VTech Telecommunications 80-6470-00 1.9GHZ CORDLESS PHONE- BASE UNIT User Manual USERS MANUAL 1

VTech Telecommunications Ltd 1.9GHZ CORDLESS PHONE- BASE UNIT USERS MANUAL 1

Contents

USERS MANUAL 1

User’s manual TL7610/TL7611DECT 6.0 cordless headset
Congratulations on your purchase of this AT&T product.Before using this AT&T product, please read the Important safety information on pages 46-49 of this manual.Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.Model #: TL7610 (Headset and headset base) TL7611 (Headset, headset base and handset lifter)Type: DECT 6.0 cordless headsetSerial # : Purchase date : Place of purchase : Both the model and serial number of your AT&T product can be found on the bottom of the headset base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. The ENERGY STARR program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STARR label indicating it meets the latest energy efficiency guidelines.© 2008 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a AT&T Intellectual Property licensed to Advanced American Telephones. Printed in China.
Headset base Battery for headsetCordless headsetTelephone line cords(2-conductor)User's manual Quick start guideHeadset base power adapterOver-the-ear hookUser’s manual TL7610/TL7611DECT 6.0 cordless headset Quick start guideTL7610/TL7611DECT 6.0 cordless headset Behind-the-neckband Over-the-headbandParts checklist - TL7610Check to make sure the headset package includes the following items:Line splitterBattery compartment coverBattery PackBT1915453.7V 260mAh Li-ion PolymerWARNING: DO NOT BURNOR DISASSEMBLE ORPUNCTURE BATTERIESMADE IN CHINA
Headset base Battery for headsetCordless headsetTelephone line cords(4-conductor and 2-conductor)TL7610/7611 User's manualTL7610/7611 Quick start guideHeadset base power adapterOver-the-ear hookUser’s manual TL7610/TL7611DECT 6.0 cordless headset Quick start guideTL7610/TL7611DECT 6.0 cordless headset Behind-the-neckband Over-the-headbandParts checklist - TL7611Check to make sure the headset package includes the following items:Line splitterBattery compartment coverBattery PackBT1915453.7V 260mAh Li-ion PolymerWARNING: DO NOT BURNOR DISASSEMBLE ORPUNCTURE BATTERIESMADE IN CHINARemote handset lifterRing detectorTL7000 User's manualLarge lifter pad Anti-slip pad Color label(light blue)
User’s manualTL7610/TL7611DECT 6.0 cordless headset Getting startedQuick reference guide headset ......................................1 headset base ...........................2Installation preparation ............4Headset base installation ........5Battery installation .................. 10Battery charging ....................... 11Headset attachments ...................12 OperationHeadset base settings ........... 20Headset operation ................... 21Options while on calls ........... 24Alert tones ..........................................27Indicator lights..................................28Registration and de-registrationAdding and registering headset ................................ 30Replacing a headset ............... 32Maintenance and TroubleshootingTroubleshooting ........................ 34 Important safety information ............................ 46Maintenance................................ 50Appendix AFCC Part 68 and ACTA........... 51Appendix BFCC Part 15 ................................. 54Appendix CLimited warranty ....................... 56Technical specifications ........ 60IndexIndex ............................................... 61Table of contents
1Getting startedQuick reference guide - headsetON/OFFPress to make, answer and end a call.The light is on when the headset is charging in the headset base. The light flashes when you are on a call or when there is an incoming call (page 28).VOLUME Press the volume key on the side of the headset to adjust the listening volume when on a call. MUTE/FLASHPress to mute the microphone during a call (page 26). Press and hold to receive call waiting during a call (page 25).Press to mute the ring tone in the earpiece when there is an incoming call.Battery coverOpen to install or replace the battery.MicrophoneEARPIECE
2Getting startedQuick reference guide - headset baseCharging cradleInsert the headset here for charging.PAIRPress to register or de-register the headset. NO LIFTER MODE light On when NO LIFTER MODE is selected.Flashes while on a call or another telephone is in use on the same line.Flashes quickly when there is an incoming call.LIFTER MODE lightOn when the LIFTER MODE is selected.Flashes while on a call.Flashes quickly when there is an incoming call.MUTE lightOn when the call is muted.
3Getting startedVOLUME Press the volume keys on the side of the headset base to adjust the speaking volume when on a call. MODEPress to choose between the NO LIFTER or LIFTER MODE when the headset is not in use. The corresponding light will come on (see page 20). LIFTER AUDIO ADJUSTAdjust the switch to choose the best headset audio quality when using a handset lifter. (See the handset lifter user's manual for more information. You may download the manual at www.telephones.att.com.)Quick reference guide - headset base
4Getting startedAvoid placing the headset base too close to:• Communication devices such as: television sets, VCRs, or other cordless telephones.• Excessive heat sources.• Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting.• Excessive dust sources such as a workshop or garage.• Excessive moisture.• Extremely low temperature.• Mechanical vibration or shock such as on top of the washing machine or work bench.Installation preparationSee pages 10-11for easy instructions.You must install and charge the battery before using the headset. STOP!If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter will prevent noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
5Getting startedHeadset base installationIMPORTANT: If you purchased model TL7611, see the TL7000 handset lifter manual for installation instructions.Optional accessoriesIt is recommended that you install a handset lifter (model TL7000) and/or a dial pad (model TL7601) with your headset. The following optional accessories are compatible with your headset and base:The TL7000 is a handset lifter with ring detector. The TL7601 is a dial pad that allows you to dial numbers and place calls without being near your telephone. The dial pad will also allow you to use the headset as a stand-alone product without needing a connection to a telephone.The TL7600 is an expansion headset (up to two headsets can be used with the headset base).Visit our website www.telephones.att.com for more information about these products or to download user manuals.•••TL7000 TL7601 TL7600
6Getting startedHeadset base installationIf you are installing the headset base with neither the lifter nor the dial pad, there are two installation options:Option 1: You may use the headset as a stand-alone product without a phone. You will only be able to receive calls. If you want to make calls, an accessory dial pad (model TL7601, sold separately) is required.The headset base and headset do not have an external ringer. When you receive calls, the headset earpiece will play ring tone. If you have telephones connected to the same telephone line as the headset base, you can rely on the ringers of those telephones to alert you to incoming calls. -OR-Option 2: You may use the headset with a corded or cordless phone.If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack. The filter will prevent noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.••
7Getting startedHeadset base installationBefore installing the headset base:Remove the rear bottom piece of the headset base by pushing it away from the base (as shown in Figure 1).Install the headset base as shown on the following pages. After completing installation option 1 or 2: Slide the rear bottom piece towards the base until it clicks into place (as shown in Figure 2).Figure 1Figure 2
8Getting startedHeadset base installationOption 1: Headset base stand-alone installation (TL7610)With this installation, you can receive calls only. NOTE: For more information about the accessory dial pad (model TL7601), visit our website www.telephones.att.com.1. Plug the small end of the headset base power adapter into the POWER jack (green dot) at the back of the headset base.2. Plug one end of the telephone line cord into the TEL WALL JACK (red dot) at the back of the headset base.DSL filter (not included) required if you have DSL high-speed Internet service.Telephone line cord3. Plug the other end of the telephone line cord into a telephone jack.4. Plug the headset base power adapter into an electrical outlet not controlled by a wall switch.
9Getting startedHeadset base installationOption 2: Headset base with corded or cordless phone (any brand) installation (TL7610)With this installation, you can make and receive calls using the corded or cordless phone. 1. Plug the small end of the headset base power adapter into the POWER jack (green dot) at the back of the headset base.2. Plug one end of the telephone line cord into the TEL WALL JACK (red dot) at the back of the headset base.DSL filter (not included), required if you have DSL high-speed Internet service.Telephone line cord3. Plug the other end of the telephone line cord connected into the line splitter. 6. Plug the headset base power adapter into an electrical outlet not controlled by a wall switch.Line splitterCorded or cordless phone5. Connect another telephone line cord between the corded phone and the line splitter. 4. Plug the line splitter into the telephone wall jack (or DSL filter if you subscribe to DSL internet service).
10Getting startedBattery installationInstall the battery as shown below. After installing the battery, you may be able to make and receive short calls. For optimal performance, charge the headset battery for at least six hours before use. When not in use, recharge the headset by returning it to the headset base.1. Press in on both sides of the battery compartment cover and lift the cover up and off. 2. Insert the battery into the battery compartment. 3. Push the battery plug into the connector inside the compartment and lay the wires flat on top of the battery.4. Insert the tab on the bottom of the battery cover into the battery compartment. Press down gently on the battery cover until it snaps into place.Battery PackBT1915453.7V 260mAh Li-ion PolymerWARNING: DO NOT BURNOR DISASSEMBLE ORPUNCTURE BATTERIESMADE IN CHINANOTE: Remove the ear hook from the headset (see page 14) before battery replacement.

Navigation menu