Verifone C6803GBTW Point of Sales Terminal User Manual

VeriFone Inc Point of Sales Terminal

User manual

Verifone Part Number DOC268-063-EN-B, Revision B.6RAFTREVISION B.6 C680Installation Guide
All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the writtenpermission of Verifone, Inc.The information contained in this document is subject to change without notice. Although Verifone has attempted to ensure theaccuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs arefor illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample programbefore placing the software into productive use. This document, including without limitation the examples and software programs, issupplied “As-Is.”Verifone, Inc.1-800-Verifonewww.verifone.comVerifone Part Number DOC268-063-EN-B, Revision B.6C680 Installation Guide© 2016 Verifone, Inc.RAFTREVISION B.6 Verifone, the Verifone logo, VeriCentre, and Verix are registered trademarks of Verifone. Other brand names or trademarksassociated with Verifone’s products and services are trademarks of Verifone, Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Comments? Please e-mail all comments on this document to your local Verifone Support Team.
C680 INSTALLATION GUIDE3RAFTREVISION B.6 CONTENTSPREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Conventions and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Acronym Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7CHAPTER1Terminal OverviewFeatures and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Exceptional Ease of Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Performance and Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Communication Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10CHAPTER2SetupTerminal Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Contactless Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Inside the Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Terminal Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143G Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15CDMA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Wi-Fi/BT Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Installing the SIM/SAM/R-UIM/Micro-SD Cards . . . . . . . . . . . . . . . . . . . . . . . . . 15Connection Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Cabling Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Dedicated Micro-USB Device Port Connection. . . . . . . . . . . . . . . . . . . . . . . 17Micro-USB Host Port Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Powered RS-232/4-Pin Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Powered RS-232/RJ11 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Installing the Paper Roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Installing the Dongle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Battery Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Battery Behavior (No Power Pack). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Manual Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Manual Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Conducting Smart Card Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Using the Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CONTENTS4C680 INSTALLATION GUIDERAFTREVISION B.6 Conducting a Contactless Transaction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Wireless Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Bluetooth Transactions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243G and CDMA Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Dial-up/Ethernet Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Periodic Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25CHAPTER3Specifications andMaintenancePower Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27External Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Cleaning the Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Terminal Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Smart Card Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28CHAPTER4Verifone Serviceand SupportReturning a Terminal for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Dongle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Power Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Printer Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Verifone Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Micro-USB Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31CHAPTER5TroubleshootingGuidelinesTerminal Does Not Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Does Not Show Correct/Readable Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Battery Does Not Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Blank Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Printer Does Not Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Printer Paper Jam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Transactions Fail to Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
C680 INSTALLATION GUIDE5RAFTREVISION B.6 PREFACEThis guide is your primary source of information for setting up and installing the C680 terminal.AudienceThis guide is useful for anyone installing and configuring a C680 terminal. Basic descriptions of the terminal features are also provided.OrganizationThis guide is organized as follows:Chapter 1, Terminal Overview. Provides an overview of the terminal.Chapter 2, Setup. Explains how to set up and install the terminal. Provides information on how to select a location, establish power, and how to configure optional peripheral devices.Chapter 3, Specifications and Maintenance. Discusses power requirements, dimensions, and how to maintain the terminal.Chapter 4, Verifone Service and Support. Provides information on contacting your local Verifone representative or service provider, and information on how to order accessories or documentation from Verifone.Chapter 5, Troubleshooting Guidelines. Provides troubleshooting guidelines, should you encounter a problem in terminal installation and configuration.RelatedDocumentationTo learn more about the C680 terminal, refer to the following set of documents:C680 Certifications and Regulations Sheet DOC268-061-ENC680 Quick Installation Guide DOC268-062-ENC680 Reference Guide DOC268-064-ENC680 3G Certifications and Regulations Sheet DOC268-065-ENC680 WiFi-BT Certifications and Regulations Sheet DOC268-067-ENC680 WiFi-BT Quick Installation Guide DOC268-068-ENC680 CDMA Certifications and Regulations Sheet DOC268-069-ENC680 FF Dongle Certifications and Regulations Sheet DOC268-070-ENC680 FF Dongle Quick Installation Guide DOC268-071-ENC680 TriComm Certifications and Regulations Sheet DOC268-XXX-XXC680 TriComm Quick Installation Guide DOC268-XXX-XXVerix eVo Volume I: Operating System Programmers Manual DOC00301Verix eVo Volume II: Operating System and Communications Programmers ManualDOC00302
PREFACEConventions and Acronyms6C680 INSTALLATION GUIDERAFTREVISION B.6 Conventions andAcronymsThis section describes the conventions and acronyms used in this guide.DocumentConventionsVarious conventions are used to help you quickly identify special formatting. Table 1 describes these conventions and provides examples of their use. Table 1 Document ConventionsConvention Meaning ExampleBlue Text in blue indicates terms that are cross referenced.See Conventions and Acronyms.Italics Italic typeface indicates book titles or emphasis. You must install a roll of thermal-sensitive paper in the printer.Courier The courier type face is used while specifying onscreen text, such as text that you would enter at a command prompt, or to provide an URL.http://www.verifone.comThe pencil icon is used to highlight important information.RS-232-type devices do not work with the PINpad port.The caution symbol indicates possible hardware or software failure, or loss of data.The terminal is not waterproof or dustproof, and is intended for indoor use only.The lightning symbol is used as a warning when bodily injury might occur.Due to risk of shock do not use the terminal near water.NOTECAUTIONWARNING
PREFACEConventions and AcronymsC680 INSTALLATION GUIDE7RAFTREVISION B.6 Acronym DefinitionsVarious acronyms are used in place of the full definition. Table 2 presents acronyms and their definitions. Table 2 Acronym DefinitionsAcronym DefinitionsAC Alternating CurrentCDMA Code Division Multiple AccessEMV Joint Europay, MasterCard and Visa StandardGPRS General Packet Radio ServiceGSM Global System for Mobile CommunicationHDMI High-Definition Multimedia InterfaceITP Internal Thermal PrinterLCD Liquid Crystal DisplayLED Light Emitting DiodeMRA Merchandise Return AuthorizationMSAM Micromodule-Size Security Access ModulePED PIN Entry DevicePIN Personal Identification NumberPOS Point-of-SaleQVGA Quarter Video Graphics ArrayRJ11 Registered Jack 11RS-232 Recommended Standard 232R-UIM Removable User Identity ModuleSAM Security Access ModuleSD Secure DigitalSIM Subscriber Identity ModuleTFT Thin Film TransistorUART Universal Asynchronous Transmitter/ReceiverUSB Universal Serial BusVPN Verifone Part Number
PREFACEConventions and Acronyms8C680 INSTALLATION GUIDERAFTREVISION B.6
C680 INSTALLATION GUIDE9RAFTREVISION B.6 CHAPTER 1Terminal OverviewC680 features a color screen display, fast processor, abundant memory, and PCI 4.0 security.It is a portable, battery-powered device designed to fit comfortably during handheld consumer-facing applications. It features a 3.5” TFT LCD display and spill-resistant keypad. It supports the GPRS, 3G, CDMA, Wi-Fi, and Bluetooth communications technology.Figure 1 C680 TerminalNOTEVerifone ships variants of this terminal for different markets. Your terminal may have a different configuration.
TERMINAL OVERVIEWFeatures and Benefits10C680 INSTALLATION GUIDERAFTREVISION B.6 Features andBenefitsThis terminal provides the right combination of features and functions including a triple-track magnetic stripe card reader, smart card reader, color screen display, and a quiet yet fast internal thermal printer (ITP).Exceptional Ease ofUse•Lightweight, tapered design, compact, stylish and the ergonomic balance allows convenient terminal hand-off to the consumer for PIN entry or other input.•3.5” TFT LCD display for boundless application possibilities and easy readability under various lighting conditions.•keypad provides tactile response to simplify usage and minimize finger slips.•40 mm diameter paper roll support with a trouble-free, drop-in, “clam shell” loading and dual tear bar that allow receipts to be torn in any direction.•Quiet and fast integrated thermal printer.•Vertical magnetic stripe card reader with an extended blade for optimal card reading.Performance andDurability•Fast transactions due to powerful 400 MHz ARM11 processor.•High-capacity 3.7 V, 2450 mAh Li-ion battery.•Base for drop-and-go charging.•Rounded corners and drop resistant to 3 feet on concrete floor to minimize breakage.•192 MB of memory.Security•PCI PED 4.0 approved for debit and other PIN-based transactions.•EMV Level 1 Type Approval.•Tamper-resistant construction, SSL protocols, and VeriShield file authentication.CommunicationTechnology•GPRS and 3G: Long-range wireless payment for retailers that do not have physical location limitations.•CDMA: Long-rage wireless payment for Non-GPS coverage areas.•Wi-Fi: Ideal for retailers who need multiple wireless devices and have existing IP infrastructure.•Bluetooth: Simple, plug-and-play installation for locations that need short-range wireless capability.
C680 INSTALLATION GUIDE11RAFTREVISION B.6 CHAPTER 2SetupThis chapter describes the terminal setup procedures for: •Terminal Location•Inside the Shipping Carton•Terminal Features•Installing the SIM/SAM/R-UIM/Micro-SD Cards•Connection Ports•Installing the Paper Roll•Installing the Dongle•Power Supply•Using the Battery•Battery Behavior (No Power Pack)•Charging the Battery•Conducting Smart Card Transactions•Using the Magnetic Card Reader•Conducting a Contactless TransactionTerminalLocationUse the following guidelines when selecting a location for the terminal.Ease of Use•Select a location convenient for both merchant and cardholder.•Select a flat support surface, such as a countertop or table.•Select a location near a power outlet, ECR, or computer connected to the terminal. Do not string cables or cords across a walkway for safety.EnvironmentalFactors•Do not use where there is high heat, dust, humidity, moisture, or caustic chemicals or oils.•Keep away from direct sunlight and anything that radiates heat, such as a stove or motor.
SETUPTerminal Location12C680 INSTALLATION GUIDERAFTREVISION B.6 •Do not use outdoors. ElectricalConsiderations•Avoid using the unit during electrical storms.•Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, electric motors, neon signs, high-frequency or magnetic security devices, or computer equipment).•Do not use near water or in moist conditions.•Disconnect the device from its POS terminal before cleaning.ContactlessConsiderationsAvoid having metallic objects in proximity of the contactless antenna. If you need to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic mounting plate.PIN ProtectionMeasuresThe C680 is a handover device. Always exercise extreme caution when conducting transactions, specially during PIN entry.•Hand the terminal directly to the cardholder for PIN entry.•Encourage the cardholder to hold the terminal close to avoid others from seeing the information being entered.Ensuring User PrivacyUse the following guidelines to protect the user’s privacy when he enters his personal identification number (PIN):•The area of visibility should be no larger than a cone taken from the number 5 key at an angle of 45° and covering an area of 270° directly in front of the user.CAUTIONThis unit is not waterproof or dustproof and is intended for indoor use only. Any damage to the terminal from exposure to rain or dust may void any warranty.WARNINGDo not use near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool to avoid shock or damage.
SETUPInside the Shipping CartonC680 INSTALLATION GUIDE13RAFTREVISION B.6 Inside theShipping CartonOpen the shipping carton and carefully inspect its contents for possible tampering or shipping damage. The terminal is a secure product. Tampering causes it to cease to function or to operate in an unsecured manner.Unpacking theShipping Carton To unpack the shipping carton:1Remove and inspect the following items:•Terminal•Power pack•Paper rollFigure 2 Items Inside the Box2Remove all plastic wrapping from the terminal and other components.3Remove the clear protective film from the LCD screen. 4Save the shipping carton and packing material for future repacking or moving the terminal.CAUTIONDo not use a unit that has been damaged or tampered with. The terminal comes equipped with tamper-evident labels. If a label or component appears damaged, please notify the shipping company and your Verifone representative or service provider immediately.
SETUPTerminal Features14C680 INSTALLATION GUIDERAFTREVISION B.6 TerminalFeaturesFamiliarize yourself with the terminal features before continuing with the installation process: Figure 3 C680 Terminal FeaturesThe unit offers the following features:•A 3.5” touch screen, TFT LCD display.•A set of keys that include:aA 12-key, telephone-style keypad (keypads may vary in style).bFour color-coded function keys from top to bottom ( POWER, CANCEL, CLEAR, ENTER). •A magnetic card reader, built into the right side. An icon illustrates the proper card direction, with the magnetic stripe down and facing inward, toward the keypad. •An internal thermal printer at the top front of the terminal.•A smart card reader, built into the bottom of the terminal. An icon indicates the proper card position and insertion point.•A SAM (Security Access Module) compartment, built into the bottom of the terminal inside the back compartment. TOUCHSCREENDISPLAYMAGNETIC CARD READERSMARTCARD READERTELEPHPONE-STYLEKEYPADTHERMALPRINTERNOTEVVerifone ships variants of C680 terminals to different markets. Your terminal may have a different configuration from the features described in this section.
SETUPInstalling the SIM/SAM/R-UIM/Micro-SD CardsC680 INSTALLATION GUIDE15RAFTREVISION B.6 3G SupportThe 3G variant uses Gemalto EHS6 radio module that incorporates 3G High-Speed Packet Access (HSPA) connectivity.CDMA SupportThe CDMA variant uses Telit CE910-SC module, a single-band 800 MHz CEMA 1XRTT wireless module designed for APAC networks requiring R-UIM card technology.Wi-Fi/BT SupportThe Wi-Fi/BT integrated module variant uses Broadcomm BCM43340 single chip solution, which provides SDIO interface for Wi-Fi and UART interface for Bluetooth.The module icludes an integrated WLAN RF transceiver optimized for use in Wireless LAN systems with advanced power management unit and an integrated radio transceiver optimized for use in the Bluetoth wireless systems.Installing theSIM/SAM/R-UIM/Micro-SD CardsYou may need to install or replace a GSM SIM (Subscriber Identity Module) or R-UIM (Removable User identity Module) card, one or two SAM (Security Access Module) cards, or a micro-SD card.To Install or Replace aSIM Card1Ensure that the terminal is turned off.2Place the terminal upside down on a soft, clean surface to protect the lens from scratches.3Gently push the compartment cover’s locking mechanish to release. Lift and remove the cover.Figure 4 Remove Terminal Back Cover4Lift the battery pack.NOTEC680 TriComm variant features Wi-Fi, BT, and 3G connectivity.AB
SETUPInstalling the SIM/SAM/R-UIM/Micro-SD Cards16C680 INSTALLATION GUIDERAFTREVISION B.6 5Remove the card slot cover by pushing the movable side of of the terminal with your finger or by using a screw driver to release.Figure 5 Remove Card Slot Cover6With the gold contacts facing down, insert the SIM/SAM/R-UIM card into the cardholder. Figure 6 SIM/SAM Card InstallationFor micro-SD card, slide down the card slot cover to open. Insert the SD card facing down and slide back the slot cover to lock.Figure 7 SD Card Installation7Return the card card slot cover.8Return the battery pack to its original position.9Close and screw the back compartment cover.NEPOKCOLABOPENLOCKOPENLOCKOPENLOCKOPENLOCK
SETUPConnection PortsC680 INSTALLATION GUIDE17RAFTREVISION B.6 ConnectionPortsThe terminal has one primary micro-USB port on the side used for power and/or download.There is another micro-USB connector USB Host located at the back of the terminal for peripheral connection. Powered RS-232 is supported via RJ11 for modem connection, and via a 4-pin connector debug and OS download.Figure 8 Connection PortsCablingConnectionsThe following are cabling scenarios for your unit:1Dedicated Micro-USB Device Port Connection2Micro-USB Host Port Connection.3Powered RS-232/4-Pin Connection.4Powered RS-232/RJ11 ConnectionDedicated Micro-USB Device PortConnectionThe micro-USB Device port on the side of the unit is dedicated to download/power charging. Insert the micro-USB plug end of the Host connector cable to the micro-USB port on the terminal to connect.Figure 9 Dedicated Micro USB Device PortMicro-USB HostPort ConnectionThe micro-USB Host port on the back of the unit is used for connecting peripheral devices. Insert the micro-USB plug end of the pheriperal cord to the micro-USB port on the back of the terminal to connect.4 PIN WIRE
SETUPInstalling the Paper Roll18C680 INSTALLATION GUIDERAFTREVISION B.6 Powered RS-232/4-Pin ConnectionThe powered RS-232/4-pin connector on the back of the terminal is mainly designed for 1D/2D barcode scanner.Powered RS-232/RJ11 ConnectionSimilar to 4-pin connection, powered RS-232/RJ11 connector on the back of the terminal is designed for 1D/2D barcode scanner.Installing thePaper RollA fast, quiet thermal printer is built into the terminal. Before you can process transactions that require a receipt or record, you must install a roll of thermal-sensitive paper in the printer.The ITP uses a roll of 40 mm single-ply, thermal-sensitive paper. A pink out-of-paper indicator line appears on the edge of the paper approximately 18 inches before the end of the roll. After this line appears, there is enough paper remaining on the roll to conclude at least one transaction. To Install a Paper Roll1Gently pull the latch located on top of the terminal to unlock the paper roll cover. Figure 10 Paper Roll Installation2Lift the printer cover up to open. 3Remove any partial roll of paper in the printer tray. 4Loosen the glued leading edge of the new roll of paper or remove the protective strip, if applicable. Unwind the paper roll past any glue residue.5Hold the roll so the paper feeds from the bottom of the roll.6Drop the paper roll into the printer tray.7Pull paper up past the glue residue on the paper roll.CAUTIONPoor-quality paper can jam the printer and create excessive paper dust. To order high-quality Verifone paper, refer to Accessories and Documentation.Store thermal paper in a dry, dark area and handle carefully. Impact, friction, temperature, humidity, and oils affect the color and storage characteristics of the paper. Never load a roll of paper with folds, wrinkles, tears, or holes at the edges in the print area.ABC D
SETUPInstalling the DongleC680 INSTALLATION GUIDE19RAFTREVISION B.6 8Close the paper roll cover by gently pressing directly on the cover until it clicks shut, allowing a small amount of paper past the glue residue to extend outside the printer door. 9Tear the paper off against the serrated plastic strip in the printer.Installing theDongleC680 Dongle is supported in some countries. It provides dial-up/Ethernet connectivity and offers USB and peripheral devices connection. It is shipped together with a retrofitted terminal cover to accommodate the Dongle’s Y cable. Figure 11 C680 DongleTo install the Dongle:1Remove the terminal’s original back cover to access the ports.2Insert the Dongle’s micro-USB connector to the terminal’s micro-USB port and connect the power barrel connector to the power port on the side of the terminal.Figure 12 Micro-USB and Power ConnectionCAUTIONTo prevent damaging the print roller, always gently press down on the paper roll cover to close it.
SETUPPower Supply20C680 INSTALLATION GUIDERAFTREVISION B.6 3Replace the original cover with the new retrofitted cover and slide it back in place to unexpose the ports. Screw to secure.Figure 13 Replacing Old Cover with Retrofitted Cover To Close4Plug the power pack to the power outlet to prepare the Dongle for the necessary connections (dial-up, LAN, peripheral device, and USB). See Power Supply for more information. Figure 14 Plugging the Dongle to the Power Outlet and Supported Connections to the DonglePower SupplyAfter establishing all necessary connections, connect the power pack to the terminal and into a wall outlet or powered surge protector to charge the battery for six hours or until fully charged.Each C680 terminal comes with power supply (VPN PWRXXX-001-XX-A) used to connect the terminal directly to a power outlet and to charge the battery. BAACRS-232ABWARNINGDo not plug the power pack into an outdoor outlet or operate the terminal outdoors. During a transaction, disconnecting the power by removing the battery or unplugging the terminal from a wall power while at very low battery charge may cause transaction data files not yet stored in the terminal memory to be lost.
SETUPUsing the BatteryC680 INSTALLATION GUIDE21RAFTREVISION B.6 The C680 unit comes with a universal input power pack capable of operating from voltages of 100 V to 240 V AC. Once it loads the application, the terminal starts the initial Verifone copyright screen and displays a unique copyright screen. If there is no available application in the terminal, DOWNLOAD NEEDED appears on screen after the initial Verifone copyright screen.Using theBatteryThe C680 terminal uses a single cell Li-ion battery (see Accessories and Documentation for ordering information). The internal logic of the battery prevents both overcharging and undercharging (a fault condition in which the battery level goes well below the minimum acceptable charge and the battery becomes unusable). Battery FeaturesThe following are features of the battery:•Single cell Li-ion 2450 mAH battery pack.•A safety circuit that:•Prevents cell damage from overcharge, over-discharge, or overheating.•Activates when the battery is left in an unused terminal for extended periods.NOTETo protect against possible damage caused by lightning strikes and electrical surges, consider installing a power surge protector.NOTEThe C680 terminal will only operate when the battery is installed.NOTE•C680 battery pack (PN BPK260-001-01-A) not customer changeable and therefore should not be disconnected and removed.•Li-ion batteries are not affected by shallow charging. Furthermore, when the terminal has no external power source or battery, the coin cell battery provides power to the security circuit.•Disconnecting and removing the battery, as well as unplugging the terminal power pack, reduce the life of the coin cell battery, which does not recharge and must be replaced if drained.•Conserve battery power by turning the C680 terminal off when not in use. Keep the Li-ion battery inserted in the terminal and power up the terminal periodically to check the battery charge. Do not let the battery charge fall below 10% for extended periods of time as this may permanently diminish the battery capacity. Recharge the battery by attaching the micro-USB end of the power pack to the terminal and plugging the other end of the power pack into a wall outlet.
SETUPBattery Behavior (No Power Pack)22C680 INSTALLATION GUIDERAFTREVISION B.6 Battery Behavior(No Power Pack)The terminal shifts to power pack mode and starts up automatically when the C680 is connected to a non-battery power source, regardless of the battery charge state.Manual StartupHold the green key down for about 4 seconds until the terminal displays the startup screen.The Verifone copyright screen starts and displays a unique copyright screen once the terminal loads an application. However, DOWNLOAD NEEDED appears on screen after the initial Verifone copyright screen if there is no available application in the terminal.. Manual ShutdownHold the red key down for about 4 seconds until the terminal displays the shutdown verification screen. Keep holding the red key until the C680 terminal shuts down.Charging theBatteryThe battery has a safety circuit to protect the Li-ion cells from overcharging and over-discharging. If the battery is over-discharged, the safety circuit shuts down the battery. The battery must then be recharged to restore operation.Battery LifeCharging and discharging the battery hundreds of times will wear out the battery. Significantly reduced operating times indicate the need for battery replacement (see Accessories and Documentation for ordering information).NOTEThe 4-second power-up delay prevents terminal startup if the green key is accidentally held down. The time required to hold the green key down to power up the terminal is configurable. For more information, see C680 Reference Guide – VPN DOC269-004-EN).NOTE•The 4-second shutdown delay that prevents terminal shutdown if the red key is accidentally held down. The time required to hold the red key down to shut down the terminal is configurable (for more information, see the C680 Reference Guide – VPN VPN DOC269-004-EN).•The screen is blank when the terminal has no power.NOTEThe terminal automatically shuts off when the battery reaches the critically low charge state. If this occurs, the battery must be recharged for a minimum of 1/2 hour before it can power the terminal. It may take several recharge attempts to reset the safety circuit when charging a battery that has been discharged below this critical state.WARNINGDo not dispose of batteries in a fire. Li-ion batteries must be recycled or disposed of properly. Do not dispose of Li-ion batteries in municipal waste sites.
SETUPConducting Smart Card TransactionsC680 INSTALLATION GUIDE23RAFTREVISION B.6 ConductingSmart CardTransactionsThe smart card transaction procedure may vary from one application to another. Verify the procedure with your application provider before performing a smart card transaction.To Conduct a SmartCard Transaction1Position a smart card with the contacts facing upward.Figure 15 Smart Card Transaction2Insert the smart card into the smart card reader slot in a smooth, continuous motion until it seats firmly.3Remove the card only when the application indicates the transaction is complete. Using theMagnetic CardReaderThe C680 terminal supports credit/debit card transactions.Figure 16 Credit/Debit Card TransactionTo Conduct a Creditor Debit CardTransaction1Position a magnetic card with the stripe in the card reader and facing inward, toward the keypad.2To ensure a proper read of the magnetic swipe card, the user should insert the magnetic card from the top of the unit, as shown in the following illustration.CAUTIONDo not remove the smart card in the card reader until the transaction is complete. Premature card removal will invalidate the transaction.
SETUPConducting a Contactless Transaction24C680 INSTALLATION GUIDERAFTREVISION B.6 3Swipe the card through the magnetic card reader.Conducting aContactlessTransactionThe C680 terminal supports contactless transactions through an integrated contactless module. The terminal only becomes active for contactless smart card transactions when initialized by an application.Figure 17 Conducting Contactless Transactions To Conduct aContactlessTransaction1Gently tap the card onto or hold the card (within 4 cm) against the surface of the display.2An activated LED visual on the display accompanied by a short beeping sound indicates a successful transaction.WirelessTransactionsTo conduct a wireless transaction, ensure that the terminal is in optimal position for transmitting. Follow the on-screen instructions provided on your application.BluetoothTransactionsTo conduct a Bluetooth transaction, ensure that the terminal is paired with another Bluetooth device not more than 100 meters away. Follow the on-screen instructions provided on your application.To improve the range performance of the terminal, place the Bluetooth device in a location that services all of the card payment areas in the premises. Ideally, place within the line of sight of all areas of card acceptance.3G and CDMAConnectivityTo connect to existing 3G/CDMA operator-provided infrastructure, check that valid SIM is inserted. See Installing the SIM/SAM/R-UIM/Micro-SD Cards.Dial-up/EthernetConnectivityThere are specific markets that require the use of a C680 FF Dongle, which provides dial-up/Ethernet connectivity. When these are properly configured, connection to the network is made available.1Check that the Dongle is properly installed. See Installing the Dongle for more information.2Ensure that RJ11 cable is plugged to the telephone port on the Dongle and the other end is plugged to the telephone jack on the wall.
SETUPPeriodic InspectionC680 INSTALLATION GUIDE25RAFTREVISION B.6 3Ensure that RJ45 cable is plugged to the LAN port on the Dongle and the other end is plugged to the network port on the wall. 4Ensure that connections are properly created and configured before connecting.PeriodicInspectionPeriodically inspect the terminal for possible tampering. Signs of tampering include:•Wires protruding out of the device.•Foreign objects inserted into the smart card or mag stripe slot.•Signs of damage to the tamper-evident labels.•Warning message on the device display.NOTEIf any device is found in tamper state, please remove it from service immediately. Keep it available for potential forensics investigation and notify your company security officer and your local Verifone representative or service provider. For contacting Verifone, refer to Verifone Service and Support.
SETUPPeriodic Inspection26C680 INSTALLATION GUIDERAFTREVISION B.6
C680 INSTALLATION GUIDE27RAFTREVISION B.6 CHAPTER 3Specifications and MaintenanceThis chapter discusses power requirements, dimensions, other specifications of the terminal, and maintenance.Power Pack5 VDC 2.2 A (11W), compliant with ERP/EUP Stage 2.aInput rated: 100-240 VAC, 50/60 HzbOutput rated: 5 VDC 2.2 ATemperatureOperating Environment•Temperature: -5 C to 40 C (23 F to 104 F)•Relative humidity: 5% to 95% RH non-condensingNon-Operating Environment•temperature: -20 C to 50 C (-4 F to 122 F)•Relative humidity: 5% to 95% RH non-condensingExternalDimensions•Length: 172.86 mm (6.8 in)•Width: 82.25 mm (3.2 in)•Depth: 59.3 mm (2.3 in) •Weight: 352 gMaintenanceThe C680 terminal and base have no user-serviceable parts. Cleaning theTerminalTo clean the terminal and base, use a clean cloth slightly dampened with water and a drop or two of mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner.CAUTIONNever use thinner, trichloroethylene, or ketone-based solvents. These may cause deterioration of plastic or rubber parts. Do not spray cleaners or other solutions directly onto the keypad or terminal display.
SPECIFICATIONS AND MAINTENANCEMaintenance28C680 INSTALLATION GUIDERAFTREVISION B.6 Terminal ContactsGently swab the contacts with alcohol or contact cleaner to remove the dirt. It is important that the exposed contacts of the battery stay clean and unbent. Smart Card ReaderDo not attempt to clean the smart card reader. Doing so may void any warranty. For smart card reader service, contact your Verifone distributor or service provider.CAUTIONAvoid touching the contacts of the battery and the recessed area on the terminal. Finger oils tarnish contacts, causing bad connections. When operating on battery power and experiencing a high occurrence of bad or incomplete data transfers, clean the contacts.
C680 INSTALLATION GUIDE29RAFTREVISION B.6 CHAPTER 4Verifone Service and SupportFor terminal problems, contact your local Verifone representative or service provider. For product service and repair information:•USA – Verifone Service and Support Group, 1-800-Verifone (837-4366), Monday - Friday, 8 A.M. - 8 P.M., Eastern time•International – Contact your Verifone representative Returning aTerminal forServiceBefore returning a terminal or base to Verifone, you must obtain an MRA number. The following procedure describes how to return one or more terminals or bases for repair or replacement (U.S. customers only). To Return a Terminalfor Service1Get the following information from the printed labels on the bottom of each C680 terminal or base to be returned:•Product ID, including the model and part number. For example, “C680” and “MXXX-XXX-XX-XXX-2.”•Serial number (S/N nnn-nnn-nnn)2Obtain the MRA number(s) by completing one of the following:aCall Verifone toll-free within the United States at 1-800-Verifone and follow the automated menu options.•Select the MRA option from the automated message. The MRA department is open Monday to Friday, 8 A.M.–8 P.M., Eastern Time.•Give the MRA representative the information you gathered in Step 1.If the list of serial numbers is long, you can fax the list, along with the information gathered in Step 1, to the MRA department at 727-953-4172 (U.S.).bAddress a fax to “Verifone MRA Dept.” with the model and part number(s)•Include a telephone number where you can be reached and your fax number.cComplete the Inquiry Contact Form at http://www.verifone.com/aboutus/contact/contact_form.cfm.NOTECustomers outside the United States are advised to contact their local Verifone representative for assistance regarding service, return, or replacement of terminals or batteries.
VERIFONE SERVICE AND SUPPORTAccessories and Documentation30C680 INSTALLATION GUIDERAFTREVISION B.6 •Address the Subject box with to “Verifone MRA Dept.”•Reference the model and part number in the Note box.3Describe the problem(s).4Provide the shipping address where the repaired or replacement unit must be returned.5Keep a record of the following items:•Assigned MRA number(s).•Verifone serial number assigned to the terminal or base you are returning for service or repair (terminal serial numbers are located on the bottom of the unit.•Shipping documentation, such as air bill numbers used to trace the shipment.•Model(s) returned (model numbers are located on the Verifone label on the bottom of the terminal).Accessories andDocumentationVerifone produces the following accessories and documentation for the terminal. When ordering, please refer to the part number in the left column. •Verifone online store at www.store.verifone.com•USA – Verifone Customer Development Center, 800-Verifone (837-4366), Monday - Friday, 7 A.M. - 8 P.M., Eastern time •International – Contact your Verifone representative DongleThe Dongle or the Y cable solution provides dial-up/Ethernet connectivity. It suports a Host port, a serial port, an Ethernet port, and a dial-up modem port.Power PackContact your local Verifone distributor to determine which power pack fits your needs.Printer PaperVerifone CleaningKitNOTEOne MRA number must be issued for each terminal you return to Verifone, even if you are returning several of the same model.VPN XXXXX-XXX-XX-X C680 DongleVPN PWR265-001-01-A DC Power Pack (Universal)VPN PPR268-001-01-A 40 mm (1.57 in) diameter, 57 mm (2.24 in) wideVPN 02746-01 Cleaning Kit
VERIFONE SERVICE AND SUPPORTAccessories and DocumentationC680 INSTALLATION GUIDE31RAFTREVISION B.6 Micro-USB CableDocumentationVPN SUB265-001-01-A Micro-USB service dongleC680 Certifications and Regulations Sheet DOC268-061-ENC680 Quick Installation Guide DOC268-062-ENC680 Reference Guide DOC268-064-ENC680 3G Certifications and Regulations Sheet DOC268-065-ENC680 WiFi BT Certifications and Regulations Sheet DOC268-067-ENC680 WiFi BT Quick Installation Guide DOC268-068-ENC680 CDMA Certifications and Regulations Sheet DOC268-069-ENC680 FF Dongle Certifications and Regulations Sheet DOC268-070-ENC680 FF Dongle Quick Installation Guide DOC268-071-ENVerix eVo Volume I: Operating System Programming Manual DOC00301Verix eVo Volume II: Operating System and Communications Programmers ManualDOC00302
VERIFONE SERVICE AND SUPPORTAccessories and Documentation32C680 INSTALLATION GUIDERAFTREVISION B.6
C680 INSTALLATION GUIDE33RAFTREVISION B.6 CHAPTER 5Troubleshooting GuidelinesThe troubleshooting guidelines provided in the following section are included to help you install and successfully configure the device. Typical examples of malfunction you may encounter while operating the device and steps you can take to resolve them are listed in this chapter. If the problem persists even after performing the outlined guidelines or if the problem is not described below, contact your local Verifone representative for assistance. Terminal DoesNot StartIf the terminal does not start:•Ensure that the battery charge state is not below the critically low level. •Recharge or replace the battery. •Ensure that you pressed the green ENTER/ON key for approximately 4 seconds, until the unit lights up.Does Not ShowCorrect/Readable InfoIf the terminal does not show the correct/readable information:•Recharge or replace the battery.•Connect the terminal into a known-good power supply (if you have one) to see if this clears the problem.•If the problem persists, contact your local Verifone representative for assistance.NOTEThe device comes equipped with tamper-evident labels. It does not come with user serviceable parts. Do not, under any circumstance, attempt to disassemble the device. Perform only the adjustments or repairs specified in this guide. For all other services, contact your local Verifone service provider. Service conducted by parties other than authorized Verifone representatives may void any warranty.CAUTIONUse only a Verifone-supplied power pack. Using an incorrectly-rated power supply may damage the terminal or cause it not to work as specified. Before troubleshooting, ensure that the power supply being used to power the terminal matches the requirements specified on the bottom of the terminal. (See Specifications and Maintenance, for detailed power supply specifications.) Obtain the appropriately rated power supply before continuing with troubleshooting.
TROUBLESHOOTING GUIDELINESBattery Does Not Charge34C680 INSTALLATION GUIDERAFTREVISION B.6 Battery Does NotChargeThe terminal’s battery must initially receive a full charge to ensure proper operation.•Allow the terminal to remain connected to the power pack for 6 hours to ensure the battery receives a full charge.•Li-ion batteries are not affected by shallow charging. Furthermore, when the terminal has no external power source or battery the coin cell battery provides power to the security circuit.•Uninstalling the battery and unplugging the terminal power pack reduce the life of the coin cell battery, which does not recharge and must be replaced if drained.•Conserve battery power by turning the terminal off when not in use. Keep the Li-ion battery inserted in the terminal and power up the terminal periodically to check the battery charge. Do not let the battery charge fall below 10% for extended periods of time as this may permanently diminish the battery capacity. Recharge the battery by attaching USB end of the power pack to the terminal and plugging the other end of the power pack into a wall outlet.•The terminal automatically shuts off when the battery reaches the critically low charge state. If this occurs, the battery must recharge a minimum of 1/2 hour before it can power the terminal. It may take several recharge attempts to reset the safety circuit when charging a battery that has been discharged below this critical state.Blank DisplayWhen the terminal display screen does not show the correct or clearly readable information:•The battery pack may not be connected properly. Remove and reinstall the battery pack.•Check terminal power connection.•Remove and reapply power to the terminal.•If the problem persists, contact your local Verifone service provider.Printer Does NotPrintIf the printer does not work properly:•Make sure the battery is properly installed in the terminal. The printer will not print if there is no battery in the terminal.•Check battery status or terminal power connection. The printer will not print if there is an insufficient charge remaining in the battery to complete the print operation.•Check if the printer is out of paper (slow red blinking light) and that the roll is properly installed. Open the paper roll cover and install a new roll of printer paper or ensure that the roll is feeding correctly. A solid red indicator light indicates a printer error.•Verify that the printer door is properly latched.
TROUBLESHOOTING GUIDELINESPrinter Paper JamC680 INSTALLATION GUIDE35RAFTREVISION B.6 •If the problem persists, contact your Verifone distributor or service provider.Printer PaperJamIf paper jams inside the printer:•Press the button at the bottom of the terminal to unlatch the paper roll cover, then open the cover.•Remove the damaged paper from the paper roll and clear the feed mechanism.•Install a roll of printer paper, as described in Installing the Paper Roll.•If the problem persists, it may be due to poor paper quality. Install a new roll of higher-quality paper.Keypad DoesNot RespondIf the keypad does not respond properly:•Check the terminal display. If it displays the wrong character or nothing at all when you press a key, follow the steps outlined in Transactions Fail to Process.•If pressing a function key does not perform the expected action, refer to the user documentation for that application to ensure you are entering data correctly.•If the problem persists, contact your local Verifone representative.TransactionsFail to ProcessThere are several reasons why the terminal may not be processing transactions. Use the following steps to troubleshoot failures. Check the Magnetic Card Reader•Perform a test transaction using one or more different magnetic stripe cards to ensure the problem is not a defective card.•Ensure that you are swiping cards properly. With the C680 card reader, the black magnetic stripe on the card should face down and inward, toward the keypad and must be inserted from the top of the terminal.•Process a transaction manually, using the keypad instead of the card reader. If the manual transaction works, the problem may be a defective card reader.•Contact your Verifone distributor or service provider.•If the manual transaction does not work, proceed to Check the Signal Strength.WARNINGPoor-quality paper may jam the printer. To order high-quality Verifone paper, refer to Accessories and Documentation.
TROUBLESHOOTING GUIDELINESTransactions Fail to Process36C680 INSTALLATION GUIDERAFTREVISION B.6 Check the Smart Card Reader•Perform a test transaction using several different smart cards to ensure the problem is not a defective card.•Ensure that the card is inserted correctly and that the card is not removed prematurely.•Contact your Verifone distributor or service provider.•If the manual transaction does not work, proceed to Check the Signal Strength.Check the Signal Strength•On-screen signal-strength indicator displays at least one bar to indicate connectivity to radio network.•Ensure that the radio has been activated by your service provider..
C680Installation GuideVerifone Part Number DOC268-063-EN-B, Revision B.6Verifone, Inc.1-800-Verifonewww.verifone.comRAFTREVISION B.6

Navigation menu