VTech Telecommunications 2230P2 AT&T; 2230 2.4 GHz Cordless Telephone User Manual 2230 book 1ATT

Download:
Mirror Download [FCC.gov]
Document ID	249280
Application ID	EpSPi859pLwtSYOc2fIurg==
Document Description	User guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.69kB (471082 bits)
Date Submitted	2002-06-13 00:00:00
Date Available	2002-07-26 00:00:00
Creation Date	2001-05-10 20:30:44
Producing Software	Acrobat Distiller 3.01 for Power Macintosh
Document Lastmod	0000-00-00 00:00:00
Document Title	2230_book_1ATT
Document Creator	QuarkXPressª 4.1: LaserWriter 8 8.1.1

2230_book_1ATT
5/10/01
8:25 PM
Page ii
USER’S MANUAL
Part 2
2.4 GHz Cordless Telephone 2230
with Caller ID/Call Waiting
REVISED
5/10/01
Please also read
Part 1 — Important
Product Information
AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
2230_book_1ATT
5/10/01
8:25 PM
Page iii
© 2001 Advanced American Telephones. All rights reserved.
Printed in China. Issue 1AT&T 05/01
2230_book_1ATT
5/10/01
8:25 PM
Page 1
CONTENTS
TO COME
2230_book_1ATT
5/10/01
8:25 PM
Page 2
2230_book_1ATT
5/10/01
8:25 PM
Page 3
BEFORE YOU BEGIN
About the Base and the Charger
This cordless product provides you with two cordless handsets, a base
station and a charger. You can charge either handset in the base or in the
charger. You’ll need to connect the base to both AC power and a modular
telephone jack. You’ll connect the charger to AC power only. For more
installation information, please see INSTALLATION in this User Manual.
About Caller Identification (Caller ID)
This product has a Caller ID with Call Waiting feature that works with
service from your local phone service provider.
Caller ID with Call Waiting lets you see who’s calling before you answer
the phone, even when you’re on another call.
You may need to change your phone service to use this feature. Contact
your phone service provider if:
• You have both Caller ID and Call Waiting, but as separate services
(you may need combined service)
• You have only Caller ID service, or only Call Waiting service
• You don’t subscribe to any Caller ID or Call Waiting services.
You can use this product with regular Caller ID service, and you can use
this product’s other features without subscribing to either Caller ID or
combined Caller ID with Call Waiting service.
There are fees for Caller ID services, and they may not be available in
all areas.
This product can provide information only if both you and the caller are
in areas offering Caller ID service, and if both telephone companies use
compatible equipment.
About Call History
This phone assigns each incoming call a number from 1 to 30. The most
recent call will have the lowest number. When the memory is full, the
oldest call information is deleted to make room for new incoming call
information.
If you answer a call before call information appears on the screen, it will
not be in the call history.
2230_book_1ATT
5/10/01
8:25 PM
Page 4
INSTALLATION
Connect the power cord to the base and an electrical outlet
not controlled by a wall switch.
Standard
electrical outlet
Modular
telephone
jack
Connect
the
telephone
line cord.
ART AND TEXT
FOR POSITION ONLY
STILL NEED INFORMATION
TO COMPLETE THIS SECTION
Use only the power cord supplied with this product.
If you need a replacement, call 1 800 222-3111.
Install the handset battery.
Use only AT&T Battery 2401, SKU# 91077.
a) Remove
battery
compartment
cover by
pressing on
indentation
and sliding
downward.
b) Place the battery pack in
the handset. Align the metal
contacts on the battery with
the contacts in the battery
compartment.
c) Replace cover by
sliding it on its
track up over
battery case until
it snaps firmly
into place.
2230_book_1ATT
5/10/01
8:25 PM
Page 5
INSTALLATION
Charge the handset battery.
• Place the handset in the base (or a remote charging stand,
purchased separately).
• Charge the battery at least 12 hours. After the first charge, the
battery will quick charge in only eight hours.
Check for dial tone.
• After the batteries are charged, lift the handset and press
P; you should hear a dial tone.
Belt Clip
Attach belt clip to the cordless handset (optional).
ART AND TEXT
FOR POSITION ONLY
STILL NEED INFORMATION
TO COMPLETE THIS SECTION
a) Slide down into
grooves to attach.
b) Push up and away
to remove.
Headset
You can use this telephone
hands-free when you install a 2.5
mm headset (purchased
separately).
Plug the headset into the jack
located on the left side of the
handset (under the small rubber
flap). Do not force the
connection, but make sure the
plug fits securely.
2230_book_1ATT
5/10/01
8:25 PM
Page 6
FEATURE SETUP
Feature Setup Menu
When you set features marked with * you are setting the feature for BOTH
handsets. All other features must be set separately at each handset.
Press
to return to the previous menu item.
NOTE: If you wait more than 30 seconds without pressing a key, the
handset returns to the standby screen.
Handset Volume
Adjusting handset volume will not affect the volume of what the other
party hears. Default setting is 3. You can also adjust volume during
conversation by pressing < or >.
1 Press S. The screen displays
>CALL LOG
PHONEBOOK
Press 2. The screen displays
Press S. The screen displays
Use the keypad to enter a volume setting (0 – 7)
— OR —
Press < or > to display desired setting.
Press S to save displayed setting.
>HANDSET VOLUME
RING VOLUME
>HANDSET VOLUME
Ring Volume
Adjust the volume of the handset ringer. Setting volume to 0 turns the
ringer off. Default setting is 3.
1 Press S.
2 Press 3. The screen displays
>RING VOLUME
RING PATTERN
Press S.
2230_book_1ATT
5/10/01
8:25 PM
Page 7
FEATURE SETUP
Use the keypad to enter a volume setting (0 – 6)
— OR —
Press < or > to display desired setting.
Press S to save displayed setting.
Ring Pattern
The external ring pattern sets which ringer you hear when you have an
outside call. The internal ring pattern sets which ringer you hear when you
have an intercom call from the other handset. External ring pattern default
setting is 0; internal ring pattern default setting is 1.
1 Press S.
2 Press 4. The screen displays
>RING PATTERN
AUTO ANSWER
Press S.
Press > then S to set EXT RING PATTERN or INT RING
PATTERN.
Use the keypad to enter a ring pattern selection (0 – 9)
— OR —
Press < or > to display desired setting. A sample of the displayed
setting is played briefly.
Press S to save displayed setting.
Auto Answer
When this feature is on, an incoming call is connected when you lift the
handset from the base or the charger (you don’t have to press P). If
the handset is not in the base or charger, you do have to press P to
answer a call, regardless of the setting. The default setting is OFF.
1 Press S.
2 Press 5. The screen displays
>AUTO ANSWER
KEY CLICK
Press < to turn ON.
— OR —
Press > to turn OFF.
Press S to save the displayed setting.
2230_book_1ATT
5/10/01
8:25 PM
Page 8
FEATURE SETUP
Key Click
When this feature is on, each key press makes a sound, except when the
keypad is locked. Default setting is ON.
1 Press S.
2 Press 6. The screen displays
>KEY CLICK
KEY LOCK
Press S.
Press < or > to display ON or OFF.
Press S to save the displayed setting.
Key Lock
When this feature is on, the keypad cannot be used to dial calls. You can
still answer calls, but when the call is ended, the keypad lock is reactivated.
The key lock icon is displayed on the screen when this feature is activated.
The default setting is OFF.
NOTE: To make an emergency call when the keypad is locked, press
P then 9 1 1. When the call is ended, the keypad lock is
reactivated.
Press S.
Press 7. The screen displays
Press S.
Press < or > to display ON or OFF.
Press S to save the displayed setting.
>KEY LOCK
HANDSET NAME
Disable Key Lock
When the keypad is locked, press S, <, S to turn off the lock.
2230_book_1ATT
5/10/01
8:25 PM
Page 9
FEATURE SETUP
Handset Name
You can customize the handset to display a name or word of your choice
in place of the READY standby screen. The default setting is READY.
1 Press S.
2 Press 8. The screen displays
>HANDSET NAME
LANGUAGE
Press S.
Use the chart on page XX to enter a handset name.
Press S to save the displayed name.
Language Setting
You can set each handset so the display appears in English or Spanish. The
default setting is English.
1 Press S.
2 Press 9. The screen displays
>ENGLISH
ESPANOL
Press S.
Press < or > to select a language.
Press S to save the displayed setting.
Clear Message Waiting*
If you subscribe to telephone company voice mail, and the message waiting
indicator remains on even after you have reviewed all messages, follow the
directions below to turn off the indicator.
1 Press S.
2 Press 1 0. The screen displays
>CLEAR MSG WAIT
DIALING
Press S. The screen displays
Press S to confirm.
CLEAR MSG WAIT
CONFIRM?
2230_book_1ATT
5/10/01
8:25 PM
Page 10
FEATURE SETUP
Set Dial Mode*
This phone comes set for touch tone (DTMF) dialing. If you have dial pulse
(rotary) service, set the dial mode to PULSE.
1 Press S.
2 Press 1 1. The screen displays
>DIALING
FLASH TIME
Press S. The screen displays
Press S.
Press < or > to display DTMF or PULSE.
Press S to save displayed setting.
>DIAL METHOD
FLASH TIME
Set Flash Time
Some phone systems require longer or shorter tones when sending touch
tone signals. You can set the handsets to send a longer or shorter tone by
following the directions below. The default setting is LONG.
1 Press S, #.
2 Press 1 2. The screen displays
>FLASH TIME
LONG
10
Press < or > to display LONG or SHORT.
Press S to save displayed setting.
2230_book_1ATT
5/10/01
8:25 PM
Page 11
TELEPHONE OPERATION
Making a Call
1 Press P, then
dial the number
— OR —
Dial the number,
then press P.
2 Press P again
to end the call.
Answering a Call
1 Press P to
answer a call.
2 Press P again
to end the call.
NOTE: If you have
the Auto Answer
feature turned on,
you can answer a
call by lifting the
handset from the
base or charger.
Flash/Call Waiting
1 Press F to
connect to the
new call when
you receive a
call-waiting signal.
2 Press F again
to return to the
original call.
NOTE: Use F to
access other phone
company subscriber
services, as described
by your provider.
Intercom
1 Signal one handset
Temporary Tone
Dialing
If you have dial pulse
(rotary) service, you
can change from dial
pulse to touch tone
dialing during a call
by pressing *.
1 Make the call,
and wait until it
is connected.
2 Press *. Keys pressed after
this send touch tone signals.
3 After you hang up, the
phone automatically returns
to tone service.
from the other by
pressing I.
2 To respond, press
I on the
second handset.
Redial
1 Press R to
call the last
number (up to 24
digits) dialed from
either handset.
2 Press P to
end the call.
11
2230_book_1ATT
5/10/01
8:25 PM
Page 12
TELEPHONE OPERATION
Page/Handset Locator
Page the handsets from the base by
pressing L. The
handsets will sound a repeating tone.
Cancel the page by pressing any key
on the handset, or wait 30 seconds.
Transferring a Call
You can transfer a call from one handset to the other.
1 Press I (your call is put on hold) to signal the second
handset.
2 At the second handset, press P to take the call.
3 Place the first handset in the base or charger, or press P.
Forwarding a Call
You can forward the call to the second handset.
1 Press I (your call is put on hold), then press P. The
call is sent to the second handset, and disconnected at the first.
2 At the second handset, press P to take the call.
3 If the second handset does not pick up the call, it’s sent back to
the first handset. The screen displays ??.
4 Press P to reconnect the first handset to the call
— OR —
The call is automatically reconnected to the first handset in 20
seconds.
Conference Calling
If one handset is already on a call, you can connect the second
handset to the call by pressing P.
Disconnect either or both handsets by pressing P.
Mute
12
During a telephone conversation, mute the handset microphone
by pressing
. The other party will by unable to hear
anything on your end.
To return to two-way conversation, press
again.
2230_book_1ATT
5/10/01
8:25 PM
Page 13
TELEPHONE PHONE BOOK
This telephone can store up to 20 telephone numbers and names.
Storing a Number and Name in Phone Book
Press m.
Press P.
Enter the telephone number (up to
24 digits).
Press P.
Enter a name connected with this
number, using the chart below.
Press m.
Enter a location number (01 – 20).
Begin at Step 2 to enter another telephone number and name
— OR —
Press
to exit.
FOR POSITION ONLY
We need a screen
illustration here.
FOR POSITION ONLY
We need a screen
illustration here.
FOR POSITION ONLY
We need a screen
illustration here.
Dial Key
Presses
space
’
13
2230_book_1ATT
5/10/01
8:25 PM
Page 14
TELEPHONE PHONE BOOK
Dialing a Number in Phone Book
Press m.
Enter the memory location number (01 – 20)
— OR —
Press < or > to scroll through memory locations.
Press P to dial the displayed number.
Editing/Deleting a Number in Phone Book
14
Press S > S.
Press < or > to scroll through memory locations.
Press
to erase a digit
— OR —
Press and hold
to delete entire telephone number.
2230_book_1ATT
5/10/01
8:25 PM
Page 15
CALLER ID OPERATION
Caller’s
name
Caller’s
telephone
number
FOR POSITION ONLY
We need a screen illustration here
with all icons called out, and basic
caller id screen showing name,
number, place in call history, new
or repeat, etc.
Time of call
Position of call
in Calls Log
Date of call
Reviewing Call History
Press S twice. The screen
displays the most recent call in call
history (call 1 is the most recent call).
Press < or > to scroll through call history.
FOR POSITION ONLY
We need a screen
illustration here.
Removing Call Records
Removing a Specific Call Record
Press S twice. The screen
displays the most recent call in call
history (call 1 is the most recent call).
Press < or > to scroll through call history.
Press and release
to delete the displayed call record.
FOR POSITION ONLY
We need a screen
illustration here.
Removing All Call Records
Press S twice.
Press and hold
. The screen displays DELETE ALL?
Press S to delete all call records
— OR —
Press
to exit without deleting.
15
2230_book_1ATT
5/10/01
8:25 PM
Page 16
CALLER ID OPERATION
Storing a Call Record in Phone Book
You can store a number received by Caller ID in the Telephone Phone
Book.
1 Press S twice. The screen displays the most recent call in call
history (call 1 is the most recent call).
2 Press < or > to scroll through call history.
3 Press S to store displayed number in phone book.
Display Dial
Press P to dial a number displayed in call history.
Dialing Options
Press R until the screen displays the number the way you want to
dial it.
For example: 1–908–555–1212
908–555–1212
1–555–1212
555–1212
The number of dialing options available for each call displayed depends on
the format of the original call.
16
2230_book_1ATT
5/10/01
8:25 PM
Page 17
ART AND TEXT
FOR POSITION ONLY
BATTERIES
STILL NEED INFORMATION
TO COMPLETE THIS SECTION
Battery Life
Battery life depends on how far the handset is from the base, and other
environmental conditions.
NOTE: For optimum performance, charge your handset on the base or
charger every night.
Charge the Handset Battery Pack
•
•
•
•
•
This battery should remain charged for up to five days. A fully charged
battery provides an average talk time of about six to eight hours.
The battery pack needs charging when:
– The battery icon (
) flashes,
– A warning tone sounds, or
– The screen displays LOW BATTERY when idle.
Place the handset in the base or charger so the CHARGING light goes
on. The battery pack is typically charged in eight hours. For best
results, the initial charge should be twelve hours.
You can keep the battery fully charged by returning the handset to the
base or charger after each use.
If you repeatedly get a Low Battery indicator, even after eight hours of
charging, the battery should be replaced. Use only AT&T Battery 2401,
SKU# 91077.
CAUTION: Charge the battery provided with or identified for use
with this product only in accordance with the instructions and
limitations specified in the User’s Manual, Part 1.
Spare Battery
This phone is equipped with a built-in spare battery charger in the base
unit. The spare battery charger allows you to always have a charged
battery available should the handset battery charge become low.
NOTE: Do not switch the battery while on a call.
Press the release button on the bottom of the base unit to open
the spare battery compartment drawer.
Place the battery pack (AT&T Battery 2401, SKU# 91077,
purchased separately) in the drawer, with the charge contacts
facing up and to the left.
Push the drawer closed.
17
The spare battery takes 24 hours to fully charge.
2230_book_1ATT
5/10/01
8:25 PM
BATTERIES
Page 18
ART AND TEXT
FOR POSITION ONLY
STILL NEED INFORMATION
TO COMPLETE THIS SECTION
Replace the Handset Battery Pack
Install the handset battery.
Use only AT&T Battery 2401, SKU# 91077.
Charge the handset battery.
• Place the handset in the base or charger.
• Charge the battery at least 12 hours. After the first charge, the
battery will quick charge in only eight hours.
a) Remove
battery
compartment
cover by
pressing on
indentation
and sliding
downward.
b) Place the battery pack
in the handset. Align
the metal contacts on
the battery with the
contacts in the battery
compartment.
c) Replace cover
by sliding it
on its track up
over battery
case until it
snaps firmly
into place.
Power Fail Operation
You can use your cordless phone during a power outage when a fully
charged battery is installed in the base unit (see “Spare Battery”). This
battery will provide enough power for you to make and receive calls for up
to five hours.
NOTE: When using the spare battery backup power, audio quality may
be somewhat reduced.
18
2230_book_1ATT
5/10/01
8:25 PM
Page 19
IN CASE OF DIFFICULTY
section not complete
If you have difficulty operating this phone, try the suggestions below.
For Customer Service, visit our website at www.telephones.att.com or call
1 800 222–3111. Please retain your receipt as your proof of purchase.
If the phone does not work at all, check these items first:
•
Make sure the power cord is plugged into the base and an electrical
outlet not controlled by a wall switch.
• Make sure the telephone line cord is plugged firmly into the base unit
and the telephone jack.
• Make sure the battery pack is installed correctly.
• If the screen displays LOW BATTERY, place the handset in the base or
charger and charge for at least eight hours.
• If the battery does not charge after eight hours, replace it with AT&T
Battery 2401, SKU# 91077.
If the above suggestions do not solve the problem, try re-initializing the
handset and base (see “To re-initialize the handset and base” below).
If you have no dial tone:
Check all the previous suggestions. If you still do not hear a dial tone,
disconnect the phone and try another phone in the same jack. If there is
no dial tone on that phone either, the problem is probably in your wiring
or local service.
If you hear a two-beep signal when you try to use the handset:
•
•
The handset and base are not communicating properly. You might be
out of range. Move closer to the base and try again.
If moving closer to the base does not help, follow the directions below
to re-initialize the handset and base.
To re-initialize the handset and base:
Disconnect the power to the base.
Remove the handset battery pack.
Wait at least 15 seconds.
Insert the handset battery pack.
Connect the power to the base.
Put the handset in the base to re-initialize.
Wait for handset to display FOUND BASE.
19
2230_book_1ATT
5/10/01
8:25 PM
Page 20
IN CASE OF DIFFICULTY
section not complete
If you hear noise or interference when using the phone:
•
•
•
You may be out of range. Move closer to the base.
Household appliances plugged into the same circuit as the base can
sometimes cause interference. Try moving the appliance or the base to
another outlet.
The layout of your home or office may be limiting the operating range.
Try moving the base to another location, preferably on an upper floor.
If the phone does not ring when you receive a call:
•
•
•
•
•
Make sure the ringer is on.
Make sure the telephone line cord is connected firmly to the base and
the telephone jack.
Make sure the AC adapter is plugged firmly into an electrical outlet not
controlled by a wall switch.
You might be too far from the base; move closer.
You might have too many extension phones on your telephone line to
allow all of them to ring. Try unplugging some of them.
If your telephone misdials:
•
•
If you have dial pulse (rotary) service, you’ll need to set the Dial Mode
to PULSE. Follow the instructions under “Set Dial Mode” in the
FEATURE SETUP section of this manual.
If you have touch tone service and you hear clicks while you are dialing,
you’ll need to set the Dial Mode to DTMF. Follow the instructions under
“Set Dial Mode” in the FEATURE SETUP section of this manual.
If the caller’s name or phone number is not displayed:
•
•
•
Make sure you subscribe to a Caller ID service from your local
telephone company.
Make sure the battery is charged.
Caller ID service might not work when the phone is connected to a
Private Branch Exchange (PBX).
If the caller’s name or phone number is not displayed during
Call Waiting:
•
•
•
20
You should call your service provider to confirm that you subscribe to
a combined Caller ID with Call Waiting service.
The Caller ID with Call Waiting feature is inactive during a power
interruption.
Make sure the battery is charged.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.1
Linearized                      : No
Page Count                      : 22
Create Date                     : 2001:05:10 20:30:44
Producer                        : Acrobat Distiller 3.01 for Power Macintosh
Author                          : 
Creator                         : QuarkXPressª 4.1: LaserWriter 8 8.1.1
Title                           : 2230_book_1ATT

EXIF Metadata provided by EXIF.tools