room 1 Enter Back P1 P2 Access code ress Press Press to choose the first digit. "Enter" to go to the next digit. "Enter" when the last digit has been chosen. Enter code 1 *** Enter Back P1 P2 No. 1 Window Press Scroll through the menus: "Menu". System settings Menu Locate P1 P2 Software version software version Access code Confirm code 1 2 3 4 Press "Save" to confirm and save the code. Save Back P1 P2 004.000.000.076 he display shows a code, for instance 004.XXX.XXX.XXX. The first three digits are the version number. Press "Back" to return to the previous menu. Back P1 P2 System settings Copy system Security key Configure Software version very time you now choose Menu, you must enter the acE cess code before you can proceed. ote: The access code can be cancelled by choosing "Delete" in item 3. 48 VELUX ENGLISH The display shows the previous menu. ENGLISH Enter Back P1 P2 VELUX 49 Clearing remote control settings When clearing the remote control settings, all personal settings for eg Rooms, Zones, Groups and Programs and all personal names are deleted. The products, however, remain registered in the remote control. Room 1 No. 1 Window Menu Press Select the submenu: "Menu". Locate P1 P2 House settings House settings isplays a list of menu items. to highlight "Clear". Press Press "Enter" to confirm your choice. Group Rearrange order Rename Clear Enter Back P1 P2 Clear he display asks whether you want to clear all Groups, Rooms, Zones, Programs and personal names you might have created. "Yes" to confirm your choice. • Press • Press "No" to cancel your choice. Clear all Groups/ Rooms/Zones/ Programs/Names Yes P1 No P2 The remote control settings are cleared. 50 VELUX ENGLISH ENGLISH VELUX 51 Registering new products When a new additional product has been installed, it can be registered in a remote control already in operation. This new product can for instance be another skylight, a Venetian blind or a roller shade. Information The example shows how to register a new roller shade (indicated as "Blind" in the remote display) in the remote control and place it in Room 1. Now the product must be placed. 7a repare the product for registration. Disconnect the main power supply for 1 minute and then reconnect it. The product can now be registered in the remote control within the next 10 minutes. 7b House No. 1 Window ress ation. "Menu" in the remote control already in oper- Menu Locate P1 P2 System settings System settings Register product Copy system Security key Configure to highlight "Register product". "Enter" to confirm your choice. Enter Back P1 P2 Auto set-up Registration is running. This can take up to two minutes. 52 VELUX ENGLISH House No. 1 Blind If no Rooms have been created, the product is automatically placed in House. Operation can start. If Rooms have been created, the product has to be placed in the appropriate Room. The display shows a list of new products. The individual for a short products can be identified by pressing period of time. This will activate the product briefly. to highlight the product to be placed. Press Press "Enter" to confirm your choice. Menu Locate P1 P2 New products Blind No. 1 Enter P1 P2 Place in Select the submenu: ress Press he display shows that the new product has been regisT tered. New products registered isplays a list of the Rooms created. to highlight the Room in which the product is Press to be placed. Press "Enter" to confirm your choice. Room 1 Room 2 New Room Enter Back P1 P2 Information he display shows that the Room has been modified. Operation can start. Room modified here more than one remote control is used, new prodW ucts can also be operated with these. To do this, register the new products in each remote control by repeating items 2-9 for each of them. ENGLISH VELUX 53 Using additional activation controls Products and remote control settings can be copied from one remote control to another. Copying depends on whether the remote control to be copied to is new or already in operation. • C opying to a new remote control How to copy the contents from one remote control to another remote control not yet in operation. • Copying to a remote control in operation How to copy the contents from one remote control to another remote control where the two remote controls have not registered the same products. Note: When copying between two VELUX remote controls, all registered products and personal settings are copied, apart from personal programs that cannot be copied. 54 VELUX ENGLISH ENGLISH VELUX 55 Copying to a new remote control Step 2: Register products in remote control B You can copy the contents from a remote control already in operation to a new one so that the latter can also operate the products registered. The example shows how to copy the products and the personal settings from a remote control A in operation to a new remote control B not yet in operation. Insert the three batteries supplied (type AA, 1.5 volt) into the remote control as shown. Language Step 1: Prepare remote control A for copying Select the submenu: Menu "Menu". Locate P1 P2 ress "Register" to start registration of each product. Please disregard the information in the display. Prepare products for registration and press Register within 10 minutes Register Info The display now indicates that copying is in progress. System settings System settings Register product Copy system Security key Configure Enter Auto set-up House No. 1 Window Press he language chosen in remote control A is automatically chosen for remote control B. "Enter". Press Eesti English Español Français ress Press to highlight "Copy system". "Enter" to confirm your choice. Enter Back P1 P2 emote control B can now operate the same products as remote control A. tep 2 must now be completed within the next two minS utes. 56 VELUX ENGLISH ENGLISH VELUX 57 Copying to a remote control in operation If you have two remote controls with different products registered in them, you can copy the contents from one to the other and vice versa. Then all products can be operated with both remote controls. The example shows how to copy the products from remote control A to remote control B and at the same time maintain the settings and the programs of both remote controls. Note: With the shown procedure, only the products are copied from remote control A to remote control B and vice versa. If you want an exact copy of remote control A with all personal settings such as Names, Rooms and Groups, you must proceed differently after step 2. First reset remote control B, see section Resetting the remote control. Then copy from remote control A as described in section Copying to a new remote control. Step 1: Change security key in remote controls A and B Change the security key in both remote controls so that they have the same security key, see section Security key. Step 2: Register the products in remote control A Register all products in remote control A by choosing: Menu System settings Register product If in doubt, see section Registering new products. Remote control A can now operate both the products from remote control B and the products it could already operate. Step 3: Register the products in remote control B Register all products in remote control B by choosing: Menu System settings Register product Remote control B can now also operate both the products from remote control A and the products it could already operate. After this both remote controls can operate all products. 58 VELUX ENGLISH ENGLISH VELUX 59 Security key Each remote control and each product have a security key. To allow for communication between remote control and products, they must have the same security key. This also ensures that external activation controls cannot communicate with the products and thus operate the products unintentionally. he example shows how to change the security key in remote control A and in the products registered in A (step 1). If you have more than one remote control, the new security key must also be transferred to these (step 2). House Step 1: Change security key in remote control A Press Scroll through the menus: Menu "Menu". System settings Locate Security key ress to highlight "Change". Press "Enter" to confirm your choice. The display now indicates that the security key has been changed. he display asks whether the security key of other remote controls is to be changed. "No" to finish if this is the only remote control • Press being changed. • Press "Yes" if there are other remote controls. Execute step 2 for these. 60 VELUX ENGLISH No. 1 Window Menu Press Scroll through the menus: Locate "Menu". System settings Security key Security key House tep 2: Change security key in remote control B (and other) No. 1 Window Security key Change Receive Enter Back P1 P2 ress Press to highlight "Receive". "Enter" to confirm your choice. The display indicates that the security key is being transferred from remote control A to remote control B. Change Receive Enter Back P1 P2 Change Change security key in another remote control Yes No ENGLISH VELUX 61 Resetting and preparing for registration Resetting the remote control The remote control can be reset to its initial factory settings if you want to delete all registered products and all programming and start afresh. The skylight can be reset to its initial factory settings and then be prepared for registration. o reset the skylight, make sure that it has been closed by inserting a pointed object in the skylight operator cover hole marked A and pressing briefly. hen the skylight is closed, press with a pointed object through the operator cover hole marked A for at least 5 seconds. The skylight operator and other electrical products connected to the skylight will run briefly back and forth indicating that they are ready to be registered. ote: A reset removes the connection between the skylight with its electrical products and all remote controls. Therefore the products cannot be operated until they have been registered in a remote control again. To reinstate the connection between product and remote control after reset, please refer to the instructions in section Initial set-up. Slide off the battery cover as shown. ress the button on the right side of the remote control with a pointed object for at least 5 seconds. Replace the battery cover. min 5 sec Information ress "Yes" to confirm that you want to reset the remote control. The remote control will be reset. Continue? Yes No he remote control has now been reset. To reinstate the connection between remote control and products, please refer to the instructions in section Initial set-up. 62 VELUX ENGLISH ENGLISH VELUX 63 Adjusting the opening The skylight can be adjusted to two different openings, depending on the installation height. By default the opening is about 12" (300 mm), but for in-reach applications where the skylight is installed less than 8 ft. (2.5 m) from the floor, the shorter 4" (100 mm) opening must be used. hen the skylight is closed, press with a pointed object through the operator cover hole marked A for at least 5 seconds. The skylight operator and other electrical products connected to the skylight will run briefly back and forth indicating that they are ready to be registered. o change the opening, reset the skylight as described in items 1 and 2 in section Resetting and preparing for registration. isconnect the main power supply for more than 60 seconds. Reconnect the power, insert a pointed object in the skylight operator cover hole marked B and press for at least 10 seconds or until the skylight opens. Button B must be pressed within 30 seconds of reconnecting power. The skylight will open to the opening that was already set in the skylight operator. Note: The same procedure applies to a change of opening from in-reach to out-of-reach applications. min 5 sec o reinstate the connection between skylight and remote control, register the skylight with its electrical products in the remote control again. Please refer to the instructions in section Initial set-up or Registering new products. min 10 sec hen the skylight stops, press briefly with a pointed object through operator cover hole marked B to change this opening to the alternative length. When the skylight has stopped at the desired opening, press briefly with a pointed object through operator cover hole marked A to accept the new opening setting. The skylight closes. 64 VELUX ENGLISH ENGLISH VELUX 65 Fitting of holder for remote control The remote control is provided with a wall-mounted holder, which can be fitted anywhere in your home. If required, the remote control can be fastened with screws to the holder. ote: Check that the remote control can operate the relevant products from the proposed position before it is fastened to the holder. it the back section to the wall with the two screws supF plied. lace the remote control in the front section. Clip the white strap around the assembled unit. Hook the assembled unit to the back section at the top. Ensure that the strap fits into the openings in the sides of the back section. Lock the unit into place at the bottom. Fix the unit with screw at the bottom. it the back section to the wall with the two screws supF plied. ook the front section onto the back section at the top, click it into place at the bottom and fix it with a screw. lace the remote control in the holder. It is secured by means of built-in magnets. 66 VELUX ENGLISH ENGLISH VELUX 67 Power failure / Mislaid remote control Maintenance Closing skylights Switch off the main power supply before proceeding! In case of power failure The chain can be disengaged by removing the plug in the center of the bottom sash and turning the screw, with the provided 2.5 mm hex key, clockwise until it stops. now and ice Remove snow and ice to allow melt water to drain off from and around the skylight. leaning the rain sensor Dirt on the rain sensor may cause operating problems. Therefore, it is recommended to clean the rain sensor with a soft wet cloth once or twice a year or when needed. Note: The chain can be re-engaged by executing the above procedure in reverse order. If the remote control has been mislaid The sash can be closed by inserting a pointed object in the operator cover hole marked A and pressing briefly. ote: A battery backup unit can be conN nected. Please contact VELUX for further information. 68 VELUX ENGLISH ENGLISH VELUX 69 Display symbols Display texts Batteries must be changed within 2 weeks (type AA, 1.5 volt). Automatic closing has been activated for the product in question. Automatic closing has been activated for one of the products in the remote control. Automatic registration of product(s) is running. Battery level low: The batteries in the remote control are running out of power. Blocked: Unknown object obstructs operation of product. Remove obstruction to obtain normal operation. Limited by rain sensor: It is raining and the rain sensor has been activated. You can disable the rain sensor temporarily and operate the skylight. Manual operation: The skylight has been opened manually. Close the skylight manually to allow for electrical operation. Operational defect: The product has stopped during operation. Check the product. Reduced power supply: The power supply to the product has been reduced. Limited operation. Operation of a product. The product or function requested has been ticked. A program has been activated. Slats/louvres of a decoration and sunscreening product can be tilted/turned from 0 to 100%. A decoration and sunscreening product can be drawn up/ down or opened/closed from 0 to 100%. A name can be saved, see section Naming. Deletion of character, see section Naming. Space character, see section Naming. 70 VELUX ENGLISH ENGLISH VELUX 71 Glossary Activation control: An object by which you can actively operate an electrical product by means of pressing one or several buttons/keys. Adjustment: VELUX electrical decoration and sunscreening products are not adjusted to the skylight size on delivery. When operated the first time, they will therefore run from bottom to top of the skylight or vice versa without interruption. After adjustment the product is ready for use. Configuration: See Preparation for registration. Memory: The following functions occupy the memory of the remote control: Room, Group, Rename and Programs. Use of these functions will reduce the total memory. Preparation for registration: A product must be registered in an activation control before it can be operated. When a new product is connected to main power supply, it will search for an activation control for 10 minutes. Product: A product, which can be operated with the remote control, such as a skylight, a roller shade or a Venetian blind. Registration: A product is registered in an activation control when the security key of the activation control is assigned to the product. Repeater: A unit increasing the range of the remote control. 72 VELUX ENGLISH ENGLISH VELUX 73
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18 Create Date : 2009:12:10 12:43:31+01:00 Metadata Date : 2009:12:10 12:43:37+01:00 Modify Date : 2009:12:10 12:43:37+01:00 Creator Tool : Adobe InDesign CS4 (6.0.4) Thumbnail Format : JPEG Thumbnail Width : 512 Thumbnail Height : 512 Thumbnail Image : (Binary data 22748 bytes, use -b option to extract) Instance ID : uuid:bd1a7270-4067-47c6-8e8b-2f72fd873cc2 Document ID : xmp.did:572A192672E5DE1194ABEFCEEA5D631D Original Document ID : adobe:docid:indd:3d94d51a-b22b-11dd-bdc0-e89b9fb8edc0 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:562A192672E5DE1194ABEFCEEA5D631D Derived From Document ID : adobe:docid:indd:3d94d51a-b22b-11dd-bdc0-e89b9fb8edc0 Derived From Original Document ID: adobe:docid:indd:3d94d51a-b22b-11dd-bdc0-e89b9fb8edc0 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:7E14BBEA7398DE11A7CCF4AED46F2271, xmp.iid:0AE660717598DE11A7CCF4AED46F2271, xmp.iid:562A192672E5DE1194ABEFCEEA5D631D, xmp.iid:572A192672E5DE1194ABEFCEEA5D631D, xmp.iid:582A192672E5DE1194ABEFCEEA5D631D, xmp.iid:592A192672E5DE1194ABEFCEEA5D631D History When : 2009:09:03 12:35:04+02:00, 2009:09:03 12:35:04+02:00, 2009:12:10 12:29:24+01:00, 2009:12:10 12:29:24+01:00, 2009:12:10 12:31:26+01:00, 2009:12:10 12:43:13+01:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /metadata, /;/metadata, /, / Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:450E5C4671BADB1180EB94CC397913AE, uuid:994B2AA28F69DB119C01CC16D2A99A56, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:DCB43E29CA28DE11A158F3F09272D9EF, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:764385B4C180DD11AFF99C6516A4BC4A, uuid:784385B4C180DD11AFF99C6516A4BC4A, uuid:744385B4C180DD11AFF99C6516A4BC4A, uuid:724385B4C180DD11AFF99C6516A4BC4A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:55848FEB624CDB119D0EB2492AB8264A, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:C1AB32DAB780DD11AFF99C6516A4BC4A, uuid:BFAB32DAB780DD11AFF99C6516A4BC4A, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:A59018E0EBA6DB118D8DE1CF1D57A0CC, uuid:A69018E0EBA6DB118D8DE1CF1D57A0CC, uuid:A79018E0EBA6DB118D8DE1CF1D57A0CC, uuid:2211B2C7D5ACDD11AE18DEB424FCA50C, uuid:7A4385B4C180DD11AFF99C6516A4BC4A, uuid:6A0E4546AB80DD11AFF99C6516A4BC4A, uuid:99A689640BAFDD118D4ADB5EA09C8E8E Manifest Reference Document ID : uuid:BB15DA17568D11DABE5C985CB5EB2284, uuid:984B2AA28F69DB119C01CC16D2A99A56, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:D9B43E29CA28DE11A158F3F09272D9EF, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:754385B4C180DD11AFF99C6516A4BC4A, uuid:774385B4C180DD11AFF99C6516A4BC4A, uuid:734385B4C180DD11AFF99C6516A4BC4A, uuid:714385B4C180DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:C0AB32DAB780DD11AFF99C6516A4BC4A, uuid:BEAB32DAB780DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:C2AB32DAB780DD11AFF99C6516A4BC4A, uuid:794385B4C180DD11AFF99C6516A4BC4A, uuid:690E4546AB80DD11AFF99C6516A4BC4A, uuid:BCAB32DAB780DD11AFF99C6516A4BC4A Doc Change Count : 45 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 37 Creator : Adobe InDesign CS4 (6.0.4)EXIF Metadata provided by EXIF.tools