VTech Telecommunications 80-S006-00 VoIP Phone User Manual

VTech Telecommunications Ltd VoIP Phone

User Manual

C(2, 3)(2, 3)(1, 2)(2, 3)(2, 3)EHS(1)   If no PoE available - Wenn PoE nicht verfügbar - S'il n'y a pas de PoE - Si no se dispone de PoE - Se non disponibile PoE-(2)   Not included in delivery - Nicht im Lieferumfang enthalten - Non inclus - Non incluido - Non incluso(3)   Optional - Optionnel - Opzionale - OpcionalConnecting · Anschließen · Connecter · Conectar · Collegare  ENGLISHCopyright, Trademarks, Legal Disclaimers©  2018 Snom Technology GmbH.  All Rights Reserved.  Snom, the names of Snom products, and Snom logos are trademarks owned by Snom Technology GmbH.  All product specifications are subject to change without notification.  Snom Technology GmbH reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact. Although due care has been taken in the compilation and presentation of the information in this document, the data upon which it is based may have changed in the meantime.  Snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of Snom or where liability arises due to binding legal provisions.Important InformationPlease read the instructions on safety and disposal and on how to set up and use the device before using it and also give them to other users to read or inform those users of their contents.  Save this manual and do not give the device to third parties without it.Safety Instructions•   Warning:  The product included (ITE) in this manual is to be connected only to PoE networks without routing to the outside plant.•   Follow the instructions in this manual and other applicable documentation of the device.•   If the phone is not supplied with power via the Ethernet cable, use only the power adapter listed in the user instructions.  Other power supplies may damage or destroy the phone, aect its behavior, or induce noise.•   Avoid placing the cables where people may trip over them or where they may be exposed to mechanical pressure as this may damage them.  •   This device is for indoor use only!  NOT FOR OUT-DOOR USE!•   Do not install the device in rooms with high humidi-ty (for example, in bathrooms, laundry rooms, damp basements). Do not immerse the device in water and do not spill or pour liquids of any kind onto or into the device.•   Do not install the device in surroundings at risk for explosions (paint shops, for example). Do not use the device if you smell gas or other potentially explosive fumes.•   Do not use the device during thunderstorms.  Lightning striking the power grid may cause electric shocks.•   Warning:  The handset contains a magnet, and its earpiece may attract small dangerous objects such as needles or pins.  Please ensure before each use that no such objects are present.SELV (Safety Extra Low Voltage) ComplianceSafety status of input/output connections comply with SELV requirements.Warning: To avoid electric shock, do not con-nect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution when connecting cables.Standards conformance  This device complies with the essential health, safety, and environmental require-ments of all relevant European directives.This phone is FCC certified and meets US health, safety, and environmental standards.FCC ID:  EW780-S006-00This product meets the applicable Innovation, Science and Economic Development Canada technical speci-fications.IC ID:  1135B-80S00600CAN ICES-3 (A)/NMB-3(A)Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and may also result in the loss of CE and IC conformity and the FCC certification.  In case of malfunction contact authorized service personnel, your seller, or Snom.•   Safety:  IEC 60950•   Connectors:   ◦2 x RJ45 (Ethernet): 1 x LAN, 1 x PC  ◦2 x 4P4C (handset, optional headset) ◦1 x RJ12 ◦USB port:  1 x type A, USB 2.0•   Ethernet:   2 x IEEE 802.3 / 1 Gigabit Ethernet switch•  Power over Ethernet  (PoE):  IEEE 802.3af, Class 3 If PoE not available:  Power adapter not included in delivery, available separately:    ◦ Snom A6, Phihong model PSM10R-050 - EU:  PN 00004325 -  US:  Snom PN 0000432 ◦EU: Ten Pao, model S018BAM0500200, PN 00004393•   Compatible  with Bluetooth V4.0+EDRDisposal of the device  This device is subject to European Directi-ve 2012/19/EU and may not be disposed of with general household garbage.  If youdo not know where to dispose the device at the end of its lifespan, contact your municipality, local waste management provider, or vendor.For countries outside the European UnionDisposal of electrical and electronic products in coun-tries outside the European Union should be done in line with local regulations. Please contact local authorities for further information.CleaningTo clean the device, use an anti-static cloth. Please avo-id cleaning liquids as they might damage the surface or internal electronics of the device.Setting up and connecting the phone:  See figures B and C.Initializing and registering the phoneNOTE:  You will need the registration information received from your Internet service provider or your network administrator - normally the phone or extension number, the password, and the registrar.After you have set up the phone and connected it to the network, it will begin to initialize.  Normally the initialization is completely automatic, using DHCP.  If your network does not support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server from your Internet service provider or your network administrator and enter them manually when you are asked to do so on the display.Watch the display and, when prompted, select an option by pressing the up   or down   arrow on the navigation key (Fig. D). Save your selection by pressing the OK key  .   1.  Language.  The default is English. 2.   Time zone.  Press the function key underneath   to go to the next time zone, then    to show  all available options within that time zone.  3.  Tone scheme (dial tone) 4.   The display shows the "Welcome" screen.  Press any key to log on.    5.  Enter the account number.  Press   to save.6.  Enter the registrar.  Press   to save.7.  Reboot the phone.8.   Enter the password received from your Internet service provider or administrator.  Press   to save.  After successful registration you will see the idle screen. For further information, please refer to the Quick Start Guide and the manual on our web page  www.snom.com.NOTE:  To view the phone's IP address at this state, press  .Snom Technology GmbHWittestr. 30 G13509 Berlin, Deutschlandoce.de@snom.comSnom, Inc.2603 Camino Ramon, Suite 420San Ramon, CA  94583, USAoce.us@snom.comSnom Technology GmbHThe CourtyardHigh StreetAscot, Berkshire SL5 7HP, UKoce.uk@snom.comSnomTechnology GmbH6 Parc des fontenelles78870 Bailly, Franceoce.fr@snom.comSnom Technology GmbHVia Milano 120020 Lainate, Italiaoce.it@snom.com      Snom Technology Ltd.Rm. 828, 5F, No. 285, Sec. 4Zhongxiao E. Rd., Da'an Dist.Taipei City 10692, Taiwanoce.tw@snom.com  DEUTSCHCopyright, Markenrechte, Haftungsausschluss© 2018 Snom Technology Aktiengesellschaft. Alle Rechte reserviert.Snom sowie die Namen der snom-Produkte und die Snom-Logos sind gesetzlich geschützte Marken der Snom Technology GmbH.Produktspezifikationen können ohne Vorankündigung geändert werden. Snom Technology GmbH behält sich jederzeit das Recht auf Überarbeitung und Änderung dieses Dokumentes vor, ohne verpflichtet zu sein, die vorgenommenen Änderungen anzukündigen oder mitzuteilen.Trotz der angewandten Sorgfalt bei der Zusammen-stellung und Präsentation der Informationen in diesem Dokument können sich Daten zwischenzeitlich geän-dert haben.  Daher übernimmt Snom keine Gewähr für die Richtigkeit, Vollständigkeit oder Aktualität der zur Verfügung gestellten Informationen. Jegliche Haftung für Schäden ist ausgeschlossen, sofern diese nicht auf Vorsatz oder grober Fahrlässigkeit auf seiten von Snom beruhen oder sofern keine Haftung aufgrund zwingender gesetzlicher Bestimmungen eintritt. Wichtige HinweiseLesen Sie bitte vor Inbetriebnahme die Sicherheits-hinweise und die Bedienungsanleitung. Lassen Sie sie auch von den Mitbenutzern des Gerätes lesen oder in-formieren Sie sie über deren Inhalt. Bewahren Sie die-ses Dokument auf und geben Sie das Telefon nur mit ihm an Dritte weiter.SicherheitBefolgen Sie die Anweisungen in dieser Bedienungsan-leitung und in der sonstigen Dokumentation des Geräts.•    Falls die Stromversorgung nicht über ein Ether-netkabel erfolgt, verwenden Sie nur ein von Snom ausdrücklich empfohlenes Netzteil. Die Verwendung anderer Netzteile könnte das Telefon beschädigen oder gar zerstören.•   Verlegen Sie die Netz- und Stromkabel so, dass sie durch mechanischen Druck nicht beschädigt werden und Personen nicht darüber stolpern könnten.  •   Dieses Gerät ist nur für den Gebrauch in Innenräu-men bestimmt - NICHT FÜR DEN AUSSENBEREICH!•   Stellen Sie das Gerät nicht in Räumen mit hoher Luftfeuchtigkeit wie Badezimmern, Waschküchen, feuchten Kellerräumen auf. Tauchen Sie das Gerät nicht in Wasser und gießen Sie keine Flüssigkeiten auf oder in das Gerät.•   Stellen Sie das Gerät nicht in explosionsgefährdeten Umgebungen (z.B. Lackiereien) auf. Benutzen Sie das Gerät nicht, wenn Sie Gas oder andere mögli-cherweise explosionsgefährliche Dämpfe riechen.•   Telefonieren Sie nicht während eines Gewitters (Stromschlaggefahr bei Blitzeinschlag ins Netz).•   Warnung: Der Hörer enthält einen Magneten und kann kleine gefährliche Objekte wie Nadeln anzie-hen. Bevor Sie ihn ans Ohr halten, vergewissern Sie sich, dass keine Objekte daran haften.SELV (Safety Extra Low Voltage) EinhaltungDie Eingangs-/Ausgangsverbindungen halten die SELV-Richtlinien für Kleinspannungsgeräte ein.Warnung: Um elektrische Schläge zu vermeiden, verbinden Sie keine SELV-Geräte mit Geräten, die Fernsprech-Netzspannung (TNV) führen. Nur an LAN-Ports anschließen! LAN-Ports enthalten SELV-Stromkreise, Festnetz-Anschlüsse dagegen TNV-Stromkreise. Vorsicht beim Anschließen, da beide Steckverbindungen RJ-45 (8P8C) verwenden könnten.Normkonformität  Dieses Gerät entspricht den grundlegenden Gesundheits-, Sicherheits- und Umweltan-forderungen aller relevanten europäischen Richtlinien. Die eigenmächtige Önung des Geräts sowie Ände-rungen und Modifizierungen am Gerät führen zum Er-löschen der Herstellergarantie und können darüberhi-naus zum Erlöschen der Zulassungen führen. •   Sicherheit: IEC 60950•   Anschlüsse:  ◦2 x RJ45 (Ethernet): 1 x LAN, 1 x PC  ◦2 x 4P4C (Hörer, optionales schnurgeb. Headset) ◦1 x RJ12 ◦USB-Port: 1x Typ A, USB 2.0•   Ethernet:  2 x IEEE 802.3 / 1 Gigabit Ethernet-Switch•  Power over Ethernet (PoE):  IEEE 802.3af, Klasse 3 Wenn PoE nicht verfügbar: Netzteil A6, Phihong Model PSM10R-050. Nicht im Lieferumfang enthal-ten, separat erhältlich: ◦ Snom A6, Phihong Modell PSM10R-050, Art.-Nr. 00004325; oder ◦Ten Pao, Modell S018BAM0500200, Art.-Nr. 00004393•  Kompatibel mit Bluetooth V4.0+EDREntsorgung des Produkts  Dieses Gerät unterliegt der europäischen Richtlinie 2012/19/EU und darf nicht im Hausmüll entsorgt werden. Wenn Sie nicht wissen, wo Sie Ihr Altgerät entsorgen kön-nen, wenden Sie sich bitte an Ihre Kom-mune, Ihren örtlichen Müllentsorger oder Ihren Fachhändler.ReinigungBenutzen Sie ein antistatisches Tuch.  Benutzen Sie kein Wasser und keine Reinigungsflüssigkeiten, da sie die Oberfläche und die Elektronik des Gerätes beschä-digen könnten.Aufstellen und Anschließen des TelefonsSiehe Abb. B und C. Initialisierung und Registrierung des TelefonsBeachten Sie bitte:  Sie benötigen die von Ihrem Netzwerkadministrator oder Ihrem VoIP-Provider erhaltenen Zugangsdaten für die Registrierung und Nutzung Ihres Accounts (Kontos), normalerweise Telefonnummer, Registrar und Passwort.  Sobald Sie das Telefon an das Netzwerk angeschlos-sen haben, beginnt es mit der Initialisierung und Re-gistrierung. Die Initialisierung erfolgt normalerweise automatisch über DHCP. Falls Ihr Netzwork DHCP nicht unterstützt, können Sie die IP-Addresse, den IP-Gateway und den DNS Server, die Sie ebenfalls von Ihrem Netzwerkadministrator oder VoIP-Provider erhalten, manuell eingeben, wenn Sie auf dem Display dazu aufgefordert werden. Treen Sie bei Auorderung auf dem Display Ihre Aus-wahl durch Drücken des Aufwärts- oder Abwärtspfeils  () auf der Navigationstaste (Abb. D). Speichern Sie Ihre Auswahl durch Drücken der OK-Taste  .1.   Sprache. Die Voreinstellung ab Werk ist Englisch.2.  Zeitzone 3.  Rufton 4.   Auf dem nächsten Bildschirm werden Sie aufge-fordert, eine beliebige Taste zu drücken, um die Registrierung des Telefons vorzunehmen.          Hinweis: Um jetzt die IP-Adresse des Telefons anzuzeigen, drücken Sie auf  .  5.   Geben Sie die Account-/Nebenstellennummer ein und bestätigen Sie die Eingabe mit  . 6.   Geben Sie den Registrar ein und bestätigen Sie die Eingabe mit  . 7.  Starten Sie das Telefon neu.8.   Geben Sie das Passwort ein, das Sie von Ihrem Internet Provider oder Ihrem Netzwerkadministra-tor erhalten haben, und drücken Sie auf   .  Bei erfolgreicher Registrierung sehen Sie den Ruhebildschirm (Abb. E).  Weitere Information finden Sie im Quick Start Guide und in der Bedienungsanleitung auf unserer Webseite, http://www.snom.com.v2018001DNavigationOK                     CancelVoIP phone Quick Installation Guide D785 BAttaching the Footstand · Fuß montieren · Attacher le pied · Montaje el soporte · Fissare il supporto 1 32AGNU General Public License Quick Installation GuideD785Delivery content · Lieferumfang · Contenu de la boîte · En la caja · Contenuto della confezione
FRANÇAISCopyright, Marques Déposées, Non Respon-sabilitée© 2018 Snom Technology GmbH. Tous droits réservés. Snom, les noms des produits et les logos Snom sont des marques déposées par Snom Technology GmbH.Toutes les spécifications du produit sont sujet à modi-fications sans préavis. Snom Technology GmbH se ré-serve le droit de modifier et de changer ce document à n‘importe quel moment, sans devoir annoncer de tel-les modifications ou changements avant ou après leur mise en place. Bien que le plus grand soin ait été apporté à la compi-lation et à la présentation des informations contenues dans  ce  document,  les  données  sur  lesquelles    elles sont basées peuvent entre-temps avoir été modifiées. Snom  doit  donc  décliner  toute  garantie  et  toute  res-ponsabilité quand à l‘exactitude et à l‘exhaustivité des informations  publiées  excepté  en  cas  de  négligence flagrante de la part de Snom ainsi que des les cas ou la responsabilité de Snom est engagée de par la loi. Informations importantesVeuillez  lire  les  informations  concernant  la  sécu-rité  et  la  mise  au  rebut  de  l‘appareil ainsi  que  celles concernant  son  installation  et  son  utilisation  avant d‘utiliser  buanmderl‘appareil.  Communiquez  égale-ment ces informations aux autres utilisateurs. Gardez ce manuel et ne cédez pas l‘appareil à une tierce partie sans le manuel. Sécurité Suivez  les  instructions  présentes  dans  ce  manuel  et dans les autres documents concernant l‘appareil.•    Evitez de placer les câbles de l’appareil dans un en-droit ou il est possible de trébucher dessus. Evitez également  de  les  placer  là  ou  ils  pourraient  être exposé à  un  écrasement car  ils pourraient en  être endommagé. Si les câbles ou la fiche sont  endom-magés,  débranchez  l’appareil et  contactez  du  per-sonnel d’entretien qualifié.  •   Cet appareil est destiné à une utilisation en intérieur uniquement!  Ne l’installez pas au dehors!•   N’installez  pas  l’appareil  dans  des  pièces  très hu-mides  (par  exemple, dans  une  salle  de  bain  ou  un sous-sol  humide).  N’immergez  pas  l’appareil  dans l’eau et ne versez pas de liquides d’aucune sorte sur ou dans l’appareil.•   N’installez pas l’appareil dans un lieu présentant un risque d’explosion (un magasin de peinture par ex-emple). N’utilisez pas l’appareil si vous  sentez une odeur  de  gaz  ou  d’autres  émanations  potentielle-ment explosives.•   N’utilisez  pas  l’appareil  durant  les  orages,  le  choc d’un  éclair  sur  les  circuits  électriques  peut  provo-quer une électrocution.•   Avertissement: Le combiné contient un aimant, et son écouteur pourrait attirer de petits objets dangereux tels que des aiguilles ou des épingles. Assurez-vous avant chaque utilisation que de tels objets ne sont présents.Conforme à SELV (TBTS - Très Basse Tension de Sécurité)Le niveau de sécurité des connexions d‘entré/sortie est conforme aux recommandations SELV /TBTS.Avertissement: Pour éviter des électrocutions, ne connectez pas les circuits de TBTS à des circuits de tension de réseau téléphonique (TNV). Ne connectez le câble NET/Ethernet qu‘à des ports du réseau local (LAN) qui contiennent des circuits SELV.  Les ports du Réseau Téléphonique Commuté Public (RTCP ou PSTN) sont munis de circuits TNV. Conformité au standards  Cet appareil est marqué CE et conforme aux standards de sécurité, de santé et environne-mentaux de tous les directives européennes applicables.This phone is FCC certified and meets US health, safety, and environmental standards.Canada:  Avis ISDE SC-03 Partie V  Le présent produit est conforme aux spécifications techniques applicables d‘Innovation, Sciences et Déve-loppement Économique Canada.IC ID:  1135B-80S00600La déclaration de conformité peut être demandée de Snom (adresse au verso).L'ouverture et la modification de l'appareil sans auto-risation annule la garantie et peut également annuler la conformité CE et IC et la certification FCC. En cas de mauvais fonctionnement, veuillez contacter le person-nel d'entretien agrée, votre revendeur ou bien snom.•  Sécurité:  IEC 60950•   Connecteurs: ම2 x RJ45 (Ethernet): 1 x LAN, 1 x PC  ම2 x 4P4C (combiné, casque filaire (pas inclus)) ම1 x RJ12 මUSB: 1x type A, USB 2.0•   Ethernet:  2 x IEEE 802.3 / 1 Gigabit Ethernet switch•   Power over Ethernet (PoE):  IEEE 802.3af, Classe 3•   S'il n*ya pas de PoE: Bloc d'alimentation pas inclu dans la boîte, vendu séparément: ම Snom A6, Phihong model PSM10R-050 - EU:  PN 00004325 -  US:  Snom PN 0000432 මEU: Ten Pao, model S018BAM0500200, PN 00004393•  Compatible avec Bluetooth V4.0+EDRMise au Rébut du ProduitCet appareil est soumis à la Directive 2012/19/CE et ne peut être mis au rebut avec les déchets ménagers normaux.Si vous ne savez pas ou mettre au rebut oú faire re-cycler l'appareil lorsqu'il arrive au terme de son exis-tence,  contactez  votre  municipalité,  la  société  locale en charge de la gestion des déchets ou votre vendeur.NettoyageUtilisez un tissu antistatique. N‘utilisez pas de l‘eau ou un  produit  de  nettoyage  liquide  ou  solide.  Ils  peuvent endommager l‘éléctronique ou les sufaces de l‘appareil.Installer et connecter le telephone Voir les figure B et C au verso.Initialisation et enregistrementRenseignement:  Vous devez également disposer des données pour la registration et l‘utilisation de votre compte que vous avez reçu de votre admi-nistrateur réseau ou de votre fournisseur de VoIP, normalement la numéro de téléphone, le mot de passe et le régistraire.    Une fois que l‘appareil est connecté au réseau, il com-mence à s‘initialiser et se registrer. L‘initialisation est normalement fait automatiquement via DHCP.  Si votre réseau ne supporte pas le protocole DHCP, vous devez également saisir l‘adresse IP, la passerelle IP et le serveur DNS manuellement. Demandez-les de votre administrateur réseau ou de votre fournis-seur de VoIP et suivez les instruction qui s‘achent à l‘ecran.  Après l‘initialisation, le téléphone va vous conduire à travers les paramètres de base. Sélectionnez une option avec  ou   sur la touche de navigation (fig. D) et appuyez sur la touche OK   pour sauvegarder votre sélection. 1.   Langue. Le paramètre par défaut est l'Anglais.2.  Fuseau horaire3.  Tonalité 4.    Vous voyez l‘écran „Bienvenue“. Appuyez sur une touche alphanumérique quelconque pour vous loguer.  5.   Saisissez votre numéro de poste ou votre compte et appuyez sur  .6.   Saisissez votre registraire et appuyez sur  .  7.  Redémarrez le téléphone.8.   Saisissez le mot de passe que vous avez recu de votre fournisseur de VoIP ou votre administrateur et appuyez sur  . Si l‘enregistrement a réussi l‘écran d‘attente s‘ache. Obtenir l‘adresse IP: Appuyez sur la touche .      Pour plus des informations consultez le Quick Start Guide et le mode d'emploi t sur notre site web:   www.snom.com.ITALIANOCopyright, Marchi registrati, Declinazione di responsabilita© 2018 Snom Technology Aktiengesellschaft. Tutti i di-ritti riservati.snom, i nomi dei prodotti snom, ed i loghi Snom sono marchi registrati di proprietà di Snom Technology GmbH.Snom Technology GmbH si riserva il diritto di rivedere e modificare il presente documento in qualsiasi momen-to senza alcun obbligo di notifica precedente o posteri-ore a tali cambiamenti. Sebbene sia stata prestata la massima attenzione nel-la stesura e presentazione delle informazioni in questo documento,  i  dati  su  cui  si  basa  potrebbero  già  aver subito variazioni.  Snom pertanto declina ogni respon-sabilità riguardo a tutte le garanzie di adabilità, ac-curatezza, completezza ed attualità delle informazioni pubblicate, tranne nel caso di grossolana negligenza da parte di Snom o laddove per legge possa essere ritenu-ta responsabile.Informazioni importantiPregasi leggere con attenzione le istruzioni inerenti la sicurezza,  lo  smaltimento  e  l‘installazione  del  dispo-sitivo  prima  del  suo  impiego. Tali  informazioni  vanno condivise con gli altri utenti. È altresì necessario con-servare  questo  manuale,  consegnandolo  insieme  al dispositivo qualora esso venga dato a terzi. Sicurezza Seguite le istruzioni in questo manuale e tutta la docu-mentazione relativa al dispositivo.•   Non posizionare i cavi del telefono dove può essere calpestato. Non posizionare i cavi del telefono dove può essere soggetto a pressione meccanica perchè potrebbe danneggiare i cavi. Se i cavi o la  spina si danneggiano,  scollegare  il  telefono  e  contattare  il personale di assistenza qualificato.•   Il  dispositivo  si  può  impiegare  solo  al  chiuso!  Non installare all’aperto!•   Non installare il dispositivo in ambienti con alta umidità (ad es., in bagno,  lavanderia, seminterrati umidi). Non immergere il dispositivo in acqua e non versarvi liquidi sopra•   Non installare il dispositivo nei pressi di locali a ri-schio esplosione (colorifici, ad es.). Non utilizzare il dispositivo se sentite odore di gas o di altra esalazi-one potenzialmente esplosiva.•   Non utilizzare il dispositivo durante i temporali. Qua-lora un fulmine colpisca la rete elettrica, è passibile di scossa.•   Attenzione: La cornetta contiene un magnete che potrebbe attirare oggetti pericolosi tra cui eventualmente chiodi. Prima di portarla all’orecchio assicuratevi che nessun oggetto vi sia attaccato.SELV (bassissima tensione  di sicurezza): Il nivello  di scurezza  dei  circuiti  in  ingresso  /  uscita  è  conforme alle raccomandazioni SELV. Attenzione: Per evitare scosse elettriche non collegare i circuiti SELV a quelli della rete telefonica (TNV). Le porte LAN hanno circuiti SELV, le porte PSTN hanno circuiti TNV. Conformità  Il telefono è dotato di marcatura CE e risponde agli standard europei di salute, sicurezza ed ambientali. Snom può fornire su richiesta la dichiarazione di conformità (indirizzo al retro).Eventuali modifiche, cambiamenti e l’apertura non autorizzata del dispositivo invalidano la garanzia e potrebbero annullare la marcatura CE. In caso di malfunzionamenti, contattare il servizio di assistenza autorizzato, il rivenditore oppure snom.•   Sicurezza:  IEC 60950•   Connettore:   ම2 x RJ45 (Ethernet): 1 x LAN, 1 x PC  ම2 x 4P4C (cornetta, cue con filo (non incluso)) ම1 x RJ12 මUSB: 1x tipo A, USB 2.0•   Ethernet:  2 x IEEE 802.3 / 1 Gigabit Ethernet switch•  Power over Ethernet (PoE):  IEEE 802.3af, Classe 3•   Compatibile con Bluetooth V4.0+EDR, classe 2•   Se PoE non è disponibile:  Alimentatore non inclu-so, venduti separamente:  ම Snom A6, Phihong modelo PSM10R-050, art. n. Snom 00004325;  ම Ten Pao, modelo S018BAM0500200, art. n. Snom 00004393Smaltimento del dispositivoQuesto  dispositivo  è  soggetto  alla  Diretti-va  Europea  2012/19/EC  e  non  può  essere smaltito  con i  rifiuti domestici.  Se  non  sa-pete come smaltire l’apparecchio una volta inutilizzabile,  contattate  il  comune,  la  net-tezza urbana locale, o il vostro rivenditore.PuliziaUtilizzare un panno antistatico. Evitare acqua e altri liquidi o detergenti solidi che potrebbero danneggiare la superficie o l’elettronica interna.Installare e collegare il telefono Vedi fig. B e C. Inizializzazione e registrazioneNota:  Sono necessarie le informazioni di regist-razione ricevute dal provider o amministratore del sistema – generalmente il numero di telefono o numero interno, la password e il Registrar.    Una volta impostato il telefono e averlo collegato alla rete, il telefono avvia la procedura di inizializzazione. Di norma la procedura di inizializzazione si svolge in maniera completamente automatica, mediante protocollo DHCP.  Se la rete non supporta il protocollo DHCP, è neces-sario ottenere indirizzo IP, maschera di rete, gateway IP e server DNS dal fornitore di servizi internet o amministratore di rete, quindi inserirli manualmente quando viene richiesto sullo schermo.Selezionare un‘opzione: Premere il tasto navigazione con  o  . Salvare ogni selezione: Premere il tasto OK  .  1.   Lingua. L'impostazione predifinite l‘inglese. 2.  Fuso orario 3.  Segnale di linea libera4.   Schermo „Benvenuto“: Premere un tasto qualsiasi per continuare la registrazione.     Visualizzare l‘indirizzo IP: Premere il tasto  .5.   Digitare il tuo numero di conto/telefono + premere  .6.   Inserire i dati del Registrar et premere   .  7.  Riavviare il telefono.8.   Digitare la password. Se la registrazione è riuscita, il display visualizza la schermata inattivo.Per ulteriori informazioni consultare il Quick Start Guide e il manuale d'uso alla nostra pagina web www.snom.com.ESPAÑOLPropriedad intelectual, marcas registradas, exencion de responsabilidad© 2018 Snom Technology Aktiengesellschaft: Todos los derechos reservados.snom, los nombres de los productos snom, y los logos de Snom son marcas comerciales propiedad de Snom Technology GmbH. Snom Technology GmbH se reserva el derecho de revi-sar y modificar este documento en cualquier momento, sin obligación de notificar estas revisiones o modifica-ciones por adelantado o  con posterioridad a su  reali-zación. Aunque se han tomado todas las precauciones posibles en la compilación y presentación de la información de este documento, los datos en los que se basa pueden haber cambiado con el tiempo. snom, por lo tanto, re-nuncia a cualquier garantía y responsabilidad respecto a la precisión, exhaustividad y vigencia actual de la in-formación publicada, excepto en el caso de intenciona-lidad o negligencia grave por parte de Snom cuando se deriven responsabilidades de acuerdo con las disposi-ciones legales vinculantes.Información importanteLea las instrucciones sobre seguridad telefónica y re-ciclaje del teléfóno, y sobre cómo configurar y utilizar el teléfono antes de usarlo, y ofrézcalas igualmente a otros usuarios para que las lean o se informen de su contenido. Conserve este manual y no entregue el telé-fono a terceros sin el mismo.SeguridadSiga las instrucciones de este manual y otra documen-tación aplicable del dispositivo. •   Evite  poner  el  cable  de  alimentación  del  teléfono de  modo  que  otras  personas  puedan  tropezar  con el mismo. No  coloque el cable  de alimentación  del teléfono de forma que pueda verse sometido a pre-siones mecánicas, ya que eso podria dañar el cable.  Si el cable de alimentación o el enchufe están daña-dos, desconecte el teléfono y contacte con personal de servicio cualificado.•   Este dispositivo es solamente para uso en interio-res. No debe instalarse en el exterior.•   No instale el teléfono en lugares con humedad elevada (por ejemplo, en baños, lavaderos, o sótanos húmedos). No sumerja el teléfono en agua ni derrame o vierta líquidos de ningún tipo sobre el teléfono.•   No instale el teléfono cerca de lugares con riesgo de explosión (talleres de pintura, por ejemplo). No use el teléfono si huele a gas o a otros vapores que puedan ser explosivos.  •   No use el teléfono durante una tormenta; los rayos que impacten en la red  eléctrica pueden provocar descargas eléctricas. •   Atención: El auricular contiene un imán y puede atraer pequeños objetos peligrosos, como agujas o alfileres. Antes de utilizarlo, asegúrese de que no se ha adherido ningún objeto.Cumplimiento de los requisitor SELV (Tensión Extra-Baja de Seguridad) Las condiciones de seguridad de las conexiones de entrada/salida cumplen con los requisitos SELV.Atención: Para evitar descargas eléctricas, no conecte circuitos de tensión extra baja (SELV) a circuitos de tensión de red telefónica (TNV). Los puertos LAN contienen circuitos SELV, los pouertos PSTN contienen circuitos TNV. Algunos puertos LAN y PSTN utilizan conectores RJ-45 (8P8C). Tome precauciones cuando conecte los cables.Cumplimiento con la normativa   Este teléfono tiene el marcado CE y la cer-tificación FCC, y cumple con los estándares de salud, seguridad y medioambientales europeos y de Estados Unidos. Snom puede proporcionar una declaración de conformi-dad (dirección al contraportada).Todas las modificaciones, los cambios y la apertura no autorizada del dispositivo provocarán la cancelación de la garantia, y también pueden causar la perdida del marcado CE y de la certificación FCC.•   Seguridad:  IEC 60950•   Conectores:   ම2 x RJ45 (Ethernet): 1 x LAN, 1 x PC  ම 2 x 4P4C (terminal, auricolar con cable (no incluido) ම1 x RJ12 මUSB: 1x tipo A, USB 2.0•   Ethernet:  2 x IEEE 802.3 / 1 Gigabit Ethernet switch•  Power over Ethernet (PoE):  IEEE 802.3af, Clase 3•   Compatible con Bluetooth V4.0+EDR, clase 2•   Si PoE no está disponible: Fuente de alimentación non incluso en la caja, disponible por separado:  මSnom A6, Phihong modelo PSM10R-050 - Con clip EU: artículo n.° 00004325;  - Con clip US: artículo n.° 00004326   ම Ten Pao, modelo S018BAM0500200, artículo n.° 00004394LimpiezaUse un paño antiestática. No utilice agua ni productos de limpieza,  ya que  podrían  dañar  la  superficie  o  los componentes electrónicos del aparato.EliminaciónEste  teléfono  está  sujeto  a  la  Directriz Europea 2012/19/EC, y no  puede  ser eli-minado con los residuos domésticos gene-rales. Si no sabe dónde puede desechar el dispositivo al final de su vida útil, contacte con su municipio, su proveedor de gestión de residuos local, o su vendedor.Instalación y conexión del teléfono  Ver las figuras B y C. Inicialización y registro del teléfonoFavor tener en cuenta:  Necesitará la informa-ción de registro que le haya proporcionado  su proveedor de internet o su administrador de red, normalmente el número de teléfono, la extensión, la contraseña y el registro.   Cuando haya instalado el teléfono y lo haya conectado a la red, el teléfono empezará a inicializar. Normal-mente la inicialización es totalmente automática y se realiza a través del protocolo DHCP.  Si su red no admite DHCP, debe obtener la dirección IP, la máscara de red, el IP de la puerta de enlace y el servidor DNS de su proveedor de internet o su admi-nistrador de red e introducirlos manualmente cuando se le solicite en la pantalla.Cuando se le indique, pulse la flecha tecla   o   en el tecla de  navegación para seleccionar una opción. Pulse la tecal con y guarde los cambios con   para guardar la seleccion. 1.   Idioma.  El idioma estandar de fábrica es inglés.2.  Huso horario3.  Tono de marcado4.   La pantalla mostrará: "Bienvenida". Pulse cualquier tecla para registrar.    Para ver la dirección IP, pulse la tecla   . 5.   Introduzca la cuenta/el número de teléfono y pulse  .6.   Introduzca el registro (Registrar) y pulse   . 7.  Reinicia el teléfono.8.   Introduzca la contraseña  y pulse  . Una vez regis-trado, se ve la pantalla inactiva.Para más información, consulte el Quick Start Guide y el manual de uso en nuestra página web  http://www.snom.com.
D785 VoIP PhoneIMPORTANT ADDITIONAL INFORMATIONUSA and CanadaFCC part 15This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be requi-red to correct the interference at the user’s expense.WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Privacy of communications may not be ensured when using this telephoneRF Radiation ExposureThis VoIP Phone complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.Caution: To maintain the compliance with the FCC‘s RF exposure guideline, place the VoIP Phone at least 20 cm from nearby persons. Industry CanadaThis Class A digital apparatus complies with Canadian requirements:  CAN ICES-3 (A)/NMB-3(A).This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Privacy of communications may not be ensured when using this telephone.The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Innovation, Science and Economic Development Canada technical specifica-tions.RF Radiation ExposureThis VoIP phone also complies with Industry Canada RSS-102 with respect to Health Canada’s Safety Code 6 for human exposure to radiofrequency electromagnetic energy.Cet appareil numérique de la classe A est conforme à la norme NMB-003(A) du Canada.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’ex-ploitation est autorisée aux deux conditions suivantes:  (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.La confidentialité de vos conversations n‘est pas garantie avec cet appareil.Le terme « IC » avant le numéro d‘homologation ne signifie seulement que les normes d‘Industrie Canada ont été respec-tées. Le présent produit est conforme aux spécifications techniques applicables d‘Innovation, Sciences et Développement économique Canada.Exposition aux Radiofréquences ÉlectromagnétiquesCet appareil est conforme à la norme CNR-102 d‘Industrie Canada en ce qui concerne le Code de Sécurité 6 de Santé Canada sur l‘exposition humaine aux champs de radiofréquences électromagnétiques.Snom Technology GmbHWittestr. 30G13507 BerlinGermanywww.snom.com                 v2018001
•  Use only Ethernet cable packed in the giftbox.•  Ferrite Cores are incorporated with Ethernet cable.Remarks

Navigation menu