ViRZTEX 80002 Wireless Remote Control Toy - TX User Manual spin racer IM 12082014

Virztex Company Limited Wireless Remote Control Toy - TX spin racer IM 12082014

Users Manual

CAUTION – ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 8 years of age. As with all electric products,
precautions should be observed during handling and use to prevent electric shock.
Spin Racer
Instruction Manual
CHECK TO MAKE SURE CONTENTS ARE COMPLETE: GETTING STARTED:
9V Battery
(not included) X1
R/C Spin Racer™ X1
Controller X1
sticker X1
Reective sticker X1
Instruction manual X1
+
-
DETAILS IDENTIFICATION: STICKER INSTRUCTION:
DIRECTION CONTROL:
TRICKS AND DRIFT:
Power On/O Switch
Turning calibration
Straight Forward
Left Spin Right Spin
Spin Counter-Clockwise
Spin Clockwise
Straight Reverse
Straight Forward
Straight Reverse
Right Forward
Right Reverse
Right Forward Right Forward
Right Forward
Right Reverse
Spin Right Forward Right Forward
+
Left Forward
8+
NOTE:
THE ANTENNA PROVIDED IS A UNIQUE ANTENNA. BY INSTALLATION OF
UNAUTHORIZED ANTENNA TO THIS EQUIPMENT. SUCH UNAUTHORIZED
INSTALLATION COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
Retractable Antenna x 1
+
+
-
-
-
+
1.5V AA size
Alkaline Battery
(not included)
X4
++
+
-
-
+
-
+
-
-
1
Assemble Antenna
to Controller.
2
Install a 9V battery in
Controller. Make sure to
follow the correct
positive (+) and negative
(-) polarities with the
corresponding
markings.
3
Install 1.15V batteries in
Spin Racer. Make sure to
follow the correct positive (+)
and negative (-) polarities
with the corresponding
markings.
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
BATTERY SAFETY INFORMATION:
FCC/EMC REQUIREMENTS:
- Batteries should always be replaced by an adult.
- Do not mix old and new batteries.
- Do not mix alkaline, standard(Carbon-Zinc), or rechargeable(Nickel-Cadmium or Nickel Metal Hydride) batteries.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the toy before being charged(if removable).
- Rechargeable batteries are only to be charged under adult supervision(if removable).
- Dierent types of batteries or new and used batteries are not to be mixed.
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited.
- Do not dispose of battery in re. Battery may explode or leak as a result.
- Remove batteries from the toy before prolonged storage.
- Disposed of used batteries properly.
- Batteries should be recycled or disposed of as per state and local guidelines.
- Please retain this information for future reference.
IMPORTANT SAFETY INFORMATION:
- Always turn R/C Spin Racer™ OFF before trying to pick it up.
- Keep the spinning wheels clear from body parts, clothings, and hairs at all times.
- Keep ngers away from spinning wheels.
- Always drive on dry, clean and at surfaces.
- Adult supervision is recommended during use.
- Adult supervision required at all times during use.
If at any time in the future you should need to
dispose of this product please note that waste
electrical products should not be disposed of
with household waste. Please recycle where
facilities exist. Check with your local authority
or retailer for recycling advice.(Waste Electrical
and Electronic Equipment Directive)
Hereby, ViRZTEX Company Ltd.,
declares that this R/C SPIN RACER™
is in compliance with the essential
requirements and other relevant
provision of Directive 1999/5/EC.
Product and colors may vary.
Carefully read the provided instruction manual as it contains important information.
Conform to product safety standard ASTM and EN71 regulatory requirements.
Please retain this information for future reference.
MADE IN CHINA
ViRZTEX Company Ltd.
1505-7,Chinachem Golden Plaza,
77 Mody Road, Tsimshatsui East,
Kowloon, Hong Kong
All rights reserved.

Navigation menu