ViVOtech 30XX Wireless Payment Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	331244
Application ID	VA3ihEAD8l3G4ISCgu5dmQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	152.04kB (1900540 bits)
Date Submitted	2003-06-09 00:00:00
Date Available	2003-06-08 00:00:00
Creation Date	2003-06-02 18:12:03
Producing Software	Adobe PDF library 5.00
Document Lastmod	2003-06-06 11:27:33
Document Title	Users Manual
Document Creator	Adobe Illustrator 10.0

3000
TM
FCC Regulatory Compliance: Notices Class B Equipment: This
pay
equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
USER GUIDE
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.This device complies
with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
WARNING:
1.The ViVOpay hardware or software can not be replaced or modified by any third party
other than VIVOtech.
2. Minimum separation distance between 2 ViVOpay devices should be at least 2 feet.
3.The device should be mounted and seated on a non metal surface and be at least 6
inches far from any metal surface.
Version 1.0April 2003Copyright 2003 ViVOtech, Inc.
TM
Proximity Payment Solutions
www.vivotech.com
SM
ViVOtech Corporate Headquarters
451 El Camino Real, Santa Clara, CA
95050. Phone: (408) 248 7001
TM
Proximity Payment Solutions
SM
ViVOpay 3000 USER GUIDE
LEDs and Sound
The merchant operation of the ViVOpay 3000 is very simple and almost entirely
automated. Once installed, the clerk's role on the operation of the system is simply to
guide new customers to hold their cell phones or plastic cards enabled with a
contactless RF chip in front of the Reader Module. The information is automatically
transferred to POS system and processed in the same way a standard magnetic card
would be.
The ViVOpay is equipped with 4 LEDs on it's translucent cover as well as sound
interface to provide consumers feedback on the read process. Upon a successful
transaction all 4 LEDs will turn on and a beep will sound to let the customer know
that the transaction is completed.
Idle: Just first LED is ON
How it Works
Contactless devices as cell phones and plastic cards are enabled with RF tags that
securely release the payment information to the ViVOpay terminals without the need
of physical contact with the Point of Sale terminal using contactless technology.The
ViVOpay is constantly emitting a magnetic field, when it detects an RF tag in the field
it communicates with it and retrieves the payment information. The card information is
then transmitted to the POS device via the Dynamic StripTM or direct serial connection.
Typical Usage
1. The customer approaches the clerk with one or more items to purchase. The clerk
enters the items into the cash register, and once done, asks the consumer for the form
of payment and mentions the contactless payment option by pointing to the ViVOpay.
Read SUCCESS: all LEDs will be turned
on while the module emits a sound
acknowledging the success.
2. The consumer pulls it's contactless cell phone or plastic card and holds it in front of
the ViVOpay.
3. The ViVOpay quickly reads the information from the card
through RF technology - no physical contact is necessary. In
a fraction of a second the reader validates the card, and
secures the transaction.
(As the reader is facing the customer and probably the clerk
won't be seeing the LEDs, a beep will let the clerk know that
the read was successful).
4. ViVOpay 3000 automatically sends the information to the
POS, which processes it as a conventional magnetic stripe
card, though with increased security.
(Besides mentioning contactless payments and pointing to
the ViVOpay unit no intervention from the clerk is necessary
during the entire procedure).
5. The POS terminal prints the receipt, which the clerk gives
to the consumer for signature as with any other purchase.
TM
Proximity Payment Solutions
www.vivotech.com
SM
Read ERROR: If there's an error while
reading a card the LEDs will not turn
On and no sound will be emitted
Consumers just need
to hold their Paypass
devices in front of
the ViVOpay
ViVOtech Corporate Headquarters
451 El Camino Real, Santa Clara, CA
95050. Phone: (408) 248 7001

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:06:06 11:27:33-06:00
Create Date                     : 2003:06:02 18:12:03-07:00
Creator                         : Adobe Illustrator 10.0
For                             : Marcelo, vivotech
Title                           : C:\Documents and Settings\Owner\My Documents\Marketing\Artwork\Collateral Material\User Guide\User_Guide_ViVO2_Nokia_cover.eps
Bounding Box                    : -258 18 1500 662
Creator Version                 : 10
Container Version               : 9
Page Count                      : 2
Creation Date                   : 2003:06:02 18:12:03-07:00
Mod Date                        : 2003:06:06 11:27:33-06:00
Producer                        : Adobe PDF library 5.00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2003:06:06 11:27:33-06:00

EXIF Metadata provided by EXIF.tools