Venstar SKYPORT4 Wi-Fi Module, for a Thermostat User Manual

Venstar Inc Wi-Fi Module, for a Thermostat

User Manual

OVERVIEWThis Wi-Fi module is intended to be installed in a compatible Voyager thermostat. Please consult GoodmanThermostats.com for a complete listing of compatible thermostats. At minimum, the rst 4 tasks of the 5 below must be successfully completed to access your thermostat remotely from a browser. The 5th step is optional, although highly recommended, and is only needed to access your thermostat from a compatible mobile device using the Skyport app. Wi-Fi Module Installation InstructionsTHE 5 TASKS ARE:1. Installation of the module into a Voyager thermostat.2. Connection to a local Wi-Fi access point with Internet access. This is made easy with the help of the Venstar Congurator app. (Downloaded from your mobile device’s app store)3. A 6-digit code obtained from the thermostat entered into a Skyport account.4. Creation of a Skyport account with conrmation of a Skyport Messenger generated verication email.5. Download and install the Venstar Skyport app on your mobile device from your device’s app store.INSTALLATION OF THE MODULE1. Separate the front housing from the backplate of the thermostat.2. Install the Wi-Fi module as shown onto the printed circuit board.RCAUXDEHUMHUMW3W2W1/O/BGY1Y2REMOTE/OUTDOORDRYCONTACTTo remove the thermostat backplate: gently pry with screwdriver in either slot to remove back platemodel TSTATGAC-VWF3. Carefully press the front housing with installed WiFi module back on to the backplate.

Navigation menu