Verifone OMNI7KRFID CREDITCARD VERIFICATION SYSTEM User Manual User Guide ViVOpayOEM OMNI7000 cover new ai
VeriFone Inc CREDITCARD VERIFICATION SYSTEM User Guide ViVOpayOEM OMNI7000 cover new ai
Verifone >
USERS MANUAL
pay
TM
OEM
ViVOtech Corporate Headquarters
451 El Camino Real, Santa Clara, CA
95050. Phone: (408) 248 7001
www.vivotech.com
Version 1.0 April 2004 Copyright 2004 ViVOtech, Inc.
FCC Regulatory Compliance: Notices Class B Equipment: This
equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. This device
complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
* ViVOtech, ViVOpay, ViVOpay OEM are trademarks or registered trademarks of ViVOtech
Corporation. VeriFone and OMNI are trademarks or registered trademarks of VeriFone
Corporation. All other trademarks or brand names are the properties of their respective
holders. Features and specifications are subject to change without notice.
!
WARNING:
1.The ViVOpay hardware or software can not be replaced or modified by any third party
other than VIVOtech.
2. Minimum separation distance between 2 ViVOpay devices should be at least 2 feet.
3.The device should be mounted and seated on a non metal surface and be at least 6
inches far from any metal surface.
For VeriFone® OMNI® 7000
USER GUIDE
ViVOpay OEM USER GUIDE
The ViVOpay OEM module is equipped with 2 LEDs on the top to provide consumers
feedback on the read process. Further feedback is given by the VeriFone OMNI
7000 POS system.
Idle: Just first LED is ON.
Read SUCCESS: 2nd LED ON and beep
from the VeriFone OMNI 7000 device.
3. The ViVOpay OEM antenna quickly reads the information from
the card through RF technology - no physical contact is
necessary. In a fraction of a second the reader validates the card,
and secures the transaction.
4. ViVOpays OEM module automatically sends the information to
the VeriFone OMNI 7000 POS.
5. The VeriFone OMNI 7000 POS displays the card data and the
clerk proceeds to approve the transaction and print the receipt,
which the clerk gives to the consumer for signature as with any
other purchase.
Consumers just need
to hold their Paypass
devices in front of
the ViVOpay
The merchant operation of the ViVOpay OEM module is very simple and almost entirely
driven by the VeriFone OMNI 7000 POS. Once installed, the clerk's role on the operation of
the system is simply to guide new customers to hold their contactless RF-enabled cell
phones, plastic cards or key chains in front of the ViVOpay OEM reader module. The
information is automatically transferred to the VeriFone OMNI 7000 POS system and
processed in the same way a standard magnetic card would be.
Typical Usage
ViVOtech Corporate Headquarters
451 El Camino Real, Santa Clara, CA
95050. Phone: (408) 248 7001
Audio-Visual Feedback
How it Works
Contactless devices can have innumerous form factors as cell phone covers, plastic cards
and key chains, enabled with RF tags that securely release the payment information to the
ViVOpay OEM module without the need of physical contact with the Point of Sale terminal
using contactless technology. The ViVOpay OEM module is constantly emitting a magnetic
field, when it detects an RF tag in the field, it communicates with it and retrieves the
payment information. The card information is then transmitted to the VeriFone OMNI 7000
POS device via data packets on a serial connection with the VeriFone POS device.
www.vivotech.com
1. The customer approaches the clerk with one or more items to purchase. The clerk enters
the total value into the OMNI 7000, asks the consumer for the form of payment, and
mentions the contactless payment option by pointing to the ViVOpay OEM module on top of
the OMNI 7000.
2. The consumer pulls his or her contactless device and holds it in front of the ViVOpay OEM
antenna.
The card number will appear in the
VeriFone OMNI 7000 LCD screen.