User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2972509 |
| Application ID | mRjPWHgpzhsJBX81snIFzQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 275.52kB (3444038 bits) |
| Date Submitted | 2016-04-27 00:00:00 |
| Date Available | 2016-10-23 00:00:00 |
| Creation Date | 2017-12-03 13:21:27 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-03 13:21:27 |
| Document Title | untitled |
| Document Creator | FrameMaker 7.1 |
C680 3G Installation Guide Verifone Part Number DOC268-063-EN-A, Revision A C680 Installation Guide © 2015 Verifone, Inc. All rights reserved. No part of the con tents of this document may be reproduced or transmitte d in any form witho ut the written permission of Verifone, Inc. The information contained in this document is subj ect to chan ge without notice. Although Verifone has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are for illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample program before placing the software into productive use. This document, including without limitation the examples and software programs, is supplied “As-Is.” Verifone, the V erifone logo, VeriCentre, and Verix are registered trademarks of Verifone. Other brand names or trademarks associated with Verifone’s products and services are trademarks of Verifone, Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Comments? Please e-mail all comments on this document to your local Verifone Support Team. Verifone, Inc. 1-800-Verifone www.verifone.com Verifone Part Number DOC268-063-EN-A, Revision A CONTENTS PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conventions and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acronym Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHAPTER 1 Terminal Overview Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Exceptional Ease of Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Performance and Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Communication Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 10 10 10 CHAPTER 2 Setup Terminal Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contactless Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside the Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminal Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the SIM/SAM/Micro-SD Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connection Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cabling Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dedicated Micro-USB Device Port Connection. . . . . . . . . . . . . . . . . . . . . . . Micro-USB Host Port Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Powered RS-232/4-Pin Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Powered RS-232/RJ11 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the Paper Roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Behavior (No Power Pack). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manual Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manual Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conducting Smart Card Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conducting a Contactless Transaction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Periodic Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11 12 12 12 12 13 14 16 16 16 16 17 17 17 18 18 19 19 19 20 20 20 20 21 21 22 C680 INSTALLATION GUIDE C ONTENTS CHAPTER 3 Specifications and Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Maintenance Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 External Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning the Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminal Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Smart Card Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 23 23 24 24 CHAPTER 4 Verifone Service Returning a Terminal for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 and Support Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Power Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printer Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Verifone Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Micro-USB Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 26 26 26 27 CHAPTER 5 Troubleshooting Terminal Does Not Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Guidelines Does Not Show Correct/Readable Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Battery Does Not Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blank Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printer Does Not Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printer Paper Jam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transactions Fail to Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C680 INSTALLATION GUIDE 30 30 30 31 31 31 PREFACE This guide is your primary source of information for setting up and installing the C680 terminal. Audience Organization This guide is useful for anyone installing and configuring a C680 terminal. Basic descriptions of the terminal features are also provided. This guide is organized as follows: Chapter 1, Terminal Overview. Provides an overview of the terminal. Chapter 2, Setup. Explains how to set up and install the terminal. Provides information on how to select a location, establish power, and how to configure optional peripheral devices. Chapter 3, Specifications and Maintenance. Discusses power requirements, dimensions, and how to maintain the terminal. Chapter 4, Verifone Service and Support. Provides information on contacting your local Verifone representative or service provider, and information on how to order accessories or documentation from Verifone. Chapter 5, Troubleshooting Guidelines. Provides troubleshooting guidelines, should you encounter a problem in terminal installation and configuration. Related Documentation To learn more about the C680 terminal, refer to the following set of documents: C680 Certifications and Regulations Sheet DOC268-061-EN C680 Quick Installation Guide DOC268-062-EN C680 Reference Guide DOC268-064-EN Verix eVo Volume I: Operating System Programmers Manual DOC00301 Verix eVo Volume II: Operating System and Communications Programmers Manual DOC00302 C680 INSTALLATION GUIDE P REFACE Conventions and Acronyms Conventions and Acronyms This section describes the conventions and acronyms used in this guide. Document Various conventions are used to help you quickly identify special formatting. Table Conventions 1 describes these conventions and provides examples of their use. Table 1 Convention Meaning Example Blue Text in blue indicates terms that are cross referenced. See Conventions and Acronyms. Italics Italic typeface indicates book titles or emphasis. You must install a roll of thermalsensitive paper in the printer. Courier The courier type face is used while specifying onscreen text, such as text that you would enter at a command prompt, or to provide an URL. http://www.verifone.com The pencil icon is used to highlight important information. RS-232-type devices do not work with the PINpad port. The caution symbol indicates possible hardware or software failure, or loss of data. The terminal is not waterproof or dustproof, and is intended for indoor use only. The lightning symbol is used as a warning when bodily injury might occur. Due to risk of shock do not use the terminal near water. NOTE CAUTION WARNING C680 INSTALLATION GUIDE Document Conventions P REFACE Conventions and Acronyms Acronym Definitions Various acronyms are used in place of the full definition. Table 2 presents acronyms and their definitions. Table 2 Acronym Definitions Acronym Definitions AC Alternating Current CDMA Code Division Multiple Access EMV Joint Europay, MasterCard and Visa Standard GPRS General Packet Radio Service GSM Global System for Mobile Communication HDMI High-Definition Multimedia Interface ITP Internal Thermal Printer LCD Liquid Crystal Display LED Light Emitting Diode MRA Merchandise Return Authorization MSAM Micromodule-Size Security Access Module PED PIN Entry Device PIN Personal Identification Number POS Point-of-Sale QVGA Quarter Video Graphics Array RJ11 Registered Jack 11 RS-232 Recommended Standard 232 R-UIM Removable User Identity Module SAM Security Access Module SD Secure Digital SIM Subscriber Identity Module TFT Thin Film Transistor UART Universal Asynchronous Transmitter/Receiver USB Universal Serial Bus VPN Verifone Part Number C680 INSTALLATION GUIDE P REFACE Conventions and Acronyms C680 INSTALLATION GUIDE CHAPTER 1 Terminal Overview C680 features a color screen display, fast processor, abundant memory, and PCI 4.0 security. It is a portable, battery-powered device designed to fit comfortably during handheld consumer-facing applications. It features a 3.5” TFT LCD display and spill-resistant keypad. It supports the GPRS or 3G communications technology. Figure 1 NOTE C680 Terminal Verifone ships variants of this terminal for different markets. Your terminal may have a different configuration. C680 INSTALLATION GUIDE TERMINAL O VERVIEW Features and Benefits Features and Benefits This terminal provides the right combination of features and functions including a triple-track magnetic stripe card reader, smart card reader, color screen display, and a quiet yet fast internal thermal printer (ITP). Exceptional Ease of • Use • 3.5” TFT LCD display for boundless application possibilities and easy readability under various lighting conditions. • keypad provides tactile response to simplify usage and minimize finger slips. • 40 mm diameter paper roll support with a trouble-free, drop-in, “clam shell” loading and dual tear bar that allow receipts to be torn in any direction. • Quiet and fast integrated thermal printer. • Vertical magnetic stripe card reader with an extended blade for optimal card reading. Performance and • Durability • High-capacity 3.7 V, 2450 mAh Li-ion battery. Base for drop-and-go charging. • Rounded corners and drop resistant to 3 feet on concrete floor to minimize breakage. • 192 MB of memory. PCI PED 4.0 approved for debit and other PIN-based transactions. • EMV Level 1 Type Approval. • Tamper-resistant construction, SSL protocols, and VeriShield file authentication. Communication • Technology C680 INSTALLATION GUIDE Fast transactions due to powerful 400 MHz ARM11 processor. • Security • 10 Lightweight, tapered design, compact, stylish and the ergonomic balance allows convenient terminal hand-off to the consumer for PIN entry or other input. C680 GPRS/3G: Long-range wireless payment for retailers that have no physical location limitations. CHAPTER 2 Setup This chapter describes the terminal setup procedures for: Terminal Location • Terminal Location • Inside the Shipping Carton • Terminal Features • Installing the SIM/SAM/Micro-SD Cards • Connection Ports • Installing the Paper Roll • Power Supply • Using the Battery • Battery Behavior (No Power Pack) • Charging the Battery • Conducting Smart Card Transactions • Using the Magnetic Card Reader • Conducting a Contactless Transaction Use the following guidelines when selecting a location for the terminal. Ease of Use • • Select a flat support surface, such as a countertop or table. • Select a location near a power outlet, ECR, or computer connected to the terminal. Do not string cables or cords across a walkway for safety. Environmental • Factors CAUTION Select a location convenient for both merchant and cardholder. Do not use where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. • Keep away from direct sunlight and anything that radiates heat, such as a stove or motor. • Do not use outdoors. This unit is not waterproof or dustproof and is intended for indoor use only. Any damage to the terminal from exposure to rain or dust may void any warranty. C680 INSTALLATION GUIDE 11 S ETUP Inside the Shipping Carton Electrical • Considerations • Avoid using the unit during electrical storms. • Do not use near water or in moist conditions. • Disconnect the device from its POS terminal before cleaning. WARNING Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, electric motors, neon signs, high-frequency or magnetic security devices, or computer equipment). Do not use near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool to avoid shock or damage. Contactless Avoid having metallic objects in proximity of the contactless antenna. If you need Considerations to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic mounting plate. PIN Protection The C680 is a handover device. Always exercise extreme caution when Measures conducting transactions, specially during PIN entry. Inside the Shipping Carton • Hand the terminal directly to the cardholder for PIN entry. • Encourage the cardholder to hold the terminal close to avoid others from seeing the information being entered. Open the shipping carton and carefully inspect its contents for possible tampering or shipping damage. The terminal is a secure product. Tampering causes it to cease to function or to operate in an unsecured manner. Unpacking the To unpack the shipping carton: Shipping Carton 1 Remove and inspect the following items: • Terminal • Power pack • Paper roll Figure 2 12 C680 INSTALLATION GUIDE Items Inside the Box S ETUP Terminal Features 2 Remove all plastic wrapping from the terminal and other components. 3 Remove the clear protective film from the LCD screen. 4 Save the shipping carton and packing material for future repacking or moving the terminal. CAUTION Do not a unit that has been damaged or tampered with. The terminal comes equipped with tamper-evident labels. If a label or component appears damaged, please notify the shipping company and your Verifone representative or service provider immediately. Terminal Features Familiarize yourself with the terminal features before continuing with the installation process: THERMAL PRINTER TOUCHSCREEN DISPLAY MAGNETIC CARD READER TELEPHPONE-STYLE KEYPAD SMARTCARD READER Figure 3 C680 Terminal Features The unit offers the following features: • A 3.5” touch screen, TFT LCD display. • A set of keys that include: a A 12-key, telephone-style keypad (keypads may vary in style). b Three color-coded function keys below the keypad (from left to right: CANCEL, CLEAR, ENTER). • A magnetic card reader, built into the right side. An icon illustrates the proper card direction, with the magnetic stripe down and facing inward, toward the keypad. C680 INSTALLATION GUIDE 13 S ETUP Installing the SIM/SAM/Micro-SD Cards Installing the SIM/SAM/MicroSD Cards • An internal thermal printer at the top front of the terminal. • A smart card reader, built into the bottom of the terminal. An icon indicates the proper card position and insertion point. • A SAM (Security Access Module) compartment, built into the bottom of the terminal inside the back compartment. You may need to install or replace a GSM SIM (Subscriber Identity Module) card, one or two SAM (Security Access Module) cards, or a micro-SD card. To Install or Replace a 1 SIM Card Ensure that the terminal is turned off. 2 Place the terminal upside down on a soft, clean surface to protect the lens from scratches. 3 Gently push the compartment cover’s locking mechanish to release. Lift and remove the cover. Figure 4 Remove Terminal Back Cover 4 Lift the battery pack. 5 Remove the card slot cover by pushing the movable side of of the terminal with your finger or by using a screw driver to release. LOC OPE Figure 5 14 C680 INSTALLATION GUIDE Remove Card Slot Cover S ETUP Installing the SIM/SAM/Micro-SD Cards 6 With the gold contacts facing down, insert the SIM/SAM card into the cardholder. LOCK OPEN Figure 6 SIM/SAM Card Installation For micro-SD card, slide down the card slot cover to open. Insert the SD card facing down and slide back the slot cover to lock. PE PE LO LO LOCK OPEN Figure 7 SD Card Installation 7 Return the card card slot cover. 8 Return the battery pack to its original position. 9 Close and screw the back compartment cover. C680 INSTALLATION GUIDE 15 S ETUP Connection Ports Connection Ports The terminal has one primary micro-USB port on the side used for power and download. There is another micro-USB connector USB Host located at the back of the terminal for peripheral connection. Powered RS-232 is supported via RJ11 for modem connection, and via a 4-pin connector debug and OS download. 4 PIN WIRE Figure 8 Connection Ports Cabling The following are cabling scenarios on your unit: Connections 1 Dedicated Micro-USB Device Port Connection 2 Micro-USB Host Port Connection. 3 Powered RS-232/4-Pin Connection. 4 Powered RS-232/RJ11 Connection Dedicated Micro- The micro-USB Device port on the side of the unit is dedicated to download/power USB Device Port charging. Insert the micro-USB plug end of the Host connector cable to the microConnection USB port on the terminal to connect. Figure 9 Dedicated Micro USB Device Port Micro-USB Host The micro-USB Host port on the back of the unit is used for connecting peripheral Port Connection devices. Insert the micro-USB plug end of the pheriperal cord to the micro-USB port on the back of the terminal to connect. 16 C680 INSTALLATION GUIDE S ETUP Installing the Paper Roll Powered RS-232/4- The powered RS-232/4-pin connector on the back of the terminal is mainly Pin Connection designed for 1D/2D barcode scanner. Powered RS-232/ Similar to 4-pin connection, powered RS-232/RJ11 connector on the back of the RJ11 Connection terminal is designed for 1D/2D barcode scanner. Installing the Paper Roll A fast, quiet thermal printer is built into the terminal. Before you can process transactions that require a receipt or record, you must install a roll of thermalsensitive paper in the printer. The ITP uses a roll of 40 mm single-ply, thermal-sensitive paper. A pink out-ofpaper indicator line appears on the edge of the paper approximately 18 inches before the end of the roll. After this line appears, there is enough paper remaining on the roll to conclude at least one transaction. CAUTION Poor-quality paper can jam the printer and create excessive paper dust. To order high-quality Verifone paper, refer to Accessories and Documentation. Store thermal paper in a dry, dark area and handle carefully. Impact, friction, temperature, humidity, and oils affect the color and storage characteristics of the paper. Never load a roll of paper with folds, wrinkles, tears, or holes at the edges in the print area. To Install a Paper Roll 1 Gently pull the latch located on top of the terminal to unlock the paper roll cover. Figure 10 Paper Roll Installation 2 Lift the printer cover up to open. 3 Remove any partial roll of paper in the printer tray. 4 Loosen the glued leading edge of the new roll of paper or remove the protective strip, if applicable. Unwind the paper roll past any glue residue. 5 Hold the roll so the paper feeds from the bottom of the roll. 6 Drop the paper roll into the printer tray. 7 Pull paper up past the glue residue on the paper roll. C680 INSTALLATION GUIDE 17 S ETUP Power Supply 8 Close the paper roll cover by gently pressing directly on the cover until it clicks shut, allowing a small amount of paper past the glue residue to extend outside the printer door. CAUTION To prevent damaging the print roller, always gently press down on the paper roll cover to close it. 9 Tear the paper off against the serrated plastic strip in the printer. Power Supply After establishing all necessary connections, connect the power pack to the terminal and into a wall outlet or powered surge protector to charge the battery for six hours or until fully charged. WARNING Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. During a transaction, disconnecting the power by removing the battery or unplugging the terminal from a wall power while at very low battery charge may cause transaction data files not yet stored in the terminal memory to be lost. Each C680 terminal comes with power supply (VPN PWRXXX-001-XX-A) used to connect the terminal directly to a power outlet and to charge the battery. The C680 unit comes with a universal input power pack capable of operating from voltages of 100 V to 240 V AC. NOTE To protect against possible damage caused by lightning strikes and electrical surges, consider installing a power surge protector. Once it loads the application, the terminal starts the initial Verifone copyright screen and displays a unique copyright screen. If there is no available application in the terminal, DOWNLOAD NEEDED appears on screen after the initial Verifone copyright screen. Using the Battery The C680 terminal uses a single cell Li-ion battery (see Accessories and Documentation for ordering information). The internal logic of the battery prevents both overcharging and undercharging (a fault condition in which the battery level goes well below the minimum acceptable charge and the battery becomes unusable). NOTE The C680 terminal will only operate when the battery is installed. 18 C680 INSTALLATION GUIDE S ETUP Battery Behavior (No Power Pack) Battery Features The following are features of the battery: NOTE Battery Behavior (No Power Pack) • Single cell Li-ion 2450 mAH battery pack. • A safety circuit that: • Prevents cell damage from overcharge, over-discharge, or overheating. • Activates when the battery is left in an unused terminal for extended periods. • C680 battery pack (PN BPK260-001-01-A) not customer changeable and therefore should not be disconnected and removed. • Li-ion batteries are not affected by shallow charging. Furthermore, when the terminal has no external power source or battery, the coin cell battery provides power to the security circuit. • Disconnecting and removing the battery, as well as unplugging the terminal power pack, reduce the life of the coin cell battery, which does not recharge and must be replaced if drained. • Conserve battery power by turning the C680 terminal off when not in use. Keep the Li-ion battery inserted in the terminal and power up the terminal periodically to check the battery charge. Do not let the battery charge fall below 10% for extended periods of time as this may permanently diminish the battery capacity. Recharge the battery by attaching the micro-USB end of the power pack to the terminal and plugging the other end of the power pack into a wall outlet. The terminal shifts to power pack mode and starts up automatically when the C680 is connected to a non-battery power source, regardless of the battery charge state. Manual Startup Hold the green key down for about 4 seconds until the terminal displays the startup screen. NOTE The 4-second power-up delay prevents terminal startup if the green key is accidentally held down. The time required to hold the green key down to power up the terminal is configurable. For more information, see C680 Reference Guide – VPN DOC269-004-EN). The Verifone copyright screen starts and displays a unique copyright screen once the terminal loads an application. However, DOWNLOAD NEEDED appears on screen after the initial Verifone copyright screen if there is no available application in the terminal.. C680 INSTALLATION GUIDE 19 S ETUP Charging the Battery Manual Shutdown Hold the red key down for about 4 seconds until the terminal displays the shutdown verification screen. Keep holding the red key until the C680 terminal shuts down. NOTE Charging the Battery NOTE • The 4-second shutdown delay that prevents terminal shutdown if the red key is accidentally held down. The time required to hold the red key down to shut down the terminal is configurable (for more information, see the C680 Reference Guide – VPN VPN DOC269-004-EN). • The screen is blank when the terminal has no power. The battery has a safety circuit to protect the Li-ion cells from overcharging and over-discharging. If the battery is over-discharged, the safety circuit shuts down the battery. The battery must then be recharged to restore operation. The terminal automatically shuts off when the battery reaches the critically low charge state. If this occurs, the battery must be recharged for a minimum of 1/2 hour before it can power the terminal. It may take several recharge attempts to reset the safety circuit when charging a battery that has been discharged below this critical state. Battery Life Charging and discharging the battery hundreds of times will wear out the battery. Significantly reduced operating times indicate the need for battery replacement (see Accessories and Documentation for ordering information). WARNING Do not dispose of batteries in a fire. Li-ion batteries must be recycled or disposed of properly. Do not dispose of Li-ion batteries in municipal waste sites. Conducting Smart Card Transactions The smart card transaction procedure may vary from one application to another. Verify the procedure with your application provider before performing a smart card transaction. To Conduct a Smart 1 Card Transaction Position a smart card with the contacts facing upward. Figure 11 20 C680 INSTALLATION GUIDE Smart Card Transaction S ETUP Using the Magnetic Card Reader 2 Insert the smart card into the smart card reader slot in a smooth, continuous motion until it seats firmly. 3 Remove the card only when the application indicates the transaction is complete. CAUTION Using the Magnetic Card Reader Do not remove the smart card in the card reader until the transaction is complete. Premature card removal will invalidate the transaction. The C680 terminal supports credit/debit card transactions. Figure 12 To Conduct a Credit 1 or Debit Card Transaction Credit/Debit Card Transaction Position a magnetic card with the stripe in the card reader and facing inward, toward the keypad. 2 To ensure a proper read of the magnetic swipe card, the user should insert the magnetic card from the top of the unit, as shown in the following illustration. 3 Swipe the card through the magnetic card reader. Conducting a Contactless Transaction The C680 terminal supports contactless transactions through an integrated contactless module. The terminal only becomes active for contactless smart card transactions when initialized by an application. Figure 13 Conducting Contactless Transactions C680 INSTALLATION GUIDE 21 S ETUP Periodic Inspection To Conduct a 1 Contactless Transaction Gently tap the card onto or hold the card (within 4 cm) against the surface of the display. 2 An activated LED visual on the display accompanied by a short beeping sound indicates a successful transaction. Periodic Inspection NOTE 22 C680 INSTALLATION GUIDE Periodically inspect the terminal for possible tampering. Signs of tampering include: • Wires protruding out of the device. • Foreign objects inserted into the smart card or mag stripe slot. • Signs of damage to the tamper-evident labels. • Warning message on the device display. If any device is found in tamper state, please remove it from service immediately. Keep it available for potential forensics investigation and notify your company security officer and your local Verifone representative or service provider. For contacting Verifone, refer to Verifone Service and Support. CHAPTER 3 Specifications and Maintenance This chapter discusses power requirements, dimensions, other specifications of the terminal, and maintenance. Power Pack 5 VDC 2.2 A (11W), compliant with ERP/EUP Stage 2. a Input rated: 100-240 VAC, 50/60 Hz b Output rated: 5 VDC 2.2 A Temperature Operating Environment • Temperature: 0°C to 40° C (23°F to 104° F) • Relative humidity: 5% to 95% RH non-condensing Non-Operating Environment • temperature: -20°C to 50° C (-4°F to 122° F) • Relative humidity: 5% to 95% RH non-condensing External • Dimensions • Maintenance Length: 172.86 mm (6.8 in) Width: 82.25 mm (3.2 in) • Depth: 59.3 mm (2.3 in) • Weight: 352 g The C680 terminal and base have no user-serviceable parts. Cleaning the To clean the terminal and base, use a clean cloth slightly dampened with water Terminal and a drop or two of mild soap. For stubborn stains, use alcohol or an alcoholbased cleaner. CAUTION Never use thinner, trichloroethylene, or ketone-based solvents. These may cause deterioration of plastic or rubber parts. Do not spray cleaners or other solutions directly onto the keypad or terminal display. C680 INSTALLATION GUIDE 23 S PECIFICATIONS AND M AINTENANCE Maintenance Terminal Contacts Gently swab the contacts with alcohol or contact cleaner to remove the dirt. It is important that the exposed contacts of the battery stay clean and unbent. CAUTION Avoid touching the contacts of the battery and the recessed area on the terminal. Finger oils tarnish contacts, causing bad connections. When operating on battery power and experiencing a high occurrence of bad or incomplete data transfers, clean the contacts. Smart Card Reader Do not attempt to clean the smart card reader. Doing so may void any warranty. For smart card reader service, contact your Verifone distributor or service provider. 24 C680 INSTALLATION GUIDE CHAPTER 4 Verifone Service and Support For terminal problems, contact your local Verifone representative or service provider. For product service and repair information: Returning a Terminal for Service NOTE • USA – Verifone Service and Support Group, 1-800-Verifone (837-4366), Monday - Friday, 8 A.M. - 8 P.M., Eastern time • International – Contact your Verifone representative Before returning a terminal or base to Verifone, you must obtain an MRA number. The following procedure describes how to return one or more terminals or bases for repair or replacement (U.S. customers only). Customers outside the United States are advised to contact their local Verifone representative for assistance regarding service, return, or replacement of terminals or batteries. To Return a Terminal 1 for Service Get the following information from the printed labels on the bottom of each C680 terminal or base to be returned: • Product ID, including the model and part number. For example, “C680” and “MXXX-XXX-XX-XXX-2.” • Serial number (S/N nnn-nnn-nnn) 2 Obtain the MRA number(s) by completing one of the following: a Call Verifone toll-free within the United States at 1-800-Verifone and follow the automated menu options. • Select the MRA option from the automated message. The MRA department is open Monday to Friday, 8 A.M.–8 P.M., Eastern Time. • Give the MRA representative the information you gathered in Step 1. If the list of serial numbers is long, you can fax the list, along with the information gathered in Step 1, to the MRA department at 727-9534172 (U.S.). b Address a fax to “Verifone MRA Dept.” with the model and part number(s) • Include a telephone number where you can be reached and your fax number. c Complete the Inquiry Contact Form at http://www.verifone.com/aboutus/ contact/contact_form.cfm. C680 INSTALLATION GUIDE 25 VERIFONE S ERVICE AND S UPPORT Accessories and Documentation NOTE • Address the Subject box with to “Verifone MRA Dept.” • Reference the model and part number in the Note box. One MRA number must be issued for each terminal you return to Verifone, even if you are returning several of the same model. 3 Describe the problem(s). 4 Provide the shipping address where the repaired or replacement unit must be returned. 5 Keep a record of the following items: Accessories and Documentation Power Pack • Assigned MRA number(s). • Verifone serial number assigned to the terminal or base you are returning for service or repair (terminal serial numbers are located on the bottom of the unit. • Shipping documentation, such as air bill numbers used to trace the shipment. • Model(s) returned (model numbers are located on the Verifone label on the bottom of the terminal). Verifone produces the following accessories and documentation for the terminal. When ordering, please refer to the part number in the left column. • Verifone online store at www.store.verifone.com • USA – Verifone Customer Development Center, 800-Verifone (837-4366), Monday - Friday, 7 A.M. - 8 P.M., Eastern time • International – Contact your Verifone representative Contact your local Verifone distributor to determine which power pack fits your needs. VPN PWR265-001-01-A DC Power Pack (Universal) VPN PPR268-001-01-A 40 mm (1.57 in) diameter, 57 mm (2.24 in) wide VPN 02746-01 Cleaning Kit VPN SUB265-001-01-A Micro-USB service dongle Printer Paper Verifone Cleaning Kit Micro-USB Cable 26 C680 INSTALLATION GUIDE VERIFONE S ERVICE AND S UPPORT Accessories and Documentation Documentation C680 Certifications and Regulations Sheet DOC268-061-EN C680 Quick Installation Guide DOC268-062-EN C680 Reference Guide DOC268-064-EN Verix eVo Volume I: Operating System Programming Manual DOC00301 Verix eVo Volume II: Operating System and Communications Programmers Manual DOC00302 C680 INSTALLATION GUIDE 27 VERIFONE S ERVICE AND S UPPORT Accessories and Documentation 28 C680 INSTALLATION GUIDE CHAPTER 5 Troubleshooting Guidelines The troubleshooting guidelines provided in the following section are included to help you install and successfully configure the device. Typical examples of malfunction you may encounter while operating the device and steps you can take to resolve them are listed in this chapter. If the problem persists even after performing the outlined guidelines or if the problem is not described below, contact your local Verifone representative for assistance. NOTE The device comes equipped with tamper-evident labels. It does not come with user serviceable parts. Do not, under any circumstance, attempt to disassemble the device. Perform only the adjustments or repairs specified in this guide. For all other services, contact your local Verifone service provider. Service conducted by parties other than authorized Verifone representatives may void any warranty. CAUTION Use only a Verifone-supplied power pack. Using an incorrectly-rated power supply may damage the terminal or cause it not to work as specified. Before troubleshooting, ensure that the power supply being used to power the terminal matches the requirements specified on the bottom of the terminal. (See Specifications and Maintenance, for detailed power supply specifications.) Obtain the appropriately rated power supply before continuing with troubleshooting. Terminal Does If the terminal does not start: Not Start • Ensure that the battery charge state is not below the critically low level. • Recharge or replace the battery. • Ensure that you pressed the green ENTER/ON key for approximately 4 seconds, until the unit lights up. Does Not Show If the terminal does not show the correct/readable information: Correct/ • Recharge or replace the battery. Readable Info • Connect the terminal into a known-good power supply (if you have one) to see if this clears the problem. • If the problem persists, contact your local Verifone representative for assistance. C680 INSTALLATION GUIDE 29 TROUBLESHOOTING G UIDELINES Battery Does Not Charge Battery Does Not Charge Blank Display The terminal’s battery must initially receive a full charge to ensure proper operation. • Allow the terminal to remain connected to the power pack for 6 hours to ensure the battery receives a full charge. • Li-ion batteries are not affected by shallow charging. Furthermore, when the terminal has no external power source or battery the coin cell battery provides power to the security circuit. • Uninstalling the battery and unplugging the terminal power pack reduce the life of the coin cell battery, which does not recharge and must be replaced if drained. • Conserve battery power by turning the terminal off when not in use. Keep the Li-ion battery inserted in the terminal and power up the terminal periodically to check the battery charge. Do not let the battery charge fall below 10% for extended periods of time as this may permanently diminish the battery capacity. Recharge the battery by attaching USB end of the power pack to the terminal and plugging the other end of the power pack into a wall outlet. • The terminal automatically shuts off when the battery reaches the critically low charge state. If this occurs, the battery must recharge a minimum of 1/2 hour before it can power the terminal. It may take several recharge attempts to reset the safety circuit when charging a battery that has been discharged below this critical state. When the terminal display screen does not show the correct or clearly readable information: • The battery pack may not be connected properly. Remove and reinstall the battery pack. • Check terminal power connection. • Remove and reapply power to the terminal. • If the problem persists, contact your local Verifone service provider. Printer Does Not If the printer does not work properly: Print • Make sure the battery is properly installed in the terminal. The printer will not print if there is no battery in the terminal. 30 C680 INSTALLATION GUIDE • Check battery status or terminal power connection. The printer will not print if there is an insufficient charge remaining in the battery to complete the print operation. • Check if the printer is out of paper (slow red blinking light) and that the roll is properly installed. Open the paper roll cover and install a new roll of printer paper or ensure that the roll is feeding correctly. A solid red indicator light indicates a printer error. • Verify that the printer door is properly latched. TROUBLESHOOTING G UIDELINES Printer Paper Jam • If the problem persists, contact your Verifone distributor or service provider. Printer Paper If paper jams inside the printer: Jam • Press the button at the bottom of the terminal to unlatch the paper roll cover, then open the cover. WARNING • Remove the damaged paper from the paper roll and clear the feed mechanism. • Install a roll of printer paper, as described in Installing the Paper Roll. • If the problem persists, it may be due to poor paper quality. Install a new roll of higher-quality paper. Poor-quality paper may jam the printer. To order high-quality Verifone paper, refer to Accessories and Documentation. Keypad Does If the keypad does not respond properly: Not Respond • Check the terminal display. If it displays the wrong character or nothing at all when you press a key, follow the steps outlined in Transactions Fail to Process. Transactions Fail to Process • If pressing a function key does not perform the expected action, refer to the user documentation for that application to ensure you are entering data correctly. • If the problem persists, contact your local Verifone representative. There are several reasons why the terminal may not be processing transactions. Use the following steps to troubleshoot failures. Check the Magnetic Card Reader • Perform a test transaction using one or more different magnetic stripe cards to ensure the problem is not a defective card. • Ensure that you are swiping cards properly. With the C680 card reader, the black magnetic stripe on the card should face down and inward, toward the keypad and must be inserted from the top of the terminal. • Process a transaction manually, using the keypad instead of the card reader. If the manual transaction works, the problem may be a defective card reader. • Contact your Verifone distributor or service provider. • If the manual transaction does not work, proceed to Check the Signal Strength. Check the Smart Card Reader • Perform a test transaction using several different smart cards to ensure the problem is not a defective card. C680 INSTALLATION GUIDE 31 TROUBLESHOOTING G UIDELINES Transactions Fail to Process • Ensure that the card is inserted correctly and that the card is not removed prematurely. • Contact your Verifone distributor or service provider. • If the manual transaction does not work, proceed to Check the Signal Strength. Check the Signal Strength • On-screen signal-strength indicator displays at least one bar to indicate connectivity to radio network. • Ensure that the radio has been activated by your service provider. 32 C680 INSTALLATION GUIDE FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. **************************************************************************************************************************** This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Verifone, Inc. 1-800-Verifone www.verifone.com C680 Installation Guide Verifone Part Number DOC268-063-EN-A, Revision A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Create Date : 2015:12:01 15:13:04Z Creator : FrameMaker 7.1 Modify Date : 2016:04:25 18:27:01+08:00 XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Creator Tool : FrameMaker 7.1 Metadata Date : 2016:04:25 18:27:01+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : untitled Document ID : uuid:ee617455-76d5-4250-a733-731e3e328c28 Instance ID : uuid:eee17db2-59fb-4c01-adb1-3d6c2748e303 Page Mode : UseOutlines Page Count : 34EXIF Metadata provided by EXIF.tools