VStarcam Technology T78-1 IP CAMERA User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2168835
Application ID	kjIrXNQPyxeew+uatezo1w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	64.91kB (811336 bits)
Date Submitted	2014-01-17 00:00:00
Date Available	2014-01-17 00:00:00
Creation Date	2014-01-14 07:18:04
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2014-01-14 07:18:04
Document Title	Users Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	微软用户

PnP IP/Network Camera
Quick Installation Guide
Pangolin T series
VStarcam, IP Camera Expert
一. Hardware installation
Please connect the IP camera and router via network cable.
And make sure that the Power indicator light of the router is on (yellow) and the Network Indicator light is
flashing (green).
Please use the provided power adapter. Unauthorized power adapter may damage
the IP camera.
Note: The IP camera can be reset to factory setting by pressing the reset button for 10 seconds. The reset
button can be found on the bottom of the camera.
二．View via Android mobile phone
1. Install the P2PCam264 software：Visit the URL: http://cd.gocam.so
via the phone web browser, and follow the instruction to download or scan the
QR code to download the PnP version software.
2.
2. " VsCam" will be shown on the phone 3.
desktop after success installation.
4.
3. Run the software and click “Add” to add
cameras.
Click “scan”, and then point the phone camera towards the UID sticker.
The UID can be found on the bottom of the camera or the warranty card. After a “beep” sound, the UID is
scanned successfully. Also you can click “search” to add cameras in the LAN.
The default password is: 888888; The default user is : admin
5. Click "camera" to view the live video.
6. WIFI Setup
Click the icon on the right of the camera to set the camera. click “Setting” and “Wifi Setting”, then the Router
SSID list will pop up. Click the right SSID, and input WIFI password, click "OK". Then unplug the camera's
network cable, the camera will restart, and auto connect to the WiFi.
Notes:
If the camera has Pan/Tilt function, users can slide up and down the video screen to control the camera.
三．View via iPhone
1. Install the VsCam software：Visit the URL: http://cd.gocam.so via the
phone web browser, and follow the instruction to download or scan the QR
code to download the PnP version software.
2.
4.
"VsCam" will be shown on the phone
desktop after success installation.
3.
Run the software and click “Add” to
add cameras
Click “Scan”, then scan the camera's UID.
Point iPhone camera towards the UID (The UID can be found on the bottom of the IP camera or the warranty
card). After a “beep” sound, the UID is scanned successfully. Also you can click search button to add
cameras in the LAN, or manually add a camera by pressing “+” button, to input the camera's UID and
password.
The default password is: 888888; The default user is : admin
5. Click "camera" to view the live video.
6.
WIFI Setup
Click the arrow icon of the online camera, press “WIFI Setting” label, then the Router SSID list will pop up.
Click the right router's SSID, and input WIFI password, click "Add". Then unplug the camera's network cable,
the camera will restart, and connect the WIFI automatically.
Notes:
If the device has Pan/Tilt function, users can slide up and down on the video screen to control the camera P/T.
四．View via PC
1． Visit http://cd.gocam.so to get a download link for PC client.
After installation this icon
will be shown on the desktop，double click it.
2． Click "Add Camera", to connect camera in LAN or in WAN.
Add cameras in LAN: click “Find” button and select the cameras.
Add cameras in WAN: Input UID (UID can be found on the bottom of the camera or warranty card)
Default password: 888888.
3． Click "OK" to confirm add camera.
"Set WiFi": can setup camera to be connected via WiFi.
4． Double click "IP Camera" icon to view the camera.
Warning
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile
configurations. The antennas used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.
Note：For more information, please refer to online CD: http://cd.gocam.so

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 9
Language                        : zh-CN
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Office Word 2007
Title                           : 网络摄像机快速安装指南
Creator                         : 微软用户
Creator Tool                    : Microsoft® Office Word 2007
Create Date                     : 2014:01:14 07:18:04Z
Modify Date                     : 2014:01:14 07:18:04Z
Document ID                     : 7521BAB2-D7CA-4B69-888B-A1B680AC2AE7
Instance ID                     : 7521BAB2-D7CA-4B69-888B-A1B680AC2AE7
Part                            : 1
Conformance                     : B
Author                          : 微软用户

EXIF Metadata provided by EXIF.tools