Venture Global RPX1000 Signal Repeater User Manual 3

Venture Global Limited Signal Repeater 3

User Manual

RoHS2002/95/ECFCC StatementNOTE: This equipment has been tested and found to comply with the Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connet the equipment into an outlet on a circuit different from that to which the receiver is connected.3. Consum the dealer or an experienced radio/TV technician for help.Note: Modifications to this product will void the user's authority to operate this equipmentChoice a location to place the repeater, make sure the repeater can receive the signal from the transmitter (The LED indication will lit when receive a valid signal.). and the receiver will receive the signal from the repeater. When install more than one repeater need another special caution, otherwise it will cause oscillationUSER MANUALParts & FunctionLED indicator PowerOn/OffDC6VBattery DoorSettingInstallationThis unit do not need any setting, Just switch on the power Hanging holePlace the repeater middle of the transmitter and receiver to extend the cover range. Place the repeater on the corner to eliminate the blind area.TransmitterTransmitterTransmitterTransmitterReceiverReceiverReceiverReceiverReceiverRepeaterRepeateroscillation XXChoice the location for repeater that does not inside the cover area of the other repeater. The transmission range of the repeater cover another repeater. It cause oscillation. RPX1000

Navigation menu