VTech Telecommunications 80-9968-00 2.4GHz Baby Monitor-Baby Unit User Manual

VTech Telecommunications Ltd 2.4GHz Baby Monitor-Baby Unit

User Manual

Download: VTech Telecommunications 80-9968-00 2.4GHz Baby Monitor-Baby Unit User Manual
Mirror Download [FCC.gov]VTech Telecommunications 80-9968-00 2.4GHz Baby Monitor-Baby Unit User Manual
Document ID2596795
Application IDG28stNe41M63tyne0bvboQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize190.31kB (2378878 bits)
Date Submitted2015-04-26 00:00:00
Date Available2015-04-26 00:00:00
Creation Date2015-04-14 16:55:40
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2015-04-14 16:55:46
Document TitleUser Manual
Document CreatorAdobe InDesign CS2 (4.0)

What’s in the box
10
Overview
User’s manual
VM304
Accessory baby unit
for use with VTech model
VM341
Connect the baby unit
Congratulations
on purchasing your new VTech product. Before
using this product, please read Important
safety instructions.
This manual has instructions on how to set
up and pair your new baby unit. For complete
instructions on using the baby unit, see the
user’s manual that comes with your video and
audio monitor.
For support, shopping, and everything new at
VTech, visit our website at
www.vtechphones.com.
Register online to get an additional
3-month warranty!
Visit www.vtechphones.com.
Registration
Register your product online for
enhanced warranty support.
Product news
Learn about the latest VTech
products.
•
•
•
•
Use only the power adapter supplied with this
product.
Make sure the electrical outlet is not controlled by
wall switch.
The power adapter is intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if
they are plugged into a ceiling, under-the-table or
cabinet outlet.
Make sure the baby unit and the power adapter
cord are out of reach of children.
Temperature sensor
12
Speaker
13
Threaded socket
• For wall mount installation use.
14
PAIR
• Press and hold to pair to the parent
unit when a desired baby unit slot is
chosen at the parent unit.
Power jack
Before use
Pair extra new baby unit
Each newly purchased baby unit (VM304)
must be paired to your video and audio monitor
system (VM341).
NOTES
11
15
BC
ON/OFF switch
• Slide to turn on or off the baby unit.
Light sensor
Camera
Infrared LEDs
/ Play/Stop
• Press to play or stop lullaby on the
baby unit.
ON/OFF light
Microphone
Skip
• Press to play the next lullaby.
VOL+
• Press to increase the speaker
volume.
VOL• Press to decrease the speaker
volume.
NOTES
• You can pair a maximum of four baby units to your
parent unit. Each new baby unit must be paired to
the parent unit before use.
• Make sure you power on the parent unit before
pairing.
To pair a baby unit:
1. Press MENU when the parent unit is not in
use.
2. Press or to choose PAIR/UNPAIR
CAM, then press SELECT to select.
3. Press or to choose Pair CAM, then
press SELECT to select.
4. Press or to choose an empty baby unit
slot, then press SELECT. The parent unit
screen displays Press and hold the pair
button at the CAM for 5 seconds until the
power indicator flashes..
5. Immediately press and hold PAIR on the
bottom of the baby unit with a narrow
pointed object such as a pencil. The LED
light flashes quickly.
When pairing is successful, the screen displays
the view of newly paired baby unit in
SINGLE-CAM mode. The LED light on the new
baby unit remains on.
NOTES
• If pairing fails, the screen displays Pairing failed.
Try the pairing process again.
• Only one baby unit can be paired at a time.
To unpair a baby unit:
NOTE
Make sure you power on the baby unit and the parent
unit before unpairing the baby unit.
1. On the idle parent unit, press MENU.
2. Press or to choose PAIR/UNPAIR
CAM, then press SELECT to select.
3. Press or to choose Unpair CAM, then
press SELECT to select.
4. Press or to choose a desired baby unit,
then press SELECT.
5. Press on the parent unit when the screen
displays To unpair CAM X, press the
[ZOOM] key at the Parent Unit..
6. Press SELECT when the screen displays
Then, press the [MENU/SELECT] key to
confirm..
7. When unpairing is successful, the screen
displays CAM X is unpaired and returns to
previous menu. If there is no paired baby
unit, the screen displays No CAM is paired..
The LED light on the selected baby unit
flashes slowly.
Positioning the baby monitor
NOTE
This baby monitor is intended as an aid. It is not a
substitute for proper adult supervision, and should not
be used as such.
CAUTION
Keep the baby unit out of the reach of the baby. Never
place or mount the baby unit inside the baby’s crib or
playpen.
1. Place the baby unit at least 1 meter / 3 feet
away from your baby. Adjust the angle of the
camera to aim at your baby.
At least 1 meter
(3 feet)
2. Place parent unit at least 1 meter / 3 feet
away from the baby unit.
At least 1 meter
(3 feet)
NOTE
If you experience audio feedback on either the parent
unit or baby unit, move the parent unit further away
until there is no more audio feedback; or press -/VOL
on the parent unit to lower the audio feedback sound.
7.
TIP
For desktop usage and/or wall mounting the baby
unit, you can refer to Quick Start Guide.
8.
Operating range
9.
The operating range of the baby monitor is up to
300 meters (1,000 feet) outdoors or 50 meters
(160 feet) indoors. The actual operating range
may vary depending on the environmental
conditions and other interferences such as
walls, doors and other obstructions.
General product care
To keep this product working well and looking good,
follow these guidelines:
• Avoid putting it near heating appliances and devices
that generate electrical noise (for example, motors
or fluorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft cloth.
• DO NOT immerse the baby unit in water and do not
clean them under the tap.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the baby unit is dry before you connect
them to the mains again.
10.
11.
12.
13.
14.
15.
16.
Important safety instructions
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and injury, including the following:
1. Follow all warnings and instructions marked on
the product.
2. Adult setup is required.
3. This product is intended as an aid. It is not
a substitute for responsible and proper adult
supervision and should not be used as such.
4. This product is not intended for use as a medical
monitor.
5. Do not use this product near water. For example,
do not use it next to a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in a
wet basement or shower.
6. Use only the adapters included with this product.
Incorrect adapter polarity or voltage can seriously
damage the product.
LPS or Class 2 Baby unit power adapter:
Input 100-240V AC 50/60 Hz; output: 6V DC 1A
17.
18.
19.
20.
21.
For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be
easily accessible.
The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
if it is plugged into a ceiling, under-the-table or
cabinet outlet.
Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Do not cut off the power adapters to replace them with
other plugs, as this causes a hazardous situation.
Do not allow anything to rest on the power cords.
Do not install this product where the cords may be
walked on or crimped.
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply in your home, consult your dealer or local
power company.
Do not overload wall outlets or use an extension
cord.
Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
This product should not be placed in any area
where proper ventilation is not provided. Slots and
openings in the back or bottom of this product
are provided for ventilation. To protect them from
overheating, these openings must not be blocked
by placing the product on a soft surface such as
a bed, sofa or rug. This product should never be
placed near or over a radiator or heat register.
Never push objects of any kind into this product
through the slots because they may touch
dangerous voltage points or create a short circuit.
Never spill liquid of any kind on the product.
To reduce the risk of electric shock, do not
disassemble this product, but take it to an
authorized service facility. Opening or removing
parts of the product other than specified access
doors may expose you to dangerous voltages or
other risks. Incorrect reassembling can cause electric
shock when the product is subsequently used.
You should test the sound reception every
time you turn on the units or move one of the
components.
Periodically examine all components for damage.
Be aware of possible loss of privacy while using
public airwaves. Conversations may be picked
up by other nursery monitors, cordless phones,
scanners, etc.
Children should be supervised to ensure that they
do not play with the product.
The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature
between 32oF and 104oF.
2. Do not expose the product to extreme cold,
heat or direct sunlight. Do not put the product
close to a heating source.
3. Make sure the baby unit(s) and the adapter
cord(s) are always out of reach of the baby,
at least 3 feet away from the baby or crib, to
avoid a possible strangulation hazard.
4. Never place the baby unit(s) inside the baby’s
crib or playpen. Never cover the baby unit(s)
with anything such as a towel or a blanket.
5. Other electronic products may cause
interference with your baby monitor. Try
installing your baby monitor as far away from
these electronic devices as possible: wireless
routers, radios, cellular telephones, intercoms,
room monitors, televisions, personal
computers, kitchen appliances and cordless
telephones.
Precautions for users of implanted cardiac
pacemakers
Cardiac pacemakers (applies only to digital cordless
devices):
Wireless Technology Research, LLC (WTR), an
independent research entity, led a multidisciplinary
evaluation of the interference between portable
wireless devices and implanted cardiac pacemakers.
Supported by the U.S. Food and Drug Administration,
WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches
from the pacemaker.
• Should NOT place wireless devices directly over
the pacemaker, such as in a breast pocket, when it
is turned ON.
WTR’s evaluation did not identify any risk to
bystanders with pacemakers from other persons
using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user’s manual, the product is safe to be used based
on scientific evidence available today.
The RBRC® seal
The RBRC® seal on the lithium-ion battery indicates
that VTech Communications, Inc. is voluntarily
participating in an industry program to collect and
recycle these batteries at the end of their useful lives,
when taken out of service within the United States
and Canada.
The RBRC® program provides a convenient
alternative to placing used lithium-ion batteries into
the trash or municipal waste, which may be illegal in
your area.
VTech’s participation in RBRC® makes it easy for
you to drop off the spent battery at local retailers
participating in the RBRC® program or at authorized
VTech product service centers. Please call
1 (800) 8 BATTERY® for information on Li-ion battery
recycling and disposal bans/restrictions in your
area. VTech’s involvement in this program is part of
its commitment to protecting our environment and
conserving natural resources.
RBRC® and 1 (800) 8 BATTERY® are registered
trademarks of the Rechargeable Battery Recycling
Corporation.
FCC and IC regulations
FCC Part 15
This equipment has been tested and found to comply
with the requirements for a Class B digital device
under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are
intended to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications to this equipment not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
To ensure safety of users, the FCC has established
criteria for the amount of radio frequency energy
that can be safely absorbed by a user or bystander
according to the intended usage of the product. This
product has been tested and found to comply with the
FCC criteria. The baby unit shall be installed and used
such that parts of all persons’ body are maintained at
a distance of approximately 8 in (20 cm) or more.
This Class B digital apparatus complies with Canadian
requirement:
CAN ICES-3 (B)/NMB-3(B)
Industry Canada
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation.
Privacy of communications may not be ensured when
using this product.
The term ‘’IC:‘’ before the certification/registration
number only signifies that the Industry Canada
technical specifications were met.
This product meets the applicable Industry Canada
technical specifications.
RF radiation exposure statement
The baby unit complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. The baby unit should be installed and
operated with a minimum distance of 8 in (20 cm)
between the baby unit and all persons’ body. Use of
other accessories may not ensure compliance with
FCC RF exposure guidelines. This transmitter must
not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment complies
also with Industry Canada RSS-102 with respect to
Canada’s Health Code 6 for Exposure of Humans to
RF Fields.
For cETL compliance only
Mesures de sécurité importantes
Lorsque vous utilisez votre appareil, vous devriez
toujours suivre certaines mesures de précaution
de base afin de réduire les risques d’incendie,
d’électrocution et de blessures corporelles, dont
ceux qui suivent :
1. Observez toutes les instructions et mises en garde
inscrites sur l’appareil.
2. L’installation par un adulte est requise.
3. Ce produit a été conçu pour être un dispositif
d’appoint seulement. Il n’est pas le remplacement
d’une supervision responsable et adéquate par un
adulte et ne devrait pas être utilisé comme telle.
4. Ce produit n’est pas conçu pour être utilisé en tant
que moniteur médical.
5. N’utilisez pas cet appareil près de l’eau ni de toute
autre source d’humidité, par exemple, près d’une
baignoire, cuve à lessive, évier de cuisine, dans
un sous-sol humide ni près d’une piscine, dans un
soussol humide ou une douche.
6. N’utilisez que les adaptateurs inclus avec ce
produit. L’utilisation d’un adaptateur dont la
polarité ou la tension serait inadéquate risque
d’endommager sérieusement le produit et mettre
votre sécurité en péril.
LPS ou Classe 2 Adaptateur de l’unité du bébé :
Entrée 100-240V CA 50/60 Hz; Sortie : 6 V CC 1A
Pour les PRODUITS À BRANCHER À UNE
PRISE DE COURANT, la prise de courant doit
être installée près du produit, afin d’assurer une
accessibilité sécuritaire à la prise de courant.
7. Lorsqu’ils sont branchés dans une prise de
courant, les adaptateurs secteur ont été conçus
pour être orientés correctement, soit à la verticale
ou au plancher. Les broches n’ont pas été conçues
pour supporter le poids du bloc d’alimentation et
le maintenir en place si celuici est branché dans
une prise au plafond, sous une table ou dans un
meuble.
8. Débranchez ce produit de la prise de courant
avant de procéder au nettoyage. N’utilisez pas de
nettoyants en aérosols. Utilisez un chiffon humide
pour le nettoyer.
9. Ne coupez pas les cordons d’alimentation pour
remplacer les fiches, car ceci peut présenter un
danger potentiel.
10. Ne laissez aucun objet reposer ni appuyer sur le
cordon d’alimentation. N’installez pas cet appareil
dans un endroit où l’on risque d’écraser le cordon
d’alimentation ou de le piétiner.
11. Ne faites fonctionner cet appareil qu’avec le type
d’alimentation indiqué sur l’étiquette. Si vous
ne connaissez pas le type d’alimentation que
vous possédez à votre domicile, consultez votre
marchand ou votre compagnie locale d’électricité.
12. Ne surchargez pas les prises de courant murales
ni les rallonges électriques.
13. Ne placez pas cet appareil sur un chariot,
meuble, trépied, support de montage ni table
chancelants.
14. Les trous et ouvertures du boîtier, situés à
l’arrière de l’appareil ou sous celui-ci, servent à
aérer l’appareil. Pour l’empêcher de surchauffer,
ne bloquez sous aucun prétexte ces ouvertures et
n’empêchez pas l’aération adéquate de l’appareil
en le plaçant sur un lit, divan, tapis ou toute autre
surface similaire. De même, ne le positionnez
pas à proximité ni au-dessus d’une source de
chaleur ou d’un calorifère. De plus, ne placez pas
l’appareil dans un endroit avant de vous assurer
qu’il y ait une bonne circulation d’air.
15. N’enfoncez jamais d’objets à travers les
ouvertures de cet appareil, car ils pourraient
entrer en contact avec des points de tension
dangereux ou causer des courts-circuits qui
peuvent dégénérer en incendies ou en risques
d’électrocution. Ne renversez jamais de liquide
dans ce produit.
16. Afin de réduire les risques d’électrocution, ne
démontez pas cet appareil, mais apportez-le dans
un centre de service autorisé. L’ouverture du
boîtier ou le retrait de toutes pièces que contient
cet appareil, à l’exception de l’accès autorisé à
certaines portes ou ouvertures, risque de vous
exposer à des points de tension dangereux ou
d’autres dangers. Un remontage incorrect peut
par la suite présenter des risques d’électrocution.
17. Vous devriez tester la réception chaque fois que
vous mettez l’appareil en fonction.
18. Examinez les composantes afin de vérifier si
celles-ci ne sont pas endommagées.
19. Soyez avisé de la perte de la confidentialité
lorsque vous utilisez les ondes publiques. Les
conversations peuvent être entendues par
d’autres moniteurs de bébé, des téléphones sans
fil, des scanneurs, etc.
20. Les enfants devraient être supervisés afin de
vous assurer qu’ils ne jouent pas avec l’appareil.
21. Le produit n’est pas conçu pour être utilisé
par des personnes (incluant des enfants) aux
capacités physiques, sensorielles ou mentales
réduites ou qui manquent d’expérience et de
connaissances, à moins qu’on leur ait donné
suffisamment de supervision ou d’instructions
relativement à l’utilisation de l’appareil par une
personne responsable de leur sécurité.
Mises en garde
1. Utilisez et entreposez le produit à une
température entre 0˚ C (32˚F) et 40˚C (104˚ F).
2. N’exposez pas cet appareil à des froids ou des
chaleurs extrêmes, ainsi qu’à la lumière directe
du soleil. Ne l’installez pas près d’une source de
chauffage.
3. Assurez-vous que le moniteur et le cordon
de l’adaptateur sont toujours hors de portée
des enfants, à au moins 1 mètre (3 pieds) de
l’enfant ou du berceau, pour éviter tout risque de
strangulation.
4. Ne jamais placer le moniteur à l’intérieur du
berceau ou du parc de bébé. Ne jamais couvrir le
moniteur ou l’unité (s) portative avec un article tel
une serviette ou une couverture.
5. D’autres équipements électroniques peuvent
produire des interférences sur votre moniteur
vidéo et audio. Tentez d’installer votre moniteur
vidéo ou audio à l’écart des appareils
électroniques tels que des routeurs sans fil,
radios, téléphones cellulaires, interphones,
moniteurs, téléphones, ordinateurs personnels,
électroménagers et téléphones sans fil.
CONSERVEZ CES INSTRUCTIONS
Ce produit de VTech est conforme à toutes les normes
se rapportant aux champs électromagnétiques (EMF)
standard. Si vous le manipulez correctement en
suivant les instructions de ce guide, son utilisation
sera sécuritaire pendant de nombreuses années,
selon les meilleures évidences scientifiques dont nous
disposons aujourd’hui.
Stimulateurs cardiaques implantés dans
l’organisme
Les simulateurs cardiaques (ne s’applique qu’aux
dispositifs numériques sans fil) :
L’organisme ‘Wireless Technology Research, LLC
(WTR)’, une firme de recherche indépendante,
a mené une évaluation pluridisciplinaire des
interférences entre les téléphones sans fil portatifs
et les stimulateurs cardiaques implantés dans
l’organisme. Appuyée par l’Administration des
aliments et drogues (FDA) des États-Unis, la firme
WTR recommande aux médecins:
Avis aux détenteurs de stimulateurs cardiaques
• Vous devriez maintenir les dispositifs sans fil à au
moins six pouces du simulateur cardiaque.
• Ils ne doivent PAS placer le téléphone sans fil
directement sur le stimulateur cardiaque, tel que
dans une poche de chemise, lorsque celui-ci est
en marche.
L’étude effectuée par l’organisme WRS n’a pas
identifié de risque pour les détenteurs de simulateurs
cardiaques causés par les gens qui utilisent dispositifs
sans fil à proximité de ceux-ci.
Champs électromagnétiques (EMF)
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to
the holder of a valid proof of purchase (“Consumer”
or “you”) that the Product and all accessories
provided in the sales package (“Product”) are
free from defects in material and workmanship,
pursuant to the following terms and conditions,
when installed and used normally and in accordance
with the Product operating instructions. This limited
warranty extends only to the Consumer for Products
purchased and used in the United States of America
and Canada.
What will VTech do if the Product is not free from
defects in materials and workmanship during
the limited warranty period (“Materially Defective
Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair or replace
at VTech’s option, without charge, a Materially
Defective Product. If we repair the Product, we may
use new or refurbished replacement parts. If we
choose to replace the Product, we may replace it with
a new or refurbished Product of the same or similar
design. We will retain defective parts, modules, or
equipment. Repair or replacement of the Product, at
VTech’s option, is your exclusive remedy. VTech will
return the repaired or replacement Products to you
in working condition. You should expect the repair or
replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends
for ONE (1) YEAR from the date of purchase. If VTech
repairs or replaces a Materially Defective Product
under the terms of this limited warranty, this limited
warranty also applies to the repaired or replacement
Product for a period of either (a) 90 days from the
date the repaired or replacement Product is shipped
to you or (b) the time remaining on the original oneyear warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or other
liquid intrusion; or
2. Product that has been damaged due to repair,
alteration or modification by anyone other than an
authorized service representative of VTech; or
3. Product to the extent that the problem experienced
is caused by signal conditions, network reliability, or
cable or antenna systems; or
4. Product to the extent that the problem is caused by
use with non-VTech accessories; or
5. Product whose warranty/quality stickers, product
serial number plates or electronic serial numbers
have been removed, altered or rendered illegible; or
6. Product purchased, used, serviced, or shipped for
repair from outside the United States of America
or Canada, or used for commercial or institutional
purposes (including but not limited to Products used
for rental purposes); or
7. Product returned without a valid proof of purchase
(see item 2 on the next page); or
8. Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA, please visit
our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
NOTE: Before calling for service, please review the
user’s manual - a check of the Product’s controls and
features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery or
handling charges incurred in the transport of the
Product(s) to the service location. VTech will return
repaired or replaced Product under this limited
warranty. Transportation, delivery or handling charges
are prepaid. VTech assumes no risk for damage or
loss of the Product in transit. If the Product failure
is not covered by this limited warranty, or proof of
purchase does not meet the terms of this limited
warranty, VTech will notify you and will request that
you authorize the cost of repair prior to any further
repair activity. You must pay for the cost of repair and
return shipping costs for the repair of Products that
are not covered by this limited warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and contents
including the Product to the VTech service location
along with a description of the malfunction or
difficulty; and
2. Include a “valid proof of purchase” (sales receipt)
identifying the Product purchased (Product model)
and the date of purchase or receipt; and
3. Provide your name, complete and correct mailing
address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement
between you and VTech. It supersedes all other
written or oral communications related to this Product.
VTech provides no other warranties for this Product.
The warranty exclusively describes all of VTech’s
responsibilities regarding the Product. There are no
other express warranties. No one is authorized to make
modifications to this limited warranty and you should not
rely on any such modification.
State/Provincial Law Rights: This warranty gives you
specific legal rights, and you may also have other
rights, which vary from state to state or province to
province.
Limitations: Implied warranties, including those of
fitness for a particular purpose and merchantability (an
unwritten warranty that the Product is fit for ordinary
use) are limited to one year from the date of purchase.
Some states/provinces do not allow limitations on how
long an implied warranty lasts, so the above limitation
may not apply to you. In no event shall VTech be liable
for any indirect, special, incidental, consequential,
or similar damages (including, but not limited to lost
profits or revenue, inability to use the Product or other
associated equipment, the cost of substitute equipment,
and claims by third parties) resulting from the use of
this Product. Some states/provinces do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not
apply to you.
Please retain your original sales receipt as proof of
purchase.
Technical specifications
Frequency
control
Crystal controlled PLL synthesizer
Transmit
frequency
2406 - 2475 MHz
Channels
24
Nominal
Maximum power allowed by FCC
effective range and IC. Actual operating range may
vary according to environmental
conditions at the time of use.
Power
requirements
Input: 100-240V AC 50/60Hz
Output: 6V DC @ 1A
Credits:
The Background Noise sound file was created by Caroline
Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford,
and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig,
and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is
used under the Creative Commons license.
Specifications are subject to change without notice.
© 2015 for VTech Communications, Inc.
All rights reserved. 04/15. VM304_CIB_V1.0
Document order number: 91-008405-010-100

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1.1-111
Instance ID                     : uuid:efbe43c9-cb5f-48aa-afb2-30f5d6dd6037
Document ID                     : adobe:docid:indd:3e7256a5-e283-11e4-aaf2-d93303c378c3
Rendition Class                 : proof:pdf
Derived From Instance ID        : 090630aa-d8d5-11e4-9af5-a163ad3fa815
Derived From Document ID        : adobe:docid:indd:090630a7-d8d5-11e4-9af5-a163ad3fa815
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:61F00EA58BC3E311B346F226B2DAA8B3, xmp.iid:373628885BD3E4118227D9DFB0C3FF8A, xmp.iid:61F00EA58BC3E311B346F226B2DAA8B3, xmp.iid:61F00EA58BC3E311B346F226B2DAA8B3, xmp.iid:5EF00EA58BC3E311B346F226B2DAA8B3, xmp.iid:5EF00EA58BC3E311B346F226B2DAA8B3, xmp.iid:5EF00EA58BC3E311B346F226B2DAA8B3, xmp.iid:C0500FAB17DCE31196FBB13B4990AE09, xmp.iid:F1F80EA4BDAFE1118DD7FDD55A4446BF, xmp.iid:F2F80EA4BDAFE1118DD7FDD55A4446BF, xmp.iid:323628885BD3E4118227D9DFB0C3FF8A, xmp.iid:343628885BD3E4118227D9DFB0C3FF8A, xmp.iid:343628885BD3E4118227D9DFB0C3FF8A, xmp.iid:343628885BD3E4118227D9DFB0C3FF8A, xmp.iid:2F3628885BD3E4118227D9DFB0C3FF8A, xmp.iid:F277E721DBA1E41181A6FCAFDC08472A, xmp.iid:338A22486CD7E411843E9C5F1B5E0247, xmp.iid:DCF95EA3C363E4118A86B96127360FE5, xmp.iid:5DF00EA58BC3E311B346F226B2DAA8B3, xmp.iid:5DCB1C7C3F62E3119840E311387300E2
Manifest Reference Document ID  : xmp.did:61F00EA58BC3E311B346F226B2DAA8B3, xmp.did:373628885BD3E4118227D9DFB0C3FF8A, xmp.did:61F00EA58BC3E311B346F226B2DAA8B3, xmp.did:61F00EA58BC3E311B346F226B2DAA8B3, xmp.did:5EF00EA58BC3E311B346F226B2DAA8B3, xmp.did:5EF00EA58BC3E311B346F226B2DAA8B3, xmp.did:5EF00EA58BC3E311B346F226B2DAA8B3, xmp.did:C0500FAB17DCE31196FBB13B4990AE09, xmp.did:F1F80EA4BDAFE1118DD7FDD55A4446BF, xmp.did:F2F80EA4BDAFE1118DD7FDD55A4446BF, xmp.did:323628885BD3E4118227D9DFB0C3FF8A, xmp.did:343628885BD3E4118227D9DFB0C3FF8A, xmp.did:343628885BD3E4118227D9DFB0C3FF8A, xmp.did:343628885BD3E4118227D9DFB0C3FF8A, xmp.did:2F3628885BD3E4118227D9DFB0C3FF8A, xmp.did:F277E721DBA1E41181A6FCAFDC08472A, xmp.did:1F39E562FCA5E411AD76BA66F6CA09EE, xmp.did:DCF95EA3C363E4118A86B96127360FE5, xmp.did:5DF00EA58BC3E311B346F226B2DAA8B3, xmp.did:5DCB1C7C3F62E3119840E311387300E2
Create Date                     : 2015:04:14 16:55:40+08:00
Modify Date                     : 2015:04:14 16:55:46+08:00
Metadata Date                   : 2015:04:14 16:55:46+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7758 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EW780-9968-00

Navigation menu