Contents
- 1. Users Manual
- 2. User Manual
User Manual
P400/P400 PLUS Installation Guide O T V NF Verifone Part Number DOCXXX-00X-EN-A, Revision A.3 P400/P400 PLUS Installation Guide © 2015 Verifone, Inc. All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written permission of Verifone, Inc. The information contained in this document is subject to change without notice. Although Verifone has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are for illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample program before placing the software into productive use. This document, including without limitation the examples and software programs, is supplied “As-Is.” Verifone and the Verifone logo, are registered trademarks of Verifone. Other brand names or trademarks associated with Verifone’s products and services are trademarks of Verifone, Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Comments? Please e-mail all comments on this document to your local Verifone Support Team. Verifone Inc. 1-800-Verifone www.verifone.com Verifone Part Number DOCXXX-00X-EN-A, Revision A.3 CONTENTS P R EF AC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Guide Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acronym Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C HA P TE R 1 Overview P400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 O T V NF Front Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Back Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 C HA P TE R 2 Setup Selecting Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contactless Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ensuring User Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpacking Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSAM/MicroSD Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing or Installing MSAMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing or Installing a MicroSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching a Cable Connector to the P400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connection to Another Verifone Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . RS-232 Connection Using an External Power Brick . . . . . . . . . . . . . . . . . . . Direct USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB–Download Support using an External Power Brick . . . . . . . . . . . . . . . Ethernet Connection with External Power Brick . . . . . . . . . . . . . . . . . . . . . . Smart Card Reader Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Magnetic Card Reader Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contactless Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Privacy Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stylus and Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting P400 to a Flat Surface (Without a Mounting Adapter) . . . . . . . . . Mounting P400 with Mounting Adapter to a Vertical Bracket . . . . . . . . . . . . 11 12 12 12 13 13 14 14 14 14 15 15 15 15 15 16 16 17 17 17 18 18 18 18 19 19 C HA P TE R 3 Specifications Unit Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 P400/P400 PLUS INSTALLATION GUIDE Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Primary Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAM Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 21 21 21 21 21 21 21 22 C H AP T ER 4 Troubleshooting Display Panel Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Guidelines Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Transactions Fail To Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 O T V NF C H AP T ER 5 Service and Support Maintenance and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Service Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Privacy Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 26 27 27 27 27 27 27 A P P EN DI X A P400 Caution and Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 P400/P400 PLUS INSTALLATION GUIDE PREFACE This guide is the primary source of information for setting up and installing a P400 device. Audience Organization This guide provides simple descriptions of the P400 features, as well as basic information for installing and configuring the P400. This guide is organized as follows: Chapter 1, Overview. Provides an overview of a P400 device. O T VNF Chapter 2, Setup. Explains how to set up and install the P400, as well as to establish connections with other devices. Chapter 3, Specifications. Discusses the power requirements and dimensions of P400. Chapter 4, Troubleshooting Guidelines. Provides troubleshooting tips. Chapter 5, Service and Support. Provides information on contacting your Verifone service provider, ordering accessories or documentation from Verifone, and maintaining the P400 unit. Related Documentation Appendix A, P400 Caution and Warning Messages. Shows the UL/cUL certification-compliant translations of all Warning and Caution messages in this installation guide. To learn more about the P400 device, please refer to the following documents and their associated Verifone Part Numbers (VPN): P400 Certifications and Regulations VPN DOC435-001-EN P400 Quick Installation Guide VPN DOC435-002-EN P400/P400 PLUS INSTALLATION GUIDE P REFACE Guide Conventions Guide Conventions Please refer to the following document conventions for quickly identifying special formatting. Table 1 describes these conventions and provides examples of their use. Table 1 Convention Document Conventions Meaning Example Blue Text in blue indicates terms that are cross-references. See Guide Conventions. Italics Italic typeface indicates book titles or emphasis. You must not use this unit underwater. The pencil icon is used to highlight important information. RS-232-type devices do not work on the P400 communication port. NOTE O T VNF CAUTION The caution symbol indicates hardware or software failure, or loss of data. The unit is not waterproof or dustproof, and is intended for indoor use only. WARNING The lightning symbol is used as a warning when bodily injury might occur. Due to risk of shock do not use the unit near water. Acronym Definitions Please refer to Table 2 for the acronyms used in this manual. Table 2 Acronym Definitions Acronym Definitions 3DES Triple Data Encryption Algorithm AC Alternating Current ANSI American National Standards Institute cUL Underwriters' Laboratories of Canada DC Direct Current DUKPT Derived Unique Key Per Transaction Method as defined in the VISA’s POS Equipment Requirement: PIN processing and Data Authentication, International Version 1.0, August 1988 ECR Electronic Cash Register EMV Europay, MasterCard, and Visa ISO International Organization for Standardization MRA Merchandise Return Authorization MSAM Multiple Secure Access Module LAN Local Area Network LCD Liquid Crystal Display LED Light-Emitting Diode PED PIN Entry Device P400/P400 PLUS INSTALLATION GUIDE P REFACE Guide Conventions Table 2 Acronym Definitions (continued) Acronym Definitions PIN Personal Identification Number POS Point-of-Sale RS-232 Recommend Standard number 232 SAM Secure Access Module UL Underwriters Laboratories USB Universal Serial Bus VPN Verifone Part Number O T V NF P400/P400 PLUS INSTALLATION GUIDE P REFACE Guide Conventions O T V NF P400/P400 PLUS INSTALLATION GUIDE CHAPTER 1 Overview This chapter provides the description and enumeration of features for the P400. P400 The P400 is Verifone’s next generation integrated retail PINpad device. Its touchscreen functionality and sophisticated design is perfect for high-end retail establishments. O T V NF Although the P400 is a consumer facing handheld device, it can also be fix mounted in some integrated retail scenarios. Given this, the product’s design is equally appealing as a handheld PINpad and robust enough to look and function appropriate in a fixed mount setting. Front Functions The P400 includes the following features: • Capacitive touch LCD display • Secure keypad supporting 3x5 matrix containing 0-9, *, #, Cancel, Backspace/ Clear, and Enter keys. • Supports telco-style format • Dual-function Backspace/Clear key. • Customer-entry for Cancel and Enter keys. Back Functions The rear of the P400 device shows the following: • Cable connector compartment. • Threaded grommets for attaching the wall mount adapter. • A uSD and a dual-stack MSAM connectors built into the back of the unit to support stored-value card programs or other merchant card requirements. Features and Exceptional Ease of Use and Ergonomics Benefits • Sleek and stylish shape occupies minimal counter space. • Bold, ergonomic design fits comfortably in the palm of a hand. • Large, hard-rubber keys provide improved tactile feedback, minimizing errors and maximizing ease-of-use for consumers of all ages. • Intuitive telco-style interface and colored control keys simplify training and reduce support requests. • 320 (RGB) x 480 TFT (HVGA) display with a capacitive touch panel. • Rugged and reliable design. P400/P400 PLUS INSTALLATION GUIDE O VERVIEW Features and Benefits • Connects with most POS payment terminals. • Supports payment transactions in a variety of payment environments. Critical Security Protection 10 • Offers a choice of Master/Session or DUKPT key-management methods to protect PIN-based transactions. • Offers secure, reliable PIN input for expanding range of PIN-based transactions. • PCI-compliant for secure solutions, meeting the PED standard. • Meets ISO and ANSI standards for PIN encryption, key management, and MAC. O T V NF • Key injection simplified and secured with Verifone’s SecureKit key loading software. • Rugged and reliable design absorbs hard knocks found at point-of-sale counters. • Removable privacy shield offers option of supplemental physical security. • Connects with most POS payment terminals, PCs, and ECRs. • USB Connectivity that gives another option to connect with payment terminals, personal computers, and electronic cash registers (ECRs). P400/P400 PLUS INSTALLATION GUIDE CHAPTER 2 Setup This chapter describes the setup procedure for the P400, in the following sections: Selecting Location • PIN Protection Measures • Unpacking Shipping Carton • MSAM/MicroSD Cards • Power Supply • Cable Connections • Smart Card Reader Use • Magnetic Card Reader Use • Contactless Transactions • Optional Accessories O T VNF Selecting Location • Use the following guidelines to select the best location for the P400 device. To Select a Location Choose a location convenient for both merchant and client: • Far from heavy metal objects, • A flat support surface---such as a countertop or table, • Near a power outlet and the terminal or computer that connects to the P400. WARNING For safety, do not string cables or cords across a walkway. Environmental • Factors Do not use the unit where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. • Keep the unit away from direct sunlight and anything that radiates heat, such as a stove or a motor. • Do not use the P400 outdoors. CAUTION The P400 is not waterproof or dustproof, and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty. P400/P400 PLUS INSTALLATION GUIDE 11 S ETUP PIN Protection Measures Electrical • Considerations • WARNING Avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, electric motors, neon signs, high-frequency or magnetic security devices, or computer equipment). • Do not use the P400 unit in water or in moist conditions. • Disconnect the device from its POS terminal before cleaning. Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon signs, highfrequency or magnetic security devices, or electric motors). O T VNF Contactless Avoid having metallic objects in proximity of the contactless antenna. If you need Considerations to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic mounting plate. CAUTION Using an enclosed metal frame or mount may negatively affect contactless performance PIN Protection Measures Use the following techniques to provide effective screening of PIN-entry devices (PEDs) during the PIN entry process. You can use these methods in combination, although in some cases a single method might suffice. • 12 Position the terminal on the check-in stand in such a way as to block visual observation of the PIN-entry process. Examples include: • Visual shields designed into the check-in stand. The shields may be solely for shielding purposes, or may be part of the general check stand design. • Position the PED so that it is angled in such a way that PIN spying is difficult. • Install the PED on an adjustable stand that allows consumers to swivel the terminal sideways and/or tilt it forwards/backwards to a position that makes visual observation of the PIN-entry process difficult. • Position in-store security cameras so that the PIN-entry keypad is not visible. P400/P400 PLUS INSTALLATION GUIDE S ETUP Unpacking Shipping Carton The following table describes the two preferred mounting methods and the recommended measures to protect from PIN capture in four observation corridors: Table 3 Mounting Methods and Protection Measures Customer in Queue Customers Elsewhere On-site Cameras Use signage behind the PED Install so that customer is between PED and next in queue No action needed Do not install within view of cameras No action needed Install so that customer is between PED and next in queue No action needed Do not install within view of cameras Method Cashier PINpad without stand PINpad with stand O T VNF Verifone also recommends instruction of the cardholder regarding safe PIN-entry. This can be done with a combination of: • Signage on the PED • Prompts on the display, possibly with a click-through screen • Literature at the point of sale • A logo for safe PIN-entry process. Ensuring User Use the following guidelines to protect the user’s privacy when he enters his Privacy personal identification number (PIN): Unpacking Shipping Carton • The area of visibility should be no larger than a cone taken from the number 5 key at an angle of 45° and covering an area of 270° directly in front of the user. • You can secure PIN entry by installing a Privacy Shield. Carefully inspect the shipping carton and its contents for possible tampering or damage. CAUTION This device is a secure product and any tampering can cause it to cease to function or operate in an unsecured manner. 1 Remove the P400 unit from the shipping carton. The standard package contains the PIN pad only and does not include any other cables or accessories. Refer to Accessories and Documentation for more information about P400 related accessories. 2 Remove any protective plastic wrap and place the unit on a table or countertop. 3 Remove the clear protective film from the display. P400/P400 PLUS INSTALLATION GUIDE 13 S ETUP MSAM/MicroSD Cards 4 Replace all the packing materials, close the lid, and save the carton for repacking or moving the P400 unit in the future. WARNING MSAM/MicroSD Cards CAUTION Do not use a unit that has been tampered with or otherwise damaged. This unit comes equipped with tamper-evident label. If a label or component appears damaged, immediately notify the shipping company and your Verifone representative or service provider. You may need to install one or more multiple security access module (MSAM) cards or replace the old cards. Observe standard precautions in handling electrostatically sensitive devices. Electrostatic discharges can damage the equipment. Verifone recommends using a grounded anti-static wrist strap. O T VNF Changing or To change or install MSAM: Installing MSAMs 1 Place the terminal face down on a soft and clean surface to protect the lens from scratches. 2 Slide out and lift the compartment cover. The MSAM cardholders are now accessible. NOTE The P400 supports two MSAM cards in a stacked configuration. NOTE 3 Install the MSAM card by carefully sliding it into the slot until fully inserted. Align in the same direction as the MSAM symbol shown on the compartment case. Insert the MSAM card with the card’s gold contacts facing away from you, toward the unit. Changing or To change or install MicroSD card: Installing a MicroSD 1 Follow steps 1-2 in the Changing or Installing MSAMs section to open the Card terminal compartment door. 2 Insert the MicroSD card directly into the slot across the MSAM card holders. Power Supply Not all P400 configurations and device contexts require the use of a power supply – Verifone ships power supply with the terminal as required. Contact your Verifone representative If you have changed the context in which the terminal is used or have questions about which power supply should be used. CAUTION 14 Using an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with VPN PWR435-001-XX-X (see Specifications for detailed power supply specifications). P400/P400 PLUS INSTALLATION GUIDE S ETUP Cable Connections Disconnect the power pack cord from the power outlet before connecting a power supply. Connect and route all cables between the terminal, ECR, and PC before plugging the power pack cord into a wall outlet or surge protector. WARNING NOTE Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Disconnecting power during a transaction can cause transaction data files not yet stored in memory to be lost. Verifone recommends installing a power surge protector to protect against possible damage caused by lightning strikes and electrical surges. When the terminal has power and an application is loaded, the application starts after the initial Verifone copyright screen and displays a unique copyright screen. If no application is loaded, DOWNLOAD NEEDED appears on the display after the initial Verifone copyright screen. O T VNF Cable The P400 has seven general cabling scenarios, depending on what it connects to: Connections 1 Connection to Another Verifone Terminal 2 RS-232 Connection Using an External Power Brick 3 Direct USB Connection 4 USB–Download Support using an External Power Brick WARNING 5 USB Connection via PoweredUSB Connection Cable 6 Ethernet Connection with External Power Brick Turn off or unplug the terminal when connecting or disconnecting the device to avoid device memory corruption and data loss. Refer to the controlling device instructions for any terminal-specific warnings. Attaching a Cable Before going into each cabling scenario, the cables first have to be attached to the Connector to the P400. To attach a cable to the terminal, follow steps 1-2 in the Changing or P400 Installing MSAMs section to open the compartment door then attach the 28 pin connector of the cable to the terminal. Connection to The P400 connects to a Verifone terminal via a coiled cable Another Verifone (VPN - CBL282-036-01-A). There is a minimum power requirement for the Terminal terminal, currently specified at 4.7 W. NOTE In cases where the terminal is only able to provide 5 V DC output to power the P400, the terminal must be able to source at least 940 mA of current. Otherwise, the device may not function properly. P400/P400 PLUS INSTALLATION GUIDE 15 S ETUP Cable Connections RS-232 Connection A special dongle cable is used, where one end of the cable plugs into the P400 Using an External while the other end terminates in a DB-9 connector housing. On the housing, a Power Brick DC jack is provided to connect to an external power brick. This is a generic cable for all RS-232-based hosts (VPN - CBL282-031-XX-A). Direct USB Similarly, a USB cable (VPN - CBL282-038-XX-A) is required in standard USB Connection environments. For this cable option, the host end has a molded housing which exposes the standard USB plug. USB–Download The P400 can connect to other devices via USB while still being connected to an Support using an external power brick through the following cable configurations: External Power Brick USB Connection via Junction Box Cable O T VNF This cable option (VPN - CBL282-044-01-B) comes with a junction box that provides a mini-style Type B USB socket for connecting to the USB-based host and a DC jack for external power connection. In addition, a Type A USB socket is provided on the junction box to support application download via a USB thumb drive. USB Connection via PoweredUSB Connection Cable NOTE A PoweredUSB cable allows for devices to obtain power through their USB host instead of requiring an independent power supply or external AC adapter. Connect the cable (VPN - CBL282-033-01-A) to the P400 and plug the male USB connector into the corresponding USB port of the connecting device. There are two variants of PoweredUSB, one with 12 V DC output and another with 24 V DC. P400 only supports 12 V DC option. Power Sequence in USB Connection When the unit connected is a USB Host, ensure that it is powered on prior to connecting the USB Device. WARNING Incorrect power sequence may degrade the SoC Host port. Ethernet To connect the terminal to other devices via ethernet, use the cable with a junction Connection with box that provides a standard RJ-45 LAN socket, a mini USB port, and a standard External Power DC jack for an external power connection. Brick 16 P400/P400 PLUS INSTALLATION GUIDE S ETUP Smart Card Reader Use The junction box comes in these configurations: Cable Configuration Part Number Ethernet with RS232 Junction box with RJ-45 socket (for connecting PINPad to LAN infrastructure), Mod-10 socket & DC-in jack CBL282-006-01-B Ethernet with RS232 and Mini USB option Junction box with RJ-45 socket (for connecting PINPad to LAN infrastructure), Type B socket, Mini USB & DC-in jack CBL282-005-01-B Ethernet with RS232 and Mini USB option Junction box with RJ-45 socket (for connecting PINPad to LAN infrastructure), Type B socket, Mini USB, type A USB & DC-in jack CBL282-044-01-B O T VNF Smart Card Reader Use The smart card transaction procedure can vary depending on the application. Verify the proper procedure with your application provider before performing a smart card transaction. Conducting a Smart To conduct a smart card transaction: Card Transaction 1 Position the smart card with the gold contacts facing upward. 2 Insert the card into the smart card reader slot in a smooth, continuous motion until it seats firmly. CAUTION Magnetic Card Reader Use 3 Remove the card when the display indicates the transaction is completed. Leave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction. The P400 has a magnetic card reader that uses a triple track stripe reader. This gives the unit greater reliability over a wide range of swipe speeds and operating environments. Conducting a Credit/ To conduct a credit or debit card transaction: Debit Card Transaction 1 Position a magnetic card with the stripe facing the keypad. 2 Swipe it through the magnetic card reader. Contactless Transactions The P400 supports contactless transactions through an integrated contactless module. The terminal only becomes active for contactless smart card transactions when initialized by an application. P400/P400 PLUS INSTALLATION GUIDE 17 S ETUP Optional Accessories Performing To perform a contactless smart card transaction: Contactless Transactions 1 Gently tap the card onto or hold the card (within 4 cm) against the surface of the display. 2 An activated LED visual on the display accompanied by a short beeping sound indicates a successful transaction. Optional Accessories These accessories can be used to further enhance the device’s functionality. See Accessories and Documentation for additional information. Privacy Shield The privacy shield is used to hide the keys when entering user password in a transaction. O T V NF Installing the Privacy To install a privacy shield: Shield 1 Align the hooks on the privacy shield with the corresponding slots beside the keypad on the terminal. 2 Once the hooks are in place, gently push down on the privacy shield until it snaps into place. Stylus and Holder A stylus with holder can be attached to P400 and used as an alternative device input method. Attaching the Stylus To attach the stylus: Holder 1 Align the stylus holder’s screw holes with those found on the back of the terminal. 2 Screw the holder onto the back of the terminal as shown in the illustration below: Mounting Adapter This accessory is used to mount P400 to vertical or inclined surfaces. Attaching a Mounting To attach a mounting adapter to P400: Adapter to P400 1 Align the screw holes at the back of the terminal with the corresponding screws on the mounting adapter (this can be done with or without the stylus holder attached). 2 Screw the mounting adapter in place while keeping the terminal aligned with the mounting adapter. Mounting P400 with To mount the terminal to a wall or flat surface: Mounting Adapter to a Wall or Flat Surface 1 Ensure the mounting adapter is attached to the terminal. 2 Attach three M3 screws (not included in P400 package) to the desired surface. Make sure that they are aligned with the slots on top and at the bottom of the mounting adapter. 18 P400/P400 PLUS INSTALLATION GUIDE S ETUP Optional Accessories 3 Secure the terminal with the mounting adapter in place by aligning the holes to the M3 screws then sliding the entire assembly into place. 4 Slide the terminal down to secure it to the mounting plate. To remove the terminal, slide the terminal up and pull away from the mounting plate. Mounting P400 to a To mount the terminal to a flat surface: Flat Surface 1 Align the terminal's footers to the holes on the mounting plate. (Without a Mounting Adapter) 2 Fit the footers of the terminal into the footer holes. 3 Screw the mounting plate in place. NOTE Customized plates must have four recessed areas big enough to fit the footers of the terminal. This ensures that there is no gap between the terminal and mounting plate. O T VNF Mounting P400 with To mount the terminal with a mounting adapter to a vertical bracket: Mounting Adapter to 1 Ensure the mounting adapter is attached to the terminal. a Vertical Bracket 2 Align the three screw holes of the mounting adapter with the vertical bracket holes. 3 Screw the vertical bracket in place. Mounting Considerations Avoid having metallic objects in proximity to the contactless antenna. If you need to mount the terminal to vertical or inclined surfaces, use a flat mounting plate. CAUTION An enclosed metal frame or mount may negatively affect CTLS performance. P400/P400 PLUS INSTALLATION GUIDE 19 S ETUP Optional Accessories 20 O T V NF P400/P400 PLUS INSTALLATION GUIDE CHAPTER 3 Specifications This chapter discusses power requirements, dimensions, and other specifications of the P400 device. Unit Power P400 Requirements • 5-12 V DC, 500 mA O T VNF P400 PLUS • Temperature 5-12 V DC, 1 A • Operating temperature: 0° to 50° C (32° to 122° F) • Storage temperature: -20° to 60° C (-4° to 140° F) Humidity • Relative humidity: 5% to 90% (RH non-condensing) External Dimensions • Length: • Width: 79.60 mm (3.13 in) • Depth: 42.30 mm (1.67 in) Weight • Unit weight: Processor • ARM Cortex A9 32-bit processor Display • 3.5” portrait mode transmissive TFT 320 (RGB) x 480 (HVGA) Magnetic Card Reader • Triple track (tracks 1, 2, 3), high coercivity, bi-directional Primary Smart Card • ISO 7816-3, 1.8 V, 3 V, 5 V • Synchronous and Asynchronous cards • EMV Approved 166.70 mm (6.56 in) 274 g (9.66 oz) P400/P400 PLUS INSTALLATION GUIDE 21 S PECIFICATIONS SAM Card Reader SAM Card Reader • Two Security Access Modules (SAMs) Security • 3DES encryption, Master/Session and DUKPT key management • VeriShield file authentication • PCI PED 4.0 approved 22 O T VNF P400/P400 PLUS INSTALLATION GUIDE CHAPTER 4 Troubleshooting Guidelines This chapter lists typical malfunctions that may occur while operating a P400 device and the appropriate corrective action. If the problem persists – even after performing the outlined guidelines, or if the problem is not described, contact your local Verifone representative for assistance. NOTE O T VNF The P400 device uses a tamper-evident case and contains no user-serviceable parts. Do not, under any circumstance, attempt to disassemble the unit. Perform only those adjustments or repairs specified in this guide. For all other services, contact your local Verifone service provider. Service conducted by parties other than authorized Verifone representatives may void any warranty. Display Panel Use the following steps to check the display panel: Does Not Work 1 Check all the cable connections. 2 Check the controlling device's AC outlet to be sure the outlet is supplying sufficient power. Substitute the controlling device's power pack with another power pack. 3 The controlling device's application program might not be loaded correctly. Download the application program and try again. 4 If the problem persists, contact your local Verifone representative. Keypad Does Use the following steps to check the keypad: Not Respond 1 Check the display panel. If there are no characters, or the wrong characters are displayed, refer to Display Panel Does Not Work. 2 If the problem persists, contact your local Verifone representative. Transactions Fail To Process There are several possible reasons why the unit may not be processing transactions. Use the following steps to troubleshoot failures. Check Magnetic Card Reader • Perform a test transaction using one or more different magnetic stripe cards to ensure the problem is not a defective card. • Ensure that you are swiping cards properly (see Magnetic Card Reader Use). • Process a transaction manually using the keypad instead of the card reader. If the manual transaction works, the problem may be a defective card reader. • If the problem persists, contact your local Verifone representative. P400/P400 PLUS INSTALLATION GUIDE 23 TROUBLESHOOTING G UIDELINES Transactions Fail To Process Check Smart Card Reader 24 • Perform a test transaction using several different smart cards to ensure the problem is not a defective card. • Ensure that the card is inserted correctly (see Magnetic Card Reader Use). • Ensure the MSAM cards are properly inserted in the slots and are properly secured (see MSAM/MicroSD Cards). • If the problem persists, contact your local Verifone representative. O T V NF P400/P400 PLUS INSTALLATION GUIDE CHAPTER 5 Service and Support Maintenance and Cleaning The P400 device has no user-serviceable parts. Unless otherwise instructed, do not, under any circumstances, attempt any service, adjustments, or repairs on the unit. Disconnect the device before cleaning. To clean the unit, periodically use a clean cloth, slightly dampened with water and a drop or two of mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner. For best results, use a Verifone Cleaning Kit (refer to Accessories and Documentation). CAUTION O T VNF Never use thinner, trichloroethylene, or ketone-based solvents – they can deteriorate plastic or rubber parts. Because the P400 can be damaged by liquid, do not spray cleaners or other solutions directly onto the keypad or display. Always apply the cleaner to a cloth before cleaning the device. Service Returns For P400 equipment failures that cannot be resolved by your help desk or service department, contact one of the following hotlines for product service and repair information: • USA – Verifone Service and Support Group, 1-800-834-9133, Monday - Friday, 8 A.M. - 7 P.M., EST • International – Contact your Verifone representative Before returning P400 unit to Verifone, you must obtain a Merchandise Return Authorization (MRA) number. The following procedure describes how to return one or more P400 for repair or replacement (U.S. customers only). NOTE International customers, please contact your local Verifone representative for assistance with your service, return, or replacement. 1 Gather the following information from the printed labels on the bottom of each P400 device to be returned: • Product ID, including the model and part number. For example, “M180-08x-xx-xxx-x” • Serial number (S/N xxx-xxx-xxx) 2 Within the United States, call Verifone toll-free at 1-800-834-9133. P400/P400 PLUS INSTALLATION GUIDE 25 S ERVICE AND S UPPORT Accessories and Documentation 3 Select the MRA option from the automated message. The MRA department is open Monday–Friday, 8 A.M.–7 P.M., EST. 4 Give the MRA representative the information gathered in Step 1. If the list of serial numbers is long, you can fax the list, along with the information gathered in Step 1, to the MRA department at 1-727-953-4172 (U.S.) • Please address the fax clearly to the attention of the “Verifone MRA Dept.” • Include a telephone number where you can be reached, as well as your fax number. • You will be issued MRA number(s) and the fax will be returned to you. O T VNF NOTE One MRA number must be issued for each P400 unit you return to Verifone, even if you are returning several of the same model. 5 Describe the problem(s). 6 Provide the shipping address where the repaired or replacement unit must be returned. 7 Keep a record of the following items: Accessories and Documentation 26 • Assigned MRA number(s). • The serial number assigned to the P400 device (located at the bottom of the unit. • Shipping documentation, such as air bill numbers, used to trace the shipment. • Model(s) returned (model numbers are located on the bottom of the unit). Verifone produces accessories and documentation for the P400. When ordering, please refer to the part number in the left column. • Verifone Online Store at www.store.verifone.com • USA – Verifone Customer Development Center, 1-800-Verifone (837-4366) Monday - Friday, 7 A.M. - 5 P.M., MST • International – Contact your Verifone representative P400/P400 PLUS INSTALLATION GUIDE S ERVICE AND S UPPORT Accessories and Documentation Cables Contact your local Verifone distributor to determine which cable fits your needs. CBL282-045-XX-A USB cable (as Device). Powered from +9 V/1 A DC adaptor CBL282-038-XX-A USB cable (as Device). Powered from +5 V USB Host. CBL282-033-XXA PoweredUSB cable (as Device). Powered from +12 V PUSB Host CBL282-031-XX-A RS-232 cable (DB9). Powered from +12 V DC adaptor. CBL282-036-XX-A RS-232 cable (RJ45). Powered from Countertop (+12 V). CBL282-006-01-B Ethernet with RS232 CBL282-005-01-B Ethernet with RS232 and Mini USB CBL282-044-01-B Ethernet with RS232 and Mini USB PWR435-001-01-A DC power pack (US) PWR435-001-02-A DC power pack (UK) PWR435-001-03-A DC power pack (EU) PWR435-001-04-A DC power pack (China) PWR435-001-05-A DC power pack (Brazil) PWR435-001-06-A DC power pack (Australia) PWR435-001-07-A DC power pack (South Africa) Privacy Shield PPLxxx-xxx-xx-x Optional privacy shield Wall Mount PPLxxx-xxx-xx-x Optional wall mount adapter 02746-01 Verifone Cleaning Kit DOCxxx-xxx-EN P400 Certifications and Regulations DOCxxx-xxx-EN P400 Quick Installation Guide O T VNF Power Supply Cleaning Kit Documentation P400/P400 PLUS INSTALLATION GUIDE 27 S ERVICE AND S UPPORT Accessories and Documentation 28 O T V NF P400/P400 PLUS INSTALLATION GUIDE APPENDIX A P400 Caution and Warning Messages Table 4 Products with UL/cUL certification should include French translations of Caution and Warning notices. The following table lists all notices found in the document, their location, and the equivalent French translations. Caution and Warning Messages Notice Chapter Page English Text French Text Warning Setup page 11 For safety, do not string cables or cords across a walkway. Par mesure de sécurité, ne pas les câbles de chaîne ou de cordons à travers une passerelle. Caution Setup page 11 This unit is not waterproof or dustproof, and is intended for indoor use only. Any damage to the unit from exposure to rain or dust can void any warranty. Cet appareil n'est pas étanche ou à la poussière, et est destiné à une utilisation en intérieur. Tout dommage à l'unité de l'exposition à la pluie ou à la poussière peut annuler la garantie. Caution Setup page 12, page 19 Using an enclosed metal frame or mount may negatively affect contactless performance. L'utilisation d'un cadre métallique fermé ou de montage peut affecter négativement contact performance. Warning Setup page 12 Due to risk of electrical shock or terminal damage, do not use the terminal near water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Also, avoid using this product during electrical storms. Avoid locations near electrical appliances or other devices that cause excessive voltage fluctuations or emit electrical noise (for example, air conditioners, neon signs, highfrequency or magnetic security devices, or electric motors). Du fait d'un risque d'électrocution ou d'une détérioration du terminal, ne pas utiliser cet équipement près d'une source d'eau, par exemple près d'une baignoire, d'un lavabo, d'un évier de cuisine ou d'un bac de lavage, dans un sous-sol humide ou à proximité d'une piscine. De même, éviter d’utiliser ce produit lors des orages provoquant des coupures électriques.Éviter de placer le terminal à proximité d’appareils électriques ou autres unités pouvant entraîner des fluctuations de tension importantes ou des interférences électriques, tels que les climatiseurs, enseignes au néon, dispositifs de sécurité à haute fréquence ou équipements électriques. page 13 This device is a secure product and any tampering can cause it to cease to function or operate in an unsecured manner. Cet appareil est un produit sûr et toute manipulation peut l'amener à cesser de fonctionner ou fonctionner de manière non sécurisée. Caution Setup O T V NF P400/P400 PLUS INSTALLATION GUIDE 29 P400 Caution and Warning Messages Table 4 Notice Chapter Page Warning Setup Caution Setup English Text French Text page 14 Do not use a unit that has been tampered with or otherwise damaged. This unit comes equipped with tamper-evident label. If a label or component appears damaged, immediately notify the shipping company and your Verifone representative or service provider. Ne pas utiliser un appareil qui a été altéré ou endommagé. Cet appareil est équipé d'étiquette d'inviolabilité. Si une étiquette ou d'un composant semble être endommagé, en aviser immédiatement la compagnie maritime et votre représentant Verifone ou prestataire de services. page 14 Observe standard precautions in handling electrostatically sensitive devices. Electrostatic discharges can damage the equipment. Verifone recommends using a grounded anti-static wrist strap. Respecter les précautions standard dans la manipulation d'appareils sensibles aux décharges électrostatiques. Les décharges électrostatiques peuvent endommager le matériel. Verifone recommande d'utiliser un bracelet anti-statique à la terre. O T V NF Caution Setup Using an incorrectly rated power supply can damage the unit or cause it not to work properly. Use only a power pack with VPN PWRXXX-xxx-xx-x. Caution Setup Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Disconnecting power during a transaction can cause transaction data files not yet stored in memory to be lost. Warning Caution 30 Caution and Warning Messages (continued) Setup Setup page 15 Turn off or unplug the terminal when connecting or disconnecting the device to avoid device memory corruption and data loss. Refer to the controlling device instructions for any terminalspecific warnings. Leave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction. P400/P400 PLUS INSTALLATION GUIDE Éteignez ou débranchez le terminal pour connecter ou déconnecter le dispositif pour éviter la corruption de la mémoire de l'appareil et la perte de données. Reportezvous aux instructions de l'appareil de contrôle pour tous les avertissements spécifiques au terminal. P400 Caution and Warning Messages Table 4 Caution and Warning Messages (continued) Notice Chapter Page Warning Setup page 16 Incorrect power sequence may degrade the SoC Host port. Caution Service and Support page 25 Never use thinner, trichloroethylene, or ketonebased solvents – they can deteriorate plastic or rubber parts. Because this device can be damaged by liquid, do not spray cleaners or other solutions directly onto the keypad or display. Always apply the cleaner to a cloth before cleaning the device. English Text French Text N'utilisez jamais de diluant, le trichloréthylène ou des solvants cétoniques - ils peuvent détériorer les pièces en plastique ou en caoutchouc. Parce que cet appareil peut être endommagé par un liquide, ne pas vaporiser de nettoyage ou d'autres solutions directement sur le clavier ou l'écran. Toujours appliquer le nettoyant sur un chiffon avant de nettoyer l'appareil. O T V NF P400/P400 PLUS INSTALLATION GUIDE 31 P400 Caution and Warning Messages 32 O T V NF P400/P400 PLUS INSTALLATION GUIDE Verifone, Inc. 1-800-Verifone Tel: (800) Verifone (837-4366) www.verifone.com O T V NF P400/P400 PLUS Installation Guide Verifone Part Number DOCXXX-00X-EN-A, Revision A.3 FCC ID: B32P400 FCC ID: B32P400PLUS Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. for FCC ID: B32P400PLUS only Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. IC: 787C-P400 IC: 787C-P400PLUS Industry Canada statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. for IC: 787C-P400PLUS only Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated. (v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv) les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, et énoncée à la section 6.2.2 3), doivent être clairement indiqués. (v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract Tagged PDF : No Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : FrameMaker 9.0 Modify Date : 2015:08:07 18:22:24+08:00 Create Date : 2015:08:03 14:58:59Z Metadata Date : 2015:08:07 18:22:24+08:00 Format : application/pdf Title : untitled Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:33dde182-6521-40cc-b145-f59949d31466 Instance ID : uuid:6d339c72-e1c2-4e50-adfc-cb87c709dcf2 Has XFA : No Page Count : 36 Creator : FrameMaker 9.0EXIF Metadata provided by EXIF.tools