VTech Telecommunications 80-9092-00 1.9GHz Digital Modulation Wireless Speaker User Manual

VTech Telecommunications Ltd 1.9GHz Digital Modulation Wireless Speaker

UserManual.wiki >

VTech Telecommunications >

80 9092 00 User Manual

User Manual

User’s manualTL80133DECT 6.0 portable wireless speaker

Parts checklistCheck to make sure the package includes the following items. Save your sales receipt and original packaging in the event warranty service is necessary.Battery compartment cover Power adapter for speaker chargerUser's manual Wireless speakerBattery for wireless speakerUser’s manual TL80133DECT 6.0 portable wireless speakerSpeaker chargerBattery Pack :2.4V Ni-MHWARNING :DO NOT BURN OR PUNCTURE BATTERIES.THIS SIDE UP

1Quick reference guideGetting startedVOL- VOL+CHARGE lightMUTEFLASH

2Getting startedAvoid placing the telephone base too close to:• Communication devices such as television sets, VCRs or other cordless telephones.• Excessive heat sources.• Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators or fluorescent lighting.• Excessive dust sources such as a workshop or garage.• Excessive moisture.• Extremely low temperature.• Mechanical vibration or shock such as on top of a washing machine or work bench.InstallationSee page 4 for easy instructions.You must install and charge the battery before using the speaker. STOP!For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 2 88-4268.

3Getting startedCharger installationInstall the speaker charger as shown below. Plug the small end of the charger power adapter into the power adapter jack on the back of the charger.Plug the large end of the charger power adapter into a power outlet not controlled by a wall switch.Route the power adapter cord through this slot.IMPORTANT INFORMATION• Use only the power adapter provided with this product. To obtain aUse only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.• The power adapter is intended to be correctly oriented in a vertical orThe power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

4Getting startedBattery installation and chargingInstall the battery as shown below.Battery Pack :2.4V Ni-MHWARNING :DO NOT BURN OR PUNCTURE BATTERIES.THIS SIDE UP Battery Pack :2.4V Ni-MHWARNING :DO NOT BURN OR PUNCTURE BATTERIES.THIS SIDE UP Plug the battery connector securely into the socket inside the speaker battery compartment.1. 2. Insert the supplied batteryInsert the supplied battery with the label THIS SIDE UP facing up as indicated.3. Insert the tab on the bottom of the battery compartment cover into the battery compartment, then press down gently on the cover until it snaps into place.4. Charge the speaker byCharge the speaker by placing it face upward in the charger. The CHARGE light on the speaker turns red during charging.CHARGE light turns redTo replace the battery, push the tab and lift the battery compartment cover up and off. Lift out the old battery and disconnect it from the speaker. Follow the instructions above to install and charge the new battery.Battery Pack :2.4V Ni-MHWARNING :DO NOT BURN OR PUNCTURE BATTERIES.THIS SIDE UP

5Getting startedIMPORTANT INFORMATION• Use only the supplied rechargeable battery or replacement batteryUse only the supplied rechargeable battery or replacement battery (model BT185742/BT285742). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.• If you do not use the speaker for a long time, disconnect and removeIf you do not use the speaker for a long time, disconnect and remove the battery to prevent possible leakage.Battery installation and chargingOnce you have installed the battery, the CHARGE light on the speaker indicates the battery status (see the table below). If necessary, place the speaker in the charger to charge the battery. For optimal performance, keep the speaker in the charger when not in use. The battery is fully charged after 11 hours of continuous charging. See Technical specifications on page 20 for battery operating times.notes:If you are on a call in low battery mode, you hear a low battery alert tone every 60 seconds.If the battery is not properly installed or no battery is installed in the speaker, when you place it in the charger, the CHARGE light is off. Follow the instructions on page 4 to install the battery.••CHARGE light Battery statusRed: Flashes every 10 seconds. Battery has very little charge and needs charging.Red: Steadily on. Battery is charging.Green: Steadily on. Battery is fully charged (in the charger).

6AppendixImportant safety informationThis symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire or electric shock.Safety informationRead and understand all instructions in the user’s manual. Observe all markings on the product.Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.Do not use a telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet or when the speaker is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged speaker into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquids, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly.Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion.•••••

7AppendixImportant safety informationIf this product does not operate normally, see the Troubleshooting section on pages - in this user’s manual. If you cannot solve the problem, or if the product is damaged, refer to Limited warranty on pages 16-19. Do not open this product except as may be directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks.Replace batteries only as described in Battery installation and charging on pages 4-5 in your user’s manual. Do not burn or puncture batteries — they contain caustic chemicals.This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, an under-the-table or cabinet outlet.CAUTION: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.Especially about wireless speakersPrivacy: The same features that make a wireless speaker convenient create some limitations. Telephone calls are transmitted between the telephone base and the speaker by radio waves, so there is a possibility that your wireless speaker conversations could be intercepted by radio receiving equipment within range of the wireless speaker. For this reason, you should not think of wireless speaker conversations as being as private as those on corded telephones.Electrical power: The telephone base of this wireless speaker must be connected to a working electrical outlet which is not controlled by a wall switch. Calls cannot be made from the speaker if the telephone base is unplugged or switched off, or if the electrical power is interrupted.•••••

Appendix8Important safety informationPotential TV interference: Some wireless speaker operate at frequencies that may cause interference to TVs and VCRs. To minimize or prevent such interference, do not place the telephone base of the wireless speaker near or on top of a TV or VCR. If interference is experienced, moving the wireless speaker farther away from the TV or VCR will often reduce or eliminate the interference. Rechargeable batteries: This product contains nickel-metal hydride rechargeable batteries. Exercise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.The RBRC™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1-800-8-BATTERY for locations accepting spent Ni-MH batteries.•••

Appendix9Important safety informationPrecautions for users of implanted cardiac pacemakersCardiac pacemakers (applies only to digital cordless telephones):Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable cordless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:Pacemaker patientsShould keep cordless telephones at least six inches from the pacemaker.Should NOT place cordless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON.Should use the cordless telephone at the ear opposite the pacemaker.WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using cordless telephones.SAVE THESE INSTRUCTIONS•••

10MaintenanceTaking care of your speakerYour wireless speaker contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment.Place the speaker down gently. Save the original packing materials to protect your speaker if you ever need to ship it.Avoid waterYour speaker can be damaged if it gets wet. Do not use the speaker outdoors in the rain, or handle it with wet hands. Do not install the speaker charger near a sink, bathtub or shower.Electrical stormsElectrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms.Cleaning your speakerYour speaker has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or a mild soap.Do not use excess water or cleaning solvents of any kind.•••••••Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Pull the telephone out by the unplugged cords.Appendix

11AppendixFCC, ACTA and IC regulationsFCC Part 68 and ACTAThis equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual.The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider.This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer.If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty.

12AppendixFCC, ACTA and IC regulationsIf this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned.If this product is equipped with a corded or cordless handset, it is hearing aid compatible.If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:Remain on the line and briefly explain the reason for the call before hanging up.Perform such activities in off-peak hours, such as early morning or late evening.••

13AppendixFCC, ACTA and IC regulationsIndustry CanadaOperation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this device.The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.This product meets the applicable Industry Canada technical specifications.

14AppendixFCC, ACTA and IC regulationsFCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device.••••

15AppendixFCC, ACTA and IC regulationsTo ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B)

17AppendixLimited warrantyHow long is the limited warranty period?The limited warranty period for the PRODUCT extends for ONE (1) YEAR from the date of purchase. If the manufacturer repairs or replaces a materially defective PRODUCT under the terms of this limited warranty, this limited warranty also applies to repaired or replacement PRODUCT for a period of either (a) 90 days from the date the repaired or replacement PRODUCT is shipped to you or (b) the time remaining on the original one-year limited warranty; whichever is longer.What is not covered by this limited warranty?This limited warranty does not cover:PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; orPRODUCT that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of the manufacturer; orPRODUCT to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; orPRODUCT to the extent that the problem is caused by use with non-AT&T accessories; orPRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; orPRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or3.4.••••••

18AppendixLimited warrantyPRODUCT returned without a valid proof of purchase (see item 6 below); orCharges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit.How do you get warranty service?To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268. NOTE: Before calling for service, please review the user’s manual; a check of the PRODUCT's controls and features may save you a service call.Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. Transportation, delivery or handling charges are prepaid. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this limited warranty.What must you return with the PRODUCT to get warranty service?You must:Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and••5.6.a.

19AppendixLimited warrantyInclude a “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; andProvide your name, complete and correct mailing address, and telephone number.Other limitationsThis warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this PRODUCT. The warranty exclusively describes all of the manufacturer’s responsibilities regarding the PRODUCT. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification.State/Provincial Law rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use) are limited to one year from date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall the manufacturer be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the PRODUCT or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this PRODUCT. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Please retain your original sales receipt as proof of purchase.b.c.7.

20AppendixTechnical specificationsRF frequency band 1921.536MHz — 1928.448MHzChannels 5Operating temperature 32°F — 122°F 0°C — 50°CNominal effective range300m (outdoor)Battery pack BT185742/BT285742 2.4V 600mAh Ni-MHCharger voltage (DC adapter output)DC6V @ 400mAOperating times* Talk time: up to five hours Standby: up to seven days*Operating time varies depending on your actual use and the age of battery.DECT 6.0 digital technologyDigital Enhanced Cordless Telecommunications (DECT) 6.0 is a new frequency band that transmits your voice across multiple channels. This technology provides superior quality of voice and sound, high protection against wiretapping and better range than 2.4 GHz and 5.8 GHz phone systems, while not interfering with wireless routers.Operating rangeThis wireless speaker operates within the maximum power allowed by the Federal Communications Commission (FCC). Even so, this speaker and base can communicate over only a certain distance — which can vary with the locations of the base and speaker, the weather, and the construction of your home or office.Simulated full duplex speakerphoneThe simulated full duplex speakerphone on your speaker allows both ends of a call to speak and be heard at the same time. Optimal performance is subject to external factors and individual usage.