VTech Telecommunications 80-8382-00 DECT 6.0 Cordless Phone with Headset - Base Unit User Manual TL7600
VTech Telecommunications Ltd DECT 6.0 Cordless Phone with Headset - Base Unit TL7600
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2973774 |
| Application ID | AyAVQmW9qB+iCfBPGnLtpg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 484.08kB (6051001 bits) |
| Date Submitted | 2016-04-28 00:00:00 |
| Date Available | 2016-04-28 00:00:00 |
| Creation Date | 2016-04-28 15:04:26 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2016-04-28 15:04:26 |
| Document Title | user manual_TL7600.pdf |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | ynsiu |
User’s manual TL7600 DECT 6.0 accessory cordless headset Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read Important safety information on pages 35-38 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model number: TL7600 (Headset and headset charger) Type: DECT 6.0 accessory cordless headset Serial number: Purchase date: Place of purchase: Both the model and serial numbers of your AT&T product can be found on the bottom of the headset charger. Save your sales receipt and original packaging in case it is necessary to return your product for warranty service. © 2008-2013 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Parts checklist Check to make sure the headset package includes the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual TL7600 DECT 6.0 accessory cordless headset User's manual Headset charger Charger power adapter Cordless headset Battery compartment cover Behind the neck band Over the ear hook Battery for headset Over the head band User’s manual TL7600 DECT 6.0 accessory cordless headset Table of contents Getting started Quick reference guide headset............................................ 1 Headset lights.......................... 1 Headset alert tones .............. 3 Quick reference guide headset charger.......................... 4 Installation preparation........... 5 Charger installation................... 6 Battery installation .................... 7 Battery charging ......................... 8 Registering the headset.......... 9 To register a headset to the DECT headset base.... 10 To register the headset to an AT&T DECT cordless telephone base .................... 11 Headset attachments ............ 12 Over the ear hook .............. 12 Over the head band........... 15 Behind the neck band ...... 17 Operation Headset operation .................. 19 Making a call ......................... 19 Answering a call on the headset..................................... 20 Ending a call on the headset ............................ 20 Auto off .................................... 20 Temporary ring tone silencing................................... 21 Intercom calls and transfers................................... 21 Options while on calls.......... 22 Volume control..................... 22 Call waiting ............................ 22 Switching a call between handset and headset......... 23 Multiple headset/ handset use............................ 24 Mute........................................... 24 Replacing a headset .............. 25 To deregister all headsets from your TL7610/TL7611/TL7612 headset base ......................... 25 To deregister all headsets from an AT&T cordless telephone base .................... 26 Appendix Troubleshooting ....................... 27 Important safety information ................................. 35 Especially about cordless headsets .................................. 36 Precautions for users of implanted cardiac pacemakers ............................ 38 Pacemaker patients ........... 38 Maintenance............................... 39 FCC, ACTA and IC regulations.................................. 40 Limited warranty...................... 45 Technical specifications ....... 49 DECT 6.0 digital technology.............................. 49 Operating range................... 49 Extended range and clarity ........................................ 49 Index Index .............................................. 50 Getting started Quick reference guide - headset ON/OFF Press to make, answer, or end a call. Headset lights ON/OFF light status On • Headset is charging in the headset charger. • Headset is trying to register to the headset base or telephone base. • Headset is searching for the headset base. Flash • Flashes slowly when incorrect battery is installed. • Flashes three times, followed by a pause. This cycle repeats three more times and then shuts down to indicate the battery level is very low. • Flashes twice every five seconds to indicate the headset is not registered. • Flashes every 20 seconds to indicate the battery is low and needs to be charged in the headset charger. • Flashes every three seconds to indicate the headset is in use. • Flashes quickly when there is an incoming call. Getting started Quick reference guide - headset VOLUME /+ – Press the volume keys on the side of the headset to adjust the listening volume when on a call (page 22). MUTE/FLASH Press to mute the microphone during a call (page 24). Press and hold to receive call waiting during a call (page 22). EARPIECE Press to mute the ring tone in the earpiece when there is an incoming call (page 21). Battery compartment cover Remove to install or replace the battery (page 7). Microphone Getting started Quick reference guide - headset Headset alert tones Three quick beeps. • A VOLUME /+ – key is pressed when the volume is already at its highest or lowest setting. • The headset is not registered and the headset ON/OFF button is pressed. • The headset has gone out of range from the headset base during a call. One short beep every 20 seconds. • Low battery warning. One short beep every 15 seconds. • The call is muted. One long beep repeated. • Call waiting alert tone. One short beep. • The headset ON/OFF key is pressed to go on hook or off hook. Getting started Quick reference guide - headset charger Charging cradle Place the headset here for charging. Power cord groove Place the power cord here. Power jack Plug the small end of the charger power adapter here. Getting started Installation preparation You must install and charge the battery before using the headset. STOP! See pages 6-8 for easy instructions. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the headset charger too close to: • Communication devices such as television sets, VCRs, or other cordless telephones. • Excessive heat sources. • Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. • Excessive dust sources such as a workshop or garage. • Excessive moisture. • Extremely low temperature. • Mechanical vibration or shock such as on top of a washing machine or work bench. Getting started Charger installation 1. Plug the small end of the charger power adapter into the power jack at the bottom of the headset charger. Place the power cord in the power cord slot. 2. Plug the charger power adapter into a power outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. Getting started Battery installation Install the battery as shown below. For optimal performance, charge the headset battery for at least six hours before use. When fully charged, the headset battery provides approximately 10 hours of talk time or 5 days of standby time. When the headset is not in use, recharge by returning it to the headset base. 1. If the battery compartment cover is attached, press on both sides of the battery compartment cover and lift it up and off. 2. Insert the battery into the battery compartment with the label THIS SIDE UP facing up. 3. Push the battery plug into the connector inside the compartment according to the color-coded label and place the wires neatly inside the compartment. 4. Insert the tab on the bottom of the battery compartment cover into the battery compartment. 5. Press down gently on the battery compartment cover until it snaps into place. NOTE: Remove the ear hook from the headset (see page 14) before battery replacement. Getting started Battery charging After installing the battery, charge the headset by placing it on the headset charger as shown below. Before registration, the headset ON/OFF light flashes twice every five seconds whether the headset is charging or not. After registration, the headset ON/OFF light is on when the headset is charging. Push ON/OFF light Insert 1. Insert the headset into the charging cradle. 2. Push the headset downward until the ON/OFF light on the headset turns on. IMPORTANT INFORMATION Use only the supplied rechargeable battery or replacement battery (model BT191545). To obtain a replacement battery, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Getting started Registering the headset You must register your new TL7600 headset with one of the following models before use: • AT&T DECT cordless headset TL7610/TL7611/TL7612 (see page 10). You can register a maximum of two headsets to each headset base. -OR• A compatible AT&T DECT cordless telephone (see page 11). You can register a maximum of two headsets to each cordless telephone. The telephone base recognizes and counts a headset the same as a handset. Refer to your telephone user’s manual for the maximum number of handsets that you can register to the telephone base. If you have the maximum number of handsets registered, you need to follow the deregistration information in your telephone user’s manual. Visit www.telephones.att.com/headsets for a list of compatible telephones. The first headset provided with your TL7610/TL7611/TL7612 has a blue ON/OFF light. When you register a second headset, the ON/OFF light of that headset turns orange to help you identify the headsets. You can only register the headset to one product at a time, so the headset must not be already registered before registering to a headset base or a cordless phone. NOTE: See pages 25-26 for instructions on deregistration. Getting started Registering the headset To register a headset to a TL7610/TL7611/TL7612 DECT headset base 1. Make sure the battery is properly installed in the headset (see page 7). The ON/OFF light flashes twice every five seconds to indicate the headset is not registered. 2. Place the headset in the headset base or charger and allow it to charge for at least five minutes before beginning registration. 3. Remove the headset from the headset base or charger. 4. On the headset base, press and hold the PAIR button until the MUTE light on the headset base turns on (about four seconds) and release the button. 5. Return the headset to the headset base for registration. Registration may take about 30 seconds to complete. The MUTE light on the headset base turns off. The headset ON/OFF light turns blue on the first headset registered and orange on the second headset registered. To verify registration was successful, press the headset ON/OFF button and check for a dial tone. If the registration was not successful, the ON/OFF light on the headset flashes twice every five seconds. To reset the headset, remove the headset from the headset charger and try the registration process again. 10 Getting started Registering the headset To register the headset to an AT&T DECT cordless telephone base 1. Make sure the battery is properly installed in the headset (see page 7). The ON/OFF light flashes twice every five seconds to indicate the headset is not registered. 2. Place the headset in the headset charger and allow it to charge for at least five minutes before beginning registration. Remove the headset from the charger and then place the headset back into the charger. 3. On the telephone base of the cordless phone, press and hold the /HANDSET LOCATOR button until the IN USE light turns on (about four seconds) and release the button. If your telephone base has no HANDSET LOCATOR button: Press and hold the HOLD button until the screen displays Registering... Please wait, then release the button. -ORPress and hold the LOCATOR button until the screen displays Registering handset..., then release the button. 4. The headset registers to the telephone base automatically; this may take about 30 seconds to complete. The headset ON/OFF light turns blue on the first headset registered and orange on the second headset registered. To verify registration was successful, press the headset ON/OFF button and check for a dial tone. NOTES: • If the registration fails, the ON/OFF light on the headset flashes twice every five seconds. Reset the headset and try again. Remove the headset from the headset base and press ON/OFF. Place the headset back into the headset base. Try the registration process again. • For users of Synapse , SynJ , MS2085 Console, or MS2015 Deskset, refer to the user’s manual of your respective model for registration instructions. Synapse and SynJ are trademarks of Advanced American Telephones. 11 Getting started Headset attachments Over the ear hook To attach the ear hook to the headset: 1. Remove any headset attachment connected to the headset. 2. Insert the earpiece into the ear hook, as shown in Figure 1. 3. Press the ear hook onto the earpiece, as shown in Figure 2. 4. Hook the headset onto the desired ear. Adjust the angle of the headset until the microphone is pointing towards your mouth, as shown in Figure 3. Figure 1 Figure 2 Figure 3 NOTE: Firmly grip the earpiece with one hand whenever adjusting the headset microphone up or down, as shown in Figure 3. 12 Getting started Headset attachments To adjust the headset to wear on the other ear: 1. Hold the headset in your hand. Lift the hook upward, as shown in Figure 4. 2. ǍǔnjƋin a counterclockwise direction, as shown in Figure 5. 3. Push the hook downward, as shown in Figure 6. 4. Hook the headset onto the desired ear. Adjust the angle of the headset until the microphone is pointing towards your mouth, as shown in Figure 7. ǍǔnjƋ Figure 5 Figure 4 Figure 7 Figure 6 13 Getting started Headset attachments To remove the ear hook from the headset: Hold the headset with one hand and the ear hook with the other hand. Lift the ear hook up until it separates from the earpiece. 14 Getting started Headset attachments Over the head band To attach the headset to the headband for wearing on the left or right ear: 1. Remove any headset attachment currently connected to the headset. 2. Insert the earpiece into the loop of the ear pad, as shown in Figure 8. 3. Gently press the earpiece inward until it clicks into place, as shown in Figure 9. 4. Adjust the headband to fit your head. Adjust and rotate the angle of the headset until the microphone is pointing towards your mouth, as shown in Figure 10. Ear pad Figure 8 Figure 9 Figure 10 NOTES: • To wear on the other ear, rotate the headset within the loop of the ear pad. • Firmly grip the padded earpiece with one hand whenever adjusting the headset microphone up or down, as shown in Figure 10. 15 Getting started Headset attachments To remove the headset from the headband: Hold the headset with one hand and the headband's ear pad with the other hand. Twist and pull the headset until it separates from the ear pad. 16 Getting started Headset attachments 4. Place the neckband around your neck and over your ears. 5. Adjust and rotate the angle of the headset until the microphone is pointing towards your mouth, as shown in Figure 14. Figure 14 NOTE: Firmly grip the padded earpiece with one hand whenever adjusting the headset microphone up or down, as shown in Figure 14. To remove the neckband from the headset: Hold the headset with one hand and the ear pad with the other hand. Twist and pull the headset until it separates from the ear pad. 18 Operation Headset operation Making a call If you registered the accessory cordless headset to a headset base, see the user’s manual for your headset base model TL7610/TL7611/TL7612 for additional instructions. Visit www.telephones.att.com/manuals to view or download the user's manuals. If you registered the accessory cordless headset to an AT&T DECT cordless telephone: 1. Follow the instructions in your telephone user’s manual for making calls. 2. To switch to the headset, press ON/OFF on the headset at any time. 3. After you switch the call to the headset,, you can hang up the telephone and continue the call on the headset. 19 Operation Headset operation Answering a call on the headset Press ON/OFF on the headset. Ending a call on the headset Press ON/OFF on the headset. Auto off A call ends automatically when you put the headset in the headset charger. NOTE: The headset does not have an external ringer. When you receive calls, the headset earpiece plays a ring tone only heard through the earpiece. 20 Operation Headset operation Temporary ring tone silencing Press MUTE/FLASH to temporarily silence the ring tone in the headset earpiece. This silences the ring tone without disconnecting the call. The next incoming call rings normally at the preset volume. NOTE: If you have more than one headset registered to the headset base, both headsets receive the ring tone when there is an incoming call. Pressing MUTE/FLASH on one headset will only silence the ring tone of that particular headset. Intercom calls and transfers If you have registered your headset to an AT&T DECT cordless telephone, follow the instructions in your telephone user’s manual for intercom calls and transfers. When the cordless handset prompts you to enter a handset number: • If you have 1 registered handset, press # (pound key) on the cordless handset. • If you have 2 registered handsets, press #1 for headset 1 and #2 for headset 2. NOTE: You can only make intercom calls or transfers from an AT&T DECT cordless handset to the DECT cordless headset. 21 Operation Options while on calls Volume control To adjust the listening volume: While on a call, press the VOLUME /+ – keys on the side of the headset to adjust the listening volume. NOTE: When the volume reaches the minimum or maximum setting, you hear 3 quick beeps. Call waiting If you subscribe to call waiting service offered by your telephone service provider, you hear a beep if there is an incoming call while you are already on a call. • If you have registered the TL7600 to a TL7610/TL7611/TL7612 headset base that is connected to a multiple line or digital business corded telephone, you must answer call waiting using the corded telephone base (see your telephone user’s manual for instructions). To end call waiting call, press ON/OFF on the headset and hang up the corded handset by placing it in the telephone base. • For all other installations, press and hold MUTE/FLASH on the side of the headset to put your current call on hold and answer the new call. You can press and hold MUTE/FLASH at any time to switch back and forth between calls. To end a call waiting call, press ON/OFF on the headset. 22 Operation Options while on calls Switching a call between handset and headset If you have registered the TL7600 to a TL7610/TL7611/TL7612 headset base that is plugged into the telephone wall jack: • To switch from the corded handset to a headset while on a call, press ON/OFF on the headset, then place the corded handset back into the telephone base. • To switch from a headset to the corded handset while on call, lift the corded handset from the telephone base, then press ON/OFF on the headset. • To switch from a cordless handset to a headset while on a call, press ON/OFF on the headset, then hang up the cordless handset. • To switch from a headset to a cordless handset while on a call, press the button you use to answer a call, then press ON/OFF on the headset. If you have registered the TL7600 to a TL7610/TL7611/TL7612 headset base that is connected to a multiple line or digital business corded telephone: To switch between a headset and the corded handset while on a call, press ON/OFF on the headset. NOTE: For information about installation options, see the user’s manual for your headset base model TL7610/TL7611/TL7612. Visit www.telephones.att.com/manuals to view or download the user manuals. 23 Operation Options while on calls Multiple headset/handset use Headsets and handsets on the same phone line can join an external call in progress. The number of headsets and handsets that can join may be limited by your telephone system. See your telephone user’s manual for more information. Join a call with a headset by pressing ON/OFF on the headset. To hang up, press ON/OFF or place the headset in the headset charger. Mute The mute function allows you to turn off the headset microphone. You can hear the caller, but the caller cannot hear you. To mute the call: • Press MUTE/FLASH on the headset to turn off the headset microphone. When mute is on, there is a short beep every 15 seconds until mute is turned off. To end mute: • Press MUTE/FLASH on the headset again and resume speaking. 24 Operation Replacing a headset You may need to deregister your headsets if: You have two registered headsets and need to replace one of them. -ORYou wish to change the designated headset number and/or the colors of the ON/OFF lights of your registered headsets. You must first deregister both headsets, and then register each headset you wish to use again, one at a time. Please read carefully through all the instructions before beginning the deregistration process. To deregister all headsets from your TL7610/TL7611/TL7612 headset base This procedure deregisters all the items registered to the headset base. 1. Press and hold PAIR on the TL7610/TL7611/TL7612 headset base until the MUTE light on the headset base turns on and starts to flash (at least 10 seconds), then release the PAIR button. 2. Immediately press and release PAIR again. You must press PAIR while the MUTE light is still flashing. (The light flashes for about seven seconds. If the light stops flashing, start again with step one above.) 3. Enter the following code on the headset by pressing the keys in this order: VOLUME /+, MUTE, VOLUME /–, MUTE, VOLUME /+, VOLUME /–, MUTE. When you see the MUTE light on the headset base turn off and the headset(s) ON/OFF light flashes twice every five seconds, the deregistration is successful. Repeat this step on the other headset if there is any. 4. To register the headset(s) to the headset base again, follow the registration instructions on page 10. NOTES: • If the deregistration process was not successful, you may need to reset the system and try again. Remove the headset from the headset base and press ON/OFF. Place the headset back into the headset base. You may also reset by unplugging the power from the headset base, then waiting a few seconds, and plugging it back in. • You cannot deregister the headset(s) if another system headset is in use. 25 Operation Replacing a headset To deregister all headsets from an AT&T cordless telephone base This procedure deregisters all the headsets and handsets registered to the cordless phone. 1. Press and hold / HANDSET LOCATOR on the telephone base of the cordless phone until the IN USE light on the telephone base turns on and starts to flash (at least 10 seconds), then release the / HANDSET LOCATOR button. 2. Immediately press and release / HANDSET LOCATOR again. You must press / HANDSET LOCATOR while the IN USE light is still flashing. (The light flashes for about 7 seconds. If the light stops flashing, start again with step one above.) This process may take up to 10 seconds to complete. If your telephone base has no HANDSET LOCATOR button: i. Press and hold the FLASH button until the screen displays Deregister all handsets?, then release the button. ii. Press YES softkey. -ORi. Press and hold the LOCATOR button until the screen displays Registering handset... followed by Deregister all handsets?, then release the button. ii. Immediately press and release MENU/SELECT again. 3. Enter the following code on the headset by pressing the keys in this order: VOLUME /+, MUTE, VOLUME /–, MUTE, VOLUME /+, VOLUME /–, MUTE. The ON/OFF light on the headset flashes twice every five seconds if the deregistration is successful. NOTES: • See your telephone user’s manual to register the handsets again. • See page 11 of this manual to register a headset again. 26 Appendix Troubleshooting If you have difficulty with your headset, please try the suggestions below. For customer service, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. My headset doesn’t work at all. • Make sure the power cord is securely plugged in. • Make sure the battery is securely installed in the cordless headset. • Make sure the telephone line cord is securely and firmly plugged into the headset or telephone base and the telephone wall jack. • Charge the battery in the cordless headset for at least 6 hours. For optimum daily performance, return the cordless headset to its charger when not in use. • Reset the headset. Power off the headset and then power it on. • Reset the headset base or charger. Unplug the unit’s electrical power. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless headset and headset base or charger to reset. • You may need a new battery. Please refer to page 7 of this user’s manual. I cannot get a dial tone. • Try all the suggestions above. • Move the cordless headset closer to the headset or telephone base. You might have moved out of range. • If the previous suggestions do not work, disconnect the headset or telephone base from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or telephone service. Contact your telephone service provider. • Your telephone line cord might be defective. Try installing a new telephone line cord. 27 Appendix Troubleshooting I am getting a buzzing sound on my headset or corded base speakerphone. • Your telephone may experience interference from the headset. To overcome this problem, move the headset base at least 12 inches away from the telephone. • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless headset. Try installing your headset as far away as possible from these types of electronic devices. I cannot dial out. • Try all the suggestions above. • Make sure you have a dial tone before dialing. The cordless headset may take a second or two to find the headset or telephone base and produce a dial tone. This is normal. Wait an extra second before dialing. • Eliminate any background noise. Noise from a television, radio or other appliances may cause the headset to not dial out properly. If you cannot eliminate background noise, try dialing from another room with less background noise. • If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your telephone service provider (charges may apply). The other party cannot hear my voice during a call. • If you registered the accessory cordless headset to a headset base, try adjusting the speaking volume setting on the headset base. See the volume section of the user’s manual for your headset base model TL7610/TL7611/TL7612 for additional troubleshooting. Visit www.telephones.att.com/manuals to view or download the user manuals. 28 Appendix Troubleshooting My cordless headset isn’t performing normally. • Make sure the power cord is securely plugged into the headset base or charger. Plug the unit into a different, working electrical outlet not controlled by a wall switch. • Move the cordless headset closer to the headset or telephone base. You might have moved out of range. • Reset the headset base or charger. Unplug the unit’s electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless headset and headset base or charger to reset. • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless headset. Try installing your headset as far away as possible from these types of electronic devices. I want to use my headset with a different headset base or cordless telephone. • You need to deregister (see pages 25-26) the headset from the current headset or telephone base and then register (see pages 9-11) it to a new headset base or cordless telephone. The batteries do not hold a charge. • Make sure that the headset battery is installed and securely plugged into the connector. • If the cordless headset is in the headset base or charger and the ON/OFF light on the headset does not come on, refer to The ON/OFF light on the headset is off while charging in this Troubleshooting guide (page 32). • Charge the battery in the cordless headset for at least 6 hours. For optimum daily performance, return the cordless headset to the headset or charger when not in use. 29 Appendix Troubleshooting • You may need a new battery. Please refer to the Battery charging section on page 8. • Your headset might be defective. Please refer to the Limited warranty section on pages 45-48 for further instructions. I get noise, static, or weak signal even when I’m near the headset or telephone base. • If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. • You may be able to improve the performance of your cordless headset by installing your new headset base farther from any other existing cordless telephone system. • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless headset. Try installing your headset as far away as possible from these types of electronic devices. • Do not install this headset near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. • If your headset is plugged in with a modem or a surge protector, plug the headset (or modem/surge protector) into a different location. If this doesn't solve the problem, relocate your headset or modem farther apart from one another, or use a different surge protector. • Relocate your headset or telephone base to a higher location. You may experience better reception by elevating the headset or telephone base. • If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). 30 Appendix Troubleshooting I hear other calls while using my headset. • Disconnect the headset or telephone base from the telephone jack, and plug in a different telephone. If you still hear other calls, the problem is probably in your building’s wiring or local service. Call your telephone service provider. I cannot hear a ring tone from the headset when there is an incoming call. • If you have pressed MUTE/FLASH on the headset when it is ringing, it mutes the ring tone of the headset. The ring tone resumes on the next call. • You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones. • The layout of your home or office might be limiting the operating range. Try moving the headset or telephone base to another location, preferably on an upper floor. • Test a working phone at the phone jack. If another phone has the same problem, the problem is the phone jack, wiring or service. Contact your telephone service provider (charges may apply). • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless headset. Try installing your headset as far away as possible from these types of electronic devices. • Install the battery again, and place the cordless headset in the headset base or charger. Wait for the cordless headset to reestablish its connection with the headset or telephone base. Allow up to one minute for this to take place. • Your telephone line cord might be defective. Try installing a new telephone line cord. 31 Appendix Troubleshooting My calls cut in and out while I’m using my cordless headset. • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless headset. Try installing your headset as far away as possible from these types of electronic devices. • Do not install this headset near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. • If your headset is plugged in with a modem or surge protector, plug the headset (or modem/surge protector) into a different location. If this doesn't solve the problem, relocate your headset or modem farther apart from one another, or use a different surge protector. • Relocate your headset or telephone base to a higher location. You may experience better reception by elevating the base. • If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your telephone service provider (charges may apply). The ON/OFF light on the headset is off while charging. • Make sure the power and line cords are plugged in correctly and securely. • Make sure that the battery connector is securely plugged into the cordless headset. • Push the headset downwards in the charger until the ON/OFF light on the headset turns on. • Unplug the unit’s electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless headset and headset base or charger to reset. • Clean the cordless headset and headset base or charger charging contacts each month using a pencil eraser or cloth. 32 Appendix Troubleshooting • Your headset or headset base might be defective. Please refer to the Limited warranty section on pages 45-48 for further instructions. I cannot register the headset. For registration to a cordless telephone: • You must be using a compatible AT&T DECT 6.0 cordless telephone. Visit www.telephones.att.com/headsets for a list of compatible telephones. • Your cordless telephone has a maximum number of handsets that may be registered to the telephone base. In terms of registration, the telephone base treats a headset like a handset. Check the Adding and registering handsets section of your telephone user’s manual for the maximum number of handsets allowed. If the maximum number of handsets are already registered, you need to follow the deregistration instructions in the telephone user’s manual, then register the handsets and/or headsets you wish to use again, one at a time. For registration to a headset base: • You can register a maximum of two headsets to the headset base. If you already have two headsets registered to the headset base, you must deregister all the headset(s) before you register a different headset. • If you registered the accessory cordless headset to a headset base, see the user’s manual for your headset base model TL7610/TL7611/TL7612 for additional troubleshooting. Visit www.telephones.att.com/manuals to view or download the user's manuals. 33 Appendix Troubleshooting Common cure for electronic equipment. If the unit does not seem to be responding normally, try putting the cordless headset in its base or charger. If it does not seem to respond, do the following (in the order listed): • Disconnect the power to the headset charger and the headset or telephone base. • Disconnect the cordless headset battery. • Wait a few minutes. • Connect power to everything you unplugged. • Install the battery again, and place the cordless headset into the headset base or charger. • Wait for the cordless headset to reestablish its connection with the headset or telephone base. Allow up to one minute for this to take place. 34 Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a headset during a thunderstorm. There may be a slight chance of electric shock from lightning. • Do not use a headset in the vicinity of a gas leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the headset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the headset base into a power outlet, and should not put a charged headset into the cradle, if the headset base is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. • Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly. • Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion. 35 Appendix Important safety information • If this product does not operate normally, see the Troubleshooting section on pages 27-34 of this user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 45-48. Do not open this product except as may be directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks. • Replace batteries only as described in your user’s manual. Do not burn or puncture batteries — they contain caustic chemicals. • This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. Caution: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. Especially about cordless headsets • Privacy: The same features that make a cordless headset convenient create some limitations. Telephone calls are transmitted between the headset base and the headset by radio waves, so there is a possibility that your cordless headset conversations could be intercepted by radio receiving equipment within range of the cordless headset. For this reason, you should not think of cordless headset conversations as being as private as those on corded telephones. • Electrical power: The headset base of this cordless headset must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the headset if the headset base is unplugged or switched off, or if the electrical power is interrupted. 36 Appendix Important safety information • Potential TV interference: Some cordless headsets operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the headset base of the cordless headset near or on top of a TV or VCR. If interference is experienced, moving the cordless headset farther away from the TV or VCR will often reduce or eliminate the interference. • Rechargeable batteries: This product contains nickelcadmium, nickel-metal hydride or lithium-ion rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. • Lithium-ion rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle lithium-ion rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1-800-8-BATTERY for locations accepting spent Li-ion batteries. CAUTION • Use only the batteries provided or their equivalent. • Change this product’s batteries only in accordance with the instructions and limitations specified in this manual. • As with any batteries, do not allow conductive materials such as rings, bracelets, or keys to come in contact with the metallic parts of the battery. The battery or conductor may overheat and cause harm. 37 Appendix Important safety information • Do not open or damage the batteries. Released electrolyte is corrosive and may cause injury to the eyes or skin. The electrolyte may be toxic if swallowed. • Do not dispose of the batteries in a fire. Check with local waste management codes for special disposal instructions. • To prevent fire or shock hazard, do not expose this product to water or any type of moisture. • Observe proper polarity orientation between the battery and metallic contacts. • Do not disassemble your telephone. There are no user-serviceable parts inside. Refer to qualified service personnel for servicing. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable cordless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that: Pacemaker patients • Should keep cordless telephones at least six inches from the pacemaker. • Should NOT place cordless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. • Should use the cordless telephone at the ear opposite the pacemaker. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using cordless telephones. SAVE THESE INSTRUCTIONS 38 Appendix Maintenance Taking care of your headset • Your cordless headset contains sophisticated electronic parts, so it must be treated with care. • Avoid rough treatment. • Place the headset down gently. Save the original packing materials to protect your headset if you ever need to ship it. Avoid water • Your headset can be damaged if it gets wet. Do not use the headset outdoors in the rain, or handle it with wet hands. Do not install the headset base near a sink, bathtub or shower. Electrical storms • Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms. Cleaning your headset • Your headset has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or a mild soap. • Do not use excess water or cleaning solvents of any kind. Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the headset base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Pull the unit out by the unplugged cords. 39 Appendix FCC, ACTA and IC regulations FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g. if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your local telephone company. This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. 40 Appendix FCC, ACTA and IC regulations If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g. police, fire, medical) in these locations. If you do store or test emergency numbers, please: Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. 41 Appendix FCC, ACTA and IC regulations Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. This product meets the applicable Industry Canada technical specifications. 42 Appendix FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. 43 Appendix FCC, ACTA and IC regulations To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The headset may be safely held against the ear of the user. The headset base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B). 44 Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268. 1. What does this limited warranty cover? The manufacturer of this AT&T branded product warrants to the holder of a valid proof of purchase (“CONSUMER” or “you”) that the product and all accessories provided in the sales package (“PRODUCT”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends only to the CONSUMER for products purchased and used in the United States of America and Canada. 2. What will be done if the PRODUCT is not free from defects in materials and workmanship during the limited warranty period (“materially defective PRODUCT”)? During the limited warranty period, the manufacturer’s authorized service representative will repair or replace at the manufacturer’s option, without charge, a materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may use new or refurbished replacement parts. If the manufacturer chooses to replace the PRODUCT, they may replace it with a new or refurbished PRODUCT of the same or similar design. The manufacturer will retain defective parts, modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturer’s option, is your exclusive remedy. The manufacturer will return repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days. 45 Appendix Limited warranty 3. How long is the limited warranty period? The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer. 4. What is not covered by this limited warranty? This limited warranty does not cover: • PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or • PRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; or • PRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or • PRODUCT to the extent that the problem is caused by use with non-AT&T accessories; or • PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or • PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or • PRODUCT returned without valid proof of purchase (see item 6 below); -or46 Appendix Limited warranty • Charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. 5. How do you get warranty service? To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268. NOTE: Before calling for service, please review the user’s manual; a check of the PRODUCT controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty. 6. What must you return with the PRODUCT to get warranty service? You must: a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and c. Provide your name, complete and correct mailing address, and telephone number. 47 Appendix Limited warranty 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the PRODUCT or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase. 48 Appendix Technical specifications RF frequency band 1921.536MHz - 1928.448MHz Channels Operating temperature 32°F - 122°F 0°C - 50°C Headset voltage 3.2 - 4.2VDC Charger voltage (AC adapter output) 6VDC @400mA Replacement battery 3.7V 240mAH Li-ion Polymer DECT 6.0 digital technology Digital Enhanced Cordless Telecommunications (DECT) 6.0 is a new frequency band that transmits your voice across multiple channels. This technology provides superior quality of voice and sound, high protection against wiretapping and better range than 2.4 GHz and 5.8 GHz phone systems, while not interfering with wireless routers. Operating range This cordless headset operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this headset and headset base can communicate over only a certain distance — which can vary with the locations of the headset base and headset, the weather, and the construction of your home or office. Extended range and clarity Experience the best in long-range coverage and clarity, provided by a unique antenna design and advances in noise-filtering technology. The TL7600 is a fully cordless DECT 6.0 headset offering a range of up to 500 feet. Open range test was performed by Wyle Laboratories, an independent commercial test facility. “Up to 500 feet” cordless headset range refers to the maximum open field range. Actual range may vary depending on intervening obstacles. Sound level protection technology conforms to the current regulations and is used to filter out the loud and high-pitched noises. 49 Index Index Alert tone 3 Answer a call 20 Auto off 20 Maintenance 39 Make a call 19 Multiple headset/ handset use 24 Mute 24 Battery charging 8 Behind the neck band 17–18 Over the ear hook 12–14 Over the head band 15–16 Call waiting 22 Quick reference guide Headset 1–3 Headset charger 4 Deregister all headsets 25–26 Dial tone 27 End a call 20 Register a headset 9 Replace a headset 25 FCC Part 15 43–44 FCC Part 68 and ACTA 40–42 Switch a call 23 Technical specifications 49 Temporary ring tone silencing 21 Troubleshooting 27–34 Important safety information 35–38 Installation battery 7 charger 6 Intercom 21 Volume 22 Lights 1 Limited warranty 45–48 50 www.telephones.att.com © 2008-2013 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Synapse and SynJ are trademarks of Advanced American Telephones. Printed in China. Issue 14 AT&T 07/13.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2016:04:28 15:04:26+08:00 Modify Date : 2016:04:28 15:04:26+08:00 Metadata Date : 2016:04:28 15:03:51+08:00 Creator Tool : PScript5.dll Version 5.2.2 Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 5426 bytes, use -b option to extract) Document ID : uuid:F9EA905C0F0DE6119FC1DB4B216AF71C Instance ID : uuid:93dc1ec5-f198-4ae6-85f4-6a30b4ac9b2c Derived From Instance ID : uuid:e2fe4b00-d2ec-4351-8dc6-8006b09f10f9 Derived From Document ID : adobe:docid:indd:a649a1ed-ecf3-11e2-b4a2-b0e944b0ce48 Derived From Rendition Class : proof:pdf Format : application/postscript Title : user manual_TL7600.pdf Creator : ynsiu Page Count : 56 Author : ynsiuEXIF Metadata provided by EXIF.tools