Venture Global HAX-120 Wireless Door / Window Sensor User Manual 1
Venture Global Limited Wireless Door / Window Sensor 1
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3162821 |
| Application ID | 9OGTIJhYZ1lIMZCEOkxKeg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 35.36kB (441985 bits) |
| Date Submitted | 2016-10-13 00:00:00 |
| Date Available | 2016-10-13 00:00:00 |
| Creation Date | 2016-07-30 09:56:47 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2016-07-30 10:03:31 |
| Document Title | 無標題-1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Lowes Lo |
USER MANUAL Parts and Function HAX-120 Battery Installation Magnet Align mark Installation Install a CR2032 batterĐ˝ to the battery compartment. Stick the double sided tape on the back of the alarm unit, then remove the back paper of the double sided tape. Stick the alarm unit to the window/door frame and the magnet unit to the door/window by the side of the alarm unit.. LED indicator Reset Code Button Battery cover Battery compartment Open battery cover Insert the CR2032 battery Code Matching & Melody Selection The magnetic sensor works with the receiver (chime) And must be paired before using Step 1: Insert batteries to the sensor. Step 2: Insert batteries to the receiver (chime). Step 3: Enter pairing mode for receiver (chime unit). Press and hold the zone selector button 3 seconds. The LED #1 will flash. Step 4: Press the button again to move to the zone you want to pair with. Press melody selector to scroll through the melodies. Once you hear your preferred melody, do not press again as it is now selected. Step 5: Once you have selected the zone and melody, trigger the magnetic sensor by holding the sensor and magnet together, then move them apart. If successful, the receiver will generate a short tone. Press the button to exit Pairing mode, the system is now ready to use. Operation When the magnet moves away from the sensor unit, the sensor send out a signal to the receiver (chime). Code Conflict If the transmitter coding is the same as another transmitter you must change the code. When you have changed the code re-pair the transmitter is needed. Press and hold 3 seconds to reset the code using a pen. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: ModiďŹcations to this product will void the user's authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Lowes Lo Title : 無標題-1 Create Date : 2016:07:30 09:56:47+08:00 Creator Tool : CorelDRAW X6 Modify Date : 2016:07:30 10:03:31+08:00 Metadata Date : 2016:07:30 10:03:31+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:3623e28e-85b0-4a2f-9bfe-60239a775230 Instance ID : uuid:48c03cca-e122-4812-a445-be5e415fd95a Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Author : Lowes LoEXIF Metadata provided by EXIF.tools