VStarcam Technology C78-15 IP Camera User Manual

Shenzhen VStarcam Technology Co.,Ltd IP Camera

UserManual.wiki >

VStarcam Technology >

C78 15 User Manual HTML Version

User manual

Connectthedev i c e

Connect the power adapter to the camera, then

using network cable connect camera with WiFi

router. Check the network power indicator (yellow)

and network indicator (Orange).



Attention: Please use provided power plug to avoid damage.

Note: press the button on the bottom of the camera for 10

seconds can reset back to factory setting.

InstallAndroid/IOSAPP

1. Go to www.eye4.so download.

2. Search Eye4 in Google Apps Marketplace/App

Store to download.

3. Scan the UID code

GetanEye4account

1. Open Android/iOS APP, click register.

2. Enter the user name, password to complete

registration.

Addcamera

Click “+”, enter into camera add interface.input

camera ID

① Search: find the IP cameras

in the same WiFi network

as the mobile phone.

② Scan UID code: point the

phone camera to the UID

code, after a “bee” sound,

scan success.

③ Input the camera password: (default password:

888888)

④ Click Finish button, camera add success.

Deletecamera

Click More in camera setup, choose the camera list ,

then delete.

ViewVideo

Wait for a few seconds after camera added.

Camera status explanation

Connecting

Camera is connecting, due to the network

condition, connecting time requires

differently.

timeout connection timeout

offline

camera is offline, please check the

device connection.

Unknown

No data received, please refresh the

status.

Invalid ID Incorrect UID, please input again.

online

Device is connected, click to view the

video.



Videointerfacede s c ri p ti o n 

left/right cruise

UP/down cruise

Picture setting. Set image contrast, brightness,

and others.

Preset

Listen off Listen

Talk off Talk

Snapshot, can browse picture in [ video

picture]

Recording, videos can be viewed in [ video

picture]

Screen Rotation

Camerasetup

More---Camera setup----choose the camera

Connectcamerawirelessly

More>camera setup> WiFi setup, the system will

auto search the available WiFi signal, then choose

the correct WiFi, connect.

Unplug the network cable during the camera restart

process.

UseWindowsAPP

Please check on [www.eye4.so] for more

information

FCC Warning Statement

Changesormodificationsnotexpressly

approvedbythepartyresponsiblefor

compliancecouldvoidtheuser’sauthority

tooperatetheequipment.

Thisequipmenthasbeentestedandfound

tocomplywiththelimitsforaClassBdigital

device,pursuanttoPart15oftheFCCRules.

Theselimitsaredesignedtoprovide

reasonableprotectionagainstharmful

interferenceinaresidentialinstallation.This

equipmentgeneratesusesandcanradiate

radiofrequencyenergyand,ifnotinstalled

andusedinaccordancewiththeinstructions,

maycauseharmfulinterferencetoradio

communications.However,thereisno

guaranteethatinterferencewillnotoccurin

aparticularinstallation.Ifthisequipment

doescauseharmfulinterferencetoradioor

televisionreception,whichcanbe

determinedbyturningtheequipmentoff

andon,theuserisencouragedtotryto

correcttheinterferencebyoneormoreof

thefollowing

measures:

‐‐Reorientorrelocatethereceiving

antenna.

‐‐Increasetheseparationbetweenthe

equipmentandreceiver.

‐‐Connecttheequipmentintoanoutletona

circuitdifferentfromthattowhichthe

receiverisconnected.

‐‐Consultthedealeroranexperienced

radio/TVtechnicianforhelp.

RFExposureStatement

Theantennasusedforthistransmittermustbe

installedtoprovideaseparationdistanceofat

least20cmfromallpersonsandmustnotbe

Co‐locatedforoperatinginconjunctionwithany

otherantennaortransmitter.

VStarcam Technology C78-15 IP Camera User Manual

Shenzhen VStarcam Technology Co.,Ltd IP Camera

User manual

Navigation menu

Namespaces

Views

Navigation