Venture Global PB-X38 Wireless Door Bell Press User Manual 2
Venture Global Limited Wireless Door Bell Press 2
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3765543 |
| Application ID | RR9nv+91OmpMFQ6mCVggqw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 46.72kB (583939 bits) |
| Date Submitted | 2018-03-01 00:00:00 |
| Date Available | 2018-03-01 00:00:00 |
| Creation Date | 2018-02-26 14:40:56 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2018-02-26 14:40:56 |
| Document Title | 無標題-2 |
| Document Creator | CorelDRAW X6 |
| Document Author: | wwliu |
USER MANUAL BELL PRESS Part & Function Replace Battery Lock lever Indicator Mounting bracket Push button Battery compartment Battery Installation Battery Cover Mounting holes Use a small flat screwdriver to release the lock lever. Rotate the bell press anticlockwise with 90 degree and pull out the unit. Replace battery Code Conflict If the bell press coding is the same as another transmitter you must change the code. When you have changed the code re-pair the telephone signaler. Use the finger to unlock the lock lever Rotate the mounting bracket and bell press into 90 degree. Remove the mounting bracket from the unit. Rotate the Battery cover using a coin. Insert a CR2032 battery to battery compartment provided. Close the battery cover using a coin. Matching (Pair) Open the battery cover 1. 2. 3. 4. 5. 6. Take out the battery Press and hold the test button, insert the battery whilst holding the button for 5 seconds. The LED will flash 5 times when a new code is generated Set the receiver to pairing mode follow the instruction of the receiver. Press the button of the bell press to pair. Then follow the instruction of the receiver to complete the operation. Install Mounting with screws Mounting With Double-sided adhesive 4mm Battery Low When the battery is battery low, It will send the battery low information to the receiver together with trigger signal. The battery low information will show on the receiver. FCC Statement: 49mm This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. / 7mm Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 25mm Requires an electric drill for holes to fix the wall bracket with the provided ram plug and screws. Stick the double-sided adhesive on the mounting bracket. Put the bell press to the bracket stick the bracket on the door frame. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Put the bell press to the bracket with 90 degree. Rotate the bell press clockwise until you fell locked
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2018:02:26 14:40:56+08:00 Modify Date : 2018:02:26 14:40:56+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : wwliu Creator : CorelDRAW X6 Title : 無標題-2EXIF Metadata provided by EXIF.tools