VSN Technologies V360 360 Degree HD Camera User Manual FCC Part 15

Download:
Mirror Download [FCC.gov]
Document ID	2452735
Application ID	d71hIggXAeZaFHGF0ICntQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.75kB (934337 bits)
Date Submitted	2014-11-24 00:00:00
Date Available	2014-11-24 00:00:00
Creation Date	2017-10-20 09:32:52
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-20 09:32:52
Document Title	FCC Part 15
Document Creator	Acrobat PDFMaker 11 for Word
Document Author:	Brooke Copeland

Certification Exhibit
FCC ID: 2AA9WV360
IC: 11665A-V360
FCC Rule Part: 15.247, 15.407
IC Radio Standards Specification: RSS-210
ACS Project: 14-2101
Manufacturer: VSN Technologies, Inc.
Model: V360
User Manual
3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587
BASIC CARE
LEARN MORE
WARRANTY
TJ MARTELL FOUNDATION
THE V.360° IS DESIGNED FOR ACTIVE LIFESTYLES.
PROPER USE AND CARE OF THE V.360° IS
ESSENTIAL FOR OPTIMAL PERFORMANCE
TO KEEP THE CAMERA IN PROPER WORKING
ORDER, MAKE SURE THE BATTERY DOOR IS
PROPERLY INSTALLED TO PROVIDE A WATERTIGHT SEAL. FAILURE TO DO SO WILL RESULT
IN DAMAGE TO THE CAMERA.
TO LEARN MORE ABOUT YOUR V.360°
FEATURES AND SAFETY INFORMATION,
PLEASE VISIT WWW.V360LIFE.COM
FOR DETAILS REFER TO FULL WARRANTY
TERMS AND CONDITIONS FOUND AT
WWW.V360LIFE.COM/SUPPORT
GETTING SUPPORT
FOR A COPY OF THE WARRANTY TERMS &
CONDITIONS, PLEASE SEND YOUR REQUEST
TO: SUPPORT@VSNMOBIL.COM
VSN MOBIL IS A PROUD SUPPORTER AND
SPONSOR OF THE T.J. MARTELL FOUNDATION.
THE T.J. MARTELL FOUNDATION IS THE MUSIC
INDUSTRY'S LARGEST FOUNDATION THAT
FUNDS INNOVATIVE MEDICAL RESEARCH
FOCUSED ON FINDING CURES FOR LEUKEMIA,
CANCER AND AIDS. THE FOUNDATION SOURCES
AND SUPPORTS EARLY-STAGE RESEARCH
PROJECTS AIMED AT DEVELOPING MORE
EFFECTIVE CLINICAL TREATMENTS FOR
PATIENTS WHICH OTHERWISE MIGHT NOT BE
FUNDED. FOR MORE INFORMATION, PLEASE
VISIT WWW.TJMARTELL.ORG.
PLEASE VISIT WWW.V360LIFE.COM/SUPPORT
FOR DEVICE SUPPORT.
SOFTWARE UPDATES
TERMS AND CONDITIONS
CLEAN CAMERA WITH THE INCLUDED
MICROFIBER POUCH OR A SOFT CLOTH OR
TOWEL. THE USE OF CLEANING AGENTS
INCLUDING ISOPROPHYL ALCOHOL ARE
NOT RECOMMENDED.
TO ENSURE YOUR CAMERA HAS THE LATEST
FEATURES, VISIT WWW.V360LIFE.COM TO
DOWNLOAD AND INSTALL SOFTWARE UPDATES.
THE USE OF V360˚ IS SUBJECT TO
THE TERMS AND CONDITIONS FOUND AT
WWW.V360LIFE.COM/TERMSANDCONDITIONS
SD CARDS
LEGAL
STORAGE
ALL SD CARDS ARE NOT COMPATIBLE WITH THE
V.360° CAMERA. FOR BEST RESULTS, PLEASE USE
THE FOLLOWING SD CARD TYPES:
V.360˚ AND VSN MOBIL ARE TRADEMARKS OF
VSN TECHNOLOGIES, INC. IPHONE, IPAD AND
APP STORE ARE REGISTERED TRADEMARKS OF
APPLE INC. ANDROID AND GOOGLE PLAY ARE
TRADEMARKS OF GOOGLE INC. © 2014 VSN
MOBIL. ALL RIGHTS RESERVED.
CLEANING INSTRUCTIONS
FOR BEST RESULTS, STORE YOUR CAMERA
INSIDE THE INCLUDED MICROFIBER POUCH
AT ROOM TEMPERATURE IN A CLEAN AND
DRY AREA.
TYPE
SPEED
MICROSDHC
MICROSDXC
CLASS 10, UHS-1 OR HIGHER UP TO 128 GB
CLASS 10, UHS-1 OR HIGHER UP TO 128 GB
CAPACITY
P/N: QV360001A
QUICKSTART GUIDE
PLEASE READ THIS GUIDE BEFORE YOU
USE THIS PRODUCT.
USB 3.0 CHARGING PORT
SD CARD SLOT – A MICRO-SD CARD IS REQUIRED
FOR OPERATION.
INSERT SD CARD INTO SLOT. PRESS DOWN GENTLY
TO LOCK INTO PLACE
HDMI PORT – CABLE NOT INCLUDED. USE OF FERRITE
CORE HDMI CABLES IS HIGHLY RECOMMENDED
BATTERY:
- INSERT BATTERY WITH THE PULL-TAB FACING DOWN
- CHARGE FOR AT LEAST 2 HOURS PRIOR TO USE BY
CONNECTING THE SUPPLIED USB 3.0 CABLE
- YOUR CAMERA’S LED INDICATOR WILL TURN SOLID
GREEN WHEN CHARGING IS COMPLETE
BATTERY DOOR:
- TURN COUNTER CLOCKWISE TO UNLOCK
- TO ATTACH, TURN CLOCKWISE TO LOCK IT INTO PLACE
IMPORTANT: VERIFY THE BATTERY DOOR IS SEATED
PROPERLY TO ENSURE THE CAMERA’S WATERTIGHT
SEAL IS INTACT
INITIAL SET UP
CONNECT TO CAMERA
V.360° COMPANION APPLICATION
TO ESTABLISH A CONNECTION TO YOUR
CAMERA USING A SMARTPHONE OR TABLET:
THE V.360° APPLICATION CONTROLS YOUR
CAMERA VIA AN ANDROID™ OR IOS® SMARTPHONE OR TABLET.
LED INDICATOR
ASSEMBLY
TO GET STARTED, DOWNLOAD THE FREE V.360°
COMPANION APPLICATION FROM GOOGLE
PLAY™ OR THE APPLE APP STORE® AND INSTALL
IT ONTO YOUR DEVICE.
IT IS RECOMMENDED THAT YOU PERSONALIZE
YOUR CAMERA BY CHANGING THE DEFAULT
CAMERA NAME AND PIN AFTER INITIAL SETUP.
CAMERA ON/OFF
THE CAMERA WILL TURN ON AUTOMATICALLY
WHEN YOU CONNECT VIA THE V.360° APP.
TO TURN YOUR CAMERA OFF, TOUCH THE
GENERAL SETTINGS ICON ON YOUR APP AND
SLIDE THE SWITCH NEXT TO POWER OFF CAMERA
TO OFF.
(1) ENSURE THAT WIFI AND BLUETOOTH ARE
ENABLED WITHIN THE SETTINGS MENU ON
YOUR DEVICE.
(2) LAUNCH THE V.360° COMPANION APPLICATION. YOUR DEVICE WILL AUTOMATICALLY
SEARCH FOR AVAILABLE CAMERAS.
(3) TOUCH THE CAMERA’S ICON TO ESTABLISH
A CONNECTION VIA BLUETOOTH. THE
CAMERA LED WILL RAPIDLY BLINK GREEN
TO INDICATE THAT IT IS POWERING ON.
(4) WHEN CAMERA IS ON AND IN READY MODE,
THE LED WILL SLOWLY FLASH GREEN.
(5) WHEN PROMPTED, ENTER THE DEFAULT PIN
(0000) FOR YOUR CAMERA THE FIRST TIME
YOU CONNECT TO YOUR CAMERA.
(6) ONCE CONNECTED, THE APP WILL GUIDE
YOU THROUGH INSTRUCTIONS TO ESTABLISH
A CONNECTION TO YOUR CAMERA AS A WIFI
HOST.
(7) RE-LAUNCH THE V.360° APP AND TOUCH
THE CAMERA ICON TO EASABLISH A
CONNECTION VIA WIFI
HOME SCREEN LAYOUT
BACK BUTTON – TOGGLE TO PREVIOUS SCREEN
SHOTGLASS VIEW FINDER – TOGGLE LEFT/RIGHT
TO ROTATE, UP/DOWN TO SWITCH TO FLAT VIEW
MODE CAROUSEL – SCROLL LEFT/RIGHT TO SWITCH
BETWEEN VIDEO, PHOTO, BURST, TIME LAPSE, &
SURVEILLANCE MODES
SHUTTER BUTTON – START/STOP RECORDING,
CAPTURE PHOTOS
MODE SPECIFIC SETTINGS TAB
REMOTE CONTROL TAB – ACCESS TO CAMERA
CONTROLS/FEATURES
MEDIA GALLERY – DISPLAY STORED CONTENT
(VIDEOS & PHOTOS)
SD CARD - REMAINING PHOTOS/VIDEO RECORD TIME
SD CARD - STORED PHOTOS/VIDEO COUNTER
10
LIVE STREAM VIEWER – ON/OFF
11
CAMERA BATTERY LIFE INDICATOR
12
GENERAL CAMERA SETTINGS
12
11
10
* IMAGES ARE FOR REFERENCE ONLY.
FCC NOTICE
V.360 FCC ID: 2AA9WV360
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
FOR CLASS B DEVICES:
“NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help.”
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Warning: Changes or modifications to this device not expressly approved
by VSN Mobil could void the user’s authority to operate the equipment.
AVISO DE FCC
ESTE DISPOSITIVO CUMPLE CON LA PARTE 15 DE LAS REGLAS FCC.
LA OPERACIÓN ESTÁ SUJETA A LAS SIGUIENTES DOS CONDICIONES:
1) ESTE DISPOSITIVO NO PUEDE CAUSAR INTERFERENCIAS
PERJUDICIALES; Y
2) ESTE DISPOSITIVO DEBE ACEPTAR CUALQUIER INTERFERENCIA
RECIBIDA, INCLUYENDO INTERFERENCIA QUE PUEDA CAUSAR UN
FUNCIONAMIENTO NO DESEADO.
Este dispositivo ha sido probado y cumple con los límites para un dispositivo
digital clase B, conforme a la parte 15 de las Reglas FCC. Ver 47 CFR Sec.
15.105(b). Estos límites están diseñados para proporcionar una protección
razonable contra interferencias dañinas en las instalaciones residenciales. Este
equipo genera, utiliza y puede irradiar energía de radiofrecuencia y si no se instala
y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales
a las comunicaciones por radiofrecuencia. Sin embargo, no hay ninguna garantía
de que no habrá interferencias en una instalación determinada. Si el equipo causa
interferencia dañina a la recepción de radio o televisión, lo cual puede
determinarse encendiendo y apagando el aparato, se recomienda al usuario que
intente corregir la interferencia por uno o más de las siguientes medidas:
1) Reorientar o reubicar la antena receptora;
2) Aumentar la separación entre el equipo y el receptor;
3) Conectar el equipo a un tomacorriente de un circuito distinto al que está
conectado el receptor; o 4) Consulte al distribuidor o un técnico experimentado
en radio/TV para obtener ayuda.
EXPOSICIÓN RADIOELÉCTRICA
Este equipo cumple con los límites de exposición a la radiación de la FCC
determinados para un entorno sin supervisión. Este equipo se debe instalar y
operar a una distancia mínima de 20 cm entre el radiador y su cuerpo. Este
transmisor no se debe colocar ni operar con ninguna otra antena o transmisor.
Advertencia: Este dispositivo no está diseñado para ser cambiado o
modificado por el usuario. Cualquier cambio o modificación al dispositivo
anulará la garantía y podría anular la autoridad del usuario para utilizar este
dispositivo.
Industry Canada Notice
V.360
FCC ID: 2AA9WV360
IC: 11665A-V360
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RF Exposure
Cet équipement est conforme aux limites d’exposition aux rayonnements définies par la FCC pour un
environnement non contrôlé. Cet équipement est en contact direct avec le corps de l’utilisateur dans des
conditions normales de fonctionnement. Cet émetteur ne doit pas être co-localisé ni fonctionner
conjointement avec une autre antenne ou émetteur.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Brooke Copeland
Create Date                     : 2014:11:12 11:03:40-05:00
Modify Date                     : 2014:11:20 11:04:41-05:00
Subject                         : 
Language                        : EN-US
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:11:20 11:04:41-05:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:de4cc31b-a59d-4577-9a2c-6fac7b8ffaed
Instance ID                     : uuid:1af7b955-33a1-4401-85aa-6220b9a3c371
Format                          : application/pdf
Title                           : FCC Part 15
Description                     : 
Creator                         : Brooke Copeland
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Source Modified                 : D:20141112143213
Company                         : Advanced Compliance Solutions, Inc.
Page Layout                     : OneColumn
Page Count                      : 6
For                             : Claudio Ribeiro,
Bounding Box                    : -108 -300 274 -34
Container Version               : 11
Creator Version                 : 18

EXIF Metadata provided by EXIF.tools