VeryKool USA VI1000 Smart Band User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3008891
Application ID	uaq+NhS8y+0Qst2pjAesjg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.87kB (185926 bits)
Date Submitted	2016-05-30 00:00:00
Date Available	2016-05-30 00:00:00
Creation Date	2016-05-27 17:13:34
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2016-05-27 17:13:34
Document Title	L28T_包装(中性)_说明书_A01_AI_CS6_20150923
Document Creator	Adobe Illustrator CS6 (Windows)
Document Author:	Administrator

User Manual
Product list
The Lefit wristband : 1 PCS
USB Charging clip: 1 pcs
Muanul: 1 pcs
Lefit Specifications
Size: 16.6mm（W）*10.7mm（H）,
139~195mm（perimeter of inside diameter）
Material: watch case:PC，watchband:TPU
Display: OLED, 0.91 inch, 128*32
Sensor: three-axis acceleration sensor
Vibrate Motor: Support
Bluetooth version: 4.0BLE
Battery: 55mAh
Time Display: RTC+ time synchronization
Charging mode: USB clip
Data transmission mode： Both Bluetooth
Weight: About 20g
Waterproof： IPX4
Characteristics of the Lefit
([IQRKNURK
52+*9IXKKT
H[IQRKIOXIRK
)NGXMOTM
([IQRK
NURK
([ZZUT
(KRZ
Reset
Please press the button and not release it,
until the Lefit is connected to power supply.
Charging your Lefit
1. Please make sure to charge the device first before use it.
2. Please charge your Lefit as picture below, and make sure
that the charging hole be connected right. Be careful not to
charge in the opposite direction, or it will lead the device be
short-circuit or scrap.
ap.
([ZZUT
3. The Lefit indicates the battery charge level as
when it’s charging. If not, pls check whether you charge it in
the right way and make sure the USB interface connected in
right way.
4. The Lefit can be charged directly via USB(5V). It shows
when full charged. Standby time is 150 hours
(depending on your actual usage and situation )
5. Pls do not try to take out built-in battery in case of danger.
Please use the Lefit USB charging line for charging. Please keep
using and charging it .
6. The Lefit’s Bluetooth will be off and cannot sync data when
charging.
Applications of the Lefit
1. Android APP
Support Android device with 4.0 BLE, Android system 4.3 and
above
Please scan the QR code below, download "Lefit" App to
get an better experience.
Or search”Lefit”in the Google play to get the App.
2. IOS APP
Support IOS device with 4.0 BLE, IOS 7.0 and above.
Please scan the QR code below, download "Lefit" App to get
an better experience.
Or search key word ”Lefit”in the Apple Store to get the app.
Device Initialization
The device will display
when you first use it.
Please press the button for more than 3 seconds until time
displays on the screen, that means the initialization is completed.
How to use Android APP and IOS APP
9VUXZY
Main function: upload sports and sleep data, sync time, check
steps, distance, calories, and battery usage state for every day,
every week and every month.
You can upload data, snyc time and check battery usage state
all by Synchronisation the Lefit with your phone
When using the Lefit for the first time, pls synchronise it by App
for pairing Lefit with your phone.
1. Activate Bluetooth, internet on your phone, open the App, register
it and then you’ll see the main interface, click
in the Sports
interface.
2. Quickly press the button of Lefit to light screen (do not hold the
button for a long time, in case it will switch into Sleep mode),
3. The App will display
when in syncing until it’s 100%
completed.
4. The first time synchronisation means reset for the Lefit, so after
this down, all existed data will be cleared of wristband.
Remarks: Please synchronisation your phone with Lefit everyday before 0
clock, because data of Lefit will be cleared automatically at the time daily.
How to check steps, distance, calories and sleep data by App
1. Click the The triangle icon
to choose
a date which you need to check, then click steps, distance,
calories, sleep for detail data check at that day.
2.
The user can also choose “Day””Week”
”Month” to check the data statistics.
Reminder
Main function: create, add, modify, update and delete a reminder
How to create a reminder
Click
to choose a reminder’s time and type; To choose the
reminder’s happen date by“self-defined repeat”; Click
to save the reminder.
Remarks: 20 reminders could be created at most.
Reminder Modification
1. How to modify an reminder’s mode
In the interface
, click
in one of the reminders
to turn on or turn off the reminder. When there is icon
in the reminder, the device will remind you by vibration
following the settled time. Otherwise, it will not remind you.
2. How to modify an reminder’s content
Please click
the
in the
main interface , then click
to modify the reminder content. How to operate you
can refer to 1.
3. How to delete an reminder
Click the Edit
, then click the item’s left side
Setting
My profile
User can set the username, change email account and the
password in here. Please set your personal information of
Birthday, Gender, Height, Weight to make the data more
accurate. Also you can change the measurement unit of Height
and Weight. Click the save once finishing, return for
-UGRY
Set the goals of steps, distance, calories and sleep by rolling
up and down, click the Done for confirmation, or click the
Cancel for reset. Click Save once finishing.
6XKYKZYRKKV
Click on Preset sleep to enter your desired bed and wake up
time automatically. Close it, the device will not enter the sleep
mode automatically.
:OSKLUXSGZ
Time format can be 12H or 24H .
2UMU[Z
Click log out can quit the account, or change to other account.
Display mode
Set up
Once reset the device or for the first use, it will shows
Activity mode
Interfaces of activity mode are as following:
1. Time, date, battery
2. Steps
3. Distance
4. Calories
It will display the data and reminder you once finishing targets
under the activity mode. Lighten the display by pressing the
button can open the device Bluetooth.
The device will record the intraday data, data will be zero
clearing on 24:00 automatically.
Sleep mode
Sleep mode will be shown as below:
1. Time, date, battery
2. Sleep
It will record the users’ sleep status under the sleep mode.
And it will close the reminder of steps and Bluetooth.
Switch of activity mode and sleep mode
Press the button for 3s under the activity mode, it will
vibrate you and enter the sleep mode
. Switch the
activity mode in the same way.
User can exit sleep mode by pressing the button for 3s, or
it exits according to user activity automatically.
Device shows and records the data as long as switching the
relevant mode.
Notification
Message Notification
1. Calendar event notification
2. Social media notification
3. Email notification
4. Missed calls reminder
5. Calls reminder
Caller’s name saved in your phone of English word could be
showed in screen, otherwise only the telephone No. will shows.
6. SMS reminder
7. Bluetooth disconnection reminder
Charging Reminder
When the device battery is low up to 10%, it will show
and vibrate you. You can not operate the device when it
under the low power.
Time sync
Before set up the device, if charge the device when the
power run out, it will show PLS SYNC TIME once take out
of the charging clip. Please connect with the mobile phone
and sync time.
Memory full reminder
Once the device memory up to 80%、it will vibrate to alarm
you.
Sync data reminder
When the device need to sync data, battery is going to run
out, or memory is full up to 100%, it will vibrate you when
you lighten the device.
Achieved goals reminder
Once you hit one of your daily goal, it will gently vibrate
and display “achieved”.
Event reminder
Once hit the event reminder, the device will vibrate you
and show the icon as below:
sport
sleep
eat
medicine
wake up
user-defined
Once you hit the reminder, press the button to confirm it,
if not, it will vibrate you after two minutes.
Remarks
1. Please charge the device in time when it shows low power,
and please use our standard charging clip.
2. Please do not put the device in damp environment and rainy
when charging.
3. Please do not put the device into too high or too low
temperature.
4. Please do not put the the device into the direct sunlight place
for a long time.
5. Please do not close to the fire.
6. Please do not let your device touch any sharp objects
7. Please do not misuse the device such as, do not fall,
dismantling, extrusion, puncturing, baking, burning, etc.
8. Please do not clean the device by abrasive cleaning.
9. Please do not give it to children, small parts may cause choking.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2016:05:27 17:13:34+08:00
Modify Date                     : 2016:05:27 17:13:34+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : L28T_包装(中性)_说明书_A01_AI_CS6_20150923
Creator                         : Administrator
Metadata Date                   : 2016:05:26 11:34:07+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 60
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10124 bytes, use -b option to extract)
Instance ID                     : uuid:c00ebd4d-b046-4f62-8475-132cdfd7e0c1
Document ID                     : xmp.did:D6F42BD7C815E6118EC3FF7332C582D0
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:96721f4f-5af0-4dfe-b4bb-df1772f258c0
Derived From Document ID        : xmp.did:C28BDB239461E511A36A8B1FC761F0C2
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:D8C4FD208417E411AB1E8C5CAE7245B9, xmp.iid:D6F42BD7C815E6118EC3FF7332C582D0
History When                    : 2014:07:30 08:54:58+08:00, 2016:05:09 17:31:42+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\Administrator\Desktop\QQ图片20150603134041.png, C:\Users\Administrator\Desktop\QQ图片20150603134041.png, C:\Users\Administrator\Desktop\QQ图片20150603133909.png, C:\Users\Administrator\Desktop\QQ图片20150603134125.png, C:\Users\Administrator\Desktop\QQ图片20150603134125.png, C:\Users\Administrator\Desktop\QQ图片20150603134104.png, C:\Users\Administrator\Desktop\QQ图片20150603133949.png, F:\0-----------工作目录_达\L28T\L28T iOS).jpg, F:\0-----------工作目录_达\L28T\L28T ad.jpg, F:\0-----------工作目录_达\L28S京东广告\L28s效果图20140410 副本.png, F:\0-----------工作目录_达\L28S京东广告\L28S效果图 副本5.png, C:\Users\Administrator\Desktop\未标题-1.png, F:\0-----------工作目录_达\L28T\L28T iOS).jpg, F:\0-----------工作目录_达\L28S京东广告\L28s效果图20140410 副本.png, F:\0-----------工作目录_达\L28S京东广告\L28S效果图 副本5.png, C:\Users\Administrator\Desktop\未标题-1.png, F:\0-----------工作目录_达\L28T\L28T ad.jpg
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 60.034923
Max Page Size H                 : 75.035041
Max Page Size Unit              : Millimeters
Font Name                       : AvenirLT-Light, AvenirLT-Book, AvenirLT-Medium, AdobeSongStd-Light, MicrosoftYaHei
Font Family                     : Avenir LT 35 Light, Avenir LT 45 Book, Avenir LT 65 Medium, Adobe 宋体 Std, 微软雅黑
Font Face                       : Regular, Regular, Regular, L, Regular
Font Type                       : TrueType, TrueType, TrueType, Open Type, Open Type
Font Version                    : Version 6.1; 2002, Version 6.1; 2002, Version 6.1; 2002, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106, Version 6.02
Font Composite                  : False, False, False, False, False
Font File Name                  : Avenir LT 35 Light_1.ttf, Avenir LT 45 Book_1.ttf, Avenir LT 65 Medium_1.ttf, AdobeSongStd-Light.otf, msyh.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 13

EXIF Metadata provided by EXIF.tools