Venture Global DCX-25 Vibrating Pager User Manual 3
Venture Global Limited Vibrating Pager 3
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2181572 |
| Application ID | +bezsra+jAk4ba4rfeKeHA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 36.32kB (454011 bits) |
| Date Submitted | 2014-01-30 00:00:00 |
| Date Available | 2014-01-30 00:00:00 |
| Creation Date | 2013-08-22 16:53:35 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2013-08-22 16:53:35 |
| Document Title | 無標題-3 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Lowes Lo |
USER MANUAL CODE MATCHING & TUNE SELECTION PARTS & FUNCTION Speaker ID Reset Function switch Vibration & Melody Belt Clip Zone select button Melody selector Reset Vibration Melody Step 1: Insert battery to the transmitter to be used e.g.door bell. Step 3: Enter pairing mode for receiver (pager unit). Press and hold the zone select button for 3 seconds. The LED #1 will ďŹash. Step 4: Press the button again to move to the zone you wish to pair with. Press melody selector to scroll through the melodies. Once you hear your preferred melody, do not press again as it is now selected. OPEN Step 5: Once the zone and melody are selected with the zone icon ďŹashing, trigger the transmitter once to pair. If successful, the receiver (pager) will generate a short tone. Press the button to exit pairing mode, the system is ready to use. Battery Compartment MOUNTING To stop the Vibrating Pager whilst it is alerting press the reset button Clear the transmitter on the Pager memory First, press and hold the button for 3 seconds to enter the pairing mode. Press the button to move to the zone which is to be deleted. Press and hold the and buttons together for 3 seconds. The receiver will generate a tone to indicate the transmitter on this zone has been deleted. Or Reset Reset Hang on the wall Change the melody in desired zone Clip on Belt First, press and hold the button for 3 seconds to enter the pairing mode. Press the button to move to the zone then press the button to select the melody required. Press the button until the pairing mode is exited. POWER 1. Slide to open the battery cover 2. Insert 2 AA batteries 3. Close the battery cover. OPEN Battery low indicator If a zone LED light is blinking, it indicates that the battery is low for this transmitter. You must replace the battery as soon as possible. If the Pager beeps every 5 seconds, this indicates the Pager batteries are low. You must replace the batteries of the Pager. Using 2 x AA size Battery FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: ModiďŹcations to this product will void the user's authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2013:08:22 16:53:35+08:00 Modify Date : 2013:08:22 16:53:35+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Lowes Lo Creator : CorelDRAW X6 Title : 無標題-3EXIF Metadata provided by EXIF.tools