VTech Telecommunications 80-5744-11 Cordless Telephone Remote Transceiver User Manual users manual

VTech Telecommunications Ltd Cordless Telephone Remote Transceiver users manual

Contents

users manual

CHANMUTEREDIALUser Manual2.4 GHz Cordless Telephone E2116with Caller ID & Call Waiting
Congratulations on your purchase of this AT&T product. Before using this telephone system, please read Important Safety Instructions in the Appendix of this manual.NEED HELP?Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues.Call Toll Free 1 (800) 222-3111 In Canada, Call 1 (866) 288-4268 or visit our website at www.telephones.att.comModel No.: AT&T E2116Product Name: 2.4 GHz Cordless TelephoneSerial No.: SN: (found at the bottom of the base unit)Purchase Date: Dealer:
Depending on your service subscription, you may see the caller’s number, or the caller’s name and number. This product can provide information only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment. The time and date are sent by the service provider along with the call information.Information about Caller ID with Call WaitingCopyright © 2005 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones.This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who’s calling before you answer the phone, even when you’re on another call.You may need to change your phone service to use this feature. Contact your phone service provider if: • You have both Caller ID and Call Waiting, but as separate ser-vices (you may need combined service).• You have only Caller ID service, or only Call Waiting service.• You don’t subscribe to any Caller ID or Call Waiting services. You can use this product with regular Caller ID service, you can use this product’s other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service.There are fees for Caller ID services, and they may not be available in all areas.IMPORTANT
Copyright © 2005 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones.STOP! See page 7for easy instructions.You must install and charge the battery before using the telephone.Please also readImportant Product Informationon page 32.For customer service or productinformation, visit our web site atwww.telephones.att.comor call 1-800-222-3111.In Canada, call 1-866-288-4268.CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:• Use only replacement battery model 3301(Part number 80-5071-00-00 or AT&T SKU 23403).• Do not dispose of the battery in a fire, it could explode. Check with local codes for special disposal instructions.• Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.• Exercise care in handling batteries in order not to create a short circuit with conducting materials such as rings, bracelets, and keys. The battery or conduc-tor may overheat and cause harm.• Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.• Observe proper polarity orientation between the battery and battery charger.Do not disassemble your telephone. There are no user-serviceable parts inside. Refer for servicing to qualified service personnel.
1CHANMUTEREDIALUser Manual 2.4 GHz Cordless Telephone E2116with Caller ID & Call WaitingGetting StartedQuick reference guide ........................ 2Parts checklist ...................................... 4Before you begin .................................. 5Telephone base installation ................ 6Battery installation & charging .......... 7Wall mounting ......................................8Belt clip & optional headset .............. 9Telephone OperationHandset Operation ...........................10Handset Settings ................................12 Base Operation ..................................13Messages Waiting ...............................14Speed Dial ...........................................16DirectoryStore/Edit an entry ............................19Delete/Move an entry to Speed Dial ................................................................20Dial a number from the Directory ...20Caller ID LogHow Caller ID works .......................21To review the call log ........................23AppendixTroubleshooting .................................28Important Product Information ..... 33Save /these Instructionsn ................. 34FCC Part 68 and ACTA .... ...............36FCC Part 15 ....................................... 37Limited Warranty .............................. 38Technical Specifi cations .................... 41Table of contents
2CHANMUTEREDIALOFFWhile on a call, press to temporarily mute the ringer. While using menus, press to cancel an operation, back up, or exit the menu display.When ringing, press to temporarily mute the ringer.Redial/PausePress to view redial memory. While entering numbers, press and hold to insert a dialing pause. CIDWhile on a call, press to lower the volume. A double beep will sound when you reach the lowest setting.While the phone is not in use, press to display caller ID information.While entering names or numbers into memory, press to delete last character entered.SPEAKERPress to activate handset speakerphone. Press again to resume normal handset use (earpiece). DIRWhile on a call, press to increase the volume. A double beep will sound when you reach the highest setting.While the phone is not in use, press to display directory entries.While entering names or numbers, press to add a space.PHONE/FLASHPress to make or answer a call or dial the number (use to backspace and make corrections), then press PHONE to call.During a call, press to put current call on hold and receive an incoming call, if call waiting service is subscribed.MUTEWhile on a call, press to mute micro-phone.CHAN/DELWhile on a call, press CHAN to switch to a different channel for better reception.When viewing the call log, press to delete the current record. While handset is in idle mode, press and hold to delete all records in the call log.HandsetFeature menuDIRECTORY Press or to scroll through menu items.Press SELECT to select or modify a highlighted item.Press OFF to cancel an operation, return to the previous menu, or exit the menu display.Press to display menu, or to select high-lighted item from menu.Quick reference guideGetting StartedFeature MenuDIRECTORY.................See page 19SPEED DIAL.................See page 16RINGER TYPE..............See page 12RINGER VOLUME ........See page 12DATE/TIME ...................See page 12DIAL MODE ..................See page 12MESSAGE WAITING....See page 12LANGUAGE.... ..............See page 12MENUSELECTMENUSELECT
3Getting StartedTelephone BaseHandset LocatorPress to page the handset. Press again, press OFF on handset, or place handset in the base to cancel the page.Charge/In UseFlashes slowly when the handset is in use. Glows steadily when the handset is charging in its base.Flashes in cadence with incoming ringing.New VoicemailIf you subscribe to telephone company voicemail with a visual message waiting signal, this light fl ashes, and MESSAGE WAITING displays on the handset screen when you have voicemail waiting. Quick reference guide
4Getting StartedParts checklistRemember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: a. Telephone base b. Telephone handset c. Power adaptore. Belt clip f. Telephone line cordd. Wall mount bracketCHANMUTEREDIALg. Battery packa. Telephone baseb. Telephone handsetc. Power adaptord. Wall mount brackete. Belt clipf. Telephone line cordg. Battery pack
5Getting StartedBefore you beginAbout Caller Identification Caller ID with Call Waiting features in this telephone let you see who’s call-ing before you answer the phone, even when you’re on another call. These fea-tures require services provided by your local telephone company.Contact your telephone service pro-vider if:• You have both Caller ID and Call Waiting, but as separate services (you may need combined service)• You have only Caller ID service, or only Call Waiting service• You don’t subscribe to any Caller ID or Call Waiting services.You can use this phone with regular Caller ID service, and you can use its other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service. There may be fees for these services, and they may not be available in all areas.Caller ID features will work only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment.See Caller ID, on page 20, for more details about how these features work.Telephone operating rangeThis cordless telephone operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can only communicate over a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. If there is a call while the handset is out of range, the handset might not ring — or if it does ring, the call might not connect well when you press PHONE. Move closer to the base, then press PHONE to answer the call.If the handset moves out of range during a phone conversation, there may be interference on the line. To improve reception, move closer to the base.If you move out of range without pressing OFF, your phone will be left off the hook. To hang up properly, walk back toward the telephone base, peri-odically pressing OFF until the call is disconnected.Note: For better reception while on the line, press CHAN/DEL button until all interference is elimi-nated.
6Getting StartedNOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222–3111 in the U.S. In Canada, call 1-866-288-4268. Be sure to use an electrical outlet not controlled by a wall switch.Telephone base installationPlug power adaptor into electrical outlet.Plug telephone line cord into telephone jack.Install the telephone base as shown below. IMPORTANT! FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM:1. Choose a central location for your base unit.2. Install your base unit and extension handsets away from electronic equipment, such as personal com-puters, television sets and microwave ovens.3. In locations where there are multiple cordless telephones, separate the base units as far away as possible.4. Install your telephone equipment away from heat sources and sunlight.5. Avoid excessive moisture, dust or extreme cold.
7Getting StartedBattery installation & chargingAfter battery installation, place the handsets in the base unit or charger and allow to charge for at least 16 hours before use.You can keep the batteries charged by returning the handsets to the base unit or charger after each use. Recharging of a fully depleted bat-tery may take up to 14 hours. A fully charged battery could provide up to 5 hours of talk time, or 8 days of standby time. Actual battery life depends on usage condition and age of battery.Insert supplied bat-tery. Ensure the plug on the battery pack is securely inserted into the socket of the com-partment according to the colour-coded label.Place handset in base or charger to charge for at least 16 hours before first use.Plug charger power cord into jack on under-side of charger, then plug power adaptor into electrical outlet.Low battery indicator.Return handset to base or charger to recharge when this symbol flashes. (Handset will beep when battery is low.)Caution: Use only the supplied rechargeable battery or AT&T replacement battery model 3301 (SKU 23403, Part number 80-5071-00-00). Press tab to open battery compartment.Replace compartment cover.CHANMUTEREDIALNEEDS RECHARGING
8Getting StartedWall mountingThe line cord of the base unit can be plugged into any standard wall-phone outlet as shown below. Choose a location away from electronic equipment such as personal com-puters, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.Plug power adaptor into electrical outlet.Connect cords as shown on page 6, then press and slide the cords down firmly so the base is held securely on outlet mounting pegs.Plug telephone line cord into telephone jack.Clip wall-mount bracket securely into notches on underside of base.Install the line cord as shown in the diagram.
9Getting StartedBelt clip & optional headsetInstall belt clip as shown below if desired.For hands-free telephone conversations, use any industry standard 2.5 mm headset (available separately). For best result, use an AT&T 2.5 mm headset.Snap belt clip into notches on side of handset. Rotate and pull to remove.Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap).CHANMUTEREDIAL
10CHANMUTEREDIALHandset OperationMaking a Call Press PHONE (A) or SPEAKER (B), then dial the number. -OR-Dial the number (use to backspace and make correc-tions), then press PHONE (A) or SPEAKER (B) to call.Call WaitingDuring a call, press FLASH (A) to receive the new incom-ing call if call waiting is activated. ChannelPress CHAN (C) to switch to a clear channel without interference while on a call. DeletingWhen viewing the call log, press DEL (C) to delete the current record displayed. While the handset is in idle mode, press and hold to delete all records in the call log.Answer a Call Press any key (except OFF) to answer a call./CID and /DIR /CID (D)• While on a call, press to lower the volume. A double beep will sound when you reach the lowest setting.• While the phone is not in use, press to display caller ID information.• While entering names or numbers into memory, press to delete the last character entered./DIR (E)• While on a call, press to increase the volume. A double beep will sound when you reach the highest setting.• While the phone is not in use, press to display direc-tory entries.• While entering names or numbers, press to add a space. DAFlashEBCTelephone Operation
11Telephone OperationHandset OperationMENU/SELECTPress (A) to display menu, or to select highlighted item from menu. OffDuring a call, press (B) to hang up. While using menus, press to cancel an operation, back up, or exit the menu display. Press OFF (B) to temporarily mute the ringer during an incoming call. Redial/PausePress (C) to view redial memory. While entering numbers, press and hold to insert a dialing pause. Press REDIAL/PAUSE (C) to display the last telephone number (up to 32 digits) dialed from the handset, then press PHONE (H) or SPEAKER (E) to dial that number again.SpeakerTo answer a call, press SPEAKER (E). To make a call, press SPEAKER (E), then dial a number.During a call, press SPEAKER (E) to toggle between the hands-free speakerphone and regular handset use.Press OFF (B) to hang up.MutePress MUTE (F) to silence the microphone so that the caller could not hear your conversation with a third party, but you can still hear the caller. Press MUTE (F) again to resume your telephone conversation normally.To n eIf you have pulse dial (rotary) service, you can switch to touch tone dialing during a call by pressing TONE * (G). This can be useful when sending tone signals for access to answering systems or long distance services. CHANMUTEREDIALABCDEFGH
12Telephone OperationHandset SettingsFrom the feature menu, you can change settings to customize how the telephone works.Press MENUSELECT, then use the and buttons to scroll to the feature to be changed. Press OFF anytime to cancel an operation, back up to the previous menu, or exit the menu display. Ringer TypeThe Ringer Type allows you to choose one of 4 ringer tones for incoming calls or intercom calls. Use the or buttons to sample each ringer tone, then press MENUSELECT to select the appropriate one.Ringer VolumeSet the default ring volume level (1-3), or turn the ringer off. Use the or buttons to same each volume level, then press MENUSELECT to select the appropriate one. Date/Time This feature sets the date and time on the LCD display of the handset. Press MENUSELECT to enter the menu. Press or until DATE/TIME is displayed. Press MENUSELECT to set the date and time. Use the or buttons to change the month, then press MENUSELECT to set the date, the hour, the minute, and AM/PM accordingly.Dial Mode This feature allows you to choose tone dial or pulse dial. Change to PULSE dial only if you do not have tone-dial service in your area. Use the or buttons to select TONE or PULSE, then press SELECT to save your preference.Message WaitingIf you subscribe to the voicemail service provided by your local telephone company, you will receive a text message on the handset when there is new voicemail. To manu-ally remove the VOICEMAIL message on the display:• Press MENU.• Press or until MESSAGE WAITING is displayed.• Press SELECT.• When asked to confi rm, press to remove the indication, or press OFF to exit with-out changing.NOTE: This only turns off the displayed message on the handset. It does not delete your voicemail messages.Language The feature allows you to select the default language used in all menus and screen dis-plays. Use the or buttons to select English or Spanish, then press SELECT to save your preference.Handset locatorIf you misplace the handset, press HANDSET LOCATOR at the base. The handset will beep for 60 seconds to help you locate it. To stop the beeping, press PHONE, SPEAKER, or any dial pad button on the handset, or press HANDSET LOCATOR at the base.
13Telephone OperationBase OperationNew VoicemailIf you subscribe to the voice mail service with a visual message waiting signal from your telephone company, this light flashes, and MESSAGE WAITING is displayed on the screen of the handset when there is voicemail waiting. Handset LocatorPress to page the handset. Press again, press OFF on handset, or place handset in the base to cancel the page.Charge/In use Indicator • Flashes slowly when the handset is in use. • Glows steadily when the handset is charging in its base. • Flashes in cadence with an incoming ringing.
14Telephone OperationMessagesMessage WaitingYour phone is designed to work with most local and regional telephone service providers’ voice messaging systems, providing alerts on both the handset and base unit when new messages come in.Voice messaging is a subscription service available through most service providers for a monthly fee. Contact your local telephone company for more information.When a caller leaves a message in your voice mailbox, the MESSAGE WAITING light on the base unit will flash. In addition, the handset will display “MESSAGE WAITING” with the date and the time of the incoming call.Clear Message Waiting AlertAfter you review your message(s) if the message waiting alert does not go off, you may manually turn it off.• Press MENUSELECT to activate the menu.• Press or until the screen displays MESSAGE WAITING.• Press SELECT, the screen displays: CLEAR ? YES• Press or to select YES or NO.• Press SELECT to confi rm the desired setting. A confi rmation tone will sound.MESSAGE WAITING5/01 5:40 PMCLEAR? YES
15Telephone OperationMessages Display Screen MessagesScreen Display: When:** RINGING **CONNECTING...PHONE ONMESSAGE WAITING** PAGING **NEEDS RECHARG-ING SCANNING...CAN’T CONNECTRINGER OFFMUTESPEAKERThere is a call coming in.The handset is waiting for a dial tone.The handset is in use.There is have new voicemail.The base is paging the handset.The battery needs to be recharged. The handset is changing to one of the 30 channels for better reception.Displays when base power is off and PHONE is pressed. You’ll also hear an error tone.Displays when an out-of-range dial fails to connect.The handset ringer is turned off.The microphone on the handset is muted.The handset is in SPEAKERPHONE mode.
16Telephone OperationSpeed DialYour phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each loca-tion) into the speed dial memory locations you assign (1 through 9). You can also store telephone numbers with names alphabetically in the directory. See Te l e phone Di rec to ry for instructions. Store a Number/Name in Speed Dial• Press MENU / SELECT on the handset.• Press or until the screen displays SPEED DIAL.• Press SELECT. The screen displays ENTER 1-9.• Press the desired key (1 through 9) for the memory location to store this entry. The screen displays ENTER NAME.• Using the chart below, enter up to 15 characters for the name you are storing with the number. Use to backspace and make corrections; use to advance and add a space.NOTE: The entries stored in speed dial memory will be marked as 01 through 09 in the telephone directory. Press OFF anytime to exit the speed dial mode. When the memory is full, the screen displays MEMORY FULL, an error tone sounds, and you cannot store any new number until you delete a record from the speed dial memory or the directory. If the location is not empty, your new entry will be stored in place of the old and the first entry will be deleted. Take caution not to overwrite existing entries you do not wish to delete from memory. PressDial Key Once Twice 3 Times 4 Times 5 Times 6 Times112AB C 23D E F 34G H I 45J K L 56M N O 67P Q R S 78T U V 89W X Y Z 900**#& ‘ , - . #
17Telephone OperationSpeed Dial• When you fi nish entering the name, press MENUSELECT. The screen displays ENTER NUMBER.• Enter the telephone number. Use to backspace and make corrections. Press REDIAL/PAUSE to store pauses in the dialing sequence. -OR- Press REDIAL/PAUSE to display the last number dialed from this handset.• Press MENUSELECT to store your entry. The screen displays DISTINCT RING? and the current setting.• Press or to change the setting. Choose Y (for yes) if you wish the phone to alert you to calls from this number by changing to a distinctive ringing pat-tern after the fi rst ring. Choose N for a normal ring-ing pattern.• Press MENUSELECT to confi rm your selection. If you chose Y, a will be displayed with that particular speed dial entry.Edit a Speed Dial Entry• Press and hold the memory location key (1 through 9) of the entry you wish to edit.• When the screen displays the entry you want to edit, press SELECT. Then press or until EDIT fl ashes.• Press SELECT. The screen displays the name and number. The cursor appears at the end of the name. Use , and the keypad to edit the name. Press SELECT to move on to edit the number. Use to backspace and make corrections. Press SELECT to move to edit the distinctive ring setting. • Press SELECT to save the edited information. Delete a Speed Dial Number/Name• Press and hold the speed dial location key (1 through 9) for the entry to be deleted.• When the screen displays the entry yto be deleted, press SELECT. Then press or until ERASE fl ashes.SPEED EDIT ERASE555-123401SPEED EDIT ERASE555-123401
18Telephone OperationSpeed Dial• Press SELECT. The screen displays ERASE NO YES and the number.• Press or until YES fl ashes.• Press SELECT. A confi rmation beep will sound. Dial a Speed Dial Entry• Press and hold the speed dial location key (1 through 9) of the entry you wish to dial.• Press PHONE or SPEAKER to dial the displayed num-ber in memory. Re-Assign Locations in Speed Dial• Press and hold the speed dial location key (1 through 9) for the entry you want to be re-assigned.• When the screen displays the entry to be re-assigned, press SELECT. Then press or until SPEED fl ashes.• Press SELECT. The screen displays ENTER 1-9.• Press the keys (1 through 9) to re-assign this entry into another memory location. A confi rmation beep will sound.SPEED EDIT ERASE555-123401
19DirectoryYour phone can store 30 (including the 9 speed dial entries) telephone numbers with names (up to 15 char-acters for the name and 24 digits for the number in each location) in each handset.Store an entry• Press MENUSELECT. The screen displays DIRECTORY.• Press SELECT. The screen displays ENTER NAME.• Using the chart on page 16, enter up to 15 char-acters for the name to be stored with the number. Use to backspace and make corrections; use to advance and add a space.• After entering the name, press SELECT. The screen displays ENTER NUMBER.• Enter the telephone number. Use to backspace and make corrections. Press REDIAL/PAUSE to store a pause if necessary. — OR — Press REDIAL/PAUSE to display the last number dialed from this handset.• Press SELECT. The screen displays DISTINCT RING? and the current setting.• Press or to choose Y (yes) if you wish the sys-tem to alert you to calls from this number by chang-ing to a distinctive ringer after the fi rst ring. Choose N for a normal ringer.• Press SELECT to confi rm. If you chose Y in Step 7, a will be displayed with that directory entry.Edit an entry• Press DIR. The screen displays DIRECTORY.• Press or to scroll alphabetically through entries stored in directory. — OR — Input the fi rst letter of the desired entry to be edited from the keypad.• When the screen displays the desired entry to be edited, press SELECT. Then press or until EDIT fl ashes.• Press SELECT. The screen displays the name and number. The cursor appears at the end of the name. Use , and the keypad to edit the name. SPEED EDIT ERASE555-1234Directory
20Directory• Press SELECT to confi rm and move on to edit the number. Use to backspace and make corrections.• Press SELECT to confi rm and move to edit the dis-tinctive ring setting.• Press SELECT to save the edited information.Delete an entry• Press DIR. The screen displays DIRECTORY.• Press or to scroll alphabetically through entries stored in the directory. — OR — Input the fi rst letter of the entry to be deleted.• When the screen displays the desired entry, press SELECT. Then press until ERASE fl ashes.• Press SELECT. The screen displays ERASE NO YES and the number. The current choice fl ashes.• Press or until YES fl ashes.• Press SELECT. A confi rmation tone will sound.Move an entry to Speed Dial • Press DIR. The screen displays DIRECTORY.• Press or to scroll alphabetically through entries stored in the directory. — OR — Input the fi rst letter of the entry to be moved to speed dial.• When the screen displays the desired entry, press SELECT. Then press or until SPEED fl ashes.• Press SELECT. The screen displays ENTER 1-9.• Press the key (1-9) to move this entry from the nor-mal directory to the speed dial memory and assign a memory location. A confi rmation beep will sound. A memory location number (1 through 9) will be dis-played with this entry.Dial a Number from the Directory• Press DIR. The screen displays DIRECTORY.• Press or to scroll alphabetically through entries stored in directory. — OR — Input the fi rst letter of the entry to be dialed.• When the screen displays the desired entry, press PHONE or press SPEAKER.SPEED EDIT ERASE555-1234SPEED EDIT ERASE555-1234
21Caller ID LogShared Caller ID Log The Caller ID Log is stored in the base unit, and isshared by all handsets. Each handset’s call log is indepen-dent from the other handset. For example, when youdelete one or all call log entries from one handset, theinformation on all other handsets will not be affected.How Caller ID works If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring.Information about the last 30 incoming calls is stored in the call log in both the base unit and the cordless hand-set respectively. You can review the call log to find out who has called, return the call, or copy the caller’s name and number into your directory.When the call log is full, the oldest entry is deleted to make room for new incoming call information.If you answer a call before the information appears on the screen, it will not be saved in the call log.NOTE: Only one handset can review the call log at a time. If another handset attempts to enter the call log, it will display NOT AVAILABLE AT THIS TIME.NOTE: Caller ID features will work only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment.Caller ID LogsCHARLIE JOHNSON L 908-555-01005/01 5:40 28 *NEWPM OLDCaller’s nameThis party has called consecutively.Long distance callTime of callDate of callIndicates whether the record is new or oldCaller’s telephone numberCHARLIE JOHNSON L 908-555-01005/01 5:40 28 *NEWPM OLD
22Caller ID LogLCD Screen For each incoming call, the screen displays the following information between the first and second rings:• The caller’s name (15 letters are sent by your telephone company) • The caller’s area code and telephone number.• The time and date of the call. • The repeat tag (*) in the upper right corner, indicating the caller has called more than once.With most incoming calls, the screen shows the name of the originating subscriber (up to 16 characters including space) in the top row, and the originating telephone number including local long distant area code (up to 16 digits including space) in the second row. The third row shows the time/date stamp, the total number of incoming tele-phone numbers already stored in the handset memory, as well as the low-battery icon if the batter is low. There are also occasions when other information or no information is displayed for various reasons:On-Screen Message ReasonPRIVATE Caller is blocking name and/or number information. UNKNOWN Your local telephone company is unable to receive imformation about this caller’s name and/or number.(Name) * This person called consecutively.The information containing the caller’s name, telephone number, and the time/date stamp on the screen of the handset will light up when there is an incoming call, and it will remain lit on the screen for 6 seconds after the last ring if the call is not answered, or if the call is answered either by the corded receiver on the main unit or by the cordless handset if it is within range.If an incoming call is answered before the information appears on the screen, it will not be shown in the call history. About names Names of callers will be displayed only if this information is provided by your local tele-phone company. If the telephone number of the person calling exactly matches a number in your direc-tory, the name which appears on screen will match the name as you entered it into your directory. (Example: If Christine Smith calls, her name will appear as Chris if this is how you entered it into your directory.)Caller ID Logs
23Caller ID LogsTo review the call logTo review the call log• Press CID on the cordless handset to activate the incoming call record. • Press the two arrow keys ( and on the cordless handset) to scroll through the incoming records to review incoming calls and check for missed calls.• Consecutive incoming calls originating from the same telephone number will are identifi ed by an asterisk (*) at the top right corner of the LCD screen. • As each incoming call comes in, the Caller ID Memory automatically deletes the oldest Caller ID Memory record if the existing record exceeds 30.E.g. When there are already 30 entries in the CID Memory, the next incoming call will automatically cause Call No. 1 to be deleted from the CID Memory of the respective handset.To return a call• Press on the cordless handset to activate the CID Memory. • Press or on the cordless handset to scroll to the desired number to be dialed.• Press SELECT, then press or until DIAL fl ashes. • Press SELECT or PHONE, and the number is auto-matically dialed.Caller ID numbers may appear with an area code which may not be required for local calls, or without a “1” which may be needed for long distance calls. If the number displayed is not in the correct format, press # repeatedly to see different dialing options. You can choose to dial with or without the area code, and with or without the “1”), then press PHONE to place the call.Example:CID..............................Number displayed as 908-555-0100### ......... Number changes to 555-0100 (drops “1” + area code)PHONE/SPEAKER .................. Dials 555-01006 NEW CALLSNEWPat Williams555-1234NEW 11/23 10:31AMChris Thompson908-555-0100NEW 11/23 10:21AMJeffrey Adams555-9876NEW 11/23 10:11AM
24To review the call logTo store from the Caller ID Log into the directory• Press on the cordless handset to activate the caller ID log.• Press or on the cordless handset to scroll to the desired number to be stored. • If you wish to change how the number is stored, press #. The screen displays all alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only, 1 + number). See the note in the section above on changing the dialing sequence.• Press SELECT, then press or until PROGRAM fl ashes. • Press MENUSELECT three times. The screen displays:• Press or to select Y or N for distinctive ringer.• Press SELECT. A beep tone will sound to confi rm your choice. If you choose Y in the previous step, a D will be displayed with the directory entry. To delete an entry• Press CID on the handset to activate the caller ID log. • Press the arrow or on the handset to scroll to the incoming call entry to be deleted.• When the desired record is displayed on the LCD screen, press DEL to delete the record and a confi rmation beep will sound.• The subsequent call entry will be advanced to that call number. NOTE: Deleting an incoming call record on one cordless handset does not automatically delete the same record from other handsets. NOTE: When an entry is deleted, the next oldest record is displayed. To delete all Caller ID records• With the handset in the idle (off) mode, press CID on the handset to activate the caller ID log. • Press and hold DEL on the handset for 1.5 seconds or longer to clear all entries in the CID Log of the unit.• The message ERASE ALL NO YES appears on the screen, with the current choice of either NO or YES fl ashing, asking you to confi rm that you want to delete all entries in the CID Log. • If you select YES, the call log will be cleared and the screen will return to the nor-mal standby display, showing new and old calls both as 00.• Press until YES fl ashes.• Press SELECT and a beep tone will confi rm the deletionNOTE: When an entry is deleted, the next oldest record is displayed.Ring silencingIf the LCD screen shows the telephone number from an undesirable caller, you can turn the ringer located on the left side of the base unit to the OFF position or by pressing OFF on the cordless handset. This will silence the ringer without disconnect-ing the call. If your answering system is on, the caller will be asked to leave a message after the outgoing message is played. Caller ID Logs
25Caller ID Logs 908-555-01005/01 5:40 28PM OLD 908-555-01005/01 5:40 28PM OLDDIAL PROGRAM 908-555-01005/01 5:40 28PM OLD 908-555-01005/01 5:40 28PM OLDDIAL PROGRAM908-555-01005/01 5:40 28PM OLDDISTINCT RING? NDial a Displayed Number• Locate the desired record in call history.• If you wish to change how the number is dialed, press #. The screen displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). See the margin for more information on changing the dialing format.• Press SELECT. Press or until DIAL fl ashes.• Press SELECT. The number is automatically dialed. — OR — When the number is correctly displayed for dialing, press PHONE or SPEAKER to dial the number.Store a Caller ID Entry in the Directory• Locate record in call history.• If you wish to change how the number is dialed, press #. The screen displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). See the margin for more information on changing the dialing format.• Press SELECT, then press or until PROGRAM fl ashes.• Press SELECT three times. The screen displays:• Press or to select Y or N for distinctive ringer.• Press SELECT. You’ll hear a confi rmation beep. If you choose Y in step 5 a will be displayed with the directory entry.NOTE: Caller ID numbers may appear with an area code that may not be required for local calls, or without a 1 that may be needed for long distance calls. If the number displayed is not in the correct format, press # repeatedly to see the different dialing options. You can choose to dial with or without the area code and with or without the 1.
26Caller ID LogsTo review the call logTo review the call logPress CID to review the call log. The most recent call is displayed first. Use the arrow buttons to scroll through the list as shown at left.To return a callPress PHONE (or SPEAKER) to call the number as displayed. Caller ID numbers may appear with an area code that may not be required for local calls, or without a "1" that may be needed for long distance calls. If the number dis-played is not in the correct format, you can change how it is dialed.To change the number before calling, press # repeat-edly to see different dialing options (you can choose to dial with or without code, and with or without the "1"), then press PHONE (or SPEAKER) to place the call.Example:CID..............................Number displayed as 908-555-0100# (three times) ......Number changes to 555-0100 (drops “1” + area code)PHONE/SPEAKER .................. Dials 555-0100Other options• Press DELETE to delete this entry from the call log.• Press and hold DELETE to delete all entries from the call log. When asked to confi rm, press SELECT to clear the call log of all entries, or OFF to exit and leave all call log entries intact.• Press SELECT to copy this entry into your directory. If the name or number is not provided, you will be prompted to enter them (see page 21). NOTE: If both the name and number are not provided, UNABLE TO SAVE will be displayed.HANDSET 16 NEW CALLSNEWPat Williams555-1234NEW 11/23 10:31AMChris Thompson908-555-0100NEW 11/23 10:21AMJeffrey Adams555-9876NEW 11/23 10:11AM
27Caller ID LogsDisplay Screen MessagesScreen Displays: When:PRIVATEUNKNOWN* (after name)The other party is blocking the name and/or num-ber information.Your phone company is unable to receive infor-mation about this caller’s name and/or number.This person called consecutively.
28TroubleshootingIf you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com, or call 1-800-222–3111.My phone doesn’t work at all.• Make sure the power cord is securely plugged in.• Make sure the telephone line cord is securely plugged firmly into the base unit and the telephone wall jack.• Charge the battery in the handset for at least 16 hours. For optimum daily performance, return the handset to its base when not in use.• Reset the base. Unplug the unit’s electrical power. Wait for approxi-mately 15 seconds, then plug it back in. Allow up to one minute for the handset and base to reset.• You may need to purchase a new battery, please refer to the battery section of this user’s manual.I cannot get a dial tone• First try all the suggestions above.• Move the handset closer to the base. You might have moved out of range.• Your line cord might be malfunctioning. Try installing a new line cord.• If the previous suggestions don’t work, disconnect the base unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local ser-vice. Contact your local telephone company.I cannot dial out• Make sure you have a dial tone before dialing. The handset may take a second or two to identify the base and produce a dial tone. This is normal. Wait an extra second before dialing.• Make sure your phone is set to the correct dial mode for the type of service that you have (pulse or touch tone). Refer to the Installation section of this user’s manual to set the dial mode.• If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-phone company (charges may apply.)• Eliminate any background noise. Noise from a television, radio or other appliance may cause the phone to not dial out properly. If you cannot eliminate the background noise, first try muting the handset before dialing, or dialing from another room in your home with less background noise.My handset beeps five times and isn’t performing nor-mally.• Make sure the power cord is securely plugged into the base. Plug the unit into a different, working outlet not controlled by a wall switch.• Move the handset closer to the base. You might have moved out of range.Appendix
29AppendixCAN’T CONNECTdisplays on my handset.• Move the handset closer to the base. You might have moved out of range.The batteries will not hold a charge.• Charge the battery in the handset for at least 16 hours. For optimum daily performance, return the handset to its base when not in use.• You may need to purchase a new battery, please refer to the batteries section of this user’s manual.• Your phone might be malfunctioning. Please refer to the warranty section of this user’s manual for further instruction.TroubleshootingI get noise, static, or weak signal even when I’m near the base• Press the CHAN button while on a call until the interference has been eliminated.• Other electronic products can cause interference to your cordless phone. Try installing your phone as far away from the following elec-tronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones.• Microwaves operate on the same frequency as your phone. It is nor-mal to experience static on your phone while the microwave oven is operating. Do not install this phone in the same outlet or near a micro-wave oven.• If your phone is plugged in with a modem or a surge protector, plug the phone (or modem/surge protector) into a different location. If this solves the problem, re-locate your phone or modem farther apart from one another, or use a different surge protector.• Relocate your phone to a higher location. The phone will likely have better reception when not installed in a low area.• If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-phone company (charges may apply.)• Reset the base. Unplug the unit’s electrical power. Wait for 15 sec-onds then plug it back in. Allow up to one minute for the handset and base to reset.• Other electronic products can cause interference to your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones.
30AppendixI hear other calls while using my phone• Press the CHAN key while on a call to change to a clear channel.• Disconnect the base unit from the telephone jack, and plug in a regu-lar telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.I hear noise in the handset, and none of the keys or buttons work• Make sure the power cord is plugged in securely.TroubleshootingMy handset does not ring when I receive a call• Make sure you have the ringer activated. Refer to the section(s) on ringer selection in this user’s manual.• Make sure the telephone line cord is plugged securely into the base unit and the telephone jack. Make sure the power cord is securely plugged in.• The handset may be too far from the base unit.• Charge the battery in the handset for at least 16 hours. For optimum daily performance, return the handset to its base when not in use.• You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones.• The layout of your home or office might be limiting the operating range. Try moving the base to another location, preferably on an upper floor.• If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-phone company (charges may apply.)• Test a working phone at the phone jack. If another phone has the same problem, the problem is the phone jack. Contact your local telephone company (charges may apply.)• Other electronic products can cause interference with your cordless phone. Try installing your phone as far away as possible from elec-tronic devices wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal comput-ers, kitchen appliances and other cordless phones• Your line cord might be malfunctioning. Try installing a new line cord.
31AppendixTroubleshootingMy calls fade out or cut in and out while I’m using my handset• Press the CHAN button while on a call until the interference has been eliminated.• Other electronic products can cause interference with your cord-less phone. Try installing your phone as far away from the following electronic devices as possible: wireless routers, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones• Microwaves operate on the same frequency as your phone. It is nor-mal to experience static on your phone while the microwave oven is operating. Do not install this phone in the same outlet or near the microwave oven.• If your phone is plugged in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this solves the problem, re-locate your phone or modem farther apart from one another, or use a different surge protector.• Relocate your phone to a higher location. The phone will have better reception when not installed in a low area.• If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local tele-phone company (charges may apply.)The charge light is off• Clean the handset and base charging contacts each month using a pencil eraser or cloth.• Make sure the power and line cords are plugged in correctly and securely.• Unplug the unit’s electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the handset and base to reset.• Your phone might be malfunctioning. Please refer to the Warranty section of this user’s manual for further instruction.My Caller ID isn’t working• Caller ID is a subscription service. You must subscribe to this service from your local telephone company for this feature to work on your phone.• Your caller must be calling from an area that supports caller ID.• Both you and your caller’s telephone companies must use caller ID compatible equipment.Common cure for electronic equipment If the unit does not seem to be responding normally, try putting the handset in its base. If it does not seem to respond, do the following (in the order listed):• Disconnect the power to the base.• Disconnect the handset battery, and spare battery, if applicable.• Wait a few minutes.• Connect power to the base.
32AppendixTroubleshooting• Re-install the battery, and place handset in base cradle.• Wait for the handset to re-establish its connection with the base. To be safe, allow up to one minute for this to take place.If you subscribe to DSL service• If you hear noise during conversations and/or your caller ID features aren’t functioning properly, install a noise filter to the telephone line between the base unit and the telephone line jack. Contact your DSL provider to obtain a noise filter.Can’t connect displays on my handset.• Place the handset in base cradle for 1 minute to allow the handset and base re-synchronize channels.• Move the handset closer to the base. You might have moved out of range.• If the handset is in its base and the charging light does not come on, refer to the charge light is off in this troubleshooting guide.• Reset the base. Unplug the unit’d electrical power. Wait for 15 sec-onds then plug it back in. Allow up to one minute for the handset and base to reset.• Other electronic products can cause interference with your cord-less phone. Try installing your phone as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, page towers, cell phones, intercoms, room monitors, televisions, per-sonal computers, kitchen appliances and cordless phones.The batteries will not hold a charge.• Charge the battery in the handset for 16 hours. For optimum daily performance, return the handset to its base when not in use.• You may need to purchase a new battery, please refer to the batteries section of this user’s manual.• You phone might be malfunctioning. please refer to the warranty sec-tion of this user’s manual for further instruction.
33AppendixImportant product informationThis symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.Safety Information• Read and understand all instructions in the user’s manual. Observe all markings on the product.• Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.• Do not use a telephone in the vicinity of a gas leak. If you suspect a gas leak, report it immediately, but use a telephone away from the area where gas is leaking. If this product is a cordless model, make sure the base is also away from the area.• Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly.• Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion.• If this product does not operate normally, read “In Case of Difficulty” in the user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited Warranty. Do not open this product except as may be directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks.• If this product has user-replaceable batteries, replace batteries only as described in your user’s manual. Do not burn or puncture batteries — they contain caustic chemicals.• If this product has a three-prong (grounding) plug or a polarized plug with one wide prong, it may not fit in non-polarized outlets. Do not defeat the purpose of these plugs. If they do not fit in your outlet, the outlet should be replaced by an electrician. CAUTION: Use only the power adapter provided with this product. To obtain a replacement, call 1-800-222–3111.
34AppendixSave these instructionsEspecially About Cordless Telephones• Privacy: The same features that make a cordless phone convenient create some limitations. Telephone calls are transmitted between the base and the handset by radio waves, so there is a possibility that your cordless phone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless phone conversations as being as private as those on corded phones.• Electrical Power: The base unit of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the handset if the base unit is unplugged or switched off, or if the electrical power is interrupted.• Potential TV Interference: Some cordless telephones operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the base unit of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. (Applies to 25-channel cordless phones only.)• Rechargeable Batteries: This product contains either Nickel-Cadmium or Nickel-Metal Hydride rechargeable batteries. Exercise care in handling batteries in order not to short the battery with conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.• Nickel-Cadmium Rechargeable Batteries: Must be recycled or disposed of properly. Do not dispose of in household garbage. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.The RBRC™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle Nickel-Cadmium rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1 800 8BATTERY for locations accepting spent Nickel-Cadmium Batteries. Nickel-Metal Hydride Rechargeable Batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.• Nickel-Metal Hydride Rechargeable Batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.
35AppendixSave these instructionsPrecautions for Users of Implanted Cardiac PacemakersCardiac Pacemakers (applies only to 900 MHz Digital Cordless Telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a mul-tidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR had recommended to physicians that:PACEMAKER PATIENTS• Should keep wireless phones at least six inches from the pacemaker.• Should NOT place wireless phones directly over the pacemaker, such as in a breast pocket, when it is turned ON.• Should use the wireless phone at the ear opposite the pacemaker.WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless phones.Especially About Telephones Answering SystemsTwo-Way Recording: This unit does not sound warning beeps to let the other party know that the call is being recorded. To ensure that you are in compliance with any federal or state regulations regarding recording a telephone call, you should start the recording process and then inform the other party that you are recording the call.
36AppendixFCC Part 68 and ACTAThis equipment complies with Part 68 of the FCC rules and with technical require-ments adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.The plug and jack used to connect this equipment to premises wiring and the tele-phone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with thisproduct. It is designed to be connected to a compatible modular jack that is also com-pliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual.The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your localtelephone company.This equipment may not be used with Party Lines. If you have specially wired alarm dial-ing equipment connected to your telephone line, ensure the connection of this equip-ment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephonecompany or a qualified installer.If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow theinstructions outlined under the Limited Warranty.If this equipment is causing harm to the telephone network, the telephone com-pany may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned.If this product is equipped with a corded or cordless handset, it is hearing aid compat-ible.
37AppendixFCC Part 15If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:• Remain on the line and briefly explain the reason for the call before hanging up.• Perform such activities in off-peak hours, such as early morning or late evening. This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-rect the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The base unit shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. If you choose to use a clipping device, please make sure to only use the supplied AT&T belt clip.
38AppendixLimited WarrantyThe AT&T brands are used under license. Any repair, replacement or warranty ser-vice, and all questions about this product should be directed to: Advanced American Telephones, 1-800-222-3111 or www.telephones.att.com. In Canada, call 1-866-288-4268.1 What does this limited warranty cover? The manufacturer of this AT&T-branded product, Advanced American Telephones (“AAT”), warrants to the holder of a valid proof of purchase (“CONSUMER” or “YOU”) that the product and all accessories provided by AAT in the sales package (“PRODUCT”) are free from material defects in material and workmanship, pursu-ant to the following terms and conditions, when installed and used normally and in accordance with operation instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America.2 What will AAT do if the Product is not free?from material defects in materials and workmanship during the limited warranty period (“MATERIALLY DEFECTIVE PRODUCT”)? During the limited warranty period, AAT’s authorized service representative will repair or replace, at AAT’s option, without charge, a Materially Defective Product. If AAT repairs this product, AAT may use new or refurbished replacement parts. If AAT chooses to replace this product, AAT may replace it with a new or refurbished product of the same or similar design. AAT will return repaired or replacement products to you in working condition. AAT will retain defective parts, modules, or equipment. Repair or replacement of Product, at AAT’s option, is your exclusive remedy. You should expect the repair or replacement to take approximately 30 days.3 How long is the limited warranty period? The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If AAT repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to repaired or replacement Products for a period of either (a) 90 days from the date the repaired or replace-ment Product is shipped to you or (b) the time remaining on the original one-year limited warranty, whichever is longer.
39AppendixLimited Warranty4 What is not covered by this limited warranty? This limited warranty does not cover:• Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or• Product that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of AAT; or• Product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or• Product to the extent that the problem is caused by use with non-AAT accessories; or• Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or• Product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or• Product returned without valid proof of purchase (see 6 below); or• charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit.5 How do you get warranty service? To obtain warranty service in the United States of America, call 1-800-222-3111 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage dur-ing transit and transportation and are responsible for delivery or handling charges incurred in the transport of Product(s) to the service location. AAT will return repaired or replaced Product under this limited warranty to you, transportation, delivery or handling charges prepaid. AAT assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, AAT will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.
40AppendixLimited Warranty6 What must you return with the Product to get warranty service? You must:a return the entire original package and contents including the Product to the AAT service location along with a description of the malfunction or difficulty;b include “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt (keep a copy for your records); andc provide your name, complete and correct mailing address, and telephone number. 7 Other limitations This warranty is the complete and exclusive agreement between you and AAT. It supersedes all other written or oral communications related to this Product. AAT provides no other warranties for this product. The warranty exclusively describes all of AAT’s responsibilities regarding the product. There are no other express warran-ties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State Law Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Limitations: Implied warranties, including those of fitness for a particular purpose and merchant-ability (an unwritten warranty that the product is fit for ordinary use) are limited to one year from date of purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall AAT be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the product, or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your receipt as your proof of purchase.
41AppendixTechnical specificationsRF Frequency Band(Handset to base) 921.4 MHz — 927.2 MHzRF Frequency Band(Base to handset) 2400.9 MHz — 2405.1 MHzChannels 30Operating Temperature 32 —122 F 0°C — 50°CBase Unit Voltage(AC Voltage, 60Hz) 120V AC 60HzBase Unit Voltage(AC Adapter Output) E2116: 9V DC 300mA E2116: 9V DC 400mAHandset Voltage 3.6V 600mAH Ni-Cd Battery
Copyright © 2005 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 11/05.91-000667-010-000www.telephones.att.com

Navigation menu