Viessmann Vitosol 100 F Technical Manual 5354 729 V1.3

: Viessmann Viessmann-Vitosol-100-F-Technical-Manual-802326 viessmann-vitosol-100-f-technical-manual-802326 viessmann pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

VITOSOL 100-F
Flat plate solar collectors for the harnessing of solar energy
Panels with 25 ft.2 (2.32 m2) absorber surface

Technical Data Manual
Part Nos. and Pricing: see Price List

VITOSOL 100-F Model SV1B and SH1B
Flat plate solar collectors

Certified in accordance with SRCC OG-100.

for vertical or horizontal installation
on sloped and flat roofs
To produce domestic hot water, or to supplement
low-temperature heating systems or swimming pools
via a heat exchanger
Listed by CSA International as complying
with the Energy Efficiency Verification
Service requirements

5354 729 v1.3 03/2011

Meets the requirements of the German “Blue Angel”
certificate of environmental excellence to RAL UZ 73.

Certified in accordance with Solar Keymark testing
requirements.

Product Information
Vitosol 100-F
Models SV1B, SH1B
The benefits at a glance:
H High performance flat plate collector at an
attractive price, thanks to a highly-efficient
selectively-coated copper absorber.
H Suitable for many residential or
commercial applications with vertical or
horizontal versions available. Best suited
for DHW or pool heating.
H Rugged, high-quality construction using
impact-resistant low-iron solar glass, copper
piping and absorber, aluminum frame and
non-degrading thermal insulation.
H Permanently sealed and high stability
through all-around folded aluminum frame
and endless glass seal.

H Fast installation with flexible connection
pipes and quick-connect fittings.
Prefabricated collector mounting hardware
ensures easy connection to roofs.
H Maximum system performance and
reliability with a full range of solar system
components designed to integrate
seamlessly.
H Certified to the Solar Rating and
Certification Corporation (SRCC) OG-100
Standard. CSA Energy Efficiency
Verification.
H Quality tested to Solar Keymark testing
requirements. Meets the requirements of
the German “Blue Angel” certificate of
environmental excellence.

Solar glass cover, 0.13” (3.2 mm) thick
Aluminum cover strip
Continuous glass seal
Copper absorber sheet
Meander-shaped copper pipe

2

Construction and function
The main component of the Vitosol 100-F
is the black chrome coated copper absorber.
It ensures high absorption of solar radiation
and low emission of thermal radiation. A
meander-shaped copper pipe, through which
the heat transfer medium flows, is
permanently embedded into the absorber.
The heat transfer medium channels the
absorber heat through the copper pipe.
The absorber is encased in a highly insulated
collector housing, which minimizes collector
heat losses. The high quality thermal
insulation provides temperature stability
and is free from gas emissions.
The cover consists of a solar glass panel
with a very low iron content, thereby
reducing reflection losses. The solar glass
is 3.2 mm thick, making it very resistant to
weather influences.

Thermal insulation made from mineral
fiber
Non-coated aluminum frame sections
Back panel made from aluminum-zinc
coated sheet steel

The glass is set into the collector frame with
a continuous profiled seal, preventing water
from penetrating into the collector. This
ensures a long and reliable service life for
all internal components.
The collector housing consists of a
one-piece non-coated aluminum frame into
which the solar glass is permanently sealed.
Up to twelve collectors can be joined quickly
and easily to form a single collector array.
For this, the standard equipment includes
flexible connection pipes, sealed with
O-rings (see picture below).
A connection kit with clamping ring fittings
enables the collector array to be quickly
connected to the pipes of the solar circuit.
The collector temperature sensor is installed
in the solar circuit flow using a sensor well
set.

Flexible interconnection pipes

5354 729 v1.3

H Universal application on flat and sloped
roofs or freestanding, vertical or horizontal
installations, connect up to 12 collectors
in one array for commercial or residential
systems.

Technical Data
Technical Data
Model - Vitosol 100-F

SV1B

SH1B

Total surface area

ft.2 (m2)

27.0 (2.51)

27.0 (2.51)

Absorber surface area

ft.2 (m2)

25.0 (2.32)

25.0 (2.32)

Aperture *1

ft.2 (m2)

25.1 (2.33)

25.1 (2.33)

41¾
1056
93¾
2380
2¾
72

93¾
2380
41¾
1056
2¾
72

75.4

75.4

4.15
0.0114

4.15
0.0114

Dimensions *2
Width

inches
mm
inches
mm
inches
mm

Height
Depth
Optical efficiency*3

%

Heat loss coefficient U1
Heat loss coefficient U2

W/(m2 . K)
W/(m2 . K2)

Thermal capacity

kJ(m2 . K)

Weight

lb (kg)

Fluid capacity
(heat transfer medium)

4.5

4.5

96.8 (43.9)

96.8 (43.9)

USG
L

0.44
1.67

0.62
2.33

Maximum working pressure *4

psig
bar

87
6

87
6

Maximum stagnation temperature *5

ºF (ºC)

395 (196)

395 (196)

Connection

inches
mm

¾
22

¾
22

Roof construction with adequate load capacity for prevailing wind forces

Requirements for installation surface and
anchorage
*1
*2

Important for system design considerations.
Dimensions rounded to the nearest ¼ inch.
*3 Based on absorber surface area.
*4 In sealed systems, operating pressure of at least 15 psig + 0.45 psig x static head (ft.) / 1 bar + 0.1 bar x static head (m) must be
present in the collectors in cold condition.
*5 The stagnation temperature is the temperature which applies to the hottest point of the collector at a global radiation intensity of
3412 Btu/h / 1000 W when no heat is conducted by the heat transfer medium.
Model SV1B

Model SH1B
93¾”/2380 mm

2¾”/ 72 mm
CS

41¾”/1056 mm
34½”/876 mm

1½”
38 mm

3½”
90 mm

CR

CR
3½”
90 mm

5354 729 v1.3

93¾”/2380 mm
86½”/2200 mm

41¾”/1056 mm

2¾”/ 72 mm
1½”
38 mm
CS

Legend
CR Collector return (inlet)
CS Collector supply (outlet)
3

Standard Equipment/Accessories

General connection set
Required to connect solar collector to
system piping. One set required per collector
array - max. 269 ft2 (25 m2).
Part No. 7248 240

Pipe connection set
Required to connect multiple solar
collectors.
Part No. 7248 239

x2

Standard equipment

Accessories
Accessories (individually packed, depending
on order):
- Mounting hardware with technical
literature
- Interconnection pipes with insulation
- General connection set
- Sensor well set
- Solar Divicon (pumping station for the
collector circuit)
- Automatic air vent with air separator
- Fast air vent valve with tee and
shutoff valve
- System filling manifold
- Solar hand pump
- Solar expansion tank
- Heat transfer medium

Sloped roof hardware
Required for mounting collector directly onto
shingled roof. Raises collector 3½” /
(889 mm) above the roof.

Roof bracket
SCU 124/224
Electronic differential temperature control
for solar heating.
Installation rail

Flat roof hardware
Required for freestanding, flat roof
installations.

Mounting hardware
The mounting hardware consists of
components required for the relevant
method of installation, such as:
Roof brackets, mounting plates, mounting
rails, connecting elements for mounting
rails, clamping bolts, screws and nuts.

Viessmann Manufacturing Company (U.S.) Inc.
45 Access Road
Warwick, Rhode Island • 02886 • USA
1-800-288-0667 • Fax (401) 732-0590
www.viessmann-us.com • info@viessmann-us.com
4

Please note
Viessmann offers complete solar heating
system combi packages, as well as
comprehensive design support in order to
facilitate the component selection process.

Viessmann Manufacturing Company Inc.
750 McMurray Road
Waterloo, Ontario • N2V 2G5 • Canada
1-800-387-7373 • Fax (519) 885-0887
www.viessmann.ca • info@viessmann.ca

Technical information subject to change without notice.

Vitosol 100-F, Models SH1B and SV1B
come fully assembled in shrink-wrap
packaging and ready to be connected.

Solar Divicon
Preassembled pumping station for solar
collector circuit.
Includes: 3-speed pump (2 sizes), pressure
gage, 2 thermometers, 2 ball valves,
pressure relief valve, flow meter, 2
flowcheck valves, air separator, system fill
manifold, and foam insulation cover.
Part No. 7134 799 (for DN20)
7134 800 (for DN25)

5354 729 v1.3

Tyfocor non-toxic heating liquid for solar
heating systems with active anti-corrosion
and anti-ageing protection.
Frost protection:
to -31ºF (-35ºC)
Specific gravity
at 68ºF (20ºC):
1.032 to 1.035 g/cm3
to ASTM D 1122
Viscosity
at 68ºF (20ºC):
6.5 to 8.0 mm2/s
to DIN 51562
pH value:
7.5 to 8.5
to ASTM D 1287
Color:
transparent,
blue-green
Container:
5.3 USG (20 L) in a
disposable container

Printed on environmentally friendly
(recycled and recyclable) paper.

Heat transfer medium



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Author                          : ebem
Create Date                     : 2011:03:28 15:51:19Z
Modify Date                     : 2011:03:28 16:09:26-04:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : ebem
Title                           : 5354 729 v1.3
Creator Tool                    : FreePDF XP 3.24 - http://shbox.de
Metadata Date                   : 2011:03:28 16:09:26-04:00
Producer                        : AFPL Ghostscript 8.53
Document ID                     : uuid:82624c05-d85b-4df2-ab94-f19c63ce5edc
Instance ID                     : uuid:6f277f0d-ec61-4009-9e7f-ebdccb10c352
Page Count                      : 4

EXIF Metadata provided by EXIF.tools