Veebeam RC2-SC4404R RC2 Model WUSB Dongle Module User Manual

Veebeam Limited RC2 Model WUSB Dongle Module Users Manual

Users Manual

© 2010 Staccato Communications Page 1 of 5 The information in this document is proprietary to Staccato Communications It is not to be partially or wholly reproduced or disclosed to any third party without prior permission Wireless USB Dongle Reference Design ‘User Manual’ Revision History WUSB Dongle Reference Design Version Publish Date Author & Department Description 1.0 22-Feb-10 Dennis Laudick/Marketing Created initial version
WUSB Dongle Reference Design Copyright © 2010 Staccato Communications Page 2 of 5 COMPANY CONFIDENTIAL WUSB Dongle Ref Des User Manual v1_0 1 Introduction The document is a high level user guide for the Staccato Wireless USB Dongle Electrical Reference Design. The reference design consists of all hardware/electrical information necessary for an ODM to create a standard compliant Wireless USB dongle. The design itself looks as follows: Figure 1 - Dongle Top Figure 2 - Dongle Bottom
WUSB Dongle Reference Design Copyright © 2010 Staccato Communications Page 3 of 5 COMPANY CONFIDENTIAL WUSB Dongle Ref Des User Manual v1_0 1.1 Reference Design Usage The dongle reference design is based on the Staccato Ripcord2© Ultra-Wideband RF transceiver IC. The dongle reference design contains all electrical information necessary for an electrical manufacturer to recreate an exact duplicate of the original design as developed by Staccato. The dongle reference design provides a generic Ultra-Wideband and Wireless USB receiver/transmitter working in WiMedia bandgroup 1 and supporting both FFI (fixed frequency operation) and TFI (three frequency hopping) channels. By putting different firmware images and configurations in the dongle, the OEM can then use this generic ‘platform’ or ‘module’ in a variety of end product applications such as Mass Storage Class cable replacement, audio/video equipment and cable replacement for any standard USB cable. 1.2 Environmental Performance Feature Requirement (SD & HD) Operating Environment Operating Temperature: 0°C to 40°C Humidity: 90% non-condensing Storage Environment Storage Temperature: -20°C to 85°C Humidity: 90% non-condensing Shock/drop There are no specific requirements for shock/drop (noted for future reference) MTBF/FIT There are no specific requirements for MTBF/FIT (noted for future reference) 1.3 Reference Design Contents The dongle reference design consists of the following information: o Electrical schematics o PADS PCB layout information o Electrical Bill Of Materials 1.4 FCC Statement The following FCC statements/requirements apply to this design as provided. For use under FCC regulations, this text is also required in any subsequent end product documentation for which this reference design is used:
WUSB Dongle Reference Design Copyright © 2010 Staccato Communications Page 4 of 5 COMPANY CONFIDENTIAL WUSB Dongle Ref Des User Manual v1_0 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies is authorised under 47 CFR 15.519(a)(1) of the FCC Rules and Regulations. The operation of this device is subject to the following restrictions: • This UWB device shall transmit only when it is sending information to an associated receiver. • This UWB device shall cease transmission within 10 seconds unless it receives an acknowledgment from the associated receiver that its transmission is being received. An acknowledgement of reception must continue to be received by the UWB transmitter at least every 10 seconds or the UWB device must cease transmitting. Warning: Changes or modifications to this device not expressly approved by Staccato could void the users authority to operate the device under the FCC Equipment Authorization. 1.4.1 FCC Attestation Statement The following attestation statement applies to this reference design and any derived products/designs: 1.4.2 Labelling Labelling of any end product is required to prominently display the any associated FCC ID. The following is a suggested, example label for an end product:
WUSB Dongle Reference Design Copyright © 2010 Staccato Communications Page 5 of 5 COMPANY CONFIDENTIAL WUSB Dongle Ref Des User Manual v1_0 1.5 Summary The Staccato Wireless USB Dongle Reference Design provides ODMs and OEMs with an complete, easy to implement design for producing a generic Wireless USB dongle complying to FCC, WiMedia and Wireless USB RF requirements. Used in conjunction with suitable application firmware, it provides a safe, fast time-to-market strategy for a variety of Wireless USB products and application. By adhering to the dongle reference design, ODMs/OEMs can ensure the highest level of conformance, minimum risk and rapid product realisation. Wireless USB Dongle P/N: xxxxxxxxx S/N: yymmddnnnnnn MAC: 112233445566 Contains FCC ID: UQL-RC2-SC4404R

Navigation menu