VTech Telecommunications 80-9500-00 1.9GHz Digital Modulation Cordless Headset User Manual Headset FCC R1

VTech Telecommunications Ltd 1.9GHz Digital Modulation Cordless Headset Headset FCC R1

User Manual

1 USER MANUAL Headset (DECT Headset phone) Model : OOMA-HDST01
2 IMPORTANT SAFETY INSTRUCTION : When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1) Read and understand all the instructions. 2) Follow all warnings and instructions marked on the product. 3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4) Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). 5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 6) Unplug this product from the wall outlet and refer servicing to Vtech under the following conditions:  When the power supply cord or plug is damaged or frayed.  If the product does not operate normally by following the operating instructions.  If the product has been dropped and the cabinet has been damaged.  If the product exhibits a distinct change in performance. 7) Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 8) Do not use the telephone to report a gas leak in the vicinity of the leak. SAVE THESE INSTRUCTIONS Caution for Rechargeable battery : 1) The Headset is equipped with Li-ion battery. You can replace it by buying the same battery type from the retailer. Do not disassemble the battery pack. 2) The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause interference and/or unit damages. The manufacturer will not be held liable for damage arising from such non-compliance. 3) Do not use third party charging bays. The batteries may be damaged. 4) Do not immerse the unit in water and do not place in fire. 5) Risk of explosion if you replace the battery by an incorrect type. 6) Dispose of the unit with Li-ion battery enclosed according to the instruction. Must be disposed of at the point of sale or at the appropriate collection points provided by the public waste authorities. Package contents The package contains the following items: • 1 Headset unit • 1 Charger pod • 1 AC power adapter • 1 User manual • 6 Ear buds • 2 Ear hooks • 1 Head band • 1 Neck band The maximum range between the base station and the Headset is approximately 300 meters. Depending on the surrounding conditions as well as spatial and structural factors, the range may be reduced. The range indoors is normally less than outdoors.
3 1 INSTALLING YOUR HEADSET WITH A DECT PHONE First to power up your Dect phone used at home. Then power up the Headset. Do the registration procedure with the Dect phone. Pls use only the provided adaptor connected to the charger base. Important : Charging the Headset unit for at least 5 hours before use. Power adaptor information for the Headset : Manufacturer : Tenpao Model : S005IU0600040, Input 100-120V AC 60Hz 150mA, Output 6VDC 400mA Manufacturer : CHOU SEN ELECTRONICS (SZ) CO., LTD. Model : CS2A060040LUF, Input 100-120V AC 60Hz 200mA, Output 6VDC 400mA Battery installed in the unit : Manfacturer : BYD Type : Lithium-ion polymer rechargeable battery Model : BT191665 Capacity : 3.7V, 240 mAh, 0.888 Wh Charger PodCharging pins.
4 Start to know your Headset : 1. Front side : 2. Top side : 1 TALK ON/OFF In idle mode: Press to place a call. During a call: Press to end the call. In idle mode: Press and hold about 4s to power the headset on or off. 2 SLIDER During a call: Slide to Volume + position, increase the earpiece volume. Slide to Volume - position, decrease the earpiece volume. In idle mode : Slide to Volume + position, increase the ringer volume. Slide to Volume - position, decrease the ringer volume. 3 MUTE/FLASH During a call: Press the slider once to mute the microphone. Press once again to unmute. Press and hold the slider for 2 seconds to do a Flash (R) function to answer a second incoming call. Talk On/Off button with LED indicator. Microphone in the bottom 1 2 3
52. Talk On/Off LED Indicator functions : The status LED on the Talk On/Off key can communicate information about the connection and battery status of the device. The table below shows the different LED indicator patterns of the headset uses : Blue light : 1. Steadily on: When the Headset is placed on the charge pod and fully charged. 2. Flashing : in idle mode and not charging. 3 .Double flashing : it is on and connected a phone call. 4. Trible flashing : it is power on. 5. Quadruple flashing : a call is coming, the headset is ringing, you can hear the ringer sound through the earpiece. Red light: 1. Steadily on: it is charging on the charging cradle. 2. Flashing : Battery is low and it needs to place it back to cradle for charging. 3. Triple flashing: it is powering off. Red/Blue light : 1. Toggling slowly : The unit is in registration mode but not registered. 2. Toggling quickly : it is in registration mode and trying to register to the base. Off : Headset is power off or no battery is installed or the battery is dead Registration to a base unit : The headset is un-registered when taking out from the box. Power up the headset by placing it on the charger pod which is connected to the charger adaptor and power on. The power indicator is flashing with blue and red color alternatively. Then start the registration mode of the base unit. For the Ooma base unit, press and hold the page key of the Ooma for 3 seconds to start registration mode. Wait until a succeed tone is heard. The power indicator on the headset will be stable and in red color. Note: To register the headset unit, the system PIN of the Dect phone base should be 0000. Or else, the registration will be failed. Remark : 1. It will hear the voice message from the headset in below 3 events :  Battery low  Out of range  Not Registered 2. Place the unit on the charger bay after use it to make sure the battery power is full. 3. If the unit is not working, try to take out the battery pack and wait for 30s before placing it back. 4. If the call is finished, press the Talk On/Off key once to release the line (Oh hook). 5. Charging the unit for at least 5 hours before use. The power indicator is in blue color and stable on.
6 5. Technical Specifications : RF frequency band 1921.536MHz – 1928.448MHz Channels 5 Operating temperature 32 deg F – 113 deg F 0 deg C – 45 deg C Nominal effective range 300m outdoor DC adaptor output DC 6V @ 400mA Operating times* Talk time : up to nine hours Standby : up to four days *Operating time varies depending on your actual use and the age of battery.
7 Li-ion battery warning :
8 This Class B digital apparatus complies with Canadian requirement : CAN ICES-3 (B)/NMB-3(B).
9 Privacy of communications may not be ensured when using this device. Service Centre phone number and web site. In USA : 1 (888) 711 6662 Web site : www.ooma.com/support In Canada : 1 (866) 929 6662

Navigation menu