Verbatim 095210 Wireless Optical Mouse User Manual 582996
Verbatim Wireless Optical Mouse 582996
Verbatim >
Users Manual
e Wireless Optical Mouse User Manual ped wireless RF mice in our company, and it uses the global-used frequency of 27MHz. The comfortable and e bondage of wires and enjoy your beautiful life from the high technology. The Steps of Install Battery 1, Please prepare for two PCS new AAA alkaline batteries 2, Press the button of the mouse upper cover and pull the battery cover rearward (Please see the referenc 3, Please insert the batteries correctly according to the polarity marks of the battery grooves. 4, Pull the battery covers forward, when you hear “crack” sound which shows the battery cover is locked su Receiver Installation 1, please use extended cable, and put the receiver and transmitter on one desktop, in this way, you may hav 2, If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the connector before yo n many mice being used at the same time. 3, For laptop, you may connect the receiver directly with the USB connector. nd scientific. charge for the mouse. Even if there is no battery in the mouse, you can use the mouse directly, thus it resolve matically, at this time, mouse begin to work. If you push the receiver back to the transmitter, power will be cut ID Setup 1, Please move the mouse near to the receiver 2, Press the ID button of the mouse bottom with some hard and acuate object within 10 seconds, the rec successfully to finish the digital transmission between the mouse and the receiver. You may start to use 3. Working distance: within 0.6-1.5 m Any changes or modifications not expressly approved by the party responsible for compliance could v Note Note: This equipment has been tested and found to comply with the limits for a Class B digital device reasonable protection against harmful interference in a residential installation. This equipment genera accordance with the instructions, may cause harmful interfer- ence to radio communications. Howeve If this equipment does cause harmful interference to radio or television reception, which can be determ the interference by one or more of the following measures: , please change batteries or charge them .The mouse can use USB line to charge, connect one side of USB --Reorient or relocate the receiving antenna. he mouse, thus it can successfully charge the battery. It can charge while you use the mouse. It is full within --Increase the separation between the equipment and receiver. that the time of charge may vary when the degree of discharge is different. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition accept any interference received, including interference that may cause undesired operation. more smoothly. n be used longer time. Please remove the batteries if the mouse will not be used for a long time or if you travel scroll the wheel to wake up the mouse when it is sleeping. witch of the mouse bottom over 3 secons.If you want to take on the power,please click the ID switch once again. cting surface, 3D mouse pad. ashes, which shows that the power is nearly finished. Please change the proper-sized new battery or charge it se on business, and press the switch of ID for a long time so as to switch off the power.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2005:09:19 07:14:44-04:00 Modify Date : 2005:09:19 07:14:44-04:00 Page Count : 2 Creation Date : 2005:09:19 11:14:44Z Mod Date : 2005:09:19 11:14:44Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : Administrator Metadata Date : 2005:09:19 11:14:44Z Creator : Administrator Title : Microsoft Word - 582996.DOCEXIF Metadata provided by EXIF.tools