VTech Electronics 115300 Two Way Radio with FRS User Manual
VTech Electronics Limited Two Way Radio with FRS Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1302519 |
| Application ID | bYtZEY4CxyPTHaBSWp8ffw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 60.56kB (756972 bits) |
| Date Submitted | 2010-06-27 00:00:00 |
| Date Available | 2010-06-27 00:00:00 |
| Creation Date | 2010-06-22 14:27:24 |
| Producing Software | PDF-XChange Viewer [Version: 2.0 (Build 51.0) (May 17 2010; 12:49:38)] |
| Document Lastmod | 2010-06-25 18:30:31 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS3 (5.0) |
User’s Manual © 2010 VTech Printed in China 91-002479-000 READ THIS MANUAL CAREFULLY BEFORE OPERATING THIS PRODUCT FOR SAFE USAGE AND COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS To learn more about VTech® toys, visit www.vtechuk.com INTRODUCTION SAFETY INFORMATION RF EXPOSURE CONTROL GUIDELINES Your VTech® Text & Chat Walkie-Talkies™ contain a receiver and a low power transmitter. When the Talk Button is pressed, it sends out radio frequency (RF) signals. To control your exposure and ensure compliance with the RF exposure guidelines adopted by the Federal Communications Commissions (FCC), always adhere to the following procedures: • Press the Talk Button ONLY when you are speaking. • Release the Talk Button when you are not speaking. • Transmit (talk) no more than 50% of the time. When speaking, hold the Text & Chat WalkieTalkies™ in a vertical position with the microphone at least 2 inches (5 cm) away from your mouth. When sending messages, position the Text & Chat Walkie-Talkies™ antenna 2 inches (5 cm) from your body. WARNING: • Never use the Text & Chat Walkie-Talkies™ while driving or during any sporting activities as it may lead to accidents causing injuries. • Turn the Text & Chat Walkie-Talkies™ off in an aircraft or any facility where posted notices restrict the use of radios or cellular telephones. Hospitals or health care facilities may be using equipment that is sensitive to RF energy. • Never use the Text & Chat Walkie-Talkies™ where personal medical devices such as pacemakers or hearing aids are in use. Turn the walkie-talkies off immediately if there is any reason to suspect that interference is taking place. • Never use the Text & Chat Walkie-Talkies™ in front of a vehicle’s airbag. If the air-bag deploys, it could propel the walkie-talkie and cause injuries. Introduction/Safety Information Thank you for purchasing the VTech® Text & Chat Walkie-Talkies™! VTech® Text & Chat Walkie-Talkies™ are a pair of two-way radios loaded with lots of cool features! Customize your personal profile by choosing a cartoon face as your avatar. The walkie-talkies come equipped with text messaging, animated picture messaging, and card messaging with more than 70 preset messages. Enjoy funny lip-sync animations while chatting. Three built-in games help build concentration, observation and eye-hand coordination skills. PRODUCT FEATURES Product Layout and Buttons Talk Button On/Off Button Microphone Left/Right Buttons Home Button OK Button Game Button Mailbox Button Wish Message Button Gift Message Button Product Features • Never use the Text & Chat Walkie-Talkies™ or change the batteries in potentially explosive atmospheres as sparks in such areas could result in an explosion. • Never use the Text & Chat Walkie-Talkies™ in or near a mining facility which uses remotely triggered explosives or in areas labeled “Blasting Area.” Premature or accidental detonation may result. • Never attempt to modify or in any way increase the output power of the Text & Chat Walkie-Talkies™ as it may cause a violation of the technical regulations of Part 15 of FCC Rules. • Avoid exposing the Text & Chat Walkie-Talkies™ to water or extreme tempuratures. • Text & Chat Walkie-Talkies™ comply with FCC regulations for use in the United States and Canada. Use in other countries may be prohibited or restricted by local regulation. Please check with the local regulating agency before using this device outside of the United States or Canada. Card Message Button Emotion Message Button Feature Press this button to turn the unit on or off. Left/Right Buttons Press these buttons to make selections. Press both buttons together to enter the set-up menu. OK Button Press this button to confirm a choice or action. Mailbox Button Press this button to read the messages in your mailbox. Card Message Button Press this button to enter the Card Message menu. Emotion Press this button to enter the Emotion Message Message Button menu. Gift Message Button Press this button to enter the Gift Message menu. Wish Message Button Press this button to enter the Wish Message menu. Game Button Press this button to go to the Games menu. Home Button Press this button to enter walkie-talkie mode. Talk Button Press and hold this button when speaking. Release the button to listen. INCLUDED IN THIS PACKAGE • Two VTech® Text & Chat Walkie-Talkies™ • One instruction manual WARNING: All packing materials such as tape, plastic sheets, wire ties and tags are not part of this toy, and should be discarded for your child’s safety. Product Features & Specifications Button name On/Off Button PRODUCT SPECIFICATIONS • Up to 1 mile* range for chatting and messaging. • 4 chatting groups allow an unlimited number of members. • Ability to communicate with any FRS 2-way radio (For more details see the Communicating with Other FRS 2-way Radios section below.) • Ability to send animated picture messages with special sound effects. • 4 incoming message notification tones. • Mailbox for storing up to 15 messages. * Your Text & Chat Walkie-Talkies™ will achieve the maximum operating range when communicating in flat open areas with no trees or buildings to obstruct the signal. Under these ideal conditions, you may achieve range up to a one mile radius. The following conditions tend to reduce the range. • One or both walkie-talkies are being used indoors. • There are large obstructions such as buildings, trees, vehicles, hills, etc. between radios. • The batteries are running low. GETTING STARTED • Make sure the unit is turned OFF. • Locate the battery cover on the back of the unit. • Remove the battery cover and install 3 “AA” size batteries as illustrated. • Replace the battery cover. BATTERY NOTICE • The use of new alkaline batteries is recommended for maximum performance. • Non-rechargeable batteries are not to be recharged. • Rechargeable batteries are to be removed from the toy before being charged (if removable). • Rechargeable batteries are only to be charged under adult supervision (if removable). • Do not mix old and new batteries. • Do not mix batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Only batteries of the same or equivalent type as recommended are to be used. • Batteries are to be inserted with the correct polarity. • Exhausted batteries are to be removed from the toy. • The supply terminals are not to be short-circuited. • The toy is not to be connected to more than the recommended number of power supplies. • Do not dispose of batteries in fire. Getting Started Battery Installation Please Note: All messages in the mailbox will be deleted when the batteries are removed from the unit. To avoid damage to any system data, please do not remove the batteries while the unit is switched on. INITIAL SET-UP Press and hold the On/Off Button for 2 seconds to turn the unit on. When the unit is first turned on, you will be prompted to choose a language and avatar. Use the Left/Right Buttons to make your selections. Press the OK Button to confirm your selections. After the initial set-up, the unit will be active in the walkie-talkie mode. ON/OFF BUTTON Press and hold the On/Off Button for 2 seconds to turn the unit on. Press and hold the On/Off Button again to turn the unit off. SET-UP MENU Hold the Left/Right Buttons down at the same time for 2 seconds to enter the set-up menu. The set-up menu allows you to change your profile picture, group, language, mail alert sound, and volume. Press the Left/Right Buttons to make your selection. Press the OK Button to enter the submenu. Getting Started TO BEGIN USING THE TEXT & CHAT WALKIE-TALKIES™ Profile Setting There are 8 cartoon faces to choose from. Use the Left/ Right Buttons to choose your favorite cartoon face as your avatar. Press the OK Button to confirm. Group Setting To communicate, all the walkie-talkies in your group must be on the same channel and CTCSS code. There are 4 available groups. The default setting is Group 1. Use the Left/Right Buttons to change the group setting. Press the OK Button to confirm. Language Setting Use the Left/Right Buttons to choose a language. Press the OK Button to confirm. Mail Alert Setting Press the Left/Right Buttons to choose one of the 4 mail alert sounds. Press the OK Button to confirm. Volume Setting Press the Left/Right Buttons to adjust the volume. Press the OK Button to confirm. AUTOMATIC SHUT-OFF Getting Started To preserve battery life, the Text & Chat Walkie-Talkies™ will automatically turn off after 3 hours without input. ACTIVITIES You can chat with your friends when you are all registered in the same group. When you press the Talk Button , your group number will appear onscreen. Make sure you and all your friends are registered in the same group. If the group numbers are different, you will need to go to the SET-UP menu to change the group number. Avoid using the walkie-talkies closer than 6 feet apart. If they are used too closely they may produce echo or feedback noise. Press the Home Button to enter walkie-talkie mode. To begin speaking, first listen to hear if the channel is in use. If it is in use, wait until the conversation is finished. When the channel is available to use, press and hold the Talk Button . After you have heard the short “bleep” sound you can start speaking into the microphone. For best results, hold the unit 2 ~ 3 inches (5-8 cm) away from your mouth. Speak in a normal tone, do not whisper or yell into the microphone. Only one person can speak at a time. No one else can speak or send messages until the speaker has released their Talk Button Release the Talk Button when you’ve finished talking. You will hear another “bleep” sound to indicate you are now in listening mode. When there is no one speaking, your avatar will appear on the screen. When you are listening to someone else speaking, their avatar will appear and be animated on your screen so that you know who is speaking. You may want to switch groups to avoid interference by other users on the same channel. Remember to tell your friends when you change groups. If you are not in the same group, you will not be able to communicate with one another. Communicating with Other FRS 2-way Radios VTech® Text & Chat Walkie-Talkies™ comply with FRS standards and are able to communicate with other FRS 2-way radios. Check your current group number by pressing the Talk Button on your Text & Chat Walkie-Talkies™. Set the FRS channel and the CTCSS sub code of the other FRS 2-way radio according to the table below. Activities 1. Walkie-Talkie Mode Group Number FRS Channel Frequency (MHz) 462.5875 462.6375 462.6875 467.5625 CTCSS Sub Code 34 35 32 33 CTCSS Tone (Hz) 218.1 225.7 203.5 210.7 2. Messages Wish Messages: Choose a wish to send to your friends.Wishes are interactive messages. When you receive a wish message, blow into the microphone or press the OK Button when prompted to see a fun animation. Gift Messages : Choose a gift to send to a friend. Emotion Messages : Choose an emotion to show your friends how you are feeling. Card Messages : Choose an animated card to send to your friends. Sending Messages Press one of the message buttons to select the type of message you want to send. Press the Left/Right Buttons to choose a message. Press the OK Button to preview your message. After you’ve previewed the message, use the Left/Right Buttons to select the “√”. Press the OK Button to send your message. The message may take up to 30 seconds to send. Please note, when your unit is sending a message, you cannot receive messages at the same time. Receiving Messages When you receive a message, you will hear your mail alert sound and see a mail animation. You will be prompted to read your message, use the Left/Right Buttons to select the “√”. Press the OK Button to read your messages. Activities You can send and receive messages when you and your friends are in the same group. There are 4 types of messages to send, with over 70 ready-to-send messages to choose from. 10 3. Mailbox Received messages will be automatically saved in the mailbox. You will find your received messages with the avatar of the sender. Use the Left/Right Buttons to choose a message to read. Press the OK Button to read your message. After you have read the message, you will be prompted to delete the message. Use the Left/Right Buttons to choose the “√” to delete your message, or the ‘X’ to keep the message. Press the OK Button to confirm your answer. Only 15 messages can be stored in your mailbox at any given time. Be sure to delete any unnecessary messages in order to keep space for important messages. Unread messages will show , and read messages will show . Reminder: when the batteries are removed from the unit, all messages will be automatically deleted. There are 3 games included in your Text & Chat Walkie-Talkies™. Use the Left/Right Buttons to choose a game. Press the OK Button to start playing. Odd One Out Three pictures are shown on the screen. One of them is different from the others. The object of the game is to choose the odd one out. Use the Left/Right Buttons to select your answer. Press the OK button to confirm your selection. Activities 4. Games Quick Match Half a picture will appear on the left side of the screen. Find the other half to complete the picture. Use the Left/ to select your answer. Press the Right Buttons OK Button to confirm your selection. Hidden Ball Keep your eye on the ball! The ball will be hidden under one of the three cups. The cups will then be moved around. Can you guess where the ball went? Use the Left/Right Buttons to select your answer. Press the OK Button to confirm your selection. 11 Operating temperature is too cold This icon will appear when the operating temperature is too low. The unit will automatically power off. Operating temperature is too hot This icon will appear when the operating temperature is too high. The unit will automatically power off. System busy This icon will appear when the system is busy. Your message will be sent within 30 seconds. Low battery This icon will appear when the battery power is low. Please turn off the unit and replace the batteries. CARE & MAINTENANCE 1 Keep the unit clean by wiping it with a slightly damp cloth. Never use solvents or abrasives. 2 Keep the unit out of direct sunlight and away from direct sources of heat. 3 Remove the batteries when not using it for an extended period of time. 4 Avoid dropping the unit. NEVER try to dismantle it. 5 Always keep the unit away from water. Care & Maintenance Special Warning Icons 12 TROUBLESHOOTING Review this section if you experience difficulty operating the Text & Chat Walkie-Talkies™. Your Text & Chat Walkie-Talkies™ stop working or do not turn on You cannot chat with friends, send or receive messages Communication disturbed by unwanted signals Possible cause Correction Incorrect battery polarities Ensure that the batteries are installed correctly Weak batteries Replace with new batteries The operating temperature is out of the working range Do not use the unit in extreme temperatures You and your friends are not in the same group Check to make sure that all users are in the same group number The volume level is too low Increase the volume level The Talk Button is inadvertently being pressed Release the Talk Button The receiving signal is weak due to a large obstructing object Avoid operating the walkietalkies too far apart if there are large objects that will interfere with the signal Excessive radio interference on a particular channel Switch to another group Weak batteries Replace with new batteries Excessive radio interference on a particular channel Switch to another group Interference from electronic devices such as a computer or TV Turn the devices that may be interfering off or move farther away from the devices Troubleshooting Problem 13 The first or last word of a transmission is cut-off Incorrect use of the Talk Button Press the Talk Button, wait one second following the “bleep” sound to begin speaking After you have finished speaking, wait one second before releasing the Talk Button Voice distortion Volume level is too high Decrease the volume level Speaking too close or too loud Hold the unit 2~3 inches from your mouth Speak in a normal voice Echo or feedback noise The units are operating to close together Interactive messages are not working Blowing into the wrong spot or blowing too gently Keep the units at least 6 feet apart Decrease the volume level Blow toward the microphone or blow a little harder If you have a problem that cannot be solved by using this manual, we encourage you to visit us online or contact our Customer Services Department with any problems and/or suggestions that you might have. A support representative will be happy to assist you. Before requesting support, please be ready to provide or include the information below: • The name of your product or model number (the model number is typically located on the back or bottom of your product). • The specific problem you are experiencing. • The actions you took right before the problem occurred. Internet: www.vtechkids.com in the U.S., or www.vtechcanada.com in Canada Phone: 1-800-521-2010 in the U.S., or 1-877-352-8697 in Canada. Troubleshooting Do not whisper or yell into the microphone 14 Operating frequency 462.5875MHz (group 1) 462.6375MHz (group 2) 462.6875MHz (group 3) 467.5625MHz (group 4) 4 channels CTCSS (squelch tone) Group 1: #34, 218.1Hz Group 2: #35, 225.7Hz Group 3: #32, 203.5Hz Group 4: #33, 210.7Hz Transmitting output < 0.5W ERP Operating Temperature 0˚C - 35˚C or 32˚F -95˚F Power supply 4.5V (3 x 1.5V AA Battery) DISCLAIMER AND LIMITATION OF LIABILITY VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook. VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this software. VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of important data on other media to protect against data loss. Company: VTech® Electronics North America, L.L.C. Address: 1155 West Dundee Road, Suite 130, Arlington Heights, IL, 60004 USA Phone: 1-800-521-2010 in the U.S.,or 1-877-352-8697 in Canada. Technical Specifications TECHNICAL SPECIFICATIONS 15 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Other Info IMPORTANT NOTE: Creating and developing Preschool Learning™ products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800521-2010 in the U.S., or 1-877-352-8697 in Canada with any problems and/or suggestions that you might have. A service representative will be happy to help you. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS DEVICE COMPLIES WITH RSS-210 OF INDUSTRY CANADA.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA. 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Creator : Adobe InDesign CS3 (5.0) Modify Date : 2010:06:25 18:30:31+08:00 Create Date : 2010:06:22 14:27:24+08:00 Page Count : 16 XMP Toolkit : XMP Core 4.1.1 Instance ID : uuid:37c6486b-351a-4ed6-8c2b-5dc3d003e2cd Document ID : adobe:docid:indd:130fa3e3-7762-11df-a5d0-e6fa314c3185 Rendition Class : proof:pdf Derived From Instance ID : e37b8872-6c83-11df-9047-aaf82433f425 Derived From Document ID : adobe:docid:indd:25973bf7-58b7-11df-9361-94e2b8258744 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:74455C360B51DF11B11CFEAFD2DB922A, uuid:FCF7273D8959DF11A7BBA2A7E3BCE977, uuid:39A9D509325EDF119E23F88717BAD461, uuid:433AD10A0C51DF11B11CFEAFD2DB922A, uuid:39A9D509325EDF119E23F88717BAD461, uuid:028D291C8E5DDF119AA891F09571BDBD, uuid:4FFC41398E5DDF119AA891F09571BDBD Manifest Reference Document ID : uuid:73455C360B51DF11B11CFEAFD2DB922A, uuid:B65C7A3E8559DF11A7BBA2A7E3BCE977, uuid:38A9D509325EDF119E23F88717BAD461, uuid:423AD10A0C51DF11B11CFEAFD2DB922A, uuid:38A9D509325EDF119E23F88717BAD461, uuid:018D291C8E5DDF119AA891F09571BDBD, uuid:4EFC41398E5DDF119AA891F09571BDBD Metadata Date : 2010:06:22 14:27:27+08:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8874 bytes, use -b option to extract) Format : application/pdf Trapped : False Producer : PDF-XChange Viewer [Version: 2.0 (Build 51.0) (May 17 2010; 12:49:38)]EXIF Metadata provided by EXIF.tools